Can't boot to completed. Reflashed OpenWrt image file on Dual Gigabit Ethernet Carrier Board for Raspberry Pi CM4 with the firmware from 2022-03-02 to 2022-05-05 .

[Mchatpoj]

I reflashed OpenWrt image file on Dual Gigabit Ethernet Carrier Board for Raspberry Pi CM4 with the firmware from 2022-03-02 to 2022-05-05 that was linked from the Seeed Wiki page; from here:
https://onedrive.live.com/?authkey=!AEcwsyZAovIBK-I&id=5219529519B9B6A1!93186&cid=5219529519B9B6A1
I see this as the final output on the display and and white light onboard is flashing . it can't boot to complete. Please ' Tell me how to correct OpenWrt on Dual Gigabit Ethernet Carrier Board for Raspberry Pi CM4 emmc boot this issue
![Uploading 18F3B84E-09FC-4B0E-A2DD-3C091897B559.jpg…]

.

[LynnL4]

Thank you for your feedback, as the CI of this project automatically merges the upstream code and compiles the firmware, we did not test every firmware. We are now tracking these changes and trying to fix them. To avoid errors, we will remove the unworking firmware and turn off CI until the problem is solved, then turn it back on. Thanks!

[kurzninja]

I am also having this same issue as well. I had to install the 2022-02-28 version to get it working and even it has issues as well. I would report the problem but it doesn't seem worth reporting on such an old version. Any suggestions?

[LynnL4]

Yes, we noticed that 2d69d09 , openwrt updated linux kernel version, which sent a conflict with some configurations of this project.We are in the process of fixing it. You can describe the problem you are facing.

[lakshanthad]

Hello,

Please try the latest firmware. The problems are fixed now.