Skip to content
Command line and python functions to control 8 Relay Board from Sequent Microsystems on Raspberry PI
C Python Makefile
Branch: master
Clone or download
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
python Changes for hardware v2 May 31, 2018
readmeres Add files via upload Apr 29, 2018
Makefile
README.md Change address for clone Aug 13, 2018
comm.c modified: comm.c Aug 11, 2018
relay.h Add -list command May 16, 2018
relay8.c modified: comm.c Aug 11, 2018

README.md

relay8-rpi

relay8-rpi

This is the command to control Raspberry Pi 8 Relay Board

Before compiling you have to install Wiring Pi, many thanks to Gordon Henderson for the library

Don't forget to enable I2C communication:

~$ sudo raspi-config

Usage

~$ git clone https://github.com/SequentMicrosystems/relay8-rpi.git
~$ cd relay8-rpi/
~/relay8-rpi$ sudo make install

Now you can access all the functions of the 8 Relay board through the command "relay8" If you clone the repository any update can be made with the following commands:

~$ cd relay8-rpi/  
~/relay8-rpi$ git pull
~/relay8-rpi$ sudo make install
You can’t perform that action at this time.