Skip to content
Branch: master
Find file History
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
..
Failed to load latest commit information.
rfm69-RF12demo-ook-TX
rfm69-ook-receive-dio2
rfm69-ook-receive-rssi
rfm69-ook-relay-rssi
.gitignore
README.md

README.md

embapps ArduinoRFM69

Various OOK receive and transmit programs for the RFM69 Using JeeLib, and aiming at the Classic JeeNode and JeeLink V3C.

##Unmodified JeeLink V3C The following sketches only require standard SPI wiring of the RFM69, and no additional soldering for DATA/DIO2 lines is required. rfm69-RF12demo-ook-TX is the classic RF12demo sketch that can send KAKU and FS20 commands. rfm69-ook-receive-rssi can receive various OOK signals by sampling the RSSI signal register. rfm69-ook-relay-rssi receives OOK signals, and the decoded signal is transmitted on the standard JeeLib RF12-packet network.

##Solder-brdige closed JeeLink V3C The next sketch is using the DIO2/DATA line, connected to D3=INT0, for example by closing the soldering bridge in the JeeLinkV3C rfm69-ook-receive-dio2

Supported decoders can be found in the decoders433.h and decoders868.h. From more backgound see http://jeelabs.org/2011/02/03/ook-relay-revisited-2/

more examples using the DIO2 line can be expected.

You can’t perform that action at this time.