#Format Version 1.0
# General simulation parameters
# -----------------------------------------------------
Number of spatial dimensions: 3
Number of time steps: 15000
Time step size: 0.00115385
Continue previous simulation: 0
Use pre-computed velocity: 1
Velocity results file path: all_results.vtu
First time step: 5000
Last time step: 6000
Increment time step: 50
Save results in a folder: 1
Increment in saving restart files: 50
Name prefix of saved files: result
Increment in saving files: 50
Start saving after time step: 1
Save averaged results: 1
Spectral radius of infinite time step: 0.2
Searched file name to trigger stop: STOP_SIM
Simulation requires remeshing: F
Verbose: 1
Warning: 1
Debug: 0
#----------------------------------------------------------------
# Mesh data
#--- You need to add all mesh entries under a "Add mesh" directive
Add mesh: lumen {
   Mesh file path (vtu):                                         ./mesh-complete/mesh-complete.mesh.vtu
   Add face: inlet               { Face file path (vtp):  ./mesh-complete/mesh-surfaces/inlet_0.vtp }
   Add face: outlet_0               { Face file path (vtp):  ./mesh-complete/mesh-surfaces/outlet_0.vtp }
   Add face: outlet_1               { Face file path (vtp):  ./mesh-complete/mesh-surfaces/outlet_1.vtp }
   Add face: outlet_2               { Face file path (vtp):  ./mesh-complete/mesh-surfaces/outlet_2.vtp }
   Add face: outlet_3               { Face file path (vtp):  ./mesh-complete/mesh-surfaces/outlet_3.vtp }
   Add face: outlet_4               { Face file path (vtp):  ./mesh-complete/mesh-surfaces/outlet_4.vtp }
   Add face: outlet_5               { Face file path (vtp):  ./mesh-complete/mesh-surfaces/outlet_5.vtp }
   Add face: outlet_6               { Face file path (vtp):  ./mesh-complete/mesh-surfaces/outlet_6.vtp }
   Add face: outlet_7               { Face file path (vtp):  ./mesh-complete/mesh-surfaces/outlet_7.vtp }
}

#----------------------------------------------------------------
# Equations
Add equation: RT {
   Coupled: 0
   Min iterations: 3
   Max iterations: 6
   Tolerance: 1D-1
   Residual dB reduction: -40
   Conductivity: 0.0

   LS type: GMRES
   {
      Max iterations:      50
      Tolerance:           1D-2
      Krylov space dimension: 150
   }
  

   Output: Spatial {
      Temperature: t
      Heat_flux: f
   }


################# IN/OUT BC
   Add BC: inlet {
     Type: Dirichlet
      Time dependence: Steady
      Value: 0D0
      Profile: Flat 
      Impose flux: 0
   }
   Add BC: outlet_0 {
     Type: Dirichlet
      Time dependence: Steady
      Value: 0D0
      Profile: Flat 
      Impose flux: 0
   }
   Add BC: outlet_1 {
     Type: Dirichlet
      Time dependence: Steady
      Value: 0D0
      Profile: Flat 
      Impose flux: 0
   }
   Add BC: outlet_2 {
     Type: Dirichlet
      Time dependence: Steady
      Value: 0D0
      Profile: Flat 
      Impose flux: 0
   }
   Add BC: outlet_3 {
     Type: Dirichlet
      Time dependence: Steady
      Value: 0D0
      Profile: Flat 
      Impose flux: 0
   }
   Add BC: outlet_4 {
     Type: Dirichlet
      Time dependence: Steady
      Value: 0D0
      Profile: Flat 
      Impose flux: 0
   }
   Add BC: outlet_5 {
     Type: Dirichlet
      Time dependence: Steady
      Value: 0D0
      Profile: Flat 
      Impose flux: 0
   }
   Add BC: outlet_6 {
     Type: Dirichlet
      Time dependence: Steady
      Value: 0D0
      Profile: Flat 
      Impose flux: 0
   }
   Add BC: outlet_7 {
     Type: Dirichlet
      Time dependence: Steady
      Value: 0D0
      Profile: Flat 
      Impose flux: 0
   }
}