diff --git a/connector/doc/Sencore_AG_5800.md b/connector/doc/Sencore_AG_5800.md
index e4c4e320..c0858659 100644
--- a/connector/doc/Sencore_AG_5800.md
+++ b/connector/doc/Sencore_AG_5800.md
@@ -15,7 +15,8 @@ This connector uses **SNMP** to retrieve and configure parameters of the Sencore
| Range | Description | DCF Integration | Cassandra Compliant |
|--|--|--|--|
| 1.0.0.x | Initial version | No | Yes |
-| 1.0.1.x [Main] | - Fixes Input Primary & Secondary Source Output, making it dynamic and mutually exclusive using labels from Transport Stream Input Source.
- Fixes Output Manual Format behavior.
- Adds Overlay Image parameters, SCTE35 info, SCTE104 Filter Mode, and ASI parameters.
- Fixes SETs for IP Address-like and Port-like parameters. | No | Yes |
+| 1.0.1.x | - Fixes Input Primary & Secondary Source Output, making it dynamic and mutually exclusive using labels from Transport Stream Input Source.
- Fixes Output Manual Format behavior.
- Adds Overlay Image parameters, SCTE35 info, SCTE104 Filter Mode, and ASI parameters.
- Fixes SETs for IP Address-like and Port-like parameters. | No | Yes |
+| 1.0.2.x [Main] | Addition of HTTP connection | No | Yes |
### Product Info
@@ -23,6 +24,7 @@ This connector uses **SNMP** to retrieve and configure parameters of the Sencore
|------------------|-----------------------------|
| 1.0.0.x | 2.5.0 |
| 1.0.1.x | 2.5.0 |
+| 1.0.2.x | 2.5.0 |
## Installation and configuration
@@ -42,6 +44,20 @@ SNMP Settings:
- **Get community string**: The community string used when reading values from the device, by default *public*.
- **Set community string**: The community string used when setting values on the device, by default *private*.
+#### HTTP Connection (1.0.2.X)
+
+This connector uses an HTTP connection and requires the following input during element creation:
+
+HTTP CONNECTION:
+
+- **IP address/host**
+- **IP port**:
+
+HTTP Settings:
+
+- **Username**: The username to request the SID.
+- **Password**: The password used on the request to get the SID.
+
## Usage
### General