Basic Manual

yichone edited this page Jun 2, 2017 · 3 revisions


DT-06 (TTL-WiFi module) is designed and developed based on ESP-M2 WiFi module from our company Shenzhen Doctors of Intelligence & Technology Co., Ltd., which is extracted the TTL, EN, STATE and other pins. Importantly, the TTL-WiFi is already built-in the serial transparent transmission firmware programmed by our company (SZdoit), which can realize the transparent transmit the data to the cloud on the real-time, together with low-power control, status indictor. This board can replace the old wiring serial WiFi device to realize the data collection and control. It has the following features.

  • Fully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth;
  • Built-in the industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;
  • Built-in the high performance WiFi module ESP-M2 with size: 34mm17mm4mm;
  • Working voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V);
  • Provided pins: STATE, TXD, RXD,EN;
  • Average current: 80mA; when data sent, it is 170mA; but it is 20μA at deep sleep mode;
  • Support serial AT command;
  • Support re-programmable, OTA firmware update;
  • Seamless transparent transmission between serial and WiFi;
  • Built-in HTTP Web Server, support configure parameters by web page;
  • Support re-connect automatically at WiFi STA mode and TCP Client;
  • Support set baud rate, data bit, parity check, stop bits, and/or subcontracting time;
  • Support baud rate (bps): 300/600/1200/2400/4800/9600/19200/38400/57600/74800/115200/
  • 230400/460800/921600/1843200/3686400;
  • Support AP enable, self-defined SSID/password, self-defined IP and network duration;
  • Automatically scan the peripheral WiFi hotspot, support STA enable, DHCP, self-defined IP;
  • Support TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast;
  • Support DNS resolution automatically for the remote sever address;
  • Support checking the status by AT command;
  • Provide IO4 to show the WiFi status;
  • Working temperature: -40℃-125℃;
  • Applications: smart home, wireless data connection and transparent transmission, smart car control, wireless serial printer, LED light industrial control etc.

How to use: Click me download the datasheet

How to Buy: Click me to buy

Clone this wiki locally
You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.
Press h to open a hovercard with more details.