Many household devices communicate via Bluetooth and can be integrated with Home Assistant, for example:
- ⚖️ a smart scale,
- 💪 a connected blood pressure monitor,
- 💧 soil moisture sensors for plants,
- 📍 beacons for presence detection,
and many other devices using Bluetooth.
The benefit of integrating them with Home Assistant is that you can retrieve their information and use it in your home automation system. For example, a Bluetooth scale can transmit your weight to Home Assistant, or a plant moisture sensor can be used to monitor the moisture level of the soil.
The simplest and most natural solution is to use the machine's built-in Bluetooth if available, or add a USB Bluetooth adapter to the machine running Home Assistant.
For example:
The Bluetooth dongle is then used directly by Home Assistant to communicate with Bluetooth devices, this solution works very well when the Bluetooth devices are located close to the Home Assistant server.
But there is one problem: range.
Bluetooth is a radio technology with a limited range. If the Home Assistant server is located in an office, garage, utility cupboard, or another room, Bluetooth devices located farther away may be difficult or even impossible to reach.
The range varies greatly depending on the circumstances, but it rarely exceeds 10 m.
A Bluetooth Proxy makes it possible to add Bluetooth wherever Wi-Fi is available. It is a small electronic device, usually based on an ESP32 controller, which connects to your home's Wi-Fi network and acts as a gateway between Bluetooth devices and Home Assistant.
In practice, instead of having to place Home Assistant or a Bluetooth dongle close to the devices you want to control or monitor, the Bluetooth Proxy listens for Bluetooth communications around it and forwards the information to Home Assistant.
It is also possible to equip each Bluetooth Proxy with an LED, a buzzer, or both, to provide visual or audible feedback to the user.
For example:
-
⚖️ flash a LED when a measurement from a connected scale has been successfully received and recorded by Home Assistant,
-
💪 emit an audible signal when a blood pressure reading from a Bluetooth monitor has been processed by Home Assistant,
-
📍 confirm the detection of a Bluetooth beacon,
-
🔔 indicate that an automation has been executed,
-
✅ show that a Bluetooth device is connected or that data has been successfully received.
-
...
Each Bluetooth Proxy also includes a reset button.
I wrote this article on October 2, 2026, if anything is unclear or if you think something could be explained better, I would be happy to hear your feedback.



