BSP for the MBED LPC1768
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
.settings
boot
doc
src
.cproject
.gitignore
.project
CMakeLists.txt
LICENSE
README.md
StratifyLocalSettings.json
StratifySettings.json
sl_settings.json

README.md

mbedLPC1768

For more information about licensing, see here: http://stratifylabs.co/download/

Support

If you have any questions, please create an issue on Github. I will answer them as soon as I can.

Getting Started

This is the board support package for the MBED LPC1768 board. Here is a quick guide to getting started:

Preview

  • Connect a mini-B USB cable to the MBED and drop the bootloader file (mbedLPC1768/build_release_usb_boot/mbedLPC1768.bin) in the MBED mounted drive then press the MBED reset button (you should see one of the 4 blue leds flash a few times whent the bootloader starts)
  • Now connect the LPC1768 USB port directly to your computer using the image below

Preview

  • Finally, use Stratify Link to program the OS as shown below

Preview

Once the bootloader and OS are installed, you can proceed to install and run applications (without going through the above process a second time).

Known Issues

Limited Semihost Features

The MBED semihost filesystem API (for accessing "/home") is limited. You can access the MBED filesystem using open(), read(), write(), close(), etc. However, the API does not provide any directory access, so you can't list all the files in the directory. A. It is particularly bad if you have the MBED USB connected and the drive mounted. If the drive is mounted, you will not be able to create files.

UART Transport Layer

At one time, you could run the Stratify Link transport layer over the UART using the standard USB connection. Changes to the MBED firmware have prevented this from working. The MBED resets the target whenever the virtual COM port is closed. This causes problems. So for now, you have to directly connect to the LPC1768 USB port. This works much faster and better than the UART anyway.

Changelog

v1.1: Updated UART transport close function to eliminate a build warning v1.0: Initial Stable release