Hackintosh ASUS TUF H370-Pro Gaming + Intel Core i7-8700 + Gigabyte AMD Radeon RX 580 4GB
EFI folder used on my ASUS TUF H370-Pro Gaming Vanilla Hackintosh build, running macOS Catalina 10.15.x
- Board: ASUS TUF H370-Pro Gaming
- CPU: Intel Core i7-8700 @ 3.2GHz
- GPU: Gigabyte AMD Radeon RX 580 4GB
- RAM: 32GB DDR4 @ 3000MHz Corsair
- SSD: NVMe PCIe M.2 Crucial 1TB
- SSD: SATA SSD Crucial 1TB
- Wifi/Bluetooth: Fenvi FV-T919 Broadcom BCM94360CD
Use the Hackintosh Vanilla Desktop Guide (Building the USB Installer) to prepare your USB Flashdrive to install macOS.
Then mount the USB Flashdrive's EFI partition (with Clover Configurator or EFI Mounter) and use the EFI folder in this repo instead of following the rest of the guide.
You will need to generate your own values in the config.plist for the following vars:
- RtVariables -> MLB
- SMBIOS -> BoardSerialNumber
- SMBIOS -> SerialNumber
- SMBIOS -> SmUUID
The folder Extras contains:
A copy of the motherboard settings exported from the same UEFI/BIOS configuration utility. You can use that file (CMO) to import the settings from an USB drive while in the UEFI/BIOS configuration, inside Tools (in Advanced Mode).
UEFI/BIOS version: 1502
It also contains a copy of the SSDT-UIAC-ALL.dsl used to compile the ACPI patch for Clover to enable all USB ports in without the need of patching everytime Apple releases an update. Many thanks to RehabMan and UtterDisbelief for the guides they put together.
Open Extras/SSDT-UIAC-ALL.dsl and see the comments to know what ports are enabled.
EFI USB Install
A zip file, EFI-20190522-USB-Install-Minimal.zip, with a minimal EFI folder, meant to be used in the USB flash drive to install macOS. Just the bare minimum for it to run the installer in this Hackintosh configuration. Mainly tested with Mojave. Should work with Catalina (updated to use Clover 5093).
If the main EFI folder in the repo doesn't let you finish the installation, you can try to use this one in the USB Flashdrive Installer. Not for use in the final installation disk.
First try the main EFI folder (repo's root) to install Calatina, as i did when transitioning to a Vanilla Hackintosh.
At my blog: It's about Attitude (Spanish only).
Reach me at Twitter or by e-mail: esteban (at) attitude.cl
- Updated to macOS Catalina 10.15.1 (19B88)
- Added a custom SSDT-UIAC-ALL.aml ACPI patch to enable all USB ports.
- macOS Mojave Vanilla Installation. Use this guide to prepare your USB Installer.
- Added UEFI/BIOS settings.
- Initial release for macOS Mojave 10.14.x