Skip to content
Branch: master
Find file History
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
..
Failed to load latest commit information.
SketchFiles
images
CanisterBase-86MM.stl
CanisterCover.stl
CenterRing.stl
DispenseGear.stl
MotorGear.stl
README.md

README.md

Assembly Instructions

For Part: PD-FBD-28BYJ-86MM


Bill Of Materials


  1. 3D Printed Parts

    • Canister Cover
    - Center Ring - Dispense Gear - Motor Gear - Canister Base
  2. Hardware

    • (3) #4 x 3/4" Machine Screws
    • (3) #4 Nuts
    • (3) #4 Flat Washers
    • (2) #6 or #8 x 3/4" Machine Screws
    • (2) #6 or #8 Nuts
    - 28BYJ-48 Step Motor - ULN2003 Step Motor Driver Board

Assembly


  1. Place the "Canister Cover" on Work bench (smooth side up)

    • Insert a #4 x 1/2" Bolt upwards through the center
    • Place a #4 flat washer on the bolt
    • Place the "Center Ring" on top of the "Canister Cover"

  2. Place the "Dispense Gear" inside the "Center Ring"

    • Place 2 - #4 Flat Washers on top

  3. Place Stepper Motor under the Canister Base (Motor meshes with the coarse side - Smooth surface up)

    • Attach the "Motor Gear" to the motor shaft (Smooth surface up)

  4. Flip the "Canister Base" with Motor and place on top of the "Center Ring"

    • Attach a #4 Flat Washer on top

  5. Fasten the motor to the despenser

    • Use #6 x 3/4" Machine Screws

You can’t perform that action at this time.