User Guide: Logging to internal flash

peabody124 edited this page Dec 30, 2014 · 1 revision
Clone this wiki locally

This feature is not available on all boards depending on resources and code support. Currently available for Colibri and Quanton (pending this PR

Instructions to use this

  • Enable the "Logging" module in ModuleSettings->AdminState
  • Default behavior is to start logging once the board is armed
  • Logs are "named" with increasing numbers and will overwrite previous ones when flash is filled
  • Download logs from Tools->Download Log
  • Select the Log ID you want to download and specify the log file name
  • Click save (and wait while that number increases until log is fully downloaded)