New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

TWRP 2.8.4.1-2.8.6.0 on Bacon doesn't decrypt /data #333

Closed
jfeise opened this Issue Jan 16, 2015 · 168 comments

Comments

Projects
None yet
@jfeise
Copy link

jfeise commented Jan 16, 2015

The CM12 nightly from 0116 supports full-device encryption of /data.
TWRP fails to decrypt that, saying 'wrong password'.

@skola28

This comment has been minimized.

Copy link

skola28 commented Jan 18, 2015

Also reporting this same issue. CM12 Nightly 1-16-2015, TWRP 2.8.4.1.
Using PIN unlock.
Additionally, before I even set a pin password TWRP wasn't decrypting using "default_password" that Lollipop supposedly uses.

@Dees-Troy

This comment has been minimized.

Copy link
Member

Dees-Troy commented Jan 18, 2015

The CM 12 nightly for 2015-01-16 supports some kind of hardware encryption methods that aren't present in AOSP. Fortunately CM 12 source is open. Unfortunately, the process for decrypting in hardware isn't all that well documented. I pushed a couple of changes to my OnePlus One device files here:
https://github.com/TeamWin/android_device_oneplus_bacon/tree/cm-11.0
The kernel I am using is here:
https://github.com/TeamWin/android_kernel_oneplus_msm8974/tree/cm-12.0

I created this patch set to add some hardware decrypt methods to TWRP's decryption here:
https://gerrit.omnirom.org/#/c/11542/

The process for using this at this point is somewhat manual. Build and boot TWRP using these repos and cherry pick the patch set. When prompted to decrypt, hit cancel. Go to the mount page and mount system and firmware. adb shell ln -sf /system/vendor /vendor and wait about 30 seconds then decrypt using the Decrypt button in the lower right. TWRP should report that it was decrypted successfully meaning that we've properly generated a decrypt key but for some reason the resulting dm-0 block device is not readable.

I'm not really sure where to take it from here. I repacked the boot image with some default.prop changes to enable full rooted debugging and got this log from a normal Android decrypt cycle:
D/Cryptfs ( 204): crypt_ftr->fs_size = 25920798
I/Cryptfs ( 204): Using scrypt with keymaster for cryptfs KDF
D/QSEECOMAPI: ( 204): QSEECom_get_handle sb_length = 0x2000
D/QSEECOMAPI: ( 204): App is already loaded QSEE and app id = 2
I/Cryptfs ( 204): Signing safely-padded object
D/QSEECOMAPI: ( 204): QSEECom_dealloc_memory
D/QSEECOMAPI: ( 204): QSEECom_shutdown_app, app_id = 2
D/ ( 204): HW based disk encryption is enabled
D/ ( 204): HW based disk encryption is enabled
D/ ( 204): Success loading QSEECom_create_key
D/ ( 204): Success loading QSEECom_update_key_user_info
D/ ( 204): Success loading QSEECom_wipe_key
I/MQClient( 656): unable to connect to [/data/misc/location/mq/location-mq-s]:[No such file or directory]
W/XTWiFiOS( 656): connection failure. count 6
D/Ulp_jni ( 656): JNI:In update_settings:currentContextType 0, currentGpsSetting 0, currentAgpsSetting 1,currentNetworkProvSetting 0,currentWifiSetting 0,currentBatteryCharging 0,currentEnhLocationServicesSetting 0 currentPipUserSetting 0
D/Ulp_jni ( 656): JNI:system_update. Event-4
E/QSEECOMAPI: ( 204): SUCESS::ioctl call to create encryption key for usage 1 success with ret = 0
D/ ( 204): HW based disk encryption is enabled
I/Cryptfs ( 204): load_crypto_mapping_table: target_type = req-crypt
I/Cryptfs ( 204): load_crypto_mapping_table: real_blk_name = /dev/block/platform/msm_sdcc.1/by-name/userdata, extra_params = fde_enabled
I/Cryptfs ( 204): Password matches
D/Cryptfs ( 204): test_mount_encrypted_fs(): Master key saved
D/QSEECOMAPI: ( 204): QSEECom_get_handle sb_length = 0x2000
D/QSEECOMAPI: ( 204): App is already loaded QSEE and app id = 2
I/Cryptfs ( 204): keymaster version is 3
D/QSEECOMAPI: ( 204): QSEECom_dealloc_memory
D/QSEECOMAPI: ( 204): QSEECom_shutdown_app, app_id = 2
E/VoldConnector( 656): NDC Command {10 cryptfs checkpw [scrubbed]} took too long (5946ms)

Hopefully someone with more time and fewer devices to maintain can take it a bit further and figure out what is still missing.

@jfeise

This comment has been minimized.

Copy link

jfeise commented Jan 19, 2015

Changing the encryption pwd fails even with cryptfs. That app is from the guy who wrote the book on Android security: http://www.nostarch.com/androidsecurity
http://nelenkov.blogspot.com/2012/08/changing-androids-disk-encryption.html
I hope he can provide some insights. His app works for my Nexus devices with CM12, just not for the OnePlus One.

@Dees-Troy

This comment has been minimized.

Copy link
Member

Dees-Troy commented Jan 23, 2015

I found that /system/bin/qseecomd is supposed to be running during the decrypt cycle. Running it before / during the decrypt cycle gives me a dmesg that's extremely similar to Android, but it still fails at the end. I added some extra logging to drivers/misc/qseecom.c in the kernel to try to help debug:
<3>[ 20.624936] QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -68,app_id = 0,lstr = 12288
<3>[ 20.625003] QSEECOM: __qseecom_generate_and_save_key: process_incomplete_cmd FAILED, resp.result -68
<3>[ 20.625040] QSEECOM: __qseecom_generate_and_save_key: disable clk CLK_QSEE and ret -22
<3>[ 20.625104] QSEECOM: __qseecom_disable_clk: __qseecom_disable_clk
<3>[ 20.625169] QSEECOM: qseecom_create_key: Failed to generate key on storage: -22
<3>[ 20.625205] QSEECOM: qseecom_ioctl: failed to create encryption key: -22

Unfotunately 2 of the big players during the decrypt cycle are the qseecomd and libQSEEComAPI.so which are both closed source proprietary pieces created by Qualcomm, so it makes it hard to debug and figure out what is wrong.

@JackalFrost

This comment has been minimized.

Copy link

JackalFrost commented Jan 24, 2015

I'm having this issue on TWRP 2.8.3 with Lollipop, used pattern, enabled encryption, why did I do this to myself?

@jfeise jfeise changed the title TWRP 2.8.4.1 on Bacon doesn't decrypt /data TWRP 2.8.4.1/2.8.5.1 on Bacon doesn't decrypt /data Feb 13, 2015

@jfeise

This comment has been minimized.

Copy link

jfeise commented Feb 13, 2015

No change with 2.8.5.1.

@abel408

This comment has been minimized.

Copy link

abel408 commented Feb 14, 2015

I am also on CM12 nightlies with TWRP 2.8.5.1. Cannot decrypt data from TWRP which makes the recovery pretty much useless.

@skola28

This comment has been minimized.

Copy link

skola28 commented Feb 15, 2015

Also reporting CM12 nightlies are not decrypting in TWRP 2.8.5.1.
It is possible to install new nightlies via sideload however.

@skola28

This comment has been minimized.

Copy link

skola28 commented Feb 16, 2015

Suggest changing the title to specifically call out Lollipop as to not confuse this with the Cyanogenmod 11, and other hardware platform KitKat encryption issues that got resolved by 2.8.X

@Rashed97

This comment has been minimized.

Copy link

Rashed97 commented Feb 18, 2015

@Dees-Troy Have you tried something like this: CyanogenMod/android_device_oppo_msm8974-common@a060186

That should let QSEECOM run no matter what. Just an idea ;)

@Rashed97

This comment has been minimized.

Copy link

Rashed97 commented Feb 22, 2015

I believe you can still use adb sideload.

On Sun, Feb 22, 2015 at 10:11 AM, infinitnet notifications@github.com
wrote:

I'm having the same problem with my M8 running Lollipop (ViperOneM8) and
TWRP 2.8.5.0. I encrypted the device after setup and now tried to flash an
OTA and discovered that I can't decrypt /data through TWRP (always says
wrong password), which makes it impossible to install the very much needed
update. Is there any fix for this in sight?


Reply to this email directly or view it on GitHub
#333 (comment)
.

Sincerely,

Rashed Abdel-Tawab

@infinitnet

This comment has been minimized.

Copy link

infinitnet commented Feb 22, 2015

Alright, it worked fine with adb sideload. However I needed the latest adb, which isn't available everywhere yet, so if anyone running Linux runs into the same issue (sideload error due to outdated adb), recent binaries can be taken from here: https://www.archlinux.org/packages/?name=android-tools

@aarmea

This comment has been minimized.

Copy link

aarmea commented Mar 6, 2015

I can't even seem to use the adb sideload workaround (disregarding the fact that it's a terrible idea to update without making a backup first). Instead, I get error: closed. Trying adb usb first doesn't help, either.

I'm running TWRP 2.8.5.1 with adb 1.0.31 on a Mac.

@jfeise

This comment has been minimized.

Copy link

jfeise commented Mar 7, 2015

I think that's a separate bug in 2.8.5.1. adb sideload works with 2.8.4.x. It may also have to do with your version of adb. 1.0.32 is the latest one.
In 2.8.5.1, you can use adb push <cm-version> /cache, for example, and then install in recovery from there. That's what I currently do.
But yes, not being able to do backups is a major issue.

@dbx4

This comment has been minimized.

Copy link

dbx4 commented Mar 16, 2015

Another good alternative for flashing nightlies without /data access is using usb-otg. Here's what I do:

  1. Copy ROM zip and Gapps zip onto USB stick.
  2. Delete /data/dalvik-cache manually using file browser or terminal
  3. Reboot into TWRP, wipe Cache partition
  4. Insert USB stick, mount usb-otg, install ROM and then Gapps
@joshmule

This comment has been minimized.

Copy link

joshmule commented Mar 16, 2015

I do something similar:

  1. Download ROM zip to USB
  2. Reboot to TWRP with OTG cable inserted
  3. Install ROM by selecting OTG storage and zipfile
  4. Select Wipe Dalvik and Cache after the install, then reboot

This works as a workaround until encryption is truly supported in TWRP

@Diapolo

This comment has been minimized.

Copy link

Diapolo commented Mar 17, 2015

I'm missing a comment I gave yesterday? Strange...

Using S4 i9506 (ks01lte) with TWRP 2.8.5.0 from here (http://forum.xda-developers.com/galaxy-s4/i9506-develop/recovery-twrp-2-8-1-0-touch-recovery-t2942159) and I'm also unable to decrypt my data partition. OS is official CM12 nightly (Android 5.0.2) and I also encrypted within that OS.

Is there any way I can help to track this issue down? I recently switched from CWM to TWRP in the hope I could use it with encrypted data :).

@theGrower

This comment has been minimized.

Copy link

theGrower commented Mar 17, 2015

How are people installing nightlies from /cache without decrypting /data? /data is where the updates are going. This fails for me every time. I have not tired and OTG, and I haven't update my ADB yet to try sideload again.

@arnottcr

This comment has been minimized.

Copy link

arnottcr commented Mar 17, 2015

I usually get some errors, but since the system is not encrypted, it will finish and update the system; assuming there are not systemic errors with the update that would also be seen with an unencrypted system

@jfeise

This comment has been minimized.

Copy link

jfeise commented Mar 17, 2015

You can install nightlies by sideloading them. Or copy them to /cache, then reboot into recovery and install from there.
The install script tries to mount /data, which fails, but it continues installing the nightly.
You can not do much else in recovery, in particular, you can not take backups of /data. That's really my main issue with the decryption failure.

@theGrower

This comment has been minimized.

Copy link

theGrower commented Mar 17, 2015

I’m realizing I’m having another very weird happening... When I’m booting up to CM12 I’m no longer asked for my encryption password. It has been like this since I first tried to decrypt in twrp after initial encryption. It just boots directly to the lock screen. Also, as far as installing from /cache is just not working. I’m not sure how anyone is getting this to work, so here is what I’m doing: First I moved the .zip into /cache using file manager; boot into recovery; click cancel at password (since it fails anyway); Click Install; move to /cache and choose .zip; swipe to Confirm flash. At this time TWRP temporarily shows the running script, then reboots back into recovery. If I’m doing something wrong, I’d love to be set straight!

@joshmule

This comment has been minimized.

Copy link

joshmule commented Mar 17, 2015

Yes, /data isn't needed at all for ROM upgrades. Put the zipfile on the USB stick and connect via OTG cable. Yes /data mount will fail, but unneeded for upgrade.

@ApolloLV

This comment has been minimized.

Copy link

ApolloLV commented Mar 20, 2015

I always update like this: Download the new nightly with the integrated CM update manager. run cp /storage/sdcard0/cmupdater/.zip /cache/nightly.zip in a root shell inside a terminal emulator, reboot into recovery, cancel decryption. Install zip from /cache (which is not encrypted), reboot into system.

@mjb2000

This comment has been minimized.

Copy link

mjb2000 commented Mar 21, 2015

These work around work fine for updating CM with an inaccessible /data - but does anyone know if there is a timeline or plan to get access to an encrypted /data within TWRP?

@Diapolo

This comment has been minimized.

Copy link

Diapolo commented Mar 21, 2015

@mjb2000 Yeah I'm also interested in a fix and a timeline, because TWRP just get's a perfect CWM replacement if accessing encrypted /data is working :).

@skola28

This comment has been minimized.

Copy link

skola28 commented Mar 21, 2015

The last I heard was TWRP will update when there is a stable rom version available.

@theGrower

This comment has been minimized.

Copy link

theGrower commented Mar 21, 2015

Cannot sideload. "error: insufficient permissions for device"
Cannot install from /cache so please stop repeating yourselves. Perhaps you can, and congratulations on your success. All that happens when I try is TWRP reboots itself.

Even weirder - I'm still not getting prompted to put in my encryption password at boot up which is quite concerning. TWRP pretty much fails at everything right now. Cannot decrypt, cannot mount anything.

Probably going to need to format everything and start anew. If TWRP and CM12 nightlies are not going to be basically functional, I guess it is back to stock CM11s ROM. To which I say, BOOOOOOOO!!

EDIT/UPDATE After some investigation and re-installing ADB and fastboot a few times on my linux box, I was able to sideload the newest nightly, or so it seemed. It appeared to work, but when rebooting into CM12 and checking the version it was showing the old nightly version. So I attempted again to install from /cache and again it appeared to work. Check the version and it indeed did update. I don't understand why it worked this time, but I'm not arguing with it.
However, still remained absolutely perplexed as to why I am no longer prompted for my decryption password at boot. It acts as if it is not encrypted; however, TWRP still cannot decrypt.

@ashish2sharma

This comment has been minimized.

Copy link

ashish2sharma commented Mar 24, 2015

@theGrower You can check by changing the lock type from settings.. It will show option to ask for password on boot or not to ask. You might have selected the other option.

@gavronehud

This comment has been minimized.

Copy link

gavronehud commented May 18, 2015

Ah, I was unaware. Thank you! Apparently the CM12.1 nightlies have ro.build.display.id
set to say bacon-userdebug.

Thanks again :)

E

On 05/18/2015 09:04 AM, Ethan Yonker wrote:

@gavronehud https://github.com/gavronehud the automatic backup name is pulled from /system/build.prop. The TWRP build is actually
bacon-eng instead of bacon-userdebug so this issue is coming from the ROM that you have installed or perhaps a build.prop edit that
you made.


Reply to this email directly or view it on GitHub
#333 (comment).

@xcellardoor

This comment has been minimized.

Copy link

xcellardoor commented May 18, 2015

Hi @Dees-Troy - As requested I have tried the latest and it runs great.

Many many many thanks for this. You're a reminder that Open-Source and the community is always the way to go.

@jfeise

This comment has been minimized.

Copy link

jfeise commented May 18, 2015

@gavronehud userdebug is the default for non-production builds. All CM builds are userdebug, except the production builds (e.g., CM11s, COS 12 for OPO.) Production builds are signed with the official device manufacturer key, eng and userdebug are signed with test keys available in AOSP.
https://source.android.com/source/building-running.html
user limited access; suited for production
userdebug like "user" but with root access and debuggability; preferred for debugging
eng development configuration with additional debugging tools

@RichardEb

This comment has been minimized.

Copy link

RichardEb commented May 19, 2015

When is the version available for other devices. e.g. the HTC M8 (google play edition Android 5.1(clean))

@RichardEb

This comment has been minimized.

Copy link

RichardEb commented May 19, 2015

#384 Was closed with the reason "Duplicate of #333". So this should work for all HTC?(or at least google play edition)

@theGrower

This comment has been minimized.

Copy link

theGrower commented May 19, 2015

@RichardEb This is for OnePlus One (Bacon) device only. HTC does not use the same encryptions. Use the search function and read through the posts.

@RichardEb

This comment has been minimized.

Copy link

RichardEb commented May 19, 2015

1.) I'm talking not not about the HTC Android version. I'm talking about the google play edition. This is a clean android that was NOT modified by HTC. It`s the same version that runs on a Nexus

2.) I used the search function and found #384 That describes my problem. But this issue was CLOSED because an admin says it's a DUPLICATE of THIS ISSUE

@theGrower

This comment has been minimized.

Copy link

theGrower commented May 19, 2015

@RichardEb Did you notice in the title that this is for BACON? OnePlus One, AKA Bacon? The issue here is specific to the OnePlus One.
Now, if you are having a similar problem on the google play edition of the HTC M8 and the Nexus 6, then make another thread and let the admin sort it out. This certainly is not the correct thread. The work discussed in this thread addressed the OPO's hardware specifically. If you read through all the posts you'll see where others have asked and this has been explained nearly ad nauseam. I believe the HTC M8 is a separate issue, unrelated to the OPO issue.

@RichardEb

This comment has been minimized.

Copy link

RichardEb commented May 19, 2015

#384 Was closed

@jfeise

This comment has been minimized.

Copy link

jfeise commented May 19, 2015

@RichardEb Please stop spamming this thread!

@RichardEb

This comment has been minimized.

Copy link

RichardEb commented May 19, 2015

yes if you start reading my post. A Team Win admin closed my bug report and forced me to ask in this thread. Know you say I should start a third issue because Im not allowed to post here and I'm not allowed to post in my original issue #384

@skola28

This comment has been minimized.

Copy link

skola28 commented May 19, 2015

@RichardEb, mistakes happen. When encryption started moving to the hardware side, many admins were probably not aware of it to the level that @Dees-Troy is.

I see you already asked to reopen the other thread, that is the correct option. It may be useful to post more information about WHY it is an HTC issue rather than just pointing back at #333.

@jfeise

This comment has been minimized.

Copy link

jfeise commented May 19, 2015

First off, that wasn't your issue. Somebody else had created that bug report. It also wasn't for the M8, it was for the M7. You only posted a comment there that referenced the M8, so your post there was already off-topic.
Second, even if it is closed it doesn't mean that you can spam other threads! You got an answer here and then you started to spam!
Geez. Please use common sense!

@lobotomm

This comment has been minimized.

Copy link

lobotomm commented May 25, 2015

2.8.6.1. works fine! (oxygen os, encrypted).
Donating :-)

@ciaby

This comment has been minimized.

Copy link

ciaby commented Jun 16, 2015

Just flashed TWRP 2.8.6.1, I'm running CM12S-YNG1TAS17L, encrypted.
The decryption part seems to work, but it's unable to mount /data.
I already tried with a short PIN (4-char), long PIN (8-char), and a long password.
They all decrypt succesfully, but none of them mounts /data.
Any clue about this? :)

I have dmesg and recovery.log

DMESG:

<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 3.4.67-cyanogenmod-gaff3758 (jenkins@build) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Mon May 18 09:34:30 EDT 2015
<4>[    0.000000] CPU: ARMv7 Processor [512f06f1] revision 1 (ARMv7), cr=10c5387d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[    0.000000] Machine: Qualcomm MSM 8974 (Flattened Device Tree), model: Qualcomm MSM 8974Pro-AC One+ A0001
<6>[    0.000000] Initialized persistent memory from 50000000-500fffff
<6>[    0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-5000000
<6>[    0.000000] cma: Found secure_region, memory base 0x00000000, size 252 MiB, limit 0xffffffff
<6>[    0.000000] cma: Found adsp_region, memory base 0x00000000, size 63 MiB, limit 0xffffffff
<6>[    0.000000] cma: Found qsecom_region, memory base 0x00000000, size 17 MiB, limit 0xffffffff
<6>[    0.000000] cma: Found audio_region, memory base 0x00000000, size 12 MiB, limit 0xffffffff
<6>[    0.000000] cma: Found external_image_region@fa00000, memory base 0x0fa00000, size 5 MiB, limit 0xffffffff
<6>[    0.000000] cma: Found peripheral_region@5a00000, memory base 0x05a00000, size 33 MiB, limit 0xffffffff
<6>[    0.000000] cma: Found tz_apps@0x7b00000, memory base 0x07b00000, size 5 MiB, limit 0xffffffff
<6>[    0.000000] cma: Found modem_region@0x8000000, memory base 0x08000000, size 82 MiB, limit 0xffffffff
<6>[    0.000000] cma: Found oem_data_region@5900000, memory base 0x05900000, size 1 MiB, limit 0xffffffff
<6>[    0.000000] cma: CMA: reserved 252 MiB at 0xb0400000 for secure_mem
<6>[    0.000000] cma: CMA: reserved 64 MiB at 0xac400000 for adsp_mem
<6>[    0.000000] cma: CMA: reserved 20 MiB at 0xab000000 for qseecom_mem
<6>[    0.000000] cma: CMA: reserved 16 MiB at 0xaa000000 for audio_mem
<6>[    0.000000] cma: CMA: reserved 5 MiB at 0x0fa00000 for (null)
<6>[    0.000000] cma: CMA: reserved 33 MiB at 0x05a00000 for peripheral_mem
<6>[    0.000000] cma: CMA: reserved 5 MiB at 0x07b00000 for tz_apps
<6>[    0.000000] cma: CMA: reserved 82 MiB at 0x08000000 for modem_mem
<6>[    0.000000] cma: CMA: reserved 1 MiB at 0x05900000 for oem_data
<6>[    0.000000] cma: CMA: reserved 16 MiB at 0x2e800000 for default region
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<6>[    0.000000] IMEM DT static mapping successful
<7>[    0.000000] On node 0 totalpages: 754176
<7>[    0.000000] free_area_init_node: node 0, pgdat c12e2180, node_mem_map cd200000
<7>[    0.000000]   Normal zone: 1520 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 160784 pages, LIFO batch:31
<7>[    0.000000]   HighMem zone: 4624 pages used for memmap
<7>[    0.000000]   HighMem zone: 587248 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @cea5c000 s16064 r0 d12608 u32768
<7>[    0.000000] pcpu-alloc: s16064 r0 d12608 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 748032
<5>[    0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=bacon user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.bootdevice=msm_sdcc.1 androidboot.selinux=permissive androidboot.emmc=true androidboot.serialno=48e96753 gpt androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_jdi_1080p_cmd oppo.pcb_version=12 ddr_manufacture_info=Samsung  ddr_row0_info=14 LCD_id<4 oppo.rf_version=99 maxcpus=4 androidboot.startupmode=charger androidboot.mode=recovery oppo_ftm_mode=ftmrecovery lk_version=V1.0
<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Memory: 89MB 40MB 2817MB = 2946MB total
<5>[    0.000000] Memory: 2556740k/2556740k available, 588988k reserved, 2006016K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000]      vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
<5>[    0.000000]       lowmem : 0xc0000000 - 0xef800000   ( 760 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]       .text : 0xc0008000 - 0xc107be14   (16848 kB)
<5>[    0.000000]       .init : 0xc1100000 - 0xc1215ec0   (1112 kB)
<5>[    0.000000]       .data : 0xc1216000 - 0xc131b338   (1045 kB)
<5>[    0.000000]        .bss : 0xc131b35c - 0xc1506f2c   (1967 kB)
<6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000]   RCU dyntick-idle grace-period acceleration is enabled.
<6>[    0.000000]   Dump stacks of tasks blocking RCU-preempt GP.
<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[    0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
<6>[    0.000000] Switching to timer-based delay loop
<6>[    0.000000] kmemleak: Kernel memory leak detector disabled
<6>[    0.000053] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
<6>[    0.000068] pid_max: default: 32768 minimum: 301
<6>[    0.000189] Security Framework initialized
<6>[    0.000217] SELinux:  Initializing.
<7>[    0.000249] SELinux:  Starting in permissive mode
<6>[    0.000297] Mount-cache hash table entries: 512
<6>[    0.000942] Initializing cgroup subsys debug
<6>[    0.000952] Initializing cgroup subsys cpuacct
<6>[    0.000960] Initializing cgroup subsys freezer
<6>[    0.000992] CPU: Testing write buffer coherency: ok
<6>[    0.001150] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[    0.001204] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
<6>[    0.003886] Setting up static identity map for 0xb879e8 - 0xb87a70
<6>[    0.003902] MSM Memory Dump table set up
<6>[    0.005189] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[    0.005853] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
<6>[    0.006469] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
<6>[    0.006530] Brought up 4 CPUs
<6>[    0.006541] SMP: Total of 4 processors activated (153.60 BogoMIPS).
<6>[    0.016653] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 1
<6>[    0.016982] dummy: 
<6>[    0.028835] NET: Registered protocol family 16
<6>[    0.031177] DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>[    0.032906] KPI: Bootloader start count = 6371763
<6>[    0.032914] KPI: Bootloader end count = 539122634
<6>[    0.032921] KPI: Bootloader display count = 1622753386
<6>[    0.032928] KPI: Bootloader load kernel count = 2358234472
<6>[    0.032936] KPI: Kernel MPM timestamp = 156079
<6>[    0.032942] KPI: Kernel MPM Clock frequency = 32768
<6>[    0.032957] socinfo_print: v9, id=194, ver=1.1, raw_id=1972, raw_ver=1 ,hw_plat=8, hw_plat_ver=65536
<6>[    0.032961]  accessory_chip=0,hw_plat_subtype=0, pmic_model=65537, pmic_die_revision=196609,foundry_id=1
<3>[    0.033192] msm_8974_init_gpiomux:1479 socinfo_get_version 10001
<6>[    0.046353] gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
<6>[    0.063295] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
<6>[    0.081576] 8841_s1: 675 <--> 1050 mV at 0 mV normal idle 
<6>[    0.081946] 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle 
<6>[    0.082295] 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle 
<6>[    0.082676] 8841_s2: 500 <--> 1050 mV at 0 mV normal idle 
<6>[    0.083028] 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle 
<6>[    0.083384] 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
<6>[    0.083742] 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle 
<6>[    0.084116] 8841_s3: 1050 mV normal idle 
<6>[    0.084494] 8841_s4: 815 <--> 900 mV at 0 mV normal idle 
<6>[    0.084859] 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle 
<6>[    0.085207] 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle 
<6>[    0.085564] 8941_s1: 1300 mV normal idle 
<6>[    0.085934] 8941_s2: 2150 mV normal idle 
<6>[    0.086301] 8941_s3: 1800 mV normal idle 
<6>[    0.086669] 8941_l1: 1225 mV normal idle 
<6>[    0.087049] 8941_l2: 1200 mV normal idle 
<6>[    0.087413] 8941_l3: 1000 <--> 1225 mV at 1000 mV normal idle 
<6>[    0.087799] 8941_l4: 1225 mV normal idle 
<6>[    0.088161] 8941_l5: 1800 mV normal idle 
<6>[    0.088541] 8941_l6: 1800 mV normal idle 
<6>[    0.088897] 8941_l7: 1800 mV normal idle 
<6>[    0.089271] 8941_l8: 1800 mV normal idle 
<6>[    0.089655] 8941_l9: 1800 <--> 2950 mV at 2950 mV normal idle 
<6>[    0.090028] 8941_l10: 1800 <--> 2950 mV at 2950 mV normal idle 
<6>[    0.090408] 8941_l11: 1225 <--> 1350 mV at 1300 mV normal idle 
<6>[    0.090777] 8941_l12: 1800 mV normal idle 
<6>[    0.091128] 8941_l12_ao: 1800 mV normal idle 
<6>[    0.091536] 8941_l13: 1800 <--> 2950 mV at 2950 mV normal idle 
<6>[    0.091911] 8941_l14: 1800 mV normal idle 
<6>[    0.092295] 8941_l15: 2050 mV normal idle 
<6>[    0.092671] 8941_l16: 2700 mV normal idle 
<6>[    0.093049] 8941_l17: 2700 <--> 2850 mV at 2700 mV normal idle 
<6>[    0.093424] 8941_l18: 2850 mV normal idle 
<6>[    0.093813] 8941_l19: 2900 <--> 3350 mV at 2900 mV normal idle 
<6>[    0.094189] 8941_l20: 2950 mV normal idle 
<6>[    0.094577] 8941_l21: 2950 mV normal idle 
<6>[    0.094957] 8941_l22: 3000 mV normal idle 
<6>[    0.095353] 8941_l23: 2800 <--> 3000 mV at 2800 mV normal idle 
<6>[    0.095733] 8941_l24: 3075 mV normal idle 
<6>[    0.096089] 8941_lvs1: 
<6>[    0.096422] 8941_lvs2: 
<6>[    0.096740] 8941_lvs3: 
<6>[    0.098789] PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 2/4
<6>[    0.098799] PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 2/4
<6>[    0.099064] krait0: 500 <--> 1120 mV at 900 mV fast normal idle 
<6>[    0.099475] krait1: 500 <--> 1120 mV at 900 mV fast normal idle 
<6>[    0.099873] krait2: 500 <--> 1120 mV at 900 mV fast normal idle 
<6>[    0.100267] krait3: 500 <--> 1120 mV at 900 mV fast normal idle 
<6>[    0.128860] msm-thermal qcom,msm-thermal.70: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
<6>[    0.129650] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
<6>[    0.129665] msm-thermal qcom,msm-thermal.70: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qti,pmic-opt-curr-temp. KTM continues
<6>[    0.129681] msm-thermal qcom,msm-thermal.70: probe_thermal_efuse_read:Failed reading node=/soc/qcom,msm-thermal, key=qcom,efuse-data. KTM continues
<3>[    0.129831] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<6>[    0.130246] persistent_ram: found existing buffer, size 89385, start 89385
<6>[    0.307660] console [ram-1] enabled
<4>[    0.307762] 8941_l18: Failed to create debugfs directory
<6>[    0.308086] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[    0.308222] hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[    0.309861] clock-krait-8974 f9016000.qcom,clock-krait: PVS config version: 1
<6>[    0.309949] clock-krait-8974 f9016000.qcom,clock-krait: Speed bin: 3
<6>[    0.310088] clock-krait-8974 f9016000.qcom,clock-krait: PVS bin: 7
<6>[    0.310163] clock-krait-8974 f9016000.qcom,clock-krait: PVS version: 1
<6>[    0.313036] L2 @ 729600 KHz
<6>[    0.313264] CPU0 @ 960000 KHz
<6>[    0.313339] CPU1 @ unknown rate. Forcing new rate.
<6>[    0.313562] CPU1 @ 300000 KHz
<6>[    0.313637] CPU2 @ unknown rate. Forcing new rate.
<6>[    0.313856] CPU2 @ 300000 KHz
<6>[    0.313932] CPU3 @ unknown rate. Forcing new rate.
<6>[    0.314089] CPU3 @ 300000 KHz
<6>[    0.319282] 8941_boost: 4500 mV 
<6>[    0.320549] 8941_mvs1: 
<3>[    0.320847] qcom,qpnp-regulator qpnp-regulator-ee12d400: Failed to find supply parent
<6>[    0.321458] spmi qpnp-regulator-ee12d400: Driver qcom,qpnp-regulator requests probe deferral
<6>[    0.322166] 8941_mvs2: 
<6>[    0.322593] 8941_mvs2: supplied by 8941_boost
<6>[    0.329493] sps:BAM 0xf9984000 (va:0xc5c60000) enabled: ver:0x6, number of pipes:20
<6>[    0.329863] sps:BAM 0xf9984000 is registered.
<6>[    0.330076] sps:sps is ready.
<6>[    0.335630] gdsc_venus: 
<6>[    0.336755] gdsc_mdss: 
<6>[    0.337602] gdsc_jpeg: 
<6>[    0.338486] gdsc_vfe: 
<6>[    0.339267] gdsc_oxili_gx: 
<6>[    0.339569] gdsc_oxili_gx: supplied by 8841_s4_corner
<6>[    0.340544] gdsc_oxili_cx: 
<6>[    0.341270] gdsc_usb_hsic: 
<3>[    0.342675] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
<6>[    0.355172] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c5e00000
<6>[    0.357372] Physical OCMEM zone layout:
<6>[    0.357581]  zone graphics    : 0xfec00000 - 0xfecfffff (1024 KB)
<6>[    0.357792]  zone lp_audio    : 0xfed00000 - 0xfed7ffff ( 512 KB)
<6>[    0.358158]  zone video   : 0xfed00000 - 0xfed7ffff ( 512 KB)
<6>[    0.372075] bio: create slab <bio-0> at 0
<6>[    0.372658] platform spi_eth_phy_vreg.80: Driver reg-fixed-voltage requests probe deferral
<6>[    0.373128] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
<3>[    0.373248] ION-heap mm: Cannot specify alignment for this type of heap
<6>[    0.373366] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
<3>[    0.373451] ION-heap adsp: Cannot specify alignment for this type of heap
<6>[    0.373562] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
<6>[    0.373684] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
<6>[    0.373839] cma: Assigned CMA region at 5a00000 to 17.qcom,ion-heap device
<6>[    0.373998] cma: Assigned CMA region at 8000000 to 1a.qcom,ion-heap device
<6>[    0.374151] ION heap system created
<6>[    0.374271] ION heap kmalloc created
<6>[    0.374359] ION heap mm created at 0xb0400000 with size fc00000
<6>[    0.374410] ION heap adsp created at 0xac400000 with size 3f00000
<6>[    0.374493] ION heap qsecom created at 0xab000000 with size 1100000
<6>[    0.374544] ION heap audio created at 0xaa000000 with size c04000
<6>[    0.374627] ION heap pil_1 created at 0x05a00000 with size 2100000
<6>[    0.374678] ION heap pil_2 created at 0x08000000 with size 5200000
<5>[    0.375552] SCSI subsystem initialized
<6>[    0.375665] usbcore: registered new interface driver usbfs
<6>[    0.375767] usbcore: registered new interface driver hub
<6>[    0.375886] usbcore: registered new device driver usb
<6>[    0.376206] Linux media interface: v0.10
<6>[    0.376267] Linux video capture interface: v2.00
<6>[    0.378085] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c5d00000, with 3 ctx banks
<6>[    0.378115] msm_thermal:do_freq_control Limiting CPU0 max frequency to 1958400. Temp:65
<6>[    0.378182] msm_thermal:do_freq_control Limiting CPU1 max frequency to 1958400. Temp:65
<6>[    0.378237] msm_thermal:do_freq_control Limiting CPU2 max frequency to 1958400. Temp:65
<6>[    0.378291] msm_thermal:do_freq_control Limiting CPU3 max frequency to 1958400. Temp:65
<6>[    0.379471] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c5d20000, with 3 ctx banks
<6>[    0.380959] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c5d40000, with 5 ctx banks
<6>[    0.381971] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c5d60000, with 3 ctx banks
<6>[    0.382935] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c5d80000, with 3 ctx banks
<6>[    0.383991] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
<6>[    0.384168] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
<6>[    0.384349] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
<6>[    0.384496] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
<6>[    0.384680] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
<6>[    0.384860] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
<6>[    0.385011] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
<6>[    0.385196] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
<6>[    0.385373] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
<6>[    0.385553] msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
<6>[    0.385715] msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
<6>[    0.385909] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
<6>[    0.386085] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
<6>[    0.386224] msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
<6>[    0.386407] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
<6>[    0.386583] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
<6>[    0.386722] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
<6>[    0.388543] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[    0.388926] Bluetooth: Core ver 2.16
<6>[    0.388999] NET: Registered protocol family 31
<6>[    0.389046] Bluetooth: HCI device and connection manager initialized
<6>[    0.389130] Bluetooth: HCI socket layer initialized
<6>[    0.389177] Bluetooth: L2CAP socket layer initialized
<6>[    0.389412] Bluetooth: SCO socket layer initialized
<6>[    0.389625] cfg80211: Calling CRDA to update world regulatory domain
<6>[    0.389724] cfg80211: World regulatory domain updated:
<6>[    0.389771] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[    0.389856] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[    0.389940] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[    0.389987] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[    0.390070] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
<6>[    0.390153] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
<6>[    0.390200] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
<6>[    0.390282] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
<6>[    0.390365] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
<6>[    0.390539] nfc: nfc_init: NFC Core ver 0.1
<6>[    0.390650] NET: Registered protocol family 39
<6>[    0.391244] Switching to clocksource arch_sys_counter
<6>[    0.408978] NET: Registered protocol family 2
<6>[    0.409184] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.409730] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[    0.411191] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>[    0.412168] TCP: Hash tables configured (established 131072 bind 65536)
<6>[    0.412219] TCP: reno registered
<6>[    0.412306] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.412396] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.412725] NET: Registered protocol family 1
<6>[    0.413031] Trying to unpack rootfs image as initramfs...
<6>[    0.559422] Freeing initrd memory: 4720K
<6>[    0.563221] Detected 9 counters on the L2CC PMU.
<7>[    0.564486] gpiochip_find_base: found new base at 992
<6>[    0.564544] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
<7>[    0.564900] gpiochip_find_base: found new base at 960
<6>[    0.564949] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
<7>[    0.565053] gpiochip_find_base: found new base at 928
<6>[    0.565104] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
<7>[    0.565418] gpiochip_find_base: found new base at 896
<6>[    0.565465] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
<7>[    0.565569] gpiochip_find_base: found new base at 864
<6>[    0.565619] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
<7>[    0.565941] gpiochip_find_base: found new base at 832
<6>[    0.565988] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
<7>[    0.566120] gpiochip_find_base: found new base at 800
<6>[    0.566174] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
<7>[    0.566537] gpiochip_find_base: found new base at 768
<6>[    0.566588] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
<7>[    0.566656] gpiochip_find_base: found new base at 736
<6>[    0.566706] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
<7>[    0.567080] gpiochip_find_base: found new base at 704
<6>[    0.567128] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
<7>[    0.567213] gpiochip_find_base: found new base at 672
<6>[    0.567260] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
<7>[    0.567646] gpiochip_find_base: found new base at 640
<6>[    0.567694] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
<7>[    0.567798] gpiochip_find_base: found new base at 608
<6>[    0.567845] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
<7>[    0.568194] gpiochip_find_base: found new base at 576
<6>[    0.568246] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
<7>[    0.568375] gpiochip_find_base: found new base at 544
<6>[    0.568423] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
<7>[    0.568780] gpiochip_find_base: found new base at 512
<6>[    0.568833] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
<7>[    0.568939] gpiochip_find_base: found new base at 480
<6>[    0.568986] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
<7>[    0.569386] gpiochip_find_base: found new base at 448
<6>[    0.569439] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
<6>[    0.570923] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
<6>[    0.573815] pil_pronto fb21b000.qcom,pronto: using secure boot
<6>[    0.575176] pil_venus fdce0000.qcom,venus: using secure boot
<6>[    0.581121] NET: Registered protocol family 27
<5>[    0.587222] msm_rpm_log_probe: OK
<6>[    0.596476] mpm_counter: [    0.596468]:(174543)
<6>[    0.597350] audit: initializing netlink socket (disabled)
<5>[    0.597446] type=2000 audit(0.580:1): initialized
<4>[    0.598554] highmem bounce pool size: 64 pages
<6>[    0.602040] fuse init (API version 7.18)
<6>[    0.602305] msgmni has been set to 1116
<7>[    0.602416] SELinux:  Registering netfilter hooks
<6>[    0.604632] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
<6>[    0.604683] io scheduler noop registered (default)
<6>[    0.604768] io scheduler deadline registered
<6>[    0.604822] io scheduler row registered
<6>[    0.604975] io scheduler cfq registered
<6>[    0.605025] io scheduler test-iosched registered
<7>[    0.605198] gpiochip_find_base: found new base at 444
<6>[    0.605254] gpiochip_add: registered GPIOs 444 to 447 on device: pm8841-mpp
<7>[    0.605547] qcom,qpnp-pin qpnp-pin-ee12ac00: qpnp_pin_probe: gpio_chip registered between 444-447
<7>[    0.606277] gpiochip_find_base: found new base at 408
<6>[    0.606331] gpiochip_add: registered GPIOs 408 to 443 on device: pm8941-gpio
<7>[    0.607494] qcom,qpnp-pin qpnp-pin-ee12c600: qpnp_pin_probe: gpio_chip registered between 408-443
<7>[    0.609655] gpiochip_find_base: found new base at 401
<6>[    0.609709] gpiochip_add: registered GPIOs 401 to 407 on device: pm8941-mpp
<7>[    0.610114] qcom,qpnp-pin qpnp-pin-ee12c800: qpnp_pin_probe: gpio_chip registered between 401-407
<4>[    0.612202] lm3630_chip_init: bl_initvalue=80
<4>[    0.612288] lm3630_chip_init: bl_initvalue=80,222
<4>[    0.612790] lm3630_probe:yanghai client irq =0
<4>[    0.612837] lm3630_probe:yanghai----
<3>[    0.612921] lm3630_bl 2-0036: LM3630 backlight register OK.
<6>[    0.613458] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc5dc0000
<6>[    0.613562] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc5d96000
<3>[    0.613725] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-clk-levels : spec error in device tree
<6>[    0.615710] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
<6>[    0.615842] mdss_dsi_panel_init: Panel Name = jdi 1080p cmd mode dsi panel
<6>[    0.616115] mdss_dsi_parse_panel_features: partial_update_enabled=0
<6>[    0.616203] mdss_dsi_parse_panel_features: ulps feature enabled
<6>[    0.616288] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
<6>[    0.616379] mdss_dsi_panel_init: Continuous splash enabled
<3>[    0.616861] dsi_panel_device_register:1676, lcd 5v en gpio not specified
<6>[    0.616999] mdss_dsi_retrieve_ctrl_resources: ctrl_base=c5d98800 ctrl_size=1f8 phy_base=c5d9ab00 phy_size=2b0
<6>[    0.631441] msm_thermal:do_freq_control Limiting CPU0 max frequency to 1574400. Temp:72
<6>[    0.631614] msm_thermal:do_freq_control Limiting CPU1 max frequency to 1574400. Temp:72
<6>[    0.631766] msm_thermal:do_freq_control Limiting CPU2 max frequency to 1574400. Temp:72
<6>[    0.631875] msm_thermal:do_freq_control Limiting CPU3 max frequency to 1574400. Temp:72
<6>[    0.671743] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
<6>[    0.672101] mdss_hw_init: MDP Rev=10020001
<6>[    0.673475] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
<3>[    0.673608] controller config is not present
<3>[    0.673663] mdss_dsi_pref_prim_panel:can't find panel phandle
<3>[    0.673716] mdss_dsi_ctrl_probe: can't find panel node 0:qcom,mdss_dsi_jdi_1080p_cmd
<4>[    0.673822] mdss_dsi_ctrl: probe of fd922e00.qcom,mdss_dsi failed with error 29
<6>[    0.675150] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.5
<6>[    0.676218] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
<7>[    0.676465] Registered led device: lcd-backlight
<6>[    0.676588] mdss_fb_register: FrameBuffer[1] 1920x1080 registered successfully!
<3>[    0.677564] sps: BAM device 0xf9944000 is not registered yet.
<6>[    0.677624] sps:BAM 0xf9944000 is registered.
<6>[    0.680273] f995d000.uart: ttyHS0 at MMIO 0xf995d000 (irq = 145) is a MSM HS UART
<4>[    0.684463] kgsl bus ib [0] = 2456000000
<4>[    0.684563] kgsl bus ib [1] = 3680000000
<4>[    0.684616] kgsl bus ib [2] = 4912000000
<4>[    0.684669] kgsl bus ib [3] = 7464000000
<4>[    0.684765] kgsl bus index is 3 for pwrlevel 0
<4>[    0.684817] kgsl bus index is 2 for pwrlevel 1
<4>[    0.684869] kgsl bus index is 2 for pwrlevel 2
<4>[    0.684962] kgsl bus index is 1 for pwrlevel 3
<4>[    0.685014] kgsl bus index is 0 for pwrlevel 4
<6>[    0.685895] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
<6>[    0.691952] brd: module loaded
<6>[    0.693867] loop: module loaded
<4>[    0.700564] QSEECOM: qseecom_probe: support_bus_scaling=0x1
<4>[    0.700623] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
<4>[    0.700769] QSEECOM: qseecom_probe: file-encrypt-pipe-pair=0x0
<4>[    0.700870] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
<4>[    0.701014] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
<4>[    0.701149] QSEECOM: qseecom_probe: secure app region addr=0x7b00000 size=0x500000
<6>[    0.702214] yanghai shineld driver init
<3>[    0.702344] SN3193_power:yuyi for SN3193_SDB gpio---
<6>[    0.811399] SN3193_probe:sn3193 probe
<7>[    0.811553] Registered led device: red
<7>[    0.811605] Registered led device: green
<7>[    0.811654] Registered led device: blue
<4>[    0.812651] i2c-core: driver [tabla-i2c-core] using legacy suspend method
<4>[    0.812750] i2c-core: driver [tabla-i2c-core] using legacy resume method
<4>[    0.812877] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
<4>[    0.812974] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
<6>[    0.813052] Loading pn544 driver
<4>[    0.813187] yuyi,clk_prepare_enable,return ret = 0
<6>[    0.813304] pn544_probe : requesting IRQ 345
<6>[    0.831746] SCSI Media Changer driver v0.25 
<6>[    0.832504] sps:BAM 0xf9944000 (va:0xc5da0000) enabled: ver:0x13, number of pipes:24
<4>[    0.836635] spi_qsd f9965000.spi: using default bus_num -1
<6>[    0.841010] tun: Universal TUN/TAP device driver, 1.6
<6>[    0.841108] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[    0.841233] rmnet_init: BAM devices[9]
<6>[    0.845473] PPP generic driver version 2.4.2
<6>[    0.845641] PPP BSD Compression module registered
<6>[    0.845695] PPP Deflate Compression module registered
<6>[    0.846076] PPP MPPE Compression module registered
<6>[    0.846133] NET: Registered protocol family 24
<6>[    0.846207] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>[    0.846304] CSLIP: code copyright 1989 Regents of the University of California.
<6>[    0.846701] wcnss_wlan probed in built-in mode
<6>[    0.847612] usbcore: registered new interface driver asix
<6>[    0.847730] usbcore: registered new interface driver cdc_ether
<6>[    0.847804] usbcore: registered new interface driver net1080
<6>[    0.847921] usbcore: registered new interface driver cdc_subset
<6>[    0.847994] usbcore: registered new interface driver zaurus
<6>[    0.848212] usbcore: registered new interface driver cdc_ncm
<6>[    0.881447] msm_thermal:do_freq_control Limiting CPU0 max frequency to 1267200. Temp:72
<6>[    0.881636] msm_thermal:do_freq_control Limiting CPU1 max frequency to 1267200. Temp:72
<6>[    0.881807] msm_thermal:do_freq_control Limiting CPU2 max frequency to 1267200. Temp:72
<6>[    0.881927] msm_thermal:do_freq_control Limiting CPU3 max frequency to 1267200. Temp:72
<6>[    1.108321] usbcore: registered new interface driver cdc_acm
<6>[    1.108434] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    1.108496] Initializing USB Mass Storage driver...
<6>[    1.108630] usbcore: registered new interface driver usb-storage
<6>[    1.108692] USB Mass Storage support registered.
<6>[    1.108822] usbcore: registered new interface driver ums-alauda
<6>[    1.108904] usbcore: registered new interface driver ums-cypress
<6>[    1.109034] usbcore: registered new interface driver ums-datafab
<6>[    1.109115] usbcore: registered new interface driver ums_eneub6250
<6>[    1.109246] usbcore: registered new interface driver ums-freecom
<6>[    1.109327] usbcore: registered new interface driver ums-isd200
<6>[    1.109460] usbcore: registered new interface driver ums-jumpshot
<6>[    1.109542] usbcore: registered new interface driver ums-karma
<6>[    1.109625] usbcore: registered new interface driver ums-onetouch
<6>[    1.109756] usbcore: registered new interface driver ums-sddr09
<6>[    1.109838] usbcore: registered new interface driver ums-sddr55
<6>[    1.109968] usbcore: registered new interface driver ums-usbat
<6>[    1.110087] usbcore: registered new interface driver usbserial
<6>[    1.110199] usbserial: USB Serial Driver core
<6>[    1.111022] file system registered
<6>[    1.111137] mbim_init: initialize 1 instances
<6>[    1.111310] mbim_init: Initialized 1 ports
<6>[    1.112653] rndis_qc_init: initialize rndis QC instance
<6>[    1.113061]  gadget: Mass Storage Function, version: 2009/09/11
<6>[    1.113126]  gadget: Number of LUNs=1
<6>[    1.113188]  lun0: LUN: removable file: (no medium)
<6>[    1.113537]  gadget: android_usb ready
<6>[    1.114933] mousedev: PS/2 mouse device common for all mice
<6>[    1.115184] usbcore: registered new interface driver xpad
<6>[    1.115274] usbcore: registered new interface driver usb_acecad
<6>[    1.115409] usbcore: registered new interface driver aiptek
<6>[    1.115495] usbcore: registered new interface driver gtco
<6>[    1.115630] usbcore: registered new interface driver hanwang
<6>[    1.115716] usbcore: registered new interface driver kbtab
<6>[    1.115852] usbcore: registered new interface driver wacom
<4>[    1.116079] 8941_l22: Failed to create debugfs directory
<4>[    1.116214] 8941_s3: Failed to create debugfs directory
<6>[    1.131445] msm_thermal:do_freq_control Limiting CPU0 max frequency to 1036800. Temp:72
<6>[    1.131632] msm_thermal:do_freq_control Limiting CPU1 max frequency to 1036800. Temp:72
<6>[    1.131764] msm_thermal:do_freq_control Limiting CPU2 max frequency to 1036800. Temp:72
<6>[    1.131952] msm_thermal:do_freq_control Limiting CPU3 max frequency to 1036800. Temp:72
<6>[    1.381447] msm_thermal:do_freq_control Limiting CPU0 max frequency to 883200. Temp:71
<6>[    1.381645] msm_thermal:do_freq_control Limiting CPU1 max frequency to 883200. Temp:71
<6>[    1.381786] msm_thermal:do_freq_control Limiting CPU2 max frequency to 883200. Temp:71
<6>[    1.381989] msm_thermal:do_freq_control Limiting CPU3 max frequency to 883200. Temp:71
<3>[    1.621415] [syna] vendor id: 2
<6>[    1.631451] msm_thermal:do_freq_control Limiting CPU0 max frequency to 652800. Temp:70
<6>[    1.631668] msm_thermal:do_freq_control Limiting CPU1 max frequency to 652800. Temp:70
<6>[    1.631835] msm_thermal:do_freq_control Limiting CPU2 max frequency to 652800. Temp:70
<6>[    1.632083] msm_thermal:do_freq_control Limiting CPU3 max frequency to 652800. Temp:70
<6>[    1.881467] msm_thermal:do_freq_control Limiting CPU0 max frequency to 300000. Temp:69
<6>[    1.881640] msm_thermal:do_freq_control Limiting CPU1 max frequency to 300000. Temp:69
<6>[    1.882076] msm_thermal:do_freq_control Limiting CPU2 max frequency to 300000. Temp:69
<6>[    1.882506] msm_thermal:do_freq_control Limiting CPU3 max frequency to 300000. Temp:69
<4>[    1.905752] [syna]maxx=1080,maxy=2040,vkh=114
<6>[    1.906444] input: synaptics-rmi-ts as /devices/f9924000.i2c/i2c-2/2-0020/input/input0
<4>[    1.907006] [syna]maxx=1080,maxy=2040,vkh=114
<4>[    2.302009] [syna] config id: [image]=0x14001222,[device]=0x14001242
<3>[    6.101457] dwc3 f9200000.dwc3: dwc3_otg_init_sm: completion timeout
<6>[    6.108159] msm-dwc3 msm_dwc3: DWC3 in low power mode
<5>[   15.672683] fwu_do_reflash: Firmware programmed
<5>[   15.789187] fwu_do_reflash: Configuration programmed
<4>[   16.133941] [syna]maxx=1080,maxy=2040,vkh=114
<6>[   16.183956] qcom,qpnp-rtc qpnp-rtc-ee12ca00: rtc core: registered qpnp_rtc as rtc0
<6>[   16.184580] i2c /dev entries driver
<7>[   16.189807] msm_vidc: 1: debugfs_create_file: firmware_unload_delay fail
<3>[   16.194709] msm_cci_probe: pdev ee0fbe00 device id = -1
<7>[   16.209115] Registered led device: torch-light
<3>[   16.842857] msm_eeprom_platform_probe line 901
<3>[   16.933688] msm_sensor_power_up:988
<4>[   16.936686] [syna]maxx=1080,maxy=2040,vkh=114
<3>[   16.955247] msm_sensor_power_up exit
<3>[   16.956363] msm_sensor_power_down:1172
<3>[   16.975617] msm_sensor_power_down exit
<3>[   16.975849] [sensor_proc_init]: create qcom_sensor_state proc success 
<3>[   16.978341] msm_sensor_power_up:988
<3>[   17.002589] msm_sensor_power_up exit
<3>[   17.003441] msm_sensor_power_down:1172
<3>[   17.025250] msm_sensor_power_down exit
<3>[   17.025473] [sensor_proc_init]: create qcom_sensor_state_1 proc success 
<3>[   17.030608] __msm_jpeg_init:946] Jpeg Device id 0
<3>[   17.031257] __msm_jpeg_init:946] Jpeg Device id 1
<3>[   17.032300] __msm_jpeg_init:946] Jpeg Device id 2
<6>[   17.053666] usbcore: registered new interface driver uvcvideo
<6>[   17.054048] USB Video Class driver (1.1.1)
<4>[   17.055796] i2c-core: driver [bq27541-battery] using legacy suspend method
<4>[   17.056014] i2c-core: driver [bq27541-battery] using legacy resume method
<6>[   17.056987] spmi qpnp-charger-ee12c400: Driver qcom,qpnp-charger requests probe deferral
<4>[   17.057807] lfc bq24196_probe
<6>[   17.060896] bq24196 SYS_STS:0x44,fault_reg:0x0
<6>[   17.063479] bq27541-battery 1-0055: DEVICE_TYPE is 0x541, FIRMWARE_VERSION is 0x200
<6>[   17.063878] bq27541-battery 1-0055: Complete bq27541 configuration 0x605B
<6>[   17.125802] device-mapper: uevent: version 1.0.3
<6>[   17.126514] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>[   17.127420] device-mapper: req-crypt: dm-req-crypt successfully initalized.
<6>[   17.127434] 
<6>[   17.127970] Bluetooth: HCI UART driver ver 2.2
<6>[   17.128169] Bluetooth: HCIATH3K protocol initialized
<6>[   17.132707] cpuidle: using governor ladder
<6>[   17.133070] cpuidle: using governor menu
<6>[   17.133343] sdhci: Secure Digital Host Controller Interface driver
<6>[   17.133698] sdhci: Copyright(c) Pierre Ossman
<6>[   17.133894] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[   17.140993] mmc0: no vmmc regulator found
<7>[   17.141591] Registered led device: mmc0::
<6>[   17.143041] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
<6>[   17.150488] mmc1: no vmmc regulator found
<7>[   17.151092] Registered led device: mmc1::
<6>[   17.152589] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
<3>[   17.154069] qcom,leds-qpnp leds-qpnp-ee12da00: Regulator get failed(-517)
<3>[   17.154433] qcom,leds-qpnp leds-qpnp-ee12da00: Unable to read flash config data
<6>[   17.154818] spmi leds-qpnp-ee12da00: Driver qcom,leds-qpnp requests probe deferral
<7>[   17.155416] Registered led device: button-backlight
<7>[   17.156340] Registered led device: kpdbl-lut-2
<7>[   17.156690] Registered led device: kpdbl-pwm-3
<7>[   17.157049] Registered led device: kpdbl-pwm-4
<4>[   17.158067] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1
<4>[   17.158431] QCE50: __qce_get_device_tree_data: ce-device =0x0
<4>[   17.158842] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000  
<4>[   17.159372] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc6040000
<4>[   17.159904] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000  
<4>[   17.160109] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
<6>[   17.161496] qce qcedev.0: Qualcomm Crypto 5.1.0 device found @0xfd440000
<6>[   17.161717] qce qcedev.0: CE device = 0x0
<6>[   17.161726] , IO base, CE = 0xc6040000
<6>[   17.161734] , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
<6>[   17.161744] IO base BAM = 0x0
<6>[   17.161750] BAM IRQ 268
<6>[   17.161757] Engines Availability = 0x1010853
<6>[   17.163230] sps:BAM 0xfd444000 is registered.
<6>[   17.164174] sps:BAM 0xfd444000 (va:0xc6020000) enabled: ver:0x20, number of pipes:8
<6>[   17.165475] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
<6>[   17.166150] qcedev: FIPS140-2 Known Answer Tests : Skipped
<4>[   17.168182] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x2
<4>[   17.168387] QCE50: __qce_get_device_tree_data: ce-device =0x0
<4>[   17.168988] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000  
<4>[   17.169369] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc6080000
<4>[   17.169903] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000  
<4>[   17.170260] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
<6>[   17.172449] qcrypto fd440000.qcrypto: Qualcomm Crypto 5.1.0 device found @0xfd440000
<6>[   17.172932] qcrypto fd440000.qcrypto: CE device = 0x0
<6>[   17.172943] , IO base, CE = 0xc6080000
<6>[   17.172951] , Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
<6>[   17.172960] IO base BAM = 0x0
<6>[   17.172967] BAM IRQ 268
<6>[   17.172973] Engines Availability = 0x1010853
<6>[   17.178083] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
<6>[   17.179159] qcrypto fd440000.qcrypto: qcrypto-ecb-aes
<6>[   17.179676] qcrypto fd440000.qcrypto: qcrypto-cbc-aes
<6>[   17.180475] qcrypto fd440000.qcrypto: qcrypto-ctr-aes
<6>[   17.181098] qcrypto fd440000.qcrypto: qcrypto-ecb-des
<6>[   17.181789] qcrypto fd440000.qcrypto: qcrypto-cbc-des
<6>[   17.182422] qcrypto fd440000.qcrypto: qcrypto-ecb-3des
<6>[   17.182921] qcrypto fd440000.qcrypto: qcrypto-cbc-3des
<6>[   17.183558] qcrypto fd440000.qcrypto: qcrypto-xts-aes
<6>[   17.184046] qcrypto fd440000.qcrypto: qcrypto-sha1
<6>[   17.184668] qcrypto fd440000.qcrypto: qcrypto-sha256
<6>[   17.185121] qcrypto fd440000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
<6>[   17.185735] qcrypto fd440000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
<6>[   17.186193] qcrypto fd440000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
<6>[   17.186808] qcrypto fd440000.qcrypto: qcrypto-hmac-sha1
<6>[   17.187263] qcrypto fd440000.qcrypto: qcrypto-hmac-sha256
<6>[   17.187882] qcrypto fd440000.qcrypto: qcrypto-aes-ccm
<6>[   17.188338] qcrypto fd440000.qcrypto: qcrypto-rfc4309-aes-ccm
<6>[   17.188694] qcrypto: FIPS140-2 Known Answer Tests: Skipped
<4>[   17.188974] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x0
<4>[   17.189343] QCE50: __qce_get_device_tree_data: ce-device =0x1
<4>[   17.189792] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000  
<4>[   17.190329] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc60c0000
<4>[   17.190707] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000  
<4>[   17.191063] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
<6>[   17.192370] qcrypto fd440000.qcrypto1: Qualcomm Crypto 5.1.0 device found @0xfd440000
<6>[   17.192587] qcrypto fd440000.qcrypto1: CE device = 0x1
<6>[   17.192598] , IO base, CE = 0xc60c0000
<6>[   17.192606] , Consumer (IN) PIPE 0,    Producer (OUT) PIPE 1
<6>[   17.192615] IO base BAM = 0x0
<6>[   17.192623] BAM IRQ 268
<6>[   17.192629] Engines Availability = 0x1010853
<6>[   17.195223] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
<6>[   17.195952] qcrypto: FIPS140-2 Known Answer Tests: Skipped
<6>[   17.201255] usbcore: registered new interface driver usbhid
<6>[   17.201509] usbhid: USB HID core driver
<6>[   17.202799] ashmem: initialized
<6>[   17.205288] sps:BAM 0xf9304000 is registered.
<6>[   17.205537] sps:BAM 0xf9a44000 is registered.
<3>[   17.205920] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
<6>[   17.207285] qcom,qpnp-power-on qpnp-power-on-ee12b600: PMIC@SID0 Power-on reason: Triggered from USB (USB charger insertion) and 'warm' boot
<6>[   17.207670] qcom,qpnp-power-on qpnp-power-on-ee12b600: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
<6>[   17.208543] input: qpnp_pon as /devices/virtual/input/input1
<6>[   17.211326] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=800 ohm
<6>[   17.213828] pft [pft_init]: Drivr initialized successfully May 18 2015 09:32:51.n
<6>[   17.214198] PMIC@SID4: PM8841 v2.1 options: 0, 0, 2, 2
<6>[   17.214879] PMIC@SID0: PM8941 v3.1 options: 0, 0, 0, 0
<6>[   17.215824] kraitbw-l2pm qcom,kraitbw-l2pm.41: BW HWmon governor registered.
<3>[   17.218157] devfreq qcom,cpubw.40: Couldn't update frequency transition information.
<6>[   17.221539] usbcore: registered new interface driver snd-usb-audio
<6>[   17.252055] mmc0: BKOPS_EN bit = 0
<6>[   17.264343] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
<6>[   17.271099] platform qcom,msm-voip-dsp.50: Driver msm-voip-dsp requests probe deferral
<6>[   17.273414] platform qcom,msm-pcm-voice.51: Driver msm-pcm-voice requests probe deferral
<6>[   17.283316] mmc0: new HS400 MMC card at address 0001
<6>[   17.284960] mmcblk0: mmc0:0001 064GE2 58.2 GiB 
<6>[   17.285628] ocmem: Notifier registered for 5
<6>[   17.286142] mmcblk0rpmb: mmc0:0001 064GE2 partition 3 4.00 MiB
<4>[   17.289998] Alternate GPT is invalid, using primary GPT.
<6>[   17.290719]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
<6>[   17.291967] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
<6>[   17.292542] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[   17.297801] oprofile: using arm/armv7-krait
<6>[   17.298233] u32 classifier
<6>[   17.298439]     Actions configured
<6>[   17.298651] Netfilter messages via NETLINK v0.30.
<6>[   17.299031] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>[   17.300783] ctnetlink v0.93: registering with nfnetlink.
<6>[   17.301084] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[   17.301532] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[   17.302605] xt_time: kernel timezone is -0000
<6>[   17.303785] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[   17.304632] arp_tables: (C) 2002 David S. Miller
<6>[   17.305174] TCP: cubic registered
<6>[   17.305381] Initializing XFRM netlink socket
<6>[   17.306887] NET: Registered protocol family 10
<6>[   17.314868] Mobile IPv6
<6>[   17.315157] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[   17.316064] IPv6 over IPv4 tunneling driver
<6>[   17.317650] NET: Registered protocol family 17
<6>[   17.317936] NET: Registered protocol family 15
<5>[   17.318564] Bridge firewalling registered
<6>[   17.318814] Ebtables v2.0 registered
<6>[   17.319126] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[   17.319646] L2TP core driver, V2.0
<6>[   17.319894] PPPoL2TP kernel driver, V2.0
<5>[   17.322998] Registering SWP/SWPB emulation handler
<6>[   17.348911] gdsc_oxili_gx: disabling
<6>[   17.349303] gdsc_venus: disabling
<6>[   17.352652] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
<6>[   17.353289] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<3>[   17.356101] qcom,leds-qpnp leds-qpnp-ee12da00: Regulator get failed(-517)
<3>[   17.356481] qcom,leds-qpnp leds-qpnp-ee12da00: Unable to read flash config data
<6>[   17.356719] spmi leds-qpnp-ee12da00: Driver qcom,leds-qpnp requests probe deferral
<6>[   17.363622] bq24196_vddmax_set voltage:4350
<3>[   17.365016] bad vbatdet:4250,default to 100mv
<6>[   17.366550] bq24196_ibatmax_set chg_current:2000
<6>[   17.370831] batfet: 
<6>[   17.371768] 8941_smbb_otg: 
<6>[   17.372249] 8941_smbb_otg: supplied by 8941_boost
<6>[   17.373477] 8941_smbb_boost: 5000 mV 
<6>[   17.394513] bq24196_vddmax_set voltage:4350
<6>[   17.402978] qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 1, dc = 0 b_health = 1 batt_present = 1
<6>[   17.404506] ethernet_phy: 
<6>[   17.406790] 8941_mvs1: 
<6>[   17.407083] 8941_mvs1: supplied by 8941_smbb_otg
<6>[   17.409211] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
<6>[   17.410995] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<7>[   17.412660] Registered led device: led:flash_0
<7>[   17.413501] Registered led device: led:flash_1
<7>[   17.414137] Registered led device: led:flash_torch
<6>[   17.415876] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
<6>[   17.417815] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[   17.424360] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
<7>[   17.425368] gpio_set_debounce: gpio-410 status -22
<7>[   17.425962] gpio_set_debounce: gpio-411 status -22
<7>[   17.426446] gpio_set_debounce: gpio-412 status -22
<6>[   17.426473] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<7>[   17.427308] gpio_set_debounce: gpio-409 status -22
<7>[   17.427792] gpio_set_debounce: gpio-68 status -22
<6>[   17.428763] input: gpio-keys as /devices/gpio_keys.83/input/input2
<6>[   17.430416] qcom,qpnp-rtc qpnp-rtc-ee12ca00: setting system clock to 1970-06-22 12:50:32 UTC (14907032)
<6>[   17.431042] msm_thermal:interrupt_mode_init Interrupt mode init
<6>[   17.431073] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
<6>[   17.431852] msm_thermal:disable_msm_thermal Max frequency reset for CPU0
<6>[   17.432194] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[   17.432660] msm_thermal:disable_msm_thermal Max frequency reset for CPU1
<6>[   17.433165] msm_thermal:disable_msm_thermal Max frequency reset for CPU2
<6>[   17.433289] msm_thermal:disable_msm_thermal Max frequency reset for CPU3
<6>[   17.434162] clock_late_init: Removing enables held for handed-off clocks
<6>[   17.438446] ALSA device list:
<6>[   17.438514]   No soundcards found.
<4>[   17.438590] Warning: unable to open an initial console.
<6>[   17.438660] Freeing init memory: 84K
<7>[   17.441731] SELinux: 2048 avtab hash slots, 7905 rules.
<7>[   17.442900] SELinux: 2048 avtab hash slots, 7905 rules.
<7>[   17.442912] SELinux:  1 users, 2 roles, 622 types, 0 bools, 1 sens, 1024 cats
<7>[   17.442919] SELinux:  86 classes, 7905 rules
<7>[   17.443467] SELinux:  Completing initialization.
<7>[   17.443471] SELinux:  Setting up existing superblocks.
<7>[   17.443483] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<7>[   17.443495] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>[   17.443892] SELinux: initialized (dev bdev, type bdev), not configured for labeling
<7>[   17.443902] SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>[   17.443916] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[   17.443930] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>[   17.450474] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>[   17.450484] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>[   17.450494] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
<7>[   17.450503] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>[   17.450521] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>[   17.450581] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[   17.450602] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>[   17.455192] type=1403 audit(14907032.520:2): policy loaded auid=4294967295 ses=4294967295
<6>[   17.516057] msm-dwc3 msm_dwc3: DWC3 exited from low power mode
<6>[   18.244327] healthd: battery l=17 v=3737 t=42.2 h=2 st=2 c=0 chg=u
<6>[   18.261504] dwc3 f9200000.dwc3: Avail curr from USB = 500
<3>[   18.267907] qpnp_start_charging: qpnp_start_charging:starting to enable charging
<6>[   18.267988] bq24196_vddmax_set voltage:4350
<6>[   18.268789] bq24196_ibatmax_set chg_current:500
<3>[   18.269601] bad vbatdet:4250,default to 100mv
<3>[   18.270437] qpnp_start_charging: qpnp_start_charging:starting charging failed
<6>[   18.277372] healthd: battery l=17 v=3737 t=42.2 h=2 st=2 c=0 chg=u
<6>[   18.287857] healthd: battery l=17 v=3737 t=42.2 h=2 st=2 c=0 chg=u
<6>[   18.300887] healthd: battery l=17 v=3737 t=42.2 h=2 st=2 c=0 chg=u
<6>[   18.308628] healthd: battery l=17 v=3737 t=42.2 h=2 st=2 c=0 chg=u
<6>[   18.316370] healthd: battery l=17 v=3737 t=42.2 h=2 st=2 c=0 chg=u
<6>[   19.267619] healthd: battery l=17 v=3726 t=42.2 h=2 st=2 c=0 chg=u
<6>[   19.288993] healthd: battery l=17 v=3726 t=42.2 h=2 st=2 c=0 chg=u
<7>[   19.636254] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[   19.637482] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
<3>[   19.637565] enable_store: android_usb: already disabled
<3>[   19.735833] EXT4-fs (mmcblk0p28): VFS: Can't find ext4 filesystem
<6>[   19.735990] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/userdata,target=/data,type=ext4)=-1
<3>[   19.736376] fs_mgr: fs_mgr_mount_all(): possibly an encryptable blkdev /dev/block/platform/msm_sdcc.1/by-name/userdata for mount /data type ext4 )
<7>[   19.736510] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<5>[   19.737822] type=1400 audit(14907034.799:3): avc:  denied  { create } for  pid=187 comm="init" name="blkid.tab" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
<5>[   19.737941] type=1400 audit(14907034.799:4): avc:  denied  { write } for  pid=187 comm="init" name="blkid.tab" dev="rootfs" ino=7183 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
<6>[   19.740389] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[   19.740466] SELinux: initialized (dev mmcblk0p16, type ext4), uses xattr
<6>[   19.740510] fs_mgr: check_fs(): mount(/dev/block/platform/msm_sdcc.1/by-name/cache,/cache,ext4)=0
<6>[   19.741462] fs_mgr: Not running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/cache (executable not in system image)
<6>[   19.743504] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc,errors=panic
<7>[   19.743579] SELinux: initialized (dev mmcblk0p16, type ext4), uses xattr
<6>[   19.743605] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/cache,target=/cache,type=ext4)=0
<5>[   19.745266] type=1400 audit(14907034.809:5): avc:  denied  { setattr } for  pid=187 comm="init" name="blkid.tab-CCklus" dev="rootfs" ino=8634 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
<5>[   19.745430] type=1400 audit(14907034.809:6): avc:  denied  { link } for  pid=187 comm="init" name="blkid.tab" dev="rootfs" ino=7183 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
<5>[   19.745522] type=1400 audit(14907034.809:7): avc:  denied  { rename } for  pid=187 comm="init" name="blkid.tab-CCklus" dev="rootfs" ino=8634 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
<5>[   19.745632] type=1400 audit(14907034.809:8): avc:  denied  { unlink } for  pid=187 comm="init" name="blkid.tab" dev="rootfs" ino=7183 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
<6>[   19.745770] fs_mgr: check_fs(): mount(/dev/block/platform/msm_sdcc.1/by-name/persist,/persist,ext4)=-1
<6>[   19.745852] fs_mgr: Not running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/persist (executable not in system image)
<6>[   19.747571] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nodelalloc,nomblk_io_submit,errors=panic
<7>[   19.747647] SELinux: initialized (dev mmcblk0p15, type ext4), uses xattr
<6>[   19.747684] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/persist,target=/persist,type=ext4)=0
<7>[   19.752077] SELinux: initialized (dev mmcblk0p1, type vfat), uses mountpoint labeling
<6>[   19.752098] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/modem,target=/firmware,type=vfat)=0
<3>[   19.752505] init: Unable to open persistent property directory /data/property errno: 2
<3>[   19.752627] init: Unable to open persistent property directory /data/property errno: 2
<3>[   19.754810] init: Warning!  Service recovery needs a SELinux domain defined; please fix!
<3>[   19.755214] init: Warning!  Service qseecomd needs a SELinux domain defined; please fix!
<6>[   19.755751] msm_thermal:store_cc_enabled Core control disabled
<5>[   19.756335] type=1400 audit(14907034.819:9): avc:  denied  { write } for  pid=195 comm="toolbox" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1
<6>[   19.759831] msm_thermal:store_cc_enabled Core control enabled
<6>[   19.760286] warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
<6>[   19.788646] read descriptors
<6>[   19.788691] read strings
<6>[   19.788738] mtp_bind_config
<4>[   19.875369] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time
<4>[   19.876793] QSEECOM: qseecom_load_app: App with id 2 (keymaste) now loaded
<6>[   19.896845] dwc3 f9200000.dwc3: Avail curr from USB = 2
<6>[   19.896899] android_work: android_work: did not send uevent (0 0   (null))
<5>[   19.897821] type=1400 audit(14907034.959:10): avc:  denied  { execmem } for  pid=196 comm="recovery" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1
<5>[   19.897907] type=1400 audit(14907034.959:11): avc:  denied  { execute } for  pid=196 comm="recovery" path="/dev/ashmem" dev="tmpfs" ino=8379 scontext=u:r:init:s0 tcontext=u:object_r:ashmem_device:s0 tclass=chr_file permissive=1
<6>[   19.924520] healthd: battery l=17 v=3725 t=42.2 h=2 st=2 c=0 chg=u
<6>[   19.932086] healthd: battery l=17 v=3725 t=42.2 h=2 st=2 c=0 chg=u
<3>[   19.934767] EXT4-fs (mmcblk0p28): VFS: Can't find ext4 filesystem
<3>[   19.935069] EXT4-fs (mmcblk0p28): VFS: Can't find ext4 filesystem
<3>[   19.940791] EXT4-fs (mmcblk0p28): VFS: Can't find ext4 filesystem
<3>[   19.941101] EXT4-fs (mmcblk0p28): VFS: Can't find ext4 filesystem
<6>[   19.953074] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: 
<7>[   19.953150] SELinux: initialized (dev mmcblk0p14, type ext4), uses xattr
<6>[   20.016824] dwc3 f9200000.dwc3: Avail curr from USB = 0
<6>[   20.036108] healthd: battery l=17 v=3725 t=42.2 h=2 st=2 c=0 chg=u
<6>[   20.043674] healthd: battery l=17 v=3725 t=42.2 h=2 st=2 c=0 chg=u
<6>[   20.128905] android_work: android_work: sent uevent USB_STATE=CONNECTED
<6>[   20.132638] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
<6>[   20.148172] healthd: battery l=17 v=3725 t=42.2 h=2 st=2 c=0 chg=u
<6>[   20.156152] healthd: battery l=17 v=3725 t=42.2 h=2 st=2 c=0 chg=u
<6>[   20.260852] android_work: android_work: sent uevent USB_STATE=CONNECTED
<6>[   20.262761] android_usb gadget: high-speed config #1: fe8050c8.android_usb
<6>[   20.262894] dwc3 f9200000.dwc3: Avail curr from USB = 500
<3>[   20.276837] qpnp_start_charging: qpnp_start_charging:starting to enable charging
<6>[   20.276893] bq24196_vddmax_set voltage:4350
<6>[   20.277714] bq24196_ibatmax_set chg_current:500
<3>[   20.278516] bad vbatdet:4250,default to 100mv
<3>[   20.279350] qpnp_start_charging: qpnp_start_charging:starting charging failed
<6>[   20.294260] healthd: battery l=17 v=3725 t=42.2 h=2 st=2 c=0 chg=u
<6>[   20.306502] healthd: battery l=17 v=3725 t=42.2 h=2 st=2 c=0 chg=u
<6>[   20.323256] healthd: battery l=17 v=3725 t=42.2 h=2 st=2 c=0 chg=u
<6>[   20.331436] android_work: android_work: sent uevent USB_STATE=CONFIGURED
<6>[   24.060639] healthd: battery l=17 v=3753 t=42.2 h=2 st=2 c=0 chg=u
<6>[   30.100552] healthd: battery l=17 v=3737 t=42.2 h=2 st=2 c=0 chg=u
<6>[   30.411398] Releasing sensor regulator
<3>[   34.854044] QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -65,app_id = 0,lstr = 12288
<6>[   36.100788] healthd: battery l=17 v=3738 t=42.2 h=2 st=2 c=0 chg=u
<3>[   40.024171] EXT4-fs (dm-0): VFS: Can't find ext4 filesystem
<3>[   40.025140] EXT4-fs (dm-0): VFS: Can't find ext4 filesystem
<6>[   40.059414] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: 
<7>[   40.059495] SELinux: initialized (dev mmcblk0p14, type ext4), uses xattr
<3>[   40.100439] EXT4-fs (dm-0): VFS: Can't find ext4 filesystem
<3>[   40.122059] EXT4-fs (dm-0): VFS: Can't find ext4 filesystem
<3>[   40.144360] EXT4-fs (dm-0): VFS: Can't find ext4 filesystem
<3>[   40.158781] EXT4-fs (dm-0): VFS: Can't find ext4 filesystem
<3>[   40.228609] EXT4-fs (dm-0): VFS: Can't find ext4 filesystem
<3>[   40.229193] EXT4-fs (dm-0): VFS: Can't find ext4 filesystem
<3>[   40.255645] EXT4-fs (dm-0): VFS: Can't find ext4 filesystem
<3>[   41.009461] lm3630_bank_a_update_status set brightness :  255 
<6>[   41.693107] mtp_open
<6>[   42.100663] healthd: battery l=17 v=3753 t=42.2 h=2 st=2 c=0 chg=u
<6>[   48.111901] healthd: battery l=17 v=3751 t=42.2 h=2 st=2 c=0 chg=u
<6>[   54.111940] healthd: battery l=17 v=3752 t=42.2 h=2 st=2 c=0 chg=u
<6>[   60.104095] healthd: battery l=17 v=3753 t=42.1 h=2 st=2 c=0 chg=u

RECOVERY.LOG:

__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting TWRP 2.8.6.1 on Mon Jun 22 12:50:34 1970
 (pid 196)
BOARD_HAS_NO_REAL_SDCARD := true
RECOVERY_SDCARD_ON_DATA := true
TW_NO_USB_STORAGE := true
TW_INCLUDE_CRYPTO := true
I:Found brightness file at '/sys/class/leds/lcd-backlight/brightness'
I:TWFunc::Set_Brightness: Setting brightness control to 255
Starting the UI...Pixel format: 1080x1920 @ 32bpp
Pixel format: RGB_565
Using qcomm overlay
Left Split=0
Right Split=0
Using qualcomm overlay
framebuffer: fd 3 (1080 x 1920)
=> Linking mtab
Renaming regular /etc/recovery.fstab -> /etc/recovery.fstab.bak
Moving /etc/twrp.fstab -> /etc/recovery.fstab
=> Processing recovery.fstab
I:Processing '/sbl1'
I:Processing '/rpm'
I:Processing '/tz'
I:Processing '/modem_st1'
I:Processing '/modem_st2'
I:Processing '/static_nv_bk'
I:Processing '/oppodycnvbk'
I:Processing '/aboot'
I:Processing '/boot'
I:Processing '/system'
I:Processing '/data'
I:Setting up '/data' as data/media emulated storage.
I:Created '/sdcard' folder.
I:Can't probe device /dev/block/mmcblk0p28
I:Unable to mount '/data'
I:Actual block device: '/dev/block/mmcblk0p28', current file system: 'ext4'
I:Can't probe device /dev/block/mmcblk0p28
I:Unable to mount '/data'
I:Actual block device: '/dev/block/mmcblk0p28', current file system: 'ext4'
get_crypt_ftr_info crypto key location: '/dev/block/mmcblk0p27'
I:Processing '/cache'
I:Processing '/misc'
I:Processing '/recovery'
I:Processing '/logo'
I:Processing '/reserve4'
I:Processing '/usb_otg'
I:Created '/usb_otg' folder.
I:Backup folder set to '/data/media/TWRP/BACKUPS/48e96753'
I:Settings storage is '/data/media'
Updating partition details...
I:Unable to mount '/usb_otg'
I:Actual block device: '', current file system: 'vfat'
...done
E:Unable to mount storage.
I:Unmounting main partitions...


Partition Logs:
/sbl1 | /dev/block/mmcblk0p2 | Size: 0MB
   Flags: IsPresent 
   Primary_Block_Device: /dev/block/mmcblk0p2
   Display_Name: sbl1
   Storage_Name: sbl1
   Backup_Path: /sbl1
   Backup_Name: sbl1
   Backup_Display_Name: sbl1
   Storage_Path: /sbl1
   Current_File_System: emmc
   Fstab_File_System: emmc
   Backup_Method: dd

/rpm | /dev/block/mmcblk0p6 | Size: 0MB
   Flags: IsPresent 
   Primary_Block_Device: /dev/block/mmcblk0p6
   Display_Name: rpm
   Storage_Name: rpm
   Backup_Path: /rpm
   Backup_Name: rpm
   Backup_Display_Name: rpm
   Storage_Path: /rpm
   Current_File_System: emmc
   Fstab_File_System: emmc
   Backup_Method: dd

/tz | /dev/block/mmcblk0p8 | Size: 0MB
   Flags: IsPresent 
   Primary_Block_Device: /dev/block/mmcblk0p8
   Display_Name: tz
   Storage_Name: tz
   Backup_Path: /tz
   Backup_Name: tz
   Backup_Display_Name: tz
   Storage_Path: /tz
   Current_File_System: emmc
   Fstab_File_System: emmc
   Backup_Method: dd

/modem_st1 | /dev/block/mmcblk0p10 | Size: 1MB
   Flags: IsPresent 
   Primary_Block_Device: /dev/block/mmcblk0p10
   Display_Name: modem_st1
   Storage_Name: modem_st1
   Backup_Path: /modem_st1
   Backup_Name: modem_st1
   Backup_Display_Name: modem_st1
   Storage_Path: /modem_st1
   Current_File_System: emmc
   Fstab_File_System: emmc
   Backup_Method: dd

/modem_st2 | /dev/block/mmcblk0p11 | Size: 1MB
   Flags: IsPresent 
   Primary_Block_Device: /dev/block/mmcblk0p11
   Display_Name: modem_st2
   Storage_Name: modem_st2
   Backup_Path: /modem_st2
   Backup_Name: modem_st2
   Backup_Display_Name: modem_st2
   Storage_Path: /modem_st2
   Current_File_System: emmc
   Fstab_File_System: emmc
   Backup_Method: dd

/static_nv_bk | /dev/block/mmcblk0p13 | Size: 10MB
   Flags: IsPresent 
   Primary_Block_Device: /dev/block/mmcblk0p13
   Display_Name: static_nv_bk
   Storage_Name: static_nv_bk
   Backup_Path: /static_nv_bk
   Backup_Name: static_nv_bk
   Backup_Display_Name: static_nv_bk
   Storage_Path: /static_nv_bk
   Current_File_System: emmc
   Fstab_File_System: emmc
   Backup_Method: dd

/oppodycnvbk | /dev/block/mmcblk0p12 | Size: 10MB
   Flags: IsPresent 
   Primary_Block_Device: /dev/block/mmcblk0p12
   Display_Name: oppodycnvbk
   Storage_Name: oppodycnvbk
   Backup_Path: /oppodycnvbk
   Backup_Name: oppodycnvbk
   Backup_Display_Name: oppodycnvbk
   Storage_Path: /oppodycnvbk
   Current_File_System: emmc
   Fstab_File_System: emmc
   Backup_Method: dd

/aboot | /dev/block/mmcblk0p5 | Size: 1MB
   Flags: IsPresent 
   Primary_Block_Device: /dev/block/mmcblk0p5
   Display_Name: aboot
   Storage_Name: aboot
   Backup_Path: /aboot
   Backup_Name: aboot
   Backup_Display_Name: aboot
   Storage_Path: /aboot
   Current_File_System: emmc
   Fstab_File_System: emmc
   Backup_Method: dd

/boot | /dev/block/mmcblk0p7 | Size: 16MB
   Flags: Can_Be_Backed_Up IsPresent Can_Flash_Img 
   Primary_Block_Device: /dev/block/mmcblk0p7
   Display_Name: Boot
   Storage_Name: boot
   Backup_Path: /boot
   Backup_Name: boot
   Backup_Display_Name: Boot
   Storage_Path: /boot
   Current_File_System: emmc
   Fstab_File_System: emmc
   Backup_Method: dd

/system | /dev/block/mmcblk0p14 | Size: 1303MB Used: 893MB Free: 409MB Backup Size: 893MB
   Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent 
   Primary_Block_Device: /dev/block/mmcblk0p14
   Display_Name: System
   Storage_Name: System
   Backup_Path: /system
   Backup_Name: system
   Backup_Display_Name: System
   Storage_Path: /system
   Current_File_System: ext4
   Fstab_File_System: ext4
   Backup_Method: files

/data | /dev/block/mmcblk0p28 | Size: 57139MB
   Flags: Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Be_Encrypted Is_Encrypted Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Is_Settings_Storage 
   Symlink_Path: /data/media
   Symlink_Mount_Point: /sdcard
   Primary_Block_Device: /dev/block/mmcblk0p28
   Crypto_Key_Location: /dev/block/mmcblk0p27
   Display_Name: data
   Storage_Name: Internal Storage
   Backup_Path: /data
   Backup_Name: data
   Backup_Display_Name: Data
   Storage_Path: /data/media
   Current_File_System: emmc
   Fstab_File_System: ext4
   Backup_Method: dd
   MTP_Storage_ID: 65537

/cache | /dev/block/mmcblk0p16 | Size: 503MB Used: 8MB Free: 495MB Backup Size: 8MB
   Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent 
   Primary_Block_Device: /dev/block/mmcblk0p16
   Display_Name: Cache
   Storage_Name: Cache
   Backup_Path: /cache
   Backup_Name: cache
   Backup_Display_Name: Cache
   Storage_Path: /cache
   Current_File_System: ext4
   Fstab_File_System: ext4
   Backup_Method: files

/misc | /dev/block/mmcblk0p21 | Size: 1MB
   Flags: IsPresent 
   Primary_Block_Device: /dev/block/mmcblk0p21
   Display_Name: misc
   Storage_Name: misc
   Backup_Path: /misc
   Backup_Name: misc
   Backup_Display_Name: misc
   Storage_Path: /misc
   Current_File_System: emmc
   Fstab_File_System: emmc
   Backup_Method: dd

/recovery | /dev/block/mmcblk0p17 | Size: 16MB
   Flags: IsPresent Can_Flash_Img 
   Primary_Block_Device: /dev/block/mmcblk0p17
   Display_Name: Recovery
   Storage_Name: recovery
   Backup_Path: /recovery
   Backup_Name: recovery
   Backup_Display_Name: Recovery
   Storage_Path: /recovery
   Current_File_System: emmc
   Fstab_File_System: emmc
   Backup_Method: dd

/logo | /dev/block/mmcblk0p22 | Size: 16MB
   Flags: IsPresent 
   Primary_Block_Device: /dev/block/mmcblk0p22
   Display_Name: logo
   Storage_Name: logo
   Backup_Path: /logo
   Backup_Name: logo
   Backup_Display_Name: logo
   Storage_Path: /logo
   Current_File_System: emmc
   Fstab_File_System: emmc
   Backup_Method: dd

/reserve4 | /dev/block/mmcblk0p27 | Size: 64MB
   Flags: IsPresent 
   Primary_Block_Device: /dev/block/mmcblk0p27
   Display_Name: reserve4
   Storage_Name: reserve4
   Backup_Path: /reserve4
   Backup_Name: reserve4
   Backup_Display_Name: reserve4
   Storage_Path: /reserve4
   Current_File_System: emmc
   Fstab_File_System: emmc
   Backup_Method: dd

/usb_otg |  | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
   Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable Is_Storage 
   Primary_Block_Device: /dev/block/sda1
   Alternate_Block_Device: /dev/block/sda
   Display_Name: USB-OTG
   Storage_Name: USB-OTG
   Backup_Path: /usb_otg
   Backup_Name: usb_otg
   Backup_Display_Name: USB-OTG
   Storage_Path: /usb_otg
   Current_File_System: vfat
   Fstab_File_System: vfat
   Backup_Method: files
   MTP_Storage_ID: 65538

I:Loading package: TWRP (/twres/ui.xml)
I:Load XML directly
I:Checking resolution...
I:Loading resources...
open_png /twres/images/twrplogo.png
libpng warning: iCCP: Not recognizing known sRGB profile that has been edited
open_png /twres/images/menu-button.png
open_png /twres/images/file.png
open_png /twres/images/folder.png
open_png /twres/images/slideout.png
open_png /twres/images/indeterminate001.png
open_png /twres/images/indeterminate002.png
open_png /twres/images/indeterminate003.png
open_png /twres/images/indeterminate004.png
open_png /twres/images/indeterminate005.png
open_png /twres/images/indeterminate006.png
open_png /twres/images/indeterminate007.png
open_png /twres/images/progress_empty.png
open_png /twres/images/progress_fill.png
open_png /twres/images/checkbox_empty.png
open_png /twres/images/checkbox_checked.png
open_png /twres/images/radio_empty.png
open_png /twres/images/radio_selected.png
open_png /twres/images/medium-button.png
open_png /twres/images/sort-button.png
open_png /twres/images/minus-button.png
open_png /twres/images/plus-button.png
open_png /twres/images/home-icon.png
open_png /twres/images/back-icon.png
open_png /twres/images/slider.png
open_png /twres/images/slider-used.png
open_png /twres/images/slider-touch.png
open_png /twres/images/unlock.png
open_png /twres/images/keyboard1.png
open_png /twres/images/keyboard2.png
open_png /twres/images/keyboard3.png
open_png /twres/images/keyboard4.png
open_png /twres/images/cursor.png
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:PageSet::CheckInclude loading filename: '/twres/portrait.xml'
I:Loading included resources...
I:Loading included variables...
I:Loading mouse cursor...
I:Loading included pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page install_image
I:Loading page flashimage_confirm
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page checkpartitionlist
I:Loading page partitionoptions
I:Loading page refreshfilesystem
I:Loading page selectfilesystem
I:Loading page backup
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Unable to open '/data/media/TWRP/BACKUPS/48e96753'
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page selectstorage
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page reboot
I:Loading page settings
I:Loading page timezone
I:Loading page screen
I:Loading page Vibrate
I:Loading page advanced
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageracction
I:Loading page decrypt
I:Loading page decrypt_pattern
I:Loading page trydecrypt
I:Loading page terminalfolder
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page fixperms
I:Loading page installsu
I:Switching packages (TWRP)
SELinux contexts loaded from /file_contexts
Full SELinux support is present.
Startup Commands: 
av.offload.enable=true
av.streaming.offload.enable=true
mm.enable.qcom_parser=3310129
mm.enable.smoothstreaming=true
ro.cm.device=bacon
ro.cm.display.version=12-20150518-UNOFFICIAL-bacon
ro.cm.version=12-20150518-UNOFFICIAL-bacon
ro.cm.releasetype=UNOFFICIAL
ro.qc.sdk.audio.fluencetype=fluence
ro.qc.sdk.camera.facialproc=true
ro.qc.sdk.gestures.camera=false
ro.sf.lcd_density=480
ro.com.google.clientidbase=android-oneplus
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.com.android.wifi-watchlist=GoogleGuest
ro.gps.agps_provider=1
ro.qti.sdk.sensors.gestures=true
ro.qti.sensors.bte=true
ro.qti.sensors.vmd=true
ro.qti.sensors.gtap=true
ro.qti.sensors.ir_proximity=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.boot.ftm=0
ro.boot.emmc=true
ro.boot.mode=recovery
ro.boot.selinux=permissive
ro.boot.baseband=msm
ro.boot.hardware=bacon
ro.boot.serialno=48e96753
ro.boot.bootdevice=msm_sdcc.1
ro.boot.startupmode=charger
ro.data.large_tcp_window_size=true
ro.hwui.path_cache_size=32
ro.hwui.layer_cache_size=48
ro.hwui.texture_cache_size=72
ro.hwui.gradient_cache_size=1
ro.hwui.r_buffer_cache_size=8
ro.hwui.drop_shadow_cache_size=6
ro.hwui.text_large_cache_width=2048
ro.hwui.text_small_cache_width=1024
ro.hwui.text_large_cache_height=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.texture_cache_flushrate=0.4
ro.oppo.rf_version=99
ro.oppo.pcb_version=12
ro.twrp.boot=1
ro.twrp.version=2.8.6.1
ro.wifi.channels=
ro.allow.mock.location=1
ro.board.platform=msm8974
ro.build.id=LRX22G
ro.build.date=Mon May 18 09:30:12 EDT 2015
ro.build.date.utc=1431955812
ro.build.host=build
ro.build.tags=test-keys
ro.build.type=eng
ro.build.user=jenkins
ro.build.display.id=bacon-eng 5.0.2 LRX22G 7eddfe8da8 test-keys
ro.build.product=A0001
ro.build.selinux=1
ro.build.version.sdk=21
ro.build.version.release=5.0.2
ro.build.version.codename=REL
ro.build.version.incremental=7eddfe8da8
ro.build.version.all_codenames=REL
ro.build.description=bacon-user 4.4.2 KVT49L XNPH25R release-keys
ro.build.fingerprint=oneplus/bacon/A0001:4.4.2/KVT49L/XNPH25R:user/release-keys
ro.build.characteristics=nosdcard
ro.config.ringtone=Orion.ogg
ro.config.alarm_alert=Hassium.ogg
ro.config.notification_sound=Argon.ogg
ro.crypto.state=encrypted
ro.dalvik.vm.native.bridge=0
ro.kernel.android.checkjni=1
ro.secure=0
ro.vendor.extension_library=libqti-perfd-client.so
ro.zygote=zygote32
ro.carrier=unknown
ro.cmlegal.url=https://www.cyanogenmod.org/docs/privacy
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.name=bacon
ro.product.board=MSM8974
ro.product.brand=oneplus
ro.product.model=A0001
ro.product.device=A0001
ro.product.locale.region=US
ro.product.locale.language=en
ro.product.manufacturer=OnePlus
ro.baseband=msm
ro.bootmode=recovery
ro.hardware=bacon
ro.opengles.version=196608
ro.qualcomm.bt.hci_transport=smd
ro.qualcomm.cabl=0
ro.qualcomm.perf.cores_online=2
ro.revision=0
ro.serialno=48e96753
ro.telephony.call_ring.multiple=0
ro.telephony.default_network=9
ro.bootloader=unknown
ro.debuggable=1
ro.modversion=12-20150518-UNOFFICIAL-bacon
ro.rommanager.developerid=cyanogenmod
ro.factorytest=0
ro.setupwizard.enterprise_mode=1
ro.use_data_netmgrd=true
net.bt.name=Android
net.change=net.bt.name
rol.ril.ext.ecclist=112,911,999,110,122,119,120,000,08,118
sys.keymaster.loaded=true
sys.listeners.registered=true
use.voice.path.for.pcm.voip=true
init.svc.adbd=running
init.svc.healthd=running
init.svc.ueventd=running
init.svc.qseecomd=running
init.svc.recovery=running
init.svc.set_permissive=stopped
rild.libpath=/system/vendor/lib/libril-qc-qmi-1.so
twrp.crash_counter=0
vold.decrypt=trigger_default_encryption
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
audio.offload.pcm.16bit.enable=true
audio.offload.pcm.24bit.enable=true
audio.offload.buffer.size.kb=32
audio.offload.gapless.enabled=true
audio.offload.multiple.enabled=false
media.aac_51_output_enabled=true
dalvik.vm.isa.arm.features=div
dalvik.vm.heapsize=512m
dalvik.vm.dex2oat-Xms=64m
dalvik.vm.dex2oat-Xmx=512m
dalvik.vm.heapmaxfree=8m
dalvik.vm.heapminfree=2m
dalvik.vm.heapstartsize=16m
dalvik.vm.dex2oat-filter=interpret-only
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.image-dex2oat-Xms=64m
dalvik.vm.image-dex2oat-Xmx=64m
dalvik.vm.image-dex2oat-filter=verify-none
dalvik.vm.heaptargetutilization=0.75
tunnel.audio.encode=true
camera2.portability.force_api=1
persist.gps.qc_nlp_in_use=0
persist.hwc.mdpcomp.enable=true
persist.sys.dun.override=0
persist.sys.usb.config=mtp
persist.sys.dalvik.vm.lib.2=libart.so
persist.sys.root_access=0
persist.sys.isUsbOtgEnabled=true
persist.sys.recovery_update=false
persist.data.netmgrd.qos.enable=true
persist.data.tcpackprio.enable=true
persist.audio.fluence.voicecall=true
persist.radio.add_power_save=1
persist.radio.apm_sim_not_pwdn=1
persist.timed.enable=true
service.adb.root=1
keyguard.no_require_sim=true
recovery.perf.mode=0
telephony.lteOnGsmDevice=1

I:Copying file /cache/recovery/log to /cache/recovery/last_log
I:Is encrypted, do decrypt page first
I:Switching packages (TWRP)
I:Set page: 'decrypt'
I:Set page: 'trydecrypt'
I:operation_start: 'Decrypt'
CONFIG_HW_DISK_ENCRYPTION present
hexadj_passwd converting to lower case for hardware disk crypto.
has_hw_crypto is 1
crypt_ftr->fs_size = 117021080
Using scrypt with keymaster for cryptfs KDF
Signing safely-padded object
create_crypto_blk_dev extra_params set to fde_enabled
load_crypto_mapping_table using req-crypt
load_crypto_mapping_table: target_type = req-crypt
load_crypto_mapping_table: real_blk_name = /dev/block/mmcblk0p28, extra_params = fde_enabled
Password matches
Data successfully decrypted, new block device: '/dev/block/dm-0'
I:Can't probe device /dev/block/dm-0
I:Unable to mount '/data'
I:Actual block device: '/dev/block/dm-0', current file system: 'ext4'
Updating partition details...
I:Can't probe device /dev/block/dm-0
I:Unable to mount '/data'
I:Actual block device: '/dev/block/dm-0', current file system: 'ext4'
I:Unable to mount '/usb_otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Can't probe device /dev/block/dm-0
I:Unable to mount '/data'
I:Actual block device: '/dev/block/dm-0', current file system: 'ext4'
E:Unable to mount storage.
I:Unmounting main partitions...
tw_get_context failed to get selinux context
I:Failed to get default contexts and file mode for storage files.
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:operation_end - status=0
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Can't probe device /dev/block/dm-0
I:Unable to mount '/data'
I:Actual block device: '/dev/block/dm-0', current file system: 'ext4'
E:Unable to mount settings storage during GUI startup.
I:Can't probe device /dev/block/dm-0
I:Unable to mount '/data'
I:Actual block device: '/dev/block/dm-0', current file system: 'ext4'
I:Can't probe device /dev/block/dm-0
I:Unable to mount '/data'
I:Actual block device: '/dev/block/dm-0', current file system: 'ext4'
E:Unable to mount /data/media/TWRP/.twrps when trying to read settings file.
I:Attempt to load settings from settings file...
I:Settings file '/data/media/TWRP/.twrps' not found.
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Can't probe device /dev/block/dm-0
I:Unable to mount '/data'
I:Actual block device: '/dev/block/dm-0', current file system: 'ext4'
I:Unable to mount '/usb_otg'
I:Actual block device: '', current file system: 'vfat'
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT,M3.2.0,M11.1.0!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:TWFunc::Fixup_Time: Pre-fix date and time: 1970-06-22--07-50-55
I:TWFunc::Fixup_Time: Setting time offset from file /sys/class/rtc/rtc0/since_epoch
I:TWFunc::Fixup_Time: will attempt to use the ats files now.
I:Can't probe device /dev/block/dm-0
I:Unable to mount '/data'
I:Actual block device: '/dev/block/dm-0', current file system: 'ext4'
I:Enabling MTP during startup
I:Starting MTP
Starting MTP
I:Can't probe device /dev/block/dm-0
E:Unable to mount '/data'
I:Actual block device: '/dev/block/dm-0', current file system: 'ext4'
I:Can't probe device /dev/block/dm-0
I:Unable to mount '/data'
I:Actual block device: '/dev/block/dm-0', current file system: 'ext4'
MTP Enabled
I:Switching packages (TWRP)
I:Set page: 'mount'
created new mtpserver object
MtpServer::run fd: 13
I:Can't probe device /dev/block/dm-0
E:Unable to mount '/data'
I:Actual block device: '/dev/block/dm-0', current file system: 'ext4'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
@ciaby

This comment has been minimized.

Copy link

ciaby commented Jun 16, 2015

Btw, I can try test builds, and also donate some more money if that could in any way help :) I already donated 10$ for you hard work. Thanks again for TWRP!

@dtto

This comment has been minimized.

Copy link

dtto commented Jul 16, 2015

I have the same issue as @ciaby running latest TWRP (2.8.7.0) on my encrypted oneplus one.

@gavronehud

This comment has been minimized.

Copy link

gavronehud commented Aug 10, 2015

The MotoX (2013/Gen1) has an issue with TWRP up to 2.8.7.0 with decrypting the
data partition.

I'm on vacation and violated rule 1 (never upgrade software or firmware while
away from home). Backtracked and live, but damn I'm pissed.

Short story:
If you take a Motoral MotoX first-gen (2013) and upgrade it to Android 5.1.1
(I used Dirty Unicorns, but Moto is about to release theirs) then the /data
partition will no longer mount under TWRP.

I have two devices. I am willing to test. If you want to get this working,
let me know and I will happily help.

Best regards. You guys did great on the OPO. Knowing nothing, I suspect
this is even easier. If you disagree, please see the first two words of the
previous sentence.

having spent two hours in a hotel room to get my phone working I'm now going
to crash. Best regards to all.

Ehud Gavron

On 05/18/2015 09:04 AM, Ethan Yonker wrote:

@gavronehud https://github.com/gavronehud the automatic backup name is pulled from /system/build.prop. The TWRP build is
actually bacon-eng instead of bacon-userdebug so this issue is coming from the ROM that you have installed or perhaps a build.prop
edit that you made.


Reply to this email directly or view it on GitHub
#333 (comment).

@Dees-Troy

This comment has been minimized.

Copy link
Member

Dees-Troy commented Aug 10, 2015

First off, this thread is for bacon only. Secondly, I don't own or have access to any Moto X devices, so I won't be able to assist you on that device.

@raaomoka

This comment has been minimized.

Copy link

raaomoka commented Dec 22, 2015

Any progress on supporting cm-12.1-YOG4PAS3JL encryption?

@haha01haha01

This comment has been minimized.

Copy link

haha01haha01 commented Apr 22, 2016

Problem still exists with TWRP 3.0.2 and CM13

@Bapf

This comment has been minimized.

Copy link

Bapf commented Apr 22, 2016

@haha01haha01 on which device. It was fixed quite a while ago on bacon.

@Natanji

This comment has been minimized.

Copy link

Natanji commented Apr 22, 2016

It was fixed for CM 12.1, but their new bug report is about the newly released CM 13

Am 22.04.2016 13:33 schrieb Bapf notifications@github.com:

@haha01haha01 on which device. It was fixed quite a while ago on bacon.


You are receiving this because you commented.
Reply to this email directly or view it on GitHub

@Bapf

This comment has been minimized.

Copy link

Bapf commented Apr 22, 2016

@Natanji schouldn't the release not be irrelevant since the encryption on the OPO is hardware based?

@jfeise

This comment has been minimized.

Copy link

jfeise commented Apr 22, 2016

Decryption works fine for me with TWRP 3.0.2 and the latest CM13 nightlies.
TWRP 3.0.1 had issues, for all devices. But 3.0.0 and 3.0.2 work.

@haha01haha01

This comment has been minimized.

Copy link

haha01haha01 commented Apr 22, 2016

Doesn't work for me. I'm running TWRP 3.0.2-0 on my OnePlus One with CyanogenMod (not CyanogenOS) version 13.0 (ZNH0EAO2O0), both newly flashed today. When entering my decryption password, I get "Password failed, please try again!". I just double checked to make sure I'm entering the correct password. I'd open a new bug report, but I'm suspecting it has to do with the same issue.

@akorn

This comment has been minimized.

Copy link

akorn commented Apr 24, 2016

3.0.2-0 works for me, but only if I flash it to the device, not if I fastboot boot it.

@ghost

This comment has been minimized.

Copy link

ghost commented May 25, 2016

Same of @haha01haha01 with CM13 and OnePlus One.

Ok, this works: TWRP-3.0.2-0-bacon-with-decryption-cm13-AtAM1.img
https://www.androidfilehost.com/?fid=24521665358595401

@xpseudonym

This comment has been minimized.

Copy link

xpseudonym commented Jun 21, 2016

Ditto @hacklover with CM13 and OnePlus One.

But, can anyone tell me what the origin of TWRP-3.0.2-0-bacon-with-decryption-cm13-AtAM1.img is? Or, what's the change is to TWRP-3.0.2-0-bacon sans with-decryption-cm13-AtAM1?

Thx

@xpseudonym

This comment has been minimized.

Copy link

xpseudonym commented Jun 21, 2016

OK, TWRP-3.0.2-0-bacon-with-decryption-cm13-AtAM1.img works for me
But, what is it and where does it come from...?
And, why doesn't standard TWRP do it if AtAM1's does?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment