Skip to content
Athom Homey app repository for Thermo-Floor AS / Heatit devices (Z-wave)
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
.homeycompose Merge branch 'beta' May 30, 2019
assets
drivers
lib
locales
node_modules
.eslintrc.js
.homeyplugins.json Fix PLo value out of range Jan 4, 2019
LICENSE Master to SDK2 Sep 30, 2018
README.md Update default reporting interval May 30, 2019
app.js
app.json
package-lock.json Update homey-meshdriver to 1.2.32 Apr 6, 2019
package.json

README.md

Heatit Z-wave App

This app adds support for the Z-wave devices by Heatit controls.

Links:

Heatit app at Athom apps
Heatit Github repository

Devices supported:

Heatit Z-Wave thermostat (TF 021)

The Heatit Z-Wave thermostat is an electronic thermostat for flush mounting in a standard wall box for regulating electric floor heating. The thermostat has a built-in Z-Wave chip that can be connected to Home Automation systems like Homey.

The following triggers are supported:

  • Thermostat mode has changed
  • Thermostat mode has changed to
  • The temperature has changed
  • The target temperature has changed
  • Thermostat turned on / off

The following conditions are supported:

  • Thermostat is on / off

The following action cards are supported:

  • Set the temperature (of current thermostat mode)
  • Set the thermostat mode
  • Set the setpoint of a thermostat mode

Heatit Z-TRM2(fx) (TF 033 & TF 056)

The Heatit Z-TRM2 Z-Wave thermostat is an electronic thermostat for flush mounting in a standard wall box for regulating electric floor heating. The thermostat has a built-in Z-Wave chip that can be connected to Home Automation systems like Homey.

The following triggers are supported:

  • Thermostat mode has changed
  • Thermostat mode has changed to
  • The temperature has changed
  • The target temperature has changed
  • Thermostat turned on / off

The following conditions are supported:

  • Thermostat is on / off

The following action cards are supported:

  • Set the temperature (of current thermostat mode)
  • Set the thermostat mode
  • Set the setpoint of a thermostat mode

Heatit Z-Push button-2

The Heatit Z-Push Button 2 can control 1association group with up to 5 products or 4 scenarios through Homey.

The following triggers are supported:

  • Button Pressed 1x
  • Button held down
  • Button released
  • Any button pressed (including tokens)

In addition, by adding the NodeID in the corresponding association groups, the Z-Push Button 8 can directly control Z-wave switches / dimmers.

Heatit Z-Push button-8

The Heatit Z-Push Button 8 can control up to 4 separate association groups (onoff and dim) with up to 20 products or up to 16 scenes through Homey.

The following triggers are supported:

  • Button Pressed 1x
  • Button held down
  • Button released
  • Any button pressed (including tokens)

In addition, by adding the NodeID in the corresponding association groups, the Z-Push Button 8 can directly control Z-wave switches / dimmers.

Heatit Z-Water

The Heatit Z-Water is a DIN-rail regulator for controlling hydronic heating.

  • All 10 relays can be controlled independently

Heatit Z-DIN-616

The Heatit Z-DIN 616 is a 6 x 16A potential free relays for DIN rail mounting.

  • The 6 independent relay switches of the Heatit Z-DIN 616 can freely be controlled from the Z-Wave network and be used for many different purposes
  • The 6 digital inputs can be connected to dry contacts, e.g. limit switches, door/window contacts, or push-buttons.

Heatit Z-relay

The Heatit Z-Relay multipurpose relay module can be used for many different applications.

  • The relay has three inputs: analog or digital. You can use both analog and digital inputs, or a combination.
  • Heatit Z-Relay is a multipurpose product and can be used for the following applications: Boiler control / Leakage control / Temperature control / Outdoor applications

Supported Languages:

  • English
  • Dutch

Acknowledgements:

This app and driver development has been supported by:

  • The alpha release testers (much appreciated): P.R.Johansen, N.Peters, D.Bonsaksen and D.Janssen

  • Robbshop by providing a thermostat for debugging:

  • Heatit by providing the required devices / documentation:

Feedback:

Any requests please post them in the Heatit app topic on the Homey community Forum or contact me on Slack
If possible, please report issues at the issues section on Github otherwise in the above mentioned topic.

Donate:

If you like the app, consider a donation to support development
Paypal Donate

Changelog:

v2.2.1

  • Fix issue not being able to include the Heatit Z-push button 2 and Z-push button 8 devices
  • Z-TRM2(fx) changed default temperature- and meter-reporting interval from 60 to 900 seconds to prevent Z-wave network lock-up

v2.2.0

  • Add support for the Heatit Z-relay device
  • Add support for the Heatit Z-DIN-616 device
  • Update branding of the app

v2.1.2 (BETA)

  • Fix temperature reporting issues for Z-wave thermostat (FW 1.92), Z-TRM2(fx) and Z-Water (Homey SW 2.0.5+)
    Note: Please follow the steps mentioned below to fix the temperature reporting (only working as of Homey Software 2.0.5):
    • For already paired devices:
      1. Go to advanced settings, and replace (add if not existing) Homey's ID 1 with 1.1 in the following association groups used for the temperature reporting:
        * Z-wave thermostat (FW 1.92): Group 3, 4 and 5
        * Z-TRM2(fx): Group 2 and 3
        * Z-Water: Group 11, 12, 13 and 14
      2. For the thermostats, change in the Device specific settings (Sensor settings group), the 'Displayed temperature' to the sensor connected (default: floor sensor)
      3. Save settings
    • Alternative option is to remove and re-include the device based on the v2.1.2 version of the app
  • Add temperature changed flow cards for Z-wave thermostat (FW 1.92), Z-TRM2(fx) and Z-Water
  • Update to meshdriver v1.2.32

v2.1.1 (BETA)

  • Add support for the Z-Water regulator
  • Update to meshdriver v1.2.30
  • Note: due to an S2 issue within the Homey Z-wave core, the measured temperatures are not reported for the Z-wave thermostat (FW 1.92) and Z-TRM2(fx) thermostats as well as the Z-Water regulator. When this will be resolved, it is likely that the thermostat will need to be re-included

v2.1.0 (BETA)

  • Add support for the Z-wave thermostat (FW 1.92)
  • Add support for the Z-TRM2(fx) thermostat
  • Add all remaining settings for the thermostats
  • Add Power Regulator Mode action card for the Z-wave thermostat (use at own risk)
  • Note: due to an issue within the Homey Z-wave core, the measured temperatures are not reported for the Z-wave thermostat (FW 1.92) and the Z-TRM2(fx) thermostats. When this will be resolved, it is likely that the thermostat will need to be re-included

v2.0.3

  • Fix battery icon not visible on mobile interface for 1.5.13 (re-inclusion required to fix)
  • Remove not supported "Key Pressed 2 times" option from "A scene has been activated trigger card"
  • Add explicit not to settings to wake-up the Z-push before saving changes to the settings / association groups

v2.0.2

  • Add support for the Z-Push button 2 and Z-Push button 8 devices
  • Minor (cosmetical) modifications to make the app Homey SW v2.0.0 compatible

v2.0.1

  • Add thermostat onoff state trigger- and condition cards

v2.0.0

  • SDK2 rewrite of the ThermoFloor / Heatit app
  • SDK2 rewrite of the Multireg / Heatit Z-Wave thermostat device driver
  • Update to meshdriver v1.2.28

v1.0.0

  • App store ready update
  • Added 2 additional action cards ('change themostat mode' and 'change setpoint of specific thermostat mode')

v0.2.0

  • Code clean-up (MasterData array) and further bug fixes
  • Update of response time for MODE change from mobile card; setpoint will be updated based on stored values
  • Added en / nl locales
  • Added structure for 2 additional action cards ('change mode' and 'change setpoint of specific mode') (WIP)

v0.1.2

  • Update of setpoint parsing and updating the corresponding settings
  • Update of response time for MODE change; setpoint will be updated based on stored values

v0.1.0

  • Major update based on test results, setpoint optimization
  • Added functionality cooling mode, state icon in mobile card
  • removed settings that are read-only or not used
You can’t perform that action at this time.