Raspberry Pi Pico based LoRaWAN soil moisture sensor for plantmonitor project
Clone with Submodules:
git clone -b master --recurse-submodules -j8 https://github.com/ThomasLeister/plantmonitor-sensor.git
cp config.example.h config.h
(configure secrets and region in config.h)
Run Cmake init:
cmake ./
Run make:
make
(TBD)
Settings from config.h and context will be written to Flash and loaded from Flash at next reboot. This leads to the effect that changes in your config.h will not be accepted unless you clear the internal Flash / EEPROM.
The EEPROM section for settings can be erased by commenting out the lines
NvmDataMgmtFactoryReset();
EepromMcuFlush();
and starting up the Raspberry Pi Pico once. After that, the lines can be commented out, again.