Git of the Tronics Evaluation library for Arduino M0, M0 Pro, and Zero boards
Switch branches/tags
Nothing to show
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
AXO_ReadOutput
EvaluationTool
GYPRO_ReadOutput
EVB.cpp
EVB.h
README.md
keywords.txt
library.properties

README.md

Tronics Evaluation Kit Library 2.2

Tronics Microsystems Evaluation Board library for Arduino M0 and Yùn Rev2 boards with GYPRO® or AXO® MEMS Sensors.

alt tag

Arduino-Firmware

Arduino (M0 and Yùn models) Firmware for Tronic's Microsytems Evaluation Kit

Installation

  1. Connect the Arduino (M0 or Yùn) board to your computer using the USB cable and the Native USB Port. If this is the first time you are connecting an Arduino board to your computer, please wait a few minutes before going on, as Windows needs to install all the necessary drivers.

  2. Open Arduino IDE.

  3. Open the “Boards Manager” in the Tools > Board menu.

  4. If you use the Arduino M0 Board, Install latest version of "Arduino SAMD Boards (32-Bits ARM Cortex M0+)"

  5. Select “Arduino M0” or "Arduino Yùn" in the Tools > Board menu.

  6. Select the serial port number corresponding to the Arduino board in the Tools > Port menu. The name “Arduino M0” or "Arduino Yùn" should be associated with the correct COM port.

  7. Now, you need install Tronics EVB Library : Click on “Add .ZIP Library…” in the Sketch > Include Library menu.

  8. Select “TronicsEvaluationKit_Library” in the “Arduino Firmware & IDE” folder into the USB flash drive.

  9. Now, you can open “EvaluationTool” firmware” in the Examples menu.

  10. Upload the program: Simply click on the "Upload" button in the environment. Wait a few seconds, and you should see the RX and TX LEDs on the board flashing. If the upload is successful, the message "Done uploading." will appear in the status bar at the bottom of the window.

  11. Close Arduino IDE

NOW YOUR ARDUINO M0 BOARD IS PROGRAMMED AND READY TO BE USED WITH TRONICS EVALUATION TOOL.

Usage

This Firmware is optimised forEvaluation Tool 2.2 software.

History

28/09/2017 - Creation of the Tronic's Microsystems GitHub repository. 03/09/2018 - Update to have a compatiblity with the Arduino Yùn Rev 2 board