_ (` ). .---Host:-stardust--. .-----user@stardust--. ( ). | | | | _( '`. | veth_user_o >===internal===> veth_user | .=(`( Internet ) | 100.64.9.1 | | 100.64.9.2 | (( (..__.:'-' ===WAN===> eth0 | | lo | `( ) ) | 188.8.131.52 | | 127.0.0.1 | ` __.:' ) | | | | --' \-------------------/ \--||-----||-----||--/ || || || \/ \/ \/ . nodejs nginx gogs
As is common with hosting providers, your uberspace is outfitted with a more or less direct connection to the world wide web. It can be used to download all kinds of things like new software to install on it, or - as you'll probably do - to provide websites or services to yourself or others.
Receiving data from other servers onto your uberspace works just like it does
on any other linux machine. For example, a simple
does just what you'd expect:
[eliza@doolittle ~]$ curl https://uberspace.de <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta name="description" content="Uberspace.de ist deine Plattform für den Betrieb von Websites und Mail. Wir bieten ungewöhnlich viele Möglichkeiten, engagierte Unterstützung durch erfahrene Linux-Admins - und du suchst dir selbst aus, wieviel du dafür zahlst." /> (...)
These adresses (
fed75::xxx::2) aren't ordinary public ones,
but rather from the IPv6 ULA or IPv4 Carrier-grade NAT ranges. This is
because uberspaces are not directly connected to the internet, but are placed
within their own little network namespace, similarily to how docker handles
networking for its containers. This gives them their own
and funnily enough, their own loopback /
127.0.0.1. Connections to the
out are then NATed, direct, raw TCP or UDP connections from the internet are
supported on high ports. See :ref:`basics ports <firewallports>` to learn how to set this up.
Network namespaces are a feature of the linux kernel. In a normal setup there is just a single setup of network interfaces, firewall rules and routing tables. Network namespaces change that fundamental assumption. With network namespaces, a system can have multiple separate instances of network stacks that operate independent of each other. In our setup, all services and sessions for a uberspace are placed in their own namespace.
Placing each uberspace in their own networking world has a number of advantages:
- Your networking is seperated. Even when you run services that open ports, other users still cannot connect to them directly, as would be the case on a normal linux system.
- Traffic accounting. Since each user has their own network interface, standard tools can be used to find users causing high amounts of traffic, ensuring a safe and comfortable ride for everyone.
- Mapping of services. Since every user has their own
100.64.x.yIP address, user services can easily be reached via
100.64.x.y:63141. This enables us to provide cool features like :ref:`web backends <backends>`.
Sidequest: Pluggable authentication modules (PAM)
This section explains the technical implementation of network namespaces in our setup. If you only look for a higher-level understanding of the topic, you can safely skip to the next one.
To make sure our setup actually works, it is very important that all user sessions, processes and services are started within the right network namespace. There are many ways to modify the behavior of interactive sessions and a few to affect 3rd-party systemd services like :ref:`php-fpm <php>` or :ref:`supervisord`. Eventually we decided on a solution, which can handle both use cases in a single mechanism: a custom PAM module.
While there are lots of possible ways to execute code before or during an
interactive session (
ForceCommand, shell wrappers,
...), PAM is comparatively simple. Since all entrypoints like SSH or sudo
already support and use it by default, not a lot of trickery is required here:
[root@7399782766919198857 ~]# cat /etc/pam.d/sshd #%PAM-1.0 (...) # do not ever place root into a network namespace session [success=1 default=ignore] pam_succeed_if.so quiet uid eq 0 session required pam_python.so /lib64/security/pam_netns.py
We utilize pam_python to run our very own custom PAM module. It creates the needed namespace, interfaces and routes on demand and then places the session within the created namespace. All subsequently started processes simply inherit it.
Placing a generic systemd service into a network namespace is trickier. The nsenter command can execute a command and pace it into the desired namespace. There is just one catch: it needs to be executed as root. Since our services should run as the user they are for, things get tricky there. Even though its main use case is authentication, PAM can also help here:
[root@7399782766919198857 ~]# cat /etc/systemd/system/supervisord@.service [Unit] Description=Provides a supervisord instance for each user. (...) [Service] ExecStart=/usr/bin/supervisord -c $SUPERVISOR_CONFIG (...) User=%I PAMName=su-l
We provide a number of services so you don't have to do everything yourself:
nginx, MySQL, SSH, POP3, IMAP, SMTP and so on. Like any process, these services
can only be in one namespace at a time and that is most certainly not the one of
your uberspace. Sites running in php-fpm or daemons run with supervisord
therefore cannot connect to MySQL on
127.0.0.0.1:3306, because there is none
127.0.0.1. The services can be reached using
but that seems rather inconvenient.
Because we'd like to provide an easy-to-use setup, these services are proxied into every single namespace using a small Go tool based on googles tcpproxy library. Since this is all happening locally, it shouldn't behave differently than a direct connection. This setup also enables us to move some of those services off the uberspace hosts onto dedicated machines in the future.
Uberspace IP adresses
As you can see in the graphic all the way up this article, each user gets their
own, private IP address, like
100.64.9.2. They are the only way to contact
services running within a uberspace. While these IP adresses are stable, we
don't think that they're particularly pretty or easy to remember. Most of the
internet uses hostnames to remember IP adresses, so do we: each uberspace also
comes with a (locally reachable only) hostname:
This hostname isn't used by us in any way, but can be utilized to write
.htaccess proxies, in case web backends do not suffice.
Impact on users
While this architecture shouldn't restrict you in any way (ping us at firstname.lastname@example.org, if it does!), there a few things to watch out for:
- You have your own seperate
127.0.0.1. If you services listens on that, it is only reachable within your uberspace. If you want to make use of our :ref:`web backends <backends>`, be sure to listen on
- When using the "classic"
.htaccessmethod of providing your own web services via apache, using
127.0.0.1won't work for similar reasons. Please use web backends instead.
- Connections between uberspaces on the same host are not supported. You can use SSH port forwarding instead.
Other than these small caveats, networking on your uberspace should work like it does on any other machine: happy pinging!
Parts of the network namespace explaination are adapted from the article "Introducing Linux Network Namespaces" by Scott Lowe. Thank you!
The ASCII art cloud has been copied from asciiart.eu. The
artist goes by the name
a:f. Thank you!