Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Wrong number of top/bottom layers #140

Closed
illuminarti opened this issue Nov 17, 2014 · 1 comment

Comments

2 participants
@illuminarti
Copy link

commented Nov 17, 2014

There's some sort of off-by-one error that gives too many solid top and bottom layers on a print.

For instance, using Cura 14.09, if I have a 20mm high closed cylinder, and slice it with all the layers 0.1mm high, and ask for a top/bottom thickness of 1mm, I get 200 layers total, with 11 layers of solid on the bottom, and another 11 on the top, not ten solid layers on each end.

Also, if the first layer is thicker than the standard layer height the bottom thickness isn't adjusted. For instance if I ask for a 0.2mm first layer; the total number of layers in the print is reduced to 199 layers, from 200 - because the first layer is now 1 extra layer thick. However, I still get 11 bottom layers, making the solid bottom now 0.2 + (10 x 0.1) = 1.2mm thick.

@daid

This comment has been minimized.

Copy link
Member

commented Nov 24, 2014

Bug was in the GUI, but it's fixed now. Thanks.

kakaroto added a commit to alephobjects/Cura that referenced this issue Jan 15, 2015

foosel added a commit to foosel/OctoPrint that referenced this issue Jan 11, 2017

DeviousFusion pushed a commit to UTA-FabLab/OctoPuppet that referenced this issue Sep 12, 2017

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.