nccopy fails when source is 64-bit offset and you request a specific variable #425
Comments
WardF
added a commit
that referenced
this issue
Sep 1, 2017
netbsd-srcmastr
pushed a commit
to NetBSD/pkgsrc
that referenced
this issue
May 16, 2018
Upstream changes: ## 4.6.1 - March 15, 2018 * [Bug Fix] Corrected an issue which could result in a dap4 failure. See [Github #888](Unidata/netcdf-c#888) for more information. * [Bug Fix][Enhancement] Allow `nccopy` to control output filter suppresion. See [Github #894](Unidata/netcdf-c#894) for more information. * [Enhancement] Reverted some new behaviors that, while in line with the netCDF specification, broke existing workflows. See [Github #843](Unidata/netcdf-c#843) for more information. * [Bug Fix] Improved support for CRT builds with Visual Studio, improves zlib detection in hdf5 library. See [Github #853](Unidata/netcdf-c#853) for more information. * [Enhancement][Internal] Moved HDF4 into a distinct dispatch layer. See [Github #849](Unidata/netcdf-c#849) for more information. ## 4.6.0 - January 24, 2018 * [Enhancement] Full support for using HDF5 dynamic filters, both for reading and writing. See the file docs/filters.md. * [Enhancement] Added an option to enable strict null-byte padding for headers; this padding was specified in the spec but was not enforced. Enabling this option will allow you to check your files, as it will return an E_NULLPAD error. It is possible for these files to have been written by older versions of libnetcdf. There is no effective problem caused by this lack of null padding, so enabling these options is informational only. The options for `configure` and `cmake` are `--enable-strict-null-byte-header-padding` and `-DENABLE_STRICT_NULL_BYTE_HEADER_PADDING`, respectively. See [Github #657](Unidata/netcdf-c#657) for more information. * [Enhancement] Reverted behavior/handling of out-of-range attribute values to pre-4.5.0 default. See [Github #512](Unidata/netcdf-c#512) for more information. * [Bug] Fixed error in tst_parallel2.c. See [Github #545](Unidata/netcdf-c#545) for more information. * [Bug] Fixed handling of corrupt files + proper offset handling for hdf5 files. See [Github #552](Unidata/netcdf-c#552) for more information. * [Bug] Corrected a memory overflow in `tst_h_dimscales`, see [Github #511](Unidata/netcdf-c#511), [Github #505](Unidata/netcdf-c#505), [Github #363](Unidata/netcdf-c#363) and [Github #244](Unidata/netcdf-c#244) for more information. ## 4.5.0 - October 20, 2017 * Corrected an issue which could potential result in a hang while using parallel file I/O. See [Github #449](Unidata/netcdf-c#449) for more information. * Addressed an issue with `ncdump` not properly handling dates on a 366 day calendar. See [GitHub #359](Unidata/netcdf-c#359) for more information. ### 4.5.0-rc3 - September 29, 2017 * [Update] Due to ongoing issues, native CDF5 support has been disabled by **default**. You can use the options mentioned below (`--enable-cdf5` or `-DENABLE_CDF5=TRUE` for `configure` or `cmake`, respectively). Just be aware that for the time being, Reading/Writing CDF5 files on 32-bit platforms may result in unexpected behavior when using extremely large variables. For 32-bit platforms it is best to continue using `NC_FORMAT_64BIT_OFFSET`. * [Bug] Corrected an issue where older versions of curl might fail. See [GitHub #487](Unidata/netcdf-c#487) for more information. * [Enhancement] Added options to enable/disable `CDF5` support at configure time for autotools and cmake-based builds. The options are `--enable/disable-cdf5` and `ENABLE_CDF5`, respectively. See [Github #484](Unidata/netcdf-c#484) for more information. * [Bug Fix] Corrected an issue when subsetting a netcdf3 file via `nccopy -v/-V`. See [Github #425](Unidata/netcdf-c#425) and [Github #463](Unidata/netcdf-c#463) for more information. * [Bug Fix] Corrected `--has-dap` and `--has-dap4` output for cmake-based builds. See [GitHub #473](Unidata/netcdf-c#473) for more information. * [Bug Fix] Corrected an issue where `NC_64BIT_DATA` files were being read incorrectly by ncdump, despite the data having been written correctly. See [GitHub #457](Unidata/netcdf-c#457) for more information. * [Bug Fix] Corrected a potential stack buffer overflow. See [GitHub #450](Unidata/netcdf-c#450) for more information. ### 4.5.0-rc2 - August 7, 2017 * [Bug Fix] Addressed an issue with how cmake was implementing large file support on 32-bit systems. See [GitHub #385](Unidata/netcdf-c#385) for more information. * [Bug Fix] Addressed an issue where ncgen would not respect keyword case. See [GitHub #310](Unidata/netcdf-c#310) for more information. ### 4.5.0-rc1 - June 5, 2017 * [Enhancement] DAP4 is now included. Since dap2 is the default for urls, dap4 must be specified by (1) using "dap4:" as the url protocol, or (2) appending "#protocol=dap4" to the end of the url, or (3) appending "#dap4" to the end of the url Note that dap4 is enabled by default but remote-testing is disbled until the testserver situation is resolved. * [Enhancement] The remote testing server can now be specified with the `--with-testserver` option to ./configure. * [Enhancement] Modified netCDF4 to use ASCII for NC_CHAR. See [Github Pull request #316](Unidata/netcdf-c#316) for more information. * [Bug Fix] Corrected an error with how dimsizes might be read. See [Github #410](Unidata/netcdf-c#410) for more information. * [Bug Fix] Corrected an issue where 'make check' would fail if 'make' or 'make all' had not run first. See [Github #339](Unidata/netcdf-c#339) for more information. * [Bug Fix] Corrected an issue on Windows with Large file tests. See [Github #385](Unidata/netcdf-c#385]) for more information. * [Bug Fix] Corrected an issue with diskless file access, see [Pull Request #400](Unidata/netcdf-c#400) and [Pull Request #403](Unidata/netcdf-c#403) for more information. * [Upgrade] The bash based test scripts have been upgraded to use a common test_common.sh include file that isolates build specific information. * [Upgrade] The bash based test scripts have been upgraded to use a common test_common.sh include file that isolates build specific information. * [Refactor] the oc2 library is no longer independent of the main netcdf-c library. For example, it now uses ncuri, nclist, and ncbytes instead of its homegrown equivalents. * [Bug Fix] `NC_EGLOBAL` is now properly returned when attempting to set a global `_FillValue` attribute. See [GitHub #388](Unidata/netcdf-c#388) and [GitHub #389](Unidata/netcdf-c#389) for more information. * [Bug Fix] Corrected an issue where data loss would occur when `_FillValue` was mistakenly allowed to be redefined. See [Github #390](Unidata/netcdf-c#390), [GitHub #387](Unidata/netcdf-c#387) for more information. * [Upgrade][Bug] Corrected an issue regarding how "orphaned" DAS attributes were handled. See [GitHub #376](Unidata/netcdf-c#376) for more information. * [Upgrade] Update utf8proc.[ch] to use the version now maintained by the Julia Language project (https://github.com/JuliaLang/utf8proc/blob/master/LICENSE.md). * [Bug] Addressed conversion problem with Windows sscanf. This primarily affected some OPeNDAP URLs on Windows. See [GitHub #365](Unidata/netcdf-c#365) and [GitHub #366](Unidata/netcdf-c#366) for more information. * [Enhancement] Added support for HDF5 collective metadata operations when available. Patch submitted by Greg Sjaardema, see [Pull request #335](Unidata/netcdf-c#335) for more information. * [Bug] Addressed a potential type punning issue. See [GitHub #351](Unidata/netcdf-c#351) for more information. * [Bug] Addressed an issue where netCDF wouldn't build on Windows systems using MSVC 2012. See [GitHub #304](Unidata/netcdf-c#304) for more information. * [Bug] Fixed an issue related to potential type punning, see [GitHub #344](Unidata/netcdf-c#344) for more information. * [Enhancement] Incorporated an enhancement provided by Greg Sjaardema, which may improve read/write times for some complex files. Basically, linked lists were replaced in some locations where it was safe to use an array/table. See [Pull request #328](Unidata/netcdf-c#328) for more information.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I observe the following when trying to create a subset of a particular file (the source file is a netcdf-3 64-bit offset):
What Fails
What Works
Convert the file to netCDF-4 classic, then subset works
The text was updated successfully, but these errors were encountered: