diff --git a/experiment-setup/background_processes/processes_memory_usage.txt b/experiment-setup/background_processes/processes_memory_usage.txt new file mode 100644 index 00000000..5726cebf --- /dev/null +++ b/experiment-setup/background_processes/processes_memory_usage.txt @@ -0,0 +1,126 @@ +Mem: 1506520K used, 6626020K free, 1197960K shrd, 4572K buff, 1347332K cached +CPU: 0% usr 0% sys 0% nic 100% idle 0% io 0% irq 0% sirq +Load average: 0.00 0.00 0.00 1/148 4442 + PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND + 3030 3029 root S 1267m 15% 3 0% /usr/bin/dockerd + 3048 3030 root S 1253m 15% 3 0% containerd --config /var/run/docker/containerd/containerd.toml + 2727 2726 root S 9392 0% 3 0% /sbin/wpa_supplicant -i wlan0 -c/etc/wpa_supplicant/wpa_supplicant.conf + 2884 1 chrony S 8608 0% 2 0% /usr/sbin/chronyd -f /etc/chrony/chrony.conf + 4430 4428 root S 6736 0% 3 0% sshd-session: root@pts/0 + 4428 2946 root S 6424 0% 3 0% sshd-session: root [priv] + 2946 1 root S 5884 0% 2 0% sshd: /usr/sbin/sshd [listener] 0 of 10-100 startups + 3033 3030 root S 3560 0% 0 0% log_proxy -m /var/log/docker.log + 3032 3030 root S 3560 0% 2 0% log_proxy -m /var/log/docker.log + 2975 2953 root S 1824 0% 0 0% -sh + 4431 4430 root S 1792 0% 0 0% -sh + 4442 4431 root R 1724 0% 1 0% top -b -n 1 + 2698 1 root S 1724 0% 1 0% /sbin/syslogd -t -n + 2910 1 root S 1712 0% 1 0% /usr/sbin/crond -c /etc/crontabs -f + 1 0 root S 1708 0% 3 0% /sbin/init + 2953 1 root S 1708 0% 3 0% /bin/login -- root + 2970 1 root S 1708 0% 2 0% /sbin/getty 38400 tty6 + 2966 1 root S 1708 0% 0 0% /sbin/getty 38400 tty5 + 2973 1 root S 1708 0% 2 0% /sbin/getty -L 0 ttyAMA10 vt100 + 2954 1 root S 1708 0% 3 0% /sbin/getty 38400 tty2 + 2961 1 root S 1708 0% 3 0% /sbin/getty 38400 tty4 + 2958 1 root S 1708 0% 3 0% /sbin/getty 38400 tty3 + 2855 1 root S 1704 0% 2 0% /sbin/acpid -f + 3029 1 root S 1268 0% 2 0% supervise-daemon docker --start --retry TERM/60/KILL/10 --stdout-logger log_proxy -m /var/log/docker.log --stderr-logger log_proxy -m /var/log/docker.log --respawn-delay 2 --respawn-max 5 --respawn-period 1800 /usr/bin/dockerd -- + 2726 1 root S 1268 0% 3 0% supervise-daemon wpa_supplicant --start --respawn-delay 2 --respawn-max 5 --respawn-period 1800 /sbin/wpa_supplicant -- -i wlan0 -c/etc/wpa_supplicant/wpa_supplicant.conf + 16 2 root IW 0 0% 2 0% [rcu_preempt] + 4422 2 root IW 0 0% 0 0% [kworker/0:0-eve] + 3573 2 root IW 0 0% 2 0% [kworker/2:3-eve] + 40 2 root IW 0 0% 2 0% [kworker/u9:1-ev] + 4423 2 root IW 0 0% 0 0% [kworker/0:2-eve] + 46 2 root SW 0 0% 0 0% [kcompactd0] + 4416 2 root IW 0 0% 3 0% [kworker/3:2-mm_] + 408 2 root DW 0 0% 3 0% [sugov:0] + 4418 2 root IW 0 0% 3 0% [kworker/3:1-eve] + 15 2 root SW 0 0% 0 0% [ksoftirqd/0] + 3806 2 root IW 0 0% 1 0% [kworker/1:2-cgr] + 26 2 root SW 0 0% 2 0% [ksoftirqd/2] + 21 2 root SW 0 0% 1 0% [ksoftirqd/1] + 31 2 root SW 0 0% 3 0% [ksoftirqd/3] + 828 2 root IW< 0 0% 3 0% [kworker/u13:0-h] + 112 2 root IW 0 0% 2 0% [kworker/u11:1-e] + 959 2 root IW< 0 0% 0 0% [kworker/0:1H-kb] + 3911 2 root IW 0 0% 2 0% [kworker/u10:2-e] + 3257 2 root IW 0 0% 3 0% [kworker/u10:0-e] + 4364 2 root IW 0 0% 1 0% [kworker/1:1-eve] + 199 2 root SW 0 0% 1 0% [hwrng] + 281 2 root IW< 0 0% 3 0% [kworker/R-nvme-] + 283 2 root IW< 0 0% 2 0% [kworker/R-nvme-] + 284 2 root IW< 0 0% 3 0% [kworker/R-nvme-] + 81 2 root IW< 0 0% 2 0% [kworker/R-kthro] + 78 2 root IW< 0 0% 2 0% [kworker/R-nfsio] + 271 2 root IW< 0 0% 0 0% [kworker/R-iscsi] + 378 2 root IW< 0 0% 0 0% [kworker/R-uas] + 440 2 root IW< 0 0% 2 0% [kworker/2:1H-kb] + 829 2 root IW< 0 0% 2 0% [kworker/u14:0] + 288 2 root IW< 0 0% 3 0% [kworker/R-DWC N] + 831 2 root IW< 0 0% 2 0% [kworker/u16:0] + 832 2 root IW< 0 0% 0 0% [kworker/u17:0] + 845 2 root SW 0 0% 0 0% [irq/37-aerdrv] + 881 2 root IW 0 0% 3 0% [kworker/u12:5-e] + 931 2 root IW< 0 0% 1 0% [kworker/R-sdhci] + 939 2 root IW< 0 0% 1 0% [kworker/R-sdhci] + 940 2 root SW 0 0% 0 0% [irq/160-mmc0] + 941 2 root SW 0 0% 0 0% [irq/161-mmc1] + 956 2 root IW< 0 0% 1 0% [kworker/R-mmc_c] + 830 2 root IW< 0 0% 0 0% [kworker/u15:0] + 54 2 root IW< 0 0% 1 0% [kworker/1:1H-kb] + 49 2 root IW< 0 0% 2 0% [kworker/R-blkcg] + 48 2 root IW< 0 0% 3 0% [kworker/R-kbloc] + 51 2 root SW 0 0% 1 0% [watchdogd] + 55 2 root IW< 0 0% 3 0% [kworker/R-rpcio] + 45 2 root IW< 0 0% 3 0% [kworker/R-write] + 44 2 root SW 0 0% 3 0% [oom_reaper] + 41 2 root SW 0 0% 1 0% [kauditd] + 39 2 root IW< 0 0% 3 0% [kworker/R-inet_] + 38 2 root SW 0 0% 2 0% [kdevtmpfs] + 43 2 root SW 0 0% 2 0% [khungtaskd] + 47 2 root IW< 0 0% 2 0% [kworker/R-kinte] + 56 2 root IW< 0 0% 3 0% [kworker/R-xprti] + 25 2 root SW 0 0% 2 0% [migration/2] + 29 2 root SW 0 0% 3 0% [cpuhp/3] + 23 2 root IW< 0 0% 1 0% [kworker/1:0H-ev] + 20 2 root SW 0 0% 1 0% [migration/1] + 19 2 root SW 0 0% 1 0% [cpuhp/1] + 24 2 root SW 0 0% 2 0% [cpuhp/2] + 30 2 root SW 0 0% 3 0% [migration/3] + 14 2 root IW 0 0% 0 0% [rcu_tasks_trace] + 13 2 root IW 0 0% 0 0% [rcu_tasks_kthre] + 17 2 root SW 0 0% 0 0% [migration/0] + 7 2 root IW< 0 0% 0 0% [kworker/R-netns] + 6 2 root IW< 0 0% 0 0% [kworker/R-slub_] + 2409 2 root IW< 0 0% 2 0% [kworker/R-ipv6_] + 2358 2 root SW 0 0% 3 0% [brcmf_wdog/mmc1] + 2357 2 root IW< 0 0% 1 0% [kworker/R-brcmf] + 2408 2 root IW< 0 0% 3 0% [kworker/R-mld] + 2256 2 root SW 0 0% 0 0% [irq/162-1000800] + 2246 2 root IW< 0 0% 0 0% [kworker/u13:2-h] + 2330 2 root SW 0 0% 2 0% [spi10] + 1691 2 root IW< 0 0% 3 0% [kworker/3:2H] + 1640 2 root SW 0 0% 0 0% [jbd2/mmcblk0p2-] + 1564 2 root IW< 0 0% 2 0% [kworker/2:2H] + 1641 2 root IW< 0 0% 2 0% [kworker/R-ext4-] + 1709 2 root IW< 0 0% 0 0% [kworker/0:2H] + 2351 2 root IW< 0 0% 1 0% [kworker/R-cfg80] + 3635 2 root IW 0 0% 0 0% [kworker/u9:0-ev] + 3393 2 root IW 0 0% 1 0% [kworker/u10:1-e] + 3585 2 root IW 0 0% 1 0% [kworker/u8:1-ex] + 3975 2 root IW 0 0% 1 0% [kworker/u11:0] + 11 2 root IW 0 0% 1 0% [kworker/u8:0] + 4 2 root IW< 0 0% 0 0% [kworker/R-rcu_g] + 2 0 root SW 0 0% 1 0% [kthreadd] + 3 2 root SW 0 0% 0 0% [pool_workqueue_] + 5 2 root IW< 0 0% 0 0% [kworker/R-rcu_p] + 12 2 root IW< 0 0% 0 0% [kworker/R-mm_pe] + 18 2 root SW 0 0% 0 0% [cpuhp/0] + 71 2 root SW 0 0% 0 0% [kswapd0] + 1075 2 root IW< 0 0% 3 0% [kworker/3:1H-kb] + 4126 2 root IW 0 0% 2 0% [kworker/u9:2-ev] + 4358 2 root IW 0 0% 3 0% [kworker/u12:0-e] + 4327 2 root IW 0 0% 2 0% [kworker/2:1-eve] + 4436 2 root IW 0 0% 0 0% [kworker/0:1-eve] + diff --git a/experiment-setup/execution/execution.py b/experiment-setup/execution/execution.py index e9ecbe21..6ceb25c8 100644 --- a/experiment-setup/execution/execution.py +++ b/experiment-setup/execution/execution.py @@ -3,6 +3,7 @@ import sys from datetime import datetime from pathlib import Path +import time import pandas @@ -21,9 +22,14 @@ BASE_COMPOSE_FILES_LOCATION = '/media/mmcblk0p2/setup/compose_files/' COOLDOWN = 30 -SERVICES = {"rust-actix": BASE_COMPOSE_FILES_LOCATION + 'rust-actix-compose-prod.yml', - "python-flask": BASE_COMPOSE_FILES_LOCATION + 'python-flask-compose-prod.yml', - "go-gorilla": BASE_COMPOSE_FILES_LOCATION + 'go-gorilla-compose-prod.yml' +SERVICES = { + "rust-actix": BASE_COMPOSE_FILES_LOCATION + 'rust-actix-compose-prod.yml', + #"c-sharp-razor": BASE_COMPOSE_FILES_LOCATION + 'c-sharp-razor-compose-prod.yml', + #"python-flask": BASE_COMPOSE_FILES_LOCATION + 'python-flask-compose-prod.yml', + # "go-gorilla": BASE_COMPOSE_FILES_LOCATION + 'go-gorilla-compose-prod.yml', + # "go-gin": BASE_COMPOSE_FILES_LOCATION + 'go-gin-compose-prod.yml' + #"ruby-sinatra": BASE_COMPOSE_FILES_LOCATION + 'ruby-sinatra-compose-prod.yml' + #"javascript-express": BASE_COMPOSE_FILES_LOCATION + 'javascript-express-compose-prod.yml' } @@ -100,6 +106,7 @@ async def main(run_mode, out_path, iterations): filepath ) if service_started: + time.sleep(5) await execute_experiment(otii_project, device, out_path, service, run_mode, iterations) await manage_server_docker_service(ssh_target, "", True) @@ -107,4 +114,4 @@ async def main(run_mode, out_path, iterations): if __name__ == "__main__": run_mode = str(Path(sys.argv[1])) if len(sys.argv) > 1 else "berries" out_path = Path(sys.argv[2]) if len(sys.argv) > 2 else Path("data/out") - asyncio.run(main(run_mode, out_path, 10)) + asyncio.run(main(run_mode, out_path, 30)) diff --git a/experiment-setup/execution/host_sequence/scenario_api.py b/experiment-setup/execution/host_sequence/scenario_api.py index d04a4123..93a20bab 100644 --- a/experiment-setup/execution/host_sequence/scenario_api.py +++ b/experiment-setup/execution/host_sequence/scenario_api.py @@ -7,7 +7,7 @@ BASE_URL = "http://10.7.7.144:5000/api" AUTH_HEADER = {"Authorization": "Basic c2ltdWxhdG9yOnN1cGVyX3NhZmUh"} BASE_DELAY = 1.8 -ITER_NUM = 20 # iteration number for each endpoint call has to be <= 400 +ITER_NUM = 200 # iteration number for each endpoint call has to be <= 400 user_sessions = {} api_latest_query = {"latest": 1} diff --git a/experiment-setup/execution/upload_folder_to_s3/how-to-run.md b/experiment-setup/execution/upload_folder_to_s3/how-to-run.md index c56394ff..adb42957 100644 --- a/experiment-setup/execution/upload_folder_to_s3/how-to-run.md +++ b/experiment-setup/execution/upload_folder_to_s3/how-to-run.md @@ -43,13 +43,13 @@ The script accepts the following arguments: Upload a folder /my/local/folder to the S3 bucket my-bucket: ```bash -python3 upload_folder_to_s3.py my-bucket /my/local/folder + python3 upload_folder_to_s3.py waectbucket ../-local-destination --prefix /s3-destination ```` Upload the same folder to the data/ prefix in the bucket: ```bash -python3 upload_folder_to_s3.py my-bucket /my/local/folder --prefix data + python3 upload_folder_to_s3.py waectbucket ../data/out/python-flask --prefix data/out/python-flask ``` This will upload files to S3 in the following structure: diff --git a/experiment-setup/kernel_logs/go-gin/go-gin-kernel-logs.txt b/experiment-setup/kernel_logs/go-gin/go-gin-kernel-logs.txt new file mode 100644 index 00000000..2809551a --- /dev/null +++ b/experiment-setup/kernel_logs/go-gin/go-gin-kernel-logs.txt @@ -0,0 +1,418 @@ +[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] +[ 0.000000] Linux version 6.6.49-0-rpi (buildozer@build-3-20-aarch64) (gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #1-Alpine SMP PREEMPT Thu Sep 5 10:58:11 UTC 2024 +[ 0.000000] KASLR enabled +[ 0.000000] random: crng init done +[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 +[ 0.000000] efi: UEFI not found. +[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000001c00000, size 64 MiB +[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool +[ 0.000000] OF: reserved mem: 0x0000000001c00000..0x0000000005bfffff (65536 KiB) map reusable linux,cma +[ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0 +[ 0.000000] OF: reserved mem: 0x000000003fd16200..0x000000003fd16237 (0 KiB) nomap non-reusable nvram@0 +[ 0.000000] Zone ranges: +[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] +[ 0.000000] DMA32 empty +[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] +[ 0.000000] Movable zone start for each node +[ 0.000000] Early memory node ranges +[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] +[ 0.000000] node 0: [mem 0x0000000000080000-0x000000003f7fffff] +[ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff] +[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] +[ 0.000000] On node 0, zone DMA: 2048 pages in unavailable ranges +[ 0.000000] psci: probing for conduit method from DT. +[ 0.000000] psci: PSCIv1.1 detected in firmware. +[ 0.000000] psci: Using standard PSCI v0.2 function IDs +[ 0.000000] psci: MIGRATE_INFO_TYPE not supported. +[ 0.000000] psci: SMC Calling Convention v1.2 +[ 0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880 +[ 0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096 +[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 +[ 0.000000] Detected PIPT I-cache on CPU0 +[ 0.000000] CPU features: detected: Virtualization Host Extensions +[ 0.000000] CPU features: detected: Hardware dirty bit management +[ 0.000000] CPU features: detected: Spectre-v4 +[ 0.000000] CPU features: detected: Spectre-BHB +[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR +[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) +[ 0.000000] CPU features: detected: SSBS not fully self-synchronizing +[ 0.000000] alternatives: applying boot alternatives +[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=2C:CF:67:8A:43:1D vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 modules=loop,squashfs,sd-mod,usb-storage quiet console=tty1 +[ 0.000000] Unknown kernel command line parameters "modules=loop,squashfs,sd-mod,usb-storage", will be passed to user space. +[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) +[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) +[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2062336 +[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off +[ 0.000000] software IO TLB: area num 4. +[ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB) +[ 0.000000] Memory: 8057156K/8380416K available (12608K kernel code, 2208K rwdata, 4252K rodata, 3456K init, 1073K bss, 257724K reserved, 65536K cma-reserved) +[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 +[ 0.000000] trace event string verifier disabled +[ 0.000000] rcu: Preemptible hierarchical RCU implementation. +[ 0.000000] rcu: RCU event tracing is enabled. +[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. +[ 0.000000] Trampoline variant of Tasks RCU enabled. +[ 0.000000] Tracing variant of Tasks RCU enabled. +[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. +[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 +[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 +[ 0.000000] Root IRQ handler: gic_handle_irq +[ 0.000000] GIC: Using split EOI/Deactivate mode +[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. +[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). +[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns +[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns +[ 0.000228] Console: colour dummy device 80x25 +[ 0.000234] printk: console [tty1] enabled +[ 0.000276] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) +[ 0.000282] pid_max: default: 32768 minimum: 301 +[ 0.000370] LSM: initializing lsm=capability,integrity +[ 0.000476] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) +[ 0.000516] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) +[ 0.001011] cgroup: Disabling memory control group subsystem +[ 0.001710] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. +[ 0.001761] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. +[ 0.001861] rcu: Hierarchical SRCU implementation. +[ 0.001863] rcu: Max phase no-delay instances is 1000. +[ 0.002718] EFI services will not be available. +[ 0.002828] smp: Bringing up secondary CPUs ... +[ 0.003073] Detected PIPT I-cache on CPU1 +[ 0.003123] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] +[ 0.003370] Detected PIPT I-cache on CPU2 +[ 0.003417] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] +[ 0.003668] Detected PIPT I-cache on CPU3 +[ 0.003710] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] +[ 0.003747] smp: Brought up 1 node, 4 CPUs +[ 0.003753] SMP: Total of 4 processors activated. +[ 0.003757] CPU features: detected: 32-bit EL0 Support +[ 0.003760] CPU features: detected: Data cache clean to the PoU not required for I/D coherence +[ 0.003763] CPU features: detected: Common not Private translations +[ 0.003765] CPU features: detected: CRC32 instructions +[ 0.003768] CPU features: detected: RCpc load-acquire (LDAPR) +[ 0.003770] CPU features: detected: LSE atomic instructions +[ 0.003773] CPU features: detected: Privileged Access Never +[ 0.003775] CPU features: detected: RAS Extension Support +[ 0.003779] CPU features: detected: Speculative Store Bypassing Safe (SSBS) +[ 0.003823] CPU: All CPU(s) started at EL2 +[ 0.003825] alternatives: applying system-wide alternatives +[ 0.006082] devtmpfs: initialized +[ 0.010622] Enabled cp15_barrier support +[ 0.010631] Enabled setend support +[ 0.010692] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns +[ 0.010700] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) +[ 0.011462] pinctrl core: initialized pinctrl subsystem +[ 0.011632] DMI not present or invalid. +[ 0.011832] NET: Registered PF_NETLINK/PF_ROUTE protocol family +[ 0.012415] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations +[ 0.012502] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations +[ 0.012630] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations +[ 0.012672] audit: initializing netlink subsys (disabled) +[ 0.012737] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1 +[ 0.012921] thermal_sys: Registered thermal governor 'step_wise' +[ 0.012936] cpuidle: using governor menu +[ 0.012999] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. +[ 0.013037] ASID allocator initialised with 32768 entries +[ 0.013475] Serial: AMBA PL011 UART driver +[ 0.014636] bcm2835-mbox 107c013880.mailbox: mailbox enabled +[ 0.014926] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2 +[ 0.021460] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-06-05T15:41:49, variant start_cd +[ 0.025457] raspberrypi-firmware soc:firmware: Firmware hash is 6fe0b09100000000000000000000000000000000 +[ 0.032836] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL +[ 0.032839] Modules: 0 pages in range for non-PLT usage +[ 0.032841] Modules: 518336 pages in range for PLT usage +[ 0.035729] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 +[ 0.036259] iommu: Default domain type: Translated +[ 0.036263] iommu: DMA domain TLB invalidation policy: strict mode +[ 0.036393] SCSI subsystem initialized +[ 0.036451] usbcore: registered new interface driver usbfs +[ 0.036464] usbcore: registered new interface driver hub +[ 0.036478] usbcore: registered new device driver usb +[ 0.036594] pps_core: LinuxPPS API ver. 1 registered +[ 0.036596] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti +[ 0.036602] PTP clock support registered +[ 0.036996] vgaarb: loaded +[ 0.037454] clocksource: Switched to clocksource arch_sys_counter +[ 0.470998] VFS: Disk quotas dquot_6.6.0 +[ 0.471018] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) +[ 0.471058] FS-Cache: Loaded +[ 0.471120] CacheFiles: Loaded +[ 0.473492] NET: Registered PF_INET protocol family +[ 0.473734] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) +[ 0.477283] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) +[ 0.477338] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) +[ 0.477347] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) +[ 0.477767] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) +[ 0.479488] TCP: Hash tables configured (established 65536 bind 65536) +[ 0.479662] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) +[ 0.479785] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) +[ 0.479933] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) +[ 0.480139] NET: Registered PF_UNIX/PF_LOCAL protocol family +[ 0.480368] RPC: Registered named UNIX socket transport module. +[ 0.480371] RPC: Registered udp transport module. +[ 0.480373] RPC: Registered tcp transport module. +[ 0.480375] RPC: Registered tcp-with-tls transport module. +[ 0.480377] RPC: Registered tcp NFSv4.1 backchannel transport module. +[ 0.480384] PCI: CLS 0 bytes, default 64 +[ 0.480554] Trying to unpack rootfs image as initramfs... +[ 0.485545] kvm [1]: IPA Size Limit: 40 bits +[ 0.485586] kvm [1]: vgic interrupt IRQ9 +[ 0.485614] kvm [1]: VHE mode initialized successfully +[ 0.486215] Initialise system trusted keyrings +[ 0.486700] workingset: timestamp_bits=46 max_order=21 bucket_order=0 +[ 0.486723] zbud: loaded +[ 0.487127] NFS: Registering the id_resolver key type +[ 0.487136] Key type id_resolver registered +[ 0.487139] Key type id_legacy registered +[ 0.487148] nfs4filelayout_init: NFSv4 File Layout Driver Registering... +[ 0.487151] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... +[ 0.487429] Key type asymmetric registered +[ 0.487433] Asymmetric key parser 'x509' registered +[ 0.487484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) +[ 0.487537] io scheduler mq-deadline registered +[ 0.487540] io scheduler kyber registered +[ 0.487559] io scheduler bfq registered +[ 0.487938] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 26) +[ 0.488069] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 27) +[ 0.488172] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 28) +[ 0.488273] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 29) +[ 0.491895] bcm2708_fb soc:fb: FB found 1 display(s) +[ 0.499086] Console: switching to colour frame buffer device 240x67 +[ 0.503279] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080 +[ 0.535399] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled +[ 0.536584] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 32, base_baud = 6000000) is a Broadcom BCM7271 UART +[ 0.536675] serial serial0: tty port ttyS0 registered +[ 0.537637] iproc-rng200 107d208000.rng: hwrng registered +[ 0.537834] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) +[ 0.538350] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe +[ 0.542878] brd: module loaded +[ 0.545715] loop: module loaded +[ 0.545941] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver +[ 0.546436] Loading iSCSI transport class v2.0-870. +[ 0.548399] usbcore: registered new device driver r8152-cfgselector +[ 0.548415] usbcore: registered new interface driver r8152 +[ 0.548428] usbcore: registered new interface driver lan78xx +[ 0.548440] usbcore: registered new interface driver smsc95xx +[ 0.548517] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) +[ 0.548551] dwc_otg: FIQ enabled +[ 0.548553] dwc_otg: NAK holdoff enabled +[ 0.548556] dwc_otg: FIQ split-transaction FSM enabled +[ 0.548559] Module dwc_common_port init +[ 0.551335] usbcore: registered new interface driver uas +[ 0.551354] usbcore: registered new interface driver usb-storage +[ 0.551763] mousedev: PS/2 mouse device common for all mice +[ 0.559767] rpi-rtc soc:rpi_rtc: registered as rtc0 +[ 0.561212] rpi-rtc soc:rpi_rtc: setting system clock to 1970-01-01T00:00:08 UTC (8) +[ 0.562179] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! +[ 0.562185] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer +[ 0.565143] sdhci: Secure Digital Host Controller Interface driver +[ 0.565147] sdhci: Copyright(c) Pierre Ossman +[ 0.565244] sdhci-pltfm: SDHCI platform and OF driver helper +[ 0.566541] ledtrig-cpu: registered to indicate activity on CPUs +[ 0.566718] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... +[ 0.566748] hid: raw HID events driver (C) Jiri Kosina +[ 0.566794] usbcore: registered new interface driver usbhid +[ 0.566797] usbhid: USB HID core driver +[ 0.567480] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available +[ 0.568097] Key type dns_resolver registered +[ 0.586273] registered taskstats version 1 +[ 0.586374] Loading compiled-in X.509 certificates +[ 0.590364] Key type .fscrypt registered +[ 0.590369] Key type fscrypt-provisioning registered +[ 0.591944] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: +[ 0.591956] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] +[ 0.591972] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 +[ 0.591982] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 +[ 0.591995] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 +[ 0.592002] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 +[ 0.597186] brcm-pcie 1000120000.pcie: Forcing gen 2 +[ 0.597502] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00 +[ 0.597509] pci_bus 0000:00: root bus resource [bus 00-ff] +[ 0.597516] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) +[ 0.597521] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) +[ 0.597540] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400 +[ 0.597575] pci 0000:00:00.0: PME# supported from D0 D3hot +[ 0.598896] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring +[ 0.674876] Freeing initrd memory: 6392K +[ 0.709468] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) +[ 0.709503] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000 +[ 0.709521] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff] +[ 0.709532] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff] +[ 0.709540] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff] +[ 0.709622] pci 0000:01:00.0: supports D1 +[ 0.709625] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold +[ 0.721468] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 +[ 0.721483] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff] +[ 0.721490] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff] +[ 0.721496] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff] +[ 0.721503] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff] +[ 0.721509] pci 0000:00:00.0: PCI bridge to [bus 01] +[ 0.721513] pci 0000:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] +[ 0.721520] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 +[ 0.721531] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 +[ 0.721650] pcieport 0000:00:00.0: enabling device (0000 -> 0002) +[ 0.721709] pcieport 0000:00:00.0: PME: Signaling with IRQ 37 +[ 0.721910] pcieport 0000:00:00.0: AER: enabled with IRQ 37 +[ 0.722047] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 +[ 0.722053] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 +[ 0.722064] rp1 0000:01:00.0: enabling device (0000 -> 0002) +[ 0.723321] rp1 0000:01:00.0: chip_id 0x20001927 +[ 0.729422] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 99 +[ 0.754238] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 105 (2c:cf:67:8a:43:1d) +[ 0.755694] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels +[ 0.756078] xhci-hcd xhci-hcd.0: xHCI Host Controller +[ 0.756087] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 +[ 0.756562] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 +[ 0.756580] xhci-hcd xhci-hcd.0: irq 130, io mem 0x1f00200000 +[ 0.756669] xhci-hcd xhci-hcd.0: xHCI Host Controller +[ 0.756673] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 +[ 0.756678] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed +[ 0.757051] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 +[ 0.757058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.757062] usb usb1: Product: xHCI Host Controller +[ 0.757065] usb usb1: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.757068] usb usb1: SerialNumber: xhci-hcd.0 +[ 0.757288] hub 1-0:1.0: USB hub found +[ 0.757322] hub 1-0:1.0: 2 ports detected +[ 0.757611] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 +[ 0.757617] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.757621] usb usb2: Product: xHCI Host Controller +[ 0.757624] usb usb2: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.757627] usb usb2: SerialNumber: xhci-hcd.0 +[ 0.757776] hub 2-0:1.0: USB hub found +[ 0.757838] hub 2-0:1.0: 1 port detected +[ 0.758316] xhci-hcd xhci-hcd.1: xHCI Host Controller +[ 0.758324] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 +[ 0.758790] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 +[ 0.758808] xhci-hcd xhci-hcd.1: irq 135, io mem 0x1f00300000 +[ 0.758897] xhci-hcd xhci-hcd.1: xHCI Host Controller +[ 0.758902] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 +[ 0.758906] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed +[ 0.759140] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 +[ 0.759145] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.759149] usb usb3: Product: xHCI Host Controller +[ 0.759152] usb usb3: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.759155] usb usb3: SerialNumber: xhci-hcd.1 +[ 0.759342] hub 3-0:1.0: USB hub found +[ 0.759384] hub 3-0:1.0: 2 ports detected +[ 0.759623] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 +[ 0.759628] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.759632] usb usb4: Product: xHCI Host Controller +[ 0.759635] usb usb4: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.759638] usb usb4: SerialNumber: xhci-hcd.1 +[ 0.759816] hub 4-0:1.0: USB hub found +[ 0.759852] hub 4-0:1.0: 1 port detected +[ 0.760966] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.761402] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu +[ 0.761409] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu +[ 0.761415] platform 1000800000.codec: Adding to iommu group 0 +[ 0.761429] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu +[ 0.761435] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu +[ 0.761441] platform 1000880000.pisp_be: Adding to iommu group 0 +[ 0.761488] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu +[ 0.761492] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu +[ 0.761499] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success +[ 0.762064] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.762491] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success +[ 0.763156] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.763586] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success +[ 0.764881] of_cfs_init +[ 0.764915] of_cfs_init: OK +[ 0.765058] clk: Disabling unused clocks +[ 0.765447] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO +[ 0.774701] mmc0: CQHCI version 5.10 +[ 0.774764] mmc1: CQHCI version 5.10 +[ 0.809470] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit +[ 0.902847] mmc0: new ultra high speed SDR104 SDHC card at address 59b4 +[ 0.903150] mmcblk0: mmc0:59b4 LX32G 29.5 GiB +[ 0.904401] mmcblk0: p1 p2 +[ 0.904597] mmcblk0: mmc0:59b4 LX32G 29.5 GiB +[ 0.964010] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit +[ 0.966238] Freeing unused kernel memory: 3456K +[ 0.966316] Run /init as init process +[ 0.966318] with arguments: +[ 0.966320] /init +[ 0.966321] with environment: +[ 0.966323] HOME=/ +[ 0.966325] TERM=linux +[ 0.966326] modules=loop,squashfs,sd-mod,usb-storage +[ 0.982337] Alpine Init 3.10.1-r0 +[ 0.983421] Loading boot drivers... +[ 0.988105] squashfs: version 4.0 (2009/01/31) Phillip Lougher +[ 0.988632] Loading boot drivers: ok. +[ 0.990779] Mounting boot media... +[ 1.003792] mmc1: new ultra high speed DDR50 SDIO card at address 0001 +[ 1.017768] usb 3-1: new low-speed USB device number 2 using xhci-hcd +[ 1.206965] usb 3-1: New USB device found, idVendor=046d, idProduct=c313, bcdDevice= 1.01 +[ 1.206976] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 +[ 1.206981] usb 3-1: Product: USB Multimedia Keyboard +[ 1.206985] usb 3-1: Manufacturer: LITEON Technology +[ 1.287102] input: LITEON Technology USB Multimedia Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1:1.0/0003:046D:C313.0001/input/input0 +[ 1.345637] hid-generic 0003:046D:C313.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-xhci-hcd.1-1/input0 +[ 1.366975] input: LITEON Technology USB Multimedia Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1:1.1/0003:046D:C313.0002/input/input1 +[ 1.370548] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs +[ 1.371754] EXT4-fs (mmcblk0p2): mounted filesystem e279b314-51dd-4303-99f6-e6dd3d0fa0ee ro with ordered data mode. Quota mode: none. +[ 1.404161] Mounting boot media: ok. +[ 1.406304] Loading user settings from /media/mmcblk0p1/localhost.apkovl.tar.gz... +[ 1.422352] Loading user settings from /media/mmcblk0p1/localhost.apkovl.tar.gz: ok. +[ 1.425842] hid-generic 0003:046D:C313.0002: input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-xhci-hcd.1-1/input1 +[ 1.784332] Installing packages to root filesystem... +[ 6.993285] Installing packages to root filesystem: ok. +[ 7.791302] loop0: detected capacity change from 0 to 61016 +[ 7.793573] F2FS-fs (loop0): Magic Mismatch, valid(0xf2f52010) - read(0x8eeb746f) +[ 7.793582] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock +[ 7.793601] F2FS-fs (loop0): Magic Mismatch, valid(0xf2f52010) - read(0xfde4274) +[ 7.793605] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock +[ 8.769953] Bluetooth: Core ver 2.22 +[ 8.770050] NET: Registered PF_BLUETOOTH protocol family +[ 8.770054] Bluetooth: HCI device and connection manager initialized +[ 8.770063] Bluetooth: HCI socket layer initialized +[ 8.770067] Bluetooth: L2CAP socket layer initialized +[ 8.770074] Bluetooth: SCO socket layer initialized +[ 8.783485] Bluetooth: HCI UART driver ver 2.3 +[ 8.783494] Bluetooth: HCI UART protocol H4 registered +[ 8.783564] Bluetooth: HCI UART protocol Three-wire (H5) registered +[ 8.783669] Bluetooth: HCI UART protocol Broadcom registered +[ 8.783759] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator +[ 8.783826] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator +[ 9.032037] mc: Linux media interface: v0.10 +[ 9.064354] videodev: Linux video capture interface: v2.00 +[ 9.084537] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. +[ 9.085249] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu +[ 9.086528] rpivid 1000800000.codec: Device registered as /dev/video19 +[ 9.096716] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 +[ 9.096892] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 +[ 9.096982] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 +[ 9.101589] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 +[ 9.101698] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 +[ 9.102379] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 +[ 9.102458] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 +[ 9.107966] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 +[ 9.108129] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 +[ 9.108236] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 +[ 9.129357] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu +[ 9.145491] Bluetooth: hci0: BCM: chip id 107 +[ 9.146503] Bluetooth: hci0: BCM: features 0x2f +[ 9.148084] Bluetooth: hci0: BCM4345C0 +[ 9.148089] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 +[ 9.149435] pispbe 1000880000.pisp_be: Runtime PM usage count underflow! +[ 9.170388] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch +[ 9.176868] input: pwr_button as /devices/platform/pwr_button/input/input2 +[ 9.285770] cfg80211: Loading compiled-in X.509 certificates for regulatory database +[ 9.317041] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' +[ 9.317568] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' +[ 9.318081] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' +[ 9.318595] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' +[ 9.390422] brcmfmac: F1 signature read @0x18000000=0x15264345 +[ 9.392041] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 +[ 9.393210] usbcore: registered new interface driver brcmfmac +[ 9.632625] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) +[ 9.632888] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2 +[ 9.926355] NET: Registered PF_PACKET protocol family +[ 9.974122] Bluetooth: hci0: BCM: features 0x2f +[ 9.975553] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190 +[ 9.975558] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382 +[ 9.975856] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac) +[ 9.993422] NET: Registered PF_INET6 protocol family +[ 9.993959] Segment Routing with IPv6 +[ 9.993971] In-situ OAM (IOAM) with IPv6 +[ 10.146581] EXT4-fs (mmcblk0p2): re-mounted e279b314-51dd-4303-99f6-e6dd3d0fa0ee r/w. Quota mode: none. diff --git a/experiment-setup/kernel_logs/go-gorilla/go-gorilla-kernel-logs.txt b/experiment-setup/kernel_logs/go-gorilla/go-gorilla-kernel-logs.txt new file mode 100644 index 00000000..2809551a --- /dev/null +++ b/experiment-setup/kernel_logs/go-gorilla/go-gorilla-kernel-logs.txt @@ -0,0 +1,418 @@ +[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] +[ 0.000000] Linux version 6.6.49-0-rpi (buildozer@build-3-20-aarch64) (gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #1-Alpine SMP PREEMPT Thu Sep 5 10:58:11 UTC 2024 +[ 0.000000] KASLR enabled +[ 0.000000] random: crng init done +[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 +[ 0.000000] efi: UEFI not found. +[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000001c00000, size 64 MiB +[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool +[ 0.000000] OF: reserved mem: 0x0000000001c00000..0x0000000005bfffff (65536 KiB) map reusable linux,cma +[ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0 +[ 0.000000] OF: reserved mem: 0x000000003fd16200..0x000000003fd16237 (0 KiB) nomap non-reusable nvram@0 +[ 0.000000] Zone ranges: +[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] +[ 0.000000] DMA32 empty +[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] +[ 0.000000] Movable zone start for each node +[ 0.000000] Early memory node ranges +[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] +[ 0.000000] node 0: [mem 0x0000000000080000-0x000000003f7fffff] +[ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff] +[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] +[ 0.000000] On node 0, zone DMA: 2048 pages in unavailable ranges +[ 0.000000] psci: probing for conduit method from DT. +[ 0.000000] psci: PSCIv1.1 detected in firmware. +[ 0.000000] psci: Using standard PSCI v0.2 function IDs +[ 0.000000] psci: MIGRATE_INFO_TYPE not supported. +[ 0.000000] psci: SMC Calling Convention v1.2 +[ 0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880 +[ 0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096 +[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 +[ 0.000000] Detected PIPT I-cache on CPU0 +[ 0.000000] CPU features: detected: Virtualization Host Extensions +[ 0.000000] CPU features: detected: Hardware dirty bit management +[ 0.000000] CPU features: detected: Spectre-v4 +[ 0.000000] CPU features: detected: Spectre-BHB +[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR +[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) +[ 0.000000] CPU features: detected: SSBS not fully self-synchronizing +[ 0.000000] alternatives: applying boot alternatives +[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=2C:CF:67:8A:43:1D vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 modules=loop,squashfs,sd-mod,usb-storage quiet console=tty1 +[ 0.000000] Unknown kernel command line parameters "modules=loop,squashfs,sd-mod,usb-storage", will be passed to user space. +[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) +[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) +[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2062336 +[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off +[ 0.000000] software IO TLB: area num 4. +[ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB) +[ 0.000000] Memory: 8057156K/8380416K available (12608K kernel code, 2208K rwdata, 4252K rodata, 3456K init, 1073K bss, 257724K reserved, 65536K cma-reserved) +[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 +[ 0.000000] trace event string verifier disabled +[ 0.000000] rcu: Preemptible hierarchical RCU implementation. +[ 0.000000] rcu: RCU event tracing is enabled. +[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. +[ 0.000000] Trampoline variant of Tasks RCU enabled. +[ 0.000000] Tracing variant of Tasks RCU enabled. +[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. +[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 +[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 +[ 0.000000] Root IRQ handler: gic_handle_irq +[ 0.000000] GIC: Using split EOI/Deactivate mode +[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. +[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). +[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns +[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns +[ 0.000228] Console: colour dummy device 80x25 +[ 0.000234] printk: console [tty1] enabled +[ 0.000276] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) +[ 0.000282] pid_max: default: 32768 minimum: 301 +[ 0.000370] LSM: initializing lsm=capability,integrity +[ 0.000476] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) +[ 0.000516] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) +[ 0.001011] cgroup: Disabling memory control group subsystem +[ 0.001710] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. +[ 0.001761] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. +[ 0.001861] rcu: Hierarchical SRCU implementation. +[ 0.001863] rcu: Max phase no-delay instances is 1000. +[ 0.002718] EFI services will not be available. +[ 0.002828] smp: Bringing up secondary CPUs ... +[ 0.003073] Detected PIPT I-cache on CPU1 +[ 0.003123] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] +[ 0.003370] Detected PIPT I-cache on CPU2 +[ 0.003417] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] +[ 0.003668] Detected PIPT I-cache on CPU3 +[ 0.003710] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] +[ 0.003747] smp: Brought up 1 node, 4 CPUs +[ 0.003753] SMP: Total of 4 processors activated. +[ 0.003757] CPU features: detected: 32-bit EL0 Support +[ 0.003760] CPU features: detected: Data cache clean to the PoU not required for I/D coherence +[ 0.003763] CPU features: detected: Common not Private translations +[ 0.003765] CPU features: detected: CRC32 instructions +[ 0.003768] CPU features: detected: RCpc load-acquire (LDAPR) +[ 0.003770] CPU features: detected: LSE atomic instructions +[ 0.003773] CPU features: detected: Privileged Access Never +[ 0.003775] CPU features: detected: RAS Extension Support +[ 0.003779] CPU features: detected: Speculative Store Bypassing Safe (SSBS) +[ 0.003823] CPU: All CPU(s) started at EL2 +[ 0.003825] alternatives: applying system-wide alternatives +[ 0.006082] devtmpfs: initialized +[ 0.010622] Enabled cp15_barrier support +[ 0.010631] Enabled setend support +[ 0.010692] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns +[ 0.010700] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) +[ 0.011462] pinctrl core: initialized pinctrl subsystem +[ 0.011632] DMI not present or invalid. +[ 0.011832] NET: Registered PF_NETLINK/PF_ROUTE protocol family +[ 0.012415] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations +[ 0.012502] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations +[ 0.012630] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations +[ 0.012672] audit: initializing netlink subsys (disabled) +[ 0.012737] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1 +[ 0.012921] thermal_sys: Registered thermal governor 'step_wise' +[ 0.012936] cpuidle: using governor menu +[ 0.012999] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. +[ 0.013037] ASID allocator initialised with 32768 entries +[ 0.013475] Serial: AMBA PL011 UART driver +[ 0.014636] bcm2835-mbox 107c013880.mailbox: mailbox enabled +[ 0.014926] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2 +[ 0.021460] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-06-05T15:41:49, variant start_cd +[ 0.025457] raspberrypi-firmware soc:firmware: Firmware hash is 6fe0b09100000000000000000000000000000000 +[ 0.032836] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL +[ 0.032839] Modules: 0 pages in range for non-PLT usage +[ 0.032841] Modules: 518336 pages in range for PLT usage +[ 0.035729] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 +[ 0.036259] iommu: Default domain type: Translated +[ 0.036263] iommu: DMA domain TLB invalidation policy: strict mode +[ 0.036393] SCSI subsystem initialized +[ 0.036451] usbcore: registered new interface driver usbfs +[ 0.036464] usbcore: registered new interface driver hub +[ 0.036478] usbcore: registered new device driver usb +[ 0.036594] pps_core: LinuxPPS API ver. 1 registered +[ 0.036596] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti +[ 0.036602] PTP clock support registered +[ 0.036996] vgaarb: loaded +[ 0.037454] clocksource: Switched to clocksource arch_sys_counter +[ 0.470998] VFS: Disk quotas dquot_6.6.0 +[ 0.471018] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) +[ 0.471058] FS-Cache: Loaded +[ 0.471120] CacheFiles: Loaded +[ 0.473492] NET: Registered PF_INET protocol family +[ 0.473734] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) +[ 0.477283] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) +[ 0.477338] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) +[ 0.477347] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) +[ 0.477767] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) +[ 0.479488] TCP: Hash tables configured (established 65536 bind 65536) +[ 0.479662] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) +[ 0.479785] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) +[ 0.479933] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) +[ 0.480139] NET: Registered PF_UNIX/PF_LOCAL protocol family +[ 0.480368] RPC: Registered named UNIX socket transport module. +[ 0.480371] RPC: Registered udp transport module. +[ 0.480373] RPC: Registered tcp transport module. +[ 0.480375] RPC: Registered tcp-with-tls transport module. +[ 0.480377] RPC: Registered tcp NFSv4.1 backchannel transport module. +[ 0.480384] PCI: CLS 0 bytes, default 64 +[ 0.480554] Trying to unpack rootfs image as initramfs... +[ 0.485545] kvm [1]: IPA Size Limit: 40 bits +[ 0.485586] kvm [1]: vgic interrupt IRQ9 +[ 0.485614] kvm [1]: VHE mode initialized successfully +[ 0.486215] Initialise system trusted keyrings +[ 0.486700] workingset: timestamp_bits=46 max_order=21 bucket_order=0 +[ 0.486723] zbud: loaded +[ 0.487127] NFS: Registering the id_resolver key type +[ 0.487136] Key type id_resolver registered +[ 0.487139] Key type id_legacy registered +[ 0.487148] nfs4filelayout_init: NFSv4 File Layout Driver Registering... +[ 0.487151] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... +[ 0.487429] Key type asymmetric registered +[ 0.487433] Asymmetric key parser 'x509' registered +[ 0.487484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) +[ 0.487537] io scheduler mq-deadline registered +[ 0.487540] io scheduler kyber registered +[ 0.487559] io scheduler bfq registered +[ 0.487938] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 26) +[ 0.488069] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 27) +[ 0.488172] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 28) +[ 0.488273] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 29) +[ 0.491895] bcm2708_fb soc:fb: FB found 1 display(s) +[ 0.499086] Console: switching to colour frame buffer device 240x67 +[ 0.503279] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080 +[ 0.535399] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled +[ 0.536584] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 32, base_baud = 6000000) is a Broadcom BCM7271 UART +[ 0.536675] serial serial0: tty port ttyS0 registered +[ 0.537637] iproc-rng200 107d208000.rng: hwrng registered +[ 0.537834] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) +[ 0.538350] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe +[ 0.542878] brd: module loaded +[ 0.545715] loop: module loaded +[ 0.545941] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver +[ 0.546436] Loading iSCSI transport class v2.0-870. +[ 0.548399] usbcore: registered new device driver r8152-cfgselector +[ 0.548415] usbcore: registered new interface driver r8152 +[ 0.548428] usbcore: registered new interface driver lan78xx +[ 0.548440] usbcore: registered new interface driver smsc95xx +[ 0.548517] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) +[ 0.548551] dwc_otg: FIQ enabled +[ 0.548553] dwc_otg: NAK holdoff enabled +[ 0.548556] dwc_otg: FIQ split-transaction FSM enabled +[ 0.548559] Module dwc_common_port init +[ 0.551335] usbcore: registered new interface driver uas +[ 0.551354] usbcore: registered new interface driver usb-storage +[ 0.551763] mousedev: PS/2 mouse device common for all mice +[ 0.559767] rpi-rtc soc:rpi_rtc: registered as rtc0 +[ 0.561212] rpi-rtc soc:rpi_rtc: setting system clock to 1970-01-01T00:00:08 UTC (8) +[ 0.562179] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! +[ 0.562185] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer +[ 0.565143] sdhci: Secure Digital Host Controller Interface driver +[ 0.565147] sdhci: Copyright(c) Pierre Ossman +[ 0.565244] sdhci-pltfm: SDHCI platform and OF driver helper +[ 0.566541] ledtrig-cpu: registered to indicate activity on CPUs +[ 0.566718] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... +[ 0.566748] hid: raw HID events driver (C) Jiri Kosina +[ 0.566794] usbcore: registered new interface driver usbhid +[ 0.566797] usbhid: USB HID core driver +[ 0.567480] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available +[ 0.568097] Key type dns_resolver registered +[ 0.586273] registered taskstats version 1 +[ 0.586374] Loading compiled-in X.509 certificates +[ 0.590364] Key type .fscrypt registered +[ 0.590369] Key type fscrypt-provisioning registered +[ 0.591944] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: +[ 0.591956] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] +[ 0.591972] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 +[ 0.591982] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 +[ 0.591995] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 +[ 0.592002] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 +[ 0.597186] brcm-pcie 1000120000.pcie: Forcing gen 2 +[ 0.597502] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00 +[ 0.597509] pci_bus 0000:00: root bus resource [bus 00-ff] +[ 0.597516] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) +[ 0.597521] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) +[ 0.597540] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400 +[ 0.597575] pci 0000:00:00.0: PME# supported from D0 D3hot +[ 0.598896] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring +[ 0.674876] Freeing initrd memory: 6392K +[ 0.709468] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) +[ 0.709503] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000 +[ 0.709521] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff] +[ 0.709532] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff] +[ 0.709540] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff] +[ 0.709622] pci 0000:01:00.0: supports D1 +[ 0.709625] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold +[ 0.721468] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 +[ 0.721483] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff] +[ 0.721490] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff] +[ 0.721496] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff] +[ 0.721503] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff] +[ 0.721509] pci 0000:00:00.0: PCI bridge to [bus 01] +[ 0.721513] pci 0000:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] +[ 0.721520] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 +[ 0.721531] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 +[ 0.721650] pcieport 0000:00:00.0: enabling device (0000 -> 0002) +[ 0.721709] pcieport 0000:00:00.0: PME: Signaling with IRQ 37 +[ 0.721910] pcieport 0000:00:00.0: AER: enabled with IRQ 37 +[ 0.722047] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 +[ 0.722053] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 +[ 0.722064] rp1 0000:01:00.0: enabling device (0000 -> 0002) +[ 0.723321] rp1 0000:01:00.0: chip_id 0x20001927 +[ 0.729422] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 99 +[ 0.754238] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 105 (2c:cf:67:8a:43:1d) +[ 0.755694] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels +[ 0.756078] xhci-hcd xhci-hcd.0: xHCI Host Controller +[ 0.756087] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 +[ 0.756562] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 +[ 0.756580] xhci-hcd xhci-hcd.0: irq 130, io mem 0x1f00200000 +[ 0.756669] xhci-hcd xhci-hcd.0: xHCI Host Controller +[ 0.756673] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 +[ 0.756678] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed +[ 0.757051] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 +[ 0.757058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.757062] usb usb1: Product: xHCI Host Controller +[ 0.757065] usb usb1: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.757068] usb usb1: SerialNumber: xhci-hcd.0 +[ 0.757288] hub 1-0:1.0: USB hub found +[ 0.757322] hub 1-0:1.0: 2 ports detected +[ 0.757611] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 +[ 0.757617] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.757621] usb usb2: Product: xHCI Host Controller +[ 0.757624] usb usb2: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.757627] usb usb2: SerialNumber: xhci-hcd.0 +[ 0.757776] hub 2-0:1.0: USB hub found +[ 0.757838] hub 2-0:1.0: 1 port detected +[ 0.758316] xhci-hcd xhci-hcd.1: xHCI Host Controller +[ 0.758324] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 +[ 0.758790] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 +[ 0.758808] xhci-hcd xhci-hcd.1: irq 135, io mem 0x1f00300000 +[ 0.758897] xhci-hcd xhci-hcd.1: xHCI Host Controller +[ 0.758902] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 +[ 0.758906] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed +[ 0.759140] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 +[ 0.759145] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.759149] usb usb3: Product: xHCI Host Controller +[ 0.759152] usb usb3: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.759155] usb usb3: SerialNumber: xhci-hcd.1 +[ 0.759342] hub 3-0:1.0: USB hub found +[ 0.759384] hub 3-0:1.0: 2 ports detected +[ 0.759623] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 +[ 0.759628] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.759632] usb usb4: Product: xHCI Host Controller +[ 0.759635] usb usb4: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.759638] usb usb4: SerialNumber: xhci-hcd.1 +[ 0.759816] hub 4-0:1.0: USB hub found +[ 0.759852] hub 4-0:1.0: 1 port detected +[ 0.760966] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.761402] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu +[ 0.761409] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu +[ 0.761415] platform 1000800000.codec: Adding to iommu group 0 +[ 0.761429] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu +[ 0.761435] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu +[ 0.761441] platform 1000880000.pisp_be: Adding to iommu group 0 +[ 0.761488] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu +[ 0.761492] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu +[ 0.761499] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success +[ 0.762064] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.762491] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success +[ 0.763156] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.763586] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success +[ 0.764881] of_cfs_init +[ 0.764915] of_cfs_init: OK +[ 0.765058] clk: Disabling unused clocks +[ 0.765447] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO +[ 0.774701] mmc0: CQHCI version 5.10 +[ 0.774764] mmc1: CQHCI version 5.10 +[ 0.809470] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit +[ 0.902847] mmc0: new ultra high speed SDR104 SDHC card at address 59b4 +[ 0.903150] mmcblk0: mmc0:59b4 LX32G 29.5 GiB +[ 0.904401] mmcblk0: p1 p2 +[ 0.904597] mmcblk0: mmc0:59b4 LX32G 29.5 GiB +[ 0.964010] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit +[ 0.966238] Freeing unused kernel memory: 3456K +[ 0.966316] Run /init as init process +[ 0.966318] with arguments: +[ 0.966320] /init +[ 0.966321] with environment: +[ 0.966323] HOME=/ +[ 0.966325] TERM=linux +[ 0.966326] modules=loop,squashfs,sd-mod,usb-storage +[ 0.982337] Alpine Init 3.10.1-r0 +[ 0.983421] Loading boot drivers... +[ 0.988105] squashfs: version 4.0 (2009/01/31) Phillip Lougher +[ 0.988632] Loading boot drivers: ok. +[ 0.990779] Mounting boot media... +[ 1.003792] mmc1: new ultra high speed DDR50 SDIO card at address 0001 +[ 1.017768] usb 3-1: new low-speed USB device number 2 using xhci-hcd +[ 1.206965] usb 3-1: New USB device found, idVendor=046d, idProduct=c313, bcdDevice= 1.01 +[ 1.206976] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 +[ 1.206981] usb 3-1: Product: USB Multimedia Keyboard +[ 1.206985] usb 3-1: Manufacturer: LITEON Technology +[ 1.287102] input: LITEON Technology USB Multimedia Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1:1.0/0003:046D:C313.0001/input/input0 +[ 1.345637] hid-generic 0003:046D:C313.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-xhci-hcd.1-1/input0 +[ 1.366975] input: LITEON Technology USB Multimedia Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1:1.1/0003:046D:C313.0002/input/input1 +[ 1.370548] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs +[ 1.371754] EXT4-fs (mmcblk0p2): mounted filesystem e279b314-51dd-4303-99f6-e6dd3d0fa0ee ro with ordered data mode. Quota mode: none. +[ 1.404161] Mounting boot media: ok. +[ 1.406304] Loading user settings from /media/mmcblk0p1/localhost.apkovl.tar.gz... +[ 1.422352] Loading user settings from /media/mmcblk0p1/localhost.apkovl.tar.gz: ok. +[ 1.425842] hid-generic 0003:046D:C313.0002: input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-xhci-hcd.1-1/input1 +[ 1.784332] Installing packages to root filesystem... +[ 6.993285] Installing packages to root filesystem: ok. +[ 7.791302] loop0: detected capacity change from 0 to 61016 +[ 7.793573] F2FS-fs (loop0): Magic Mismatch, valid(0xf2f52010) - read(0x8eeb746f) +[ 7.793582] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock +[ 7.793601] F2FS-fs (loop0): Magic Mismatch, valid(0xf2f52010) - read(0xfde4274) +[ 7.793605] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock +[ 8.769953] Bluetooth: Core ver 2.22 +[ 8.770050] NET: Registered PF_BLUETOOTH protocol family +[ 8.770054] Bluetooth: HCI device and connection manager initialized +[ 8.770063] Bluetooth: HCI socket layer initialized +[ 8.770067] Bluetooth: L2CAP socket layer initialized +[ 8.770074] Bluetooth: SCO socket layer initialized +[ 8.783485] Bluetooth: HCI UART driver ver 2.3 +[ 8.783494] Bluetooth: HCI UART protocol H4 registered +[ 8.783564] Bluetooth: HCI UART protocol Three-wire (H5) registered +[ 8.783669] Bluetooth: HCI UART protocol Broadcom registered +[ 8.783759] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator +[ 8.783826] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator +[ 9.032037] mc: Linux media interface: v0.10 +[ 9.064354] videodev: Linux video capture interface: v2.00 +[ 9.084537] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. +[ 9.085249] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu +[ 9.086528] rpivid 1000800000.codec: Device registered as /dev/video19 +[ 9.096716] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 +[ 9.096892] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 +[ 9.096982] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 +[ 9.101589] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 +[ 9.101698] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 +[ 9.102379] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 +[ 9.102458] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 +[ 9.107966] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 +[ 9.108129] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 +[ 9.108236] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 +[ 9.129357] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu +[ 9.145491] Bluetooth: hci0: BCM: chip id 107 +[ 9.146503] Bluetooth: hci0: BCM: features 0x2f +[ 9.148084] Bluetooth: hci0: BCM4345C0 +[ 9.148089] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 +[ 9.149435] pispbe 1000880000.pisp_be: Runtime PM usage count underflow! +[ 9.170388] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch +[ 9.176868] input: pwr_button as /devices/platform/pwr_button/input/input2 +[ 9.285770] cfg80211: Loading compiled-in X.509 certificates for regulatory database +[ 9.317041] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' +[ 9.317568] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' +[ 9.318081] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' +[ 9.318595] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' +[ 9.390422] brcmfmac: F1 signature read @0x18000000=0x15264345 +[ 9.392041] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 +[ 9.393210] usbcore: registered new interface driver brcmfmac +[ 9.632625] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) +[ 9.632888] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2 +[ 9.926355] NET: Registered PF_PACKET protocol family +[ 9.974122] Bluetooth: hci0: BCM: features 0x2f +[ 9.975553] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190 +[ 9.975558] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382 +[ 9.975856] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac) +[ 9.993422] NET: Registered PF_INET6 protocol family +[ 9.993959] Segment Routing with IPv6 +[ 9.993971] In-situ OAM (IOAM) with IPv6 +[ 10.146581] EXT4-fs (mmcblk0p2): re-mounted e279b314-51dd-4303-99f6-e6dd3d0fa0ee r/w. Quota mode: none. diff --git a/experiment-setup/kernel_logs/javascript-express/javascript-express-kernel-logs.txt b/experiment-setup/kernel_logs/javascript-express/javascript-express-kernel-logs.txt new file mode 100644 index 00000000..46857d5e --- /dev/null +++ b/experiment-setup/kernel_logs/javascript-express/javascript-express-kernel-logs.txt @@ -0,0 +1,418 @@ +[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] +[ 0.000000] Linux version 6.6.49-0-rpi (buildozer@build-3-20-aarch64) (gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #1-Alpine SMP PREEMPT Thu Sep 5 10:58:11 UTC 2024 +[ 0.000000] KASLR enabled +[ 0.000000] random: crng init done +[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 +[ 0.000000] efi: UEFI not found. +[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000001c00000, size 64 MiB +[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool +[ 0.000000] OF: reserved mem: 0x0000000001c00000..0x0000000005bfffff (65536 KiB) map reusable linux,cma +[ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0 +[ 0.000000] OF: reserved mem: 0x000000003fd16200..0x000000003fd16237 (0 KiB) nomap non-reusable nvram@0 +[ 0.000000] Zone ranges: +[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] +[ 0.000000] DMA32 empty +[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] +[ 0.000000] Movable zone start for each node +[ 0.000000] Early memory node ranges +[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] +[ 0.000000] node 0: [mem 0x0000000000080000-0x000000003f7fffff] +[ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff] +[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] +[ 0.000000] On node 0, zone DMA: 2048 pages in unavailable ranges +[ 0.000000] psci: probing for conduit method from DT. +[ 0.000000] psci: PSCIv1.1 detected in firmware. +[ 0.000000] psci: Using standard PSCI v0.2 function IDs +[ 0.000000] psci: MIGRATE_INFO_TYPE not supported. +[ 0.000000] psci: SMC Calling Convention v1.2 +[ 0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880 +[ 0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096 +[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 +[ 0.000000] Detected PIPT I-cache on CPU0 +[ 0.000000] CPU features: detected: Virtualization Host Extensions +[ 0.000000] CPU features: detected: Hardware dirty bit management +[ 0.000000] CPU features: detected: Spectre-v4 +[ 0.000000] CPU features: detected: Spectre-BHB +[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR +[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) +[ 0.000000] CPU features: detected: SSBS not fully self-synchronizing +[ 0.000000] alternatives: applying boot alternatives +[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=2C:CF:67:8A:43:1D vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 modules=loop,squashfs,sd-mod,usb-storage quiet console=tty1 +[ 0.000000] Unknown kernel command line parameters "modules=loop,squashfs,sd-mod,usb-storage", will be passed to user space. +[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) +[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) +[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2062336 +[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off +[ 0.000000] software IO TLB: area num 4. +[ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB) +[ 0.000000] Memory: 8057156K/8380416K available (12608K kernel code, 2208K rwdata, 4252K rodata, 3456K init, 1073K bss, 257724K reserved, 65536K cma-reserved) +[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 +[ 0.000000] trace event string verifier disabled +[ 0.000000] rcu: Preemptible hierarchical RCU implementation. +[ 0.000000] rcu: RCU event tracing is enabled. +[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. +[ 0.000000] Trampoline variant of Tasks RCU enabled. +[ 0.000000] Tracing variant of Tasks RCU enabled. +[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. +[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 +[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 +[ 0.000000] Root IRQ handler: gic_handle_irq +[ 0.000000] GIC: Using split EOI/Deactivate mode +[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. +[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). +[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns +[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns +[ 0.000230] Console: colour dummy device 80x25 +[ 0.000236] printk: console [tty1] enabled +[ 0.000278] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) +[ 0.000285] pid_max: default: 32768 minimum: 301 +[ 0.000374] LSM: initializing lsm=capability,integrity +[ 0.000494] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) +[ 0.000540] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) +[ 0.001047] cgroup: Disabling memory control group subsystem +[ 0.001731] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. +[ 0.001785] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. +[ 0.001879] rcu: Hierarchical SRCU implementation. +[ 0.001881] rcu: Max phase no-delay instances is 1000. +[ 0.002709] EFI services will not be available. +[ 0.002819] smp: Bringing up secondary CPUs ... +[ 0.003051] Detected PIPT I-cache on CPU1 +[ 0.003102] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] +[ 0.003349] Detected PIPT I-cache on CPU2 +[ 0.003395] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] +[ 0.003641] Detected PIPT I-cache on CPU3 +[ 0.003683] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] +[ 0.003720] smp: Brought up 1 node, 4 CPUs +[ 0.003726] SMP: Total of 4 processors activated. +[ 0.003729] CPU features: detected: 32-bit EL0 Support +[ 0.003732] CPU features: detected: Data cache clean to the PoU not required for I/D coherence +[ 0.003735] CPU features: detected: Common not Private translations +[ 0.003737] CPU features: detected: CRC32 instructions +[ 0.003740] CPU features: detected: RCpc load-acquire (LDAPR) +[ 0.003742] CPU features: detected: LSE atomic instructions +[ 0.003745] CPU features: detected: Privileged Access Never +[ 0.003747] CPU features: detected: RAS Extension Support +[ 0.003750] CPU features: detected: Speculative Store Bypassing Safe (SSBS) +[ 0.003793] CPU: All CPU(s) started at EL2 +[ 0.003795] alternatives: applying system-wide alternatives +[ 0.006018] devtmpfs: initialized +[ 0.010555] Enabled cp15_barrier support +[ 0.010563] Enabled setend support +[ 0.010624] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns +[ 0.010633] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) +[ 0.011396] pinctrl core: initialized pinctrl subsystem +[ 0.011566] DMI not present or invalid. +[ 0.011762] NET: Registered PF_NETLINK/PF_ROUTE protocol family +[ 0.012346] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations +[ 0.012433] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations +[ 0.012559] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations +[ 0.012601] audit: initializing netlink subsys (disabled) +[ 0.012665] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1 +[ 0.012849] thermal_sys: Registered thermal governor 'step_wise' +[ 0.012865] cpuidle: using governor menu +[ 0.012928] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. +[ 0.012965] ASID allocator initialised with 32768 entries +[ 0.013390] Serial: AMBA PL011 UART driver +[ 0.014548] bcm2835-mbox 107c013880.mailbox: mailbox enabled +[ 0.014833] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2 +[ 0.021381] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-06-05T15:41:49, variant start_cd +[ 0.025385] raspberrypi-firmware soc:firmware: Firmware hash is 6fe0b09100000000000000000000000000000000 +[ 0.032750] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL +[ 0.032753] Modules: 0 pages in range for non-PLT usage +[ 0.032755] Modules: 518336 pages in range for PLT usage +[ 0.035710] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 +[ 0.036239] iommu: Default domain type: Translated +[ 0.036243] iommu: DMA domain TLB invalidation policy: strict mode +[ 0.036373] SCSI subsystem initialized +[ 0.036431] usbcore: registered new interface driver usbfs +[ 0.036443] usbcore: registered new interface driver hub +[ 0.036458] usbcore: registered new device driver usb +[ 0.036573] pps_core: LinuxPPS API ver. 1 registered +[ 0.036576] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti +[ 0.036582] PTP clock support registered +[ 0.036980] vgaarb: loaded +[ 0.037466] clocksource: Switched to clocksource arch_sys_counter +[ 0.037623] VFS: Disk quotas dquot_6.6.0 +[ 0.037643] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) +[ 0.037679] FS-Cache: Loaded +[ 0.041479] CacheFiles: Loaded +[ 0.043735] NET: Registered PF_INET protocol family +[ 0.043935] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) +[ 0.047495] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) +[ 0.047550] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) +[ 0.047560] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) +[ 0.047972] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) +[ 0.049750] TCP: Hash tables configured (established 65536 bind 65536) +[ 0.049927] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) +[ 0.050046] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) +[ 0.050195] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) +[ 0.050402] NET: Registered PF_UNIX/PF_LOCAL protocol family +[ 0.050631] RPC: Registered named UNIX socket transport module. +[ 0.050634] RPC: Registered udp transport module. +[ 0.050636] RPC: Registered tcp transport module. +[ 0.050638] RPC: Registered tcp-with-tls transport module. +[ 0.050640] RPC: Registered tcp NFSv4.1 backchannel transport module. +[ 0.050647] PCI: CLS 0 bytes, default 64 +[ 0.050880] kvm [1]: IPA Size Limit: 40 bits +[ 0.050915] kvm [1]: vgic interrupt IRQ9 +[ 0.050936] kvm [1]: VHE mode initialized successfully +[ 0.053830] Trying to unpack rootfs image as initramfs... +[ 0.242943] Freeing initrd memory: 6392K +[ 0.472136] Initialise system trusted keyrings +[ 0.472208] workingset: timestamp_bits=46 max_order=21 bucket_order=0 +[ 0.472237] zbud: loaded +[ 0.472654] NFS: Registering the id_resolver key type +[ 0.472661] Key type id_resolver registered +[ 0.472664] Key type id_legacy registered +[ 0.472673] nfs4filelayout_init: NFSv4 File Layout Driver Registering... +[ 0.472677] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... +[ 0.472960] Key type asymmetric registered +[ 0.472963] Asymmetric key parser 'x509' registered +[ 0.473012] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) +[ 0.473065] io scheduler mq-deadline registered +[ 0.473069] io scheduler kyber registered +[ 0.473090] io scheduler bfq registered +[ 0.473489] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 26) +[ 0.473612] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 27) +[ 0.473716] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 28) +[ 0.473817] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 29) +[ 0.477750] bcm2708_fb soc:fb: FB found 1 display(s) +[ 0.484939] Console: switching to colour frame buffer device 240x67 +[ 0.489077] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080 +[ 0.520982] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled +[ 0.522013] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 32, base_baud = 6000000) is a Broadcom BCM7271 UART +[ 0.522100] serial serial0: tty port ttyS0 registered +[ 0.522918] iproc-rng200 107d208000.rng: hwrng registered +[ 0.523070] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) +[ 0.523535] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe +[ 0.527706] brd: module loaded +[ 0.530443] loop: module loaded +[ 0.530655] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver +[ 0.531170] Loading iSCSI transport class v2.0-870. +[ 0.532937] usbcore: registered new device driver r8152-cfgselector +[ 0.532952] usbcore: registered new interface driver r8152 +[ 0.532966] usbcore: registered new interface driver lan78xx +[ 0.532978] usbcore: registered new interface driver smsc95xx +[ 0.533056] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) +[ 0.533087] dwc_otg: FIQ enabled +[ 0.533089] dwc_otg: NAK holdoff enabled +[ 0.533091] dwc_otg: FIQ split-transaction FSM enabled +[ 0.533094] Module dwc_common_port init +[ 0.535630] usbcore: registered new interface driver uas +[ 0.535672] usbcore: registered new interface driver usb-storage +[ 0.536051] mousedev: PS/2 mouse device common for all mice +[ 0.544148] rpi-rtc soc:rpi_rtc: registered as rtc0 +[ 0.545580] rpi-rtc soc:rpi_rtc: setting system clock to 1970-01-01T00:00:08 UTC (8) +[ 0.546467] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! +[ 0.546472] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer +[ 0.549220] sdhci: Secure Digital Host Controller Interface driver +[ 0.549223] sdhci: Copyright(c) Pierre Ossman +[ 0.549279] sdhci-pltfm: SDHCI platform and OF driver helper +[ 0.550042] ledtrig-cpu: registered to indicate activity on CPUs +[ 0.550205] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... +[ 0.550280] hid: raw HID events driver (C) Jiri Kosina +[ 0.550366] usbcore: registered new interface driver usbhid +[ 0.550369] usbhid: USB HID core driver +[ 0.550935] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available +[ 0.551529] Key type dns_resolver registered +[ 0.568328] registered taskstats version 1 +[ 0.568470] Loading compiled-in X.509 certificates +[ 0.572473] Key type .fscrypt registered +[ 0.572478] Key type fscrypt-provisioning registered +[ 0.573490] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: +[ 0.573511] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] +[ 0.573542] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 +[ 0.573557] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 +[ 0.573577] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 +[ 0.573585] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 +[ 0.574804] brcm-pcie 1000120000.pcie: Forcing gen 2 +[ 0.575076] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00 +[ 0.575080] pci_bus 0000:00: root bus resource [bus 00-ff] +[ 0.575087] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) +[ 0.575091] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) +[ 0.575111] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400 +[ 0.575145] pci 0000:00:00.0: PME# supported from D0 D3hot +[ 0.576408] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring +[ 0.681480] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) +[ 0.681511] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000 +[ 0.681529] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff] +[ 0.681539] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff] +[ 0.681548] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff] +[ 0.681629] pci 0000:01:00.0: supports D1 +[ 0.681632] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold +[ 0.693497] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 +[ 0.693512] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff] +[ 0.693518] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff] +[ 0.693524] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff] +[ 0.693531] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff] +[ 0.693537] pci 0000:00:00.0: PCI bridge to [bus 01] +[ 0.693541] pci 0000:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] +[ 0.693548] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 +[ 0.693559] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 +[ 0.693669] pcieport 0000:00:00.0: enabling device (0000 -> 0002) +[ 0.693728] pcieport 0000:00:00.0: PME: Signaling with IRQ 37 +[ 0.693915] pcieport 0000:00:00.0: AER: enabled with IRQ 37 +[ 0.694096] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 +[ 0.694103] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 +[ 0.694115] rp1 0000:01:00.0: enabling device (0000 -> 0002) +[ 0.695475] rp1 0000:01:00.0: chip_id 0x20001927 +[ 0.701731] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 99 +[ 0.722257] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 105 (2c:cf:67:8a:43:1d) +[ 0.722947] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels +[ 0.723331] xhci-hcd xhci-hcd.0: xHCI Host Controller +[ 0.723340] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 +[ 0.723814] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 +[ 0.723832] xhci-hcd xhci-hcd.0: irq 130, io mem 0x1f00200000 +[ 0.723920] xhci-hcd xhci-hcd.0: xHCI Host Controller +[ 0.723925] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 +[ 0.723930] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed +[ 0.724408] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 +[ 0.724416] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.724420] usb usb1: Product: xHCI Host Controller +[ 0.724423] usb usb1: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.724426] usb usb1: SerialNumber: xhci-hcd.0 +[ 0.724623] hub 1-0:1.0: USB hub found +[ 0.724639] hub 1-0:1.0: 2 ports detected +[ 0.724938] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 +[ 0.724943] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.724947] usb usb2: Product: xHCI Host Controller +[ 0.724950] usb usb2: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.724953] usb usb2: SerialNumber: xhci-hcd.0 +[ 0.725133] hub 2-0:1.0: USB hub found +[ 0.725174] hub 2-0:1.0: 1 port detected +[ 0.725643] xhci-hcd xhci-hcd.1: xHCI Host Controller +[ 0.725651] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 +[ 0.726114] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 +[ 0.726132] xhci-hcd xhci-hcd.1: irq 135, io mem 0x1f00300000 +[ 0.726220] xhci-hcd xhci-hcd.1: xHCI Host Controller +[ 0.726224] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 +[ 0.726229] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed +[ 0.726476] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 +[ 0.726482] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.726485] usb usb3: Product: xHCI Host Controller +[ 0.726489] usb usb3: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.726491] usb usb3: SerialNumber: xhci-hcd.1 +[ 0.726673] hub 3-0:1.0: USB hub found +[ 0.726715] hub 3-0:1.0: 2 ports detected +[ 0.726947] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 +[ 0.726952] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.726955] usb usb4: Product: xHCI Host Controller +[ 0.726958] usb usb4: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.726961] usb usb4: SerialNumber: xhci-hcd.1 +[ 0.727131] hub 4-0:1.0: USB hub found +[ 0.727167] hub 4-0:1.0: 1 port detected +[ 0.728309] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.728745] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu +[ 0.728753] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu +[ 0.728761] platform 1000800000.codec: Adding to iommu group 0 +[ 0.728775] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu +[ 0.728781] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu +[ 0.728787] platform 1000880000.pisp_be: Adding to iommu group 0 +[ 0.728817] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu +[ 0.728821] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu +[ 0.728828] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success +[ 0.729411] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.729906] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success +[ 0.730525] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.730951] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success +[ 0.731875] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO +[ 0.732037] of_cfs_init +[ 0.732079] of_cfs_init: OK +[ 0.732141] mmc1: CQHCI version 5.10 +[ 0.732168] mmc0: CQHCI version 5.10 +[ 0.732182] clk: Disabling unused clocks +[ 0.768587] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit +[ 0.862177] mmc0: new ultra high speed SDR104 SDHC card at address 59b4 +[ 0.862512] mmcblk0: mmc0:59b4 LX32G 29.5 GiB +[ 0.863771] mmcblk0: p1 p2 +[ 0.864010] mmcblk0: mmc0:59b4 LX32G 29.5 GiB +[ 0.920016] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit +[ 0.922252] Freeing unused kernel memory: 3456K +[ 0.922329] Run /init as init process +[ 0.922332] with arguments: +[ 0.922333] /init +[ 0.922335] with environment: +[ 0.922337] HOME=/ +[ 0.922338] TERM=linux +[ 0.922340] modules=loop,squashfs,sd-mod,usb-storage +[ 0.938179] Alpine Init 3.10.1-r0 +[ 0.939292] Loading boot drivers... +[ 0.943901] squashfs: version 4.0 (2009/01/31) Phillip Lougher +[ 0.944485] Loading boot drivers: ok. +[ 0.946590] Mounting boot media... +[ 0.958357] mmc1: new ultra high speed DDR50 SDIO card at address 0001 +[ 0.978722] usb 1-2: new low-speed USB device number 2 using xhci-hcd +[ 1.166079] usb 1-2: New USB device found, idVendor=046d, idProduct=c313, bcdDevice= 1.01 +[ 1.166090] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 +[ 1.166094] usb 1-2: Product: USB Multimedia Keyboard +[ 1.166098] usb 1-2: Manufacturer: LITEON Technology +[ 1.236148] input: LITEON Technology USB Multimedia Keyboard as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.0/0003:046D:C313.0001/input/input0 +[ 1.297638] hid-generic 0003:046D:C313.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-xhci-hcd.0-2/input0 +[ 1.314418] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs +[ 1.315602] EXT4-fs (mmcblk0p2): mounted filesystem e279b314-51dd-4303-99f6-e6dd3d0fa0ee ro with ordered data mode. Quota mode: none. +[ 1.316005] input: LITEON Technology USB Multimedia Keyboard as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:046D:C313.0002/input/input1 +[ 1.351475] Mounting boot media: ok. +[ 1.353509] Loading user settings from /media/mmcblk0p1/localhost.apkovl.tar.gz... +[ 1.368682] Loading user settings from /media/mmcblk0p1/localhost.apkovl.tar.gz: ok. +[ 1.374197] hid-generic 0003:046D:C313.0002: input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-xhci-hcd.0-2/input1 +[ 1.730356] Installing packages to root filesystem... +[ 6.935990] Installing packages to root filesystem: ok. +[ 7.732683] loop0: detected capacity change from 0 to 61016 +[ 7.735012] F2FS-fs (loop0): Magic Mismatch, valid(0xf2f52010) - read(0x8eeb746f) +[ 7.735021] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock +[ 7.735043] F2FS-fs (loop0): Magic Mismatch, valid(0xf2f52010) - read(0xfde4274) +[ 7.735047] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock +[ 8.723281] Bluetooth: Core ver 2.22 +[ 8.723390] NET: Registered PF_BLUETOOTH protocol family +[ 8.723394] Bluetooth: HCI device and connection manager initialized +[ 8.723403] Bluetooth: HCI socket layer initialized +[ 8.723408] Bluetooth: L2CAP socket layer initialized +[ 8.723416] Bluetooth: SCO socket layer initialized +[ 8.736857] Bluetooth: HCI UART driver ver 2.3 +[ 8.736865] Bluetooth: HCI UART protocol H4 registered +[ 8.736933] Bluetooth: HCI UART protocol Three-wire (H5) registered +[ 8.737029] Bluetooth: HCI UART protocol Broadcom registered +[ 8.737198] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator +[ 8.737308] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator +[ 8.986242] mc: Linux media interface: v0.10 +[ 9.018711] videodev: Linux video capture interface: v2.00 +[ 9.038850] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. +[ 9.039575] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu +[ 9.040853] rpivid 1000800000.codec: Device registered as /dev/video19 +[ 9.048899] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 +[ 9.049068] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 +[ 9.049158] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 +[ 9.054044] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 +[ 9.054172] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 +[ 9.057495] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 +[ 9.057576] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 +[ 9.057660] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 +[ 9.057804] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 +[ 9.057869] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 +[ 9.078151] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu +[ 9.086289] pispbe 1000880000.pisp_be: Runtime PM usage count underflow! +[ 9.095845] input: pwr_button as /devices/platform/pwr_button/input/input2 +[ 9.109407] Bluetooth: hci0: BCM: chip id 107 +[ 9.109800] Bluetooth: hci0: BCM: features 0x2f +[ 9.110938] Bluetooth: hci0: BCM4345C0 +[ 9.110942] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 +[ 9.133912] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch +[ 9.222104] cfg80211: Loading compiled-in X.509 certificates for regulatory database +[ 9.253840] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' +[ 9.254311] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' +[ 9.254767] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' +[ 9.255223] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' +[ 9.337906] brcmfmac: F1 signature read @0x18000000=0x15264345 +[ 9.339596] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 +[ 9.342305] usbcore: registered new interface driver brcmfmac +[ 9.580943] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) +[ 9.581219] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2 +[ 9.881656] NET: Registered PF_PACKET protocol family +[ 9.934174] Bluetooth: hci0: BCM: features 0x2f +[ 9.935646] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190 +[ 9.935651] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382 +[ 9.935981] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac) +[ 9.949058] NET: Registered PF_INET6 protocol family +[ 9.949590] Segment Routing with IPv6 +[ 9.949601] In-situ OAM (IOAM) with IPv6 +[ 10.102686] EXT4-fs (mmcblk0p2): re-mounted e279b314-51dd-4303-99f6-e6dd3d0fa0ee r/w. Quota mode: none. diff --git a/experiment-setup/kernel_logs/python-flask/python-flask-kernel-logs.txt b/experiment-setup/kernel_logs/python-flask/python-flask-kernel-logs.txt new file mode 100644 index 00000000..dec3aa21 --- /dev/null +++ b/experiment-setup/kernel_logs/python-flask/python-flask-kernel-logs.txt @@ -0,0 +1,418 @@ +[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] +[ 0.000000] Linux version 6.6.49-0-rpi (buildozer@build-3-20-aarch64) (gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #1-Alpine SMP PREEMPT Thu Sep 5 10:58:11 UTC 2024 +[ 0.000000] KASLR enabled +[ 0.000000] random: crng init done +[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 +[ 0.000000] efi: UEFI not found. +[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000001c00000, size 64 MiB +[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool +[ 0.000000] OF: reserved mem: 0x0000000001c00000..0x0000000005bfffff (65536 KiB) map reusable linux,cma +[ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0 +[ 0.000000] OF: reserved mem: 0x000000003fd16200..0x000000003fd16237 (0 KiB) nomap non-reusable nvram@0 +[ 0.000000] Zone ranges: +[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] +[ 0.000000] DMA32 empty +[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] +[ 0.000000] Movable zone start for each node +[ 0.000000] Early memory node ranges +[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] +[ 0.000000] node 0: [mem 0x0000000000080000-0x000000003f7fffff] +[ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff] +[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] +[ 0.000000] On node 0, zone DMA: 2048 pages in unavailable ranges +[ 0.000000] psci: probing for conduit method from DT. +[ 0.000000] psci: PSCIv1.1 detected in firmware. +[ 0.000000] psci: Using standard PSCI v0.2 function IDs +[ 0.000000] psci: MIGRATE_INFO_TYPE not supported. +[ 0.000000] psci: SMC Calling Convention v1.2 +[ 0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880 +[ 0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096 +[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 +[ 0.000000] Detected PIPT I-cache on CPU0 +[ 0.000000] CPU features: detected: Virtualization Host Extensions +[ 0.000000] CPU features: detected: Hardware dirty bit management +[ 0.000000] CPU features: detected: Spectre-v4 +[ 0.000000] CPU features: detected: Spectre-BHB +[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR +[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) +[ 0.000000] CPU features: detected: SSBS not fully self-synchronizing +[ 0.000000] alternatives: applying boot alternatives +[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=2C:CF:67:8A:43:1D vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 modules=loop,squashfs,sd-mod,usb-storage quiet console=tty1 +[ 0.000000] Unknown kernel command line parameters "modules=loop,squashfs,sd-mod,usb-storage", will be passed to user space. +[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) +[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) +[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2062336 +[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off +[ 0.000000] software IO TLB: area num 4. +[ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB) +[ 0.000000] Memory: 8057156K/8380416K available (12608K kernel code, 2208K rwdata, 4252K rodata, 3456K init, 1073K bss, 257724K reserved, 65536K cma-reserved) +[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 +[ 0.000000] trace event string verifier disabled +[ 0.000000] rcu: Preemptible hierarchical RCU implementation. +[ 0.000000] rcu: RCU event tracing is enabled. +[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. +[ 0.000000] Trampoline variant of Tasks RCU enabled. +[ 0.000000] Tracing variant of Tasks RCU enabled. +[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. +[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 +[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 +[ 0.000000] Root IRQ handler: gic_handle_irq +[ 0.000000] GIC: Using split EOI/Deactivate mode +[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. +[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). +[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns +[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns +[ 0.000224] Console: colour dummy device 80x25 +[ 0.000229] printk: console [tty1] enabled +[ 0.000269] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) +[ 0.000276] pid_max: default: 32768 minimum: 301 +[ 0.000367] LSM: initializing lsm=capability,integrity +[ 0.000469] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) +[ 0.000501] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) +[ 0.000961] cgroup: Disabling memory control group subsystem +[ 0.001566] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. +[ 0.001616] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. +[ 0.001707] rcu: Hierarchical SRCU implementation. +[ 0.001709] rcu: Max phase no-delay instances is 1000. +[ 0.002575] EFI services will not be available. +[ 0.002705] smp: Bringing up secondary CPUs ... +[ 0.002950] Detected PIPT I-cache on CPU1 +[ 0.003005] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] +[ 0.003274] Detected PIPT I-cache on CPU2 +[ 0.003321] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] +[ 0.003591] Detected PIPT I-cache on CPU3 +[ 0.003633] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] +[ 0.003673] smp: Brought up 1 node, 4 CPUs +[ 0.003679] SMP: Total of 4 processors activated. +[ 0.003683] CPU features: detected: 32-bit EL0 Support +[ 0.003686] CPU features: detected: Data cache clean to the PoU not required for I/D coherence +[ 0.003689] CPU features: detected: Common not Private translations +[ 0.003691] CPU features: detected: CRC32 instructions +[ 0.003695] CPU features: detected: RCpc load-acquire (LDAPR) +[ 0.003697] CPU features: detected: LSE atomic instructions +[ 0.003699] CPU features: detected: Privileged Access Never +[ 0.003701] CPU features: detected: RAS Extension Support +[ 0.003705] CPU features: detected: Speculative Store Bypassing Safe (SSBS) +[ 0.003751] CPU: All CPU(s) started at EL2 +[ 0.003753] alternatives: applying system-wide alternatives +[ 0.005981] devtmpfs: initialized +[ 0.010590] Enabled cp15_barrier support +[ 0.010599] Enabled setend support +[ 0.010663] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns +[ 0.010671] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) +[ 0.011471] pinctrl core: initialized pinctrl subsystem +[ 0.011639] DMI not present or invalid. +[ 0.011842] NET: Registered PF_NETLINK/PF_ROUTE protocol family +[ 0.012435] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations +[ 0.012522] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations +[ 0.012650] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations +[ 0.012691] audit: initializing netlink subsys (disabled) +[ 0.012757] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1 +[ 0.012945] thermal_sys: Registered thermal governor 'step_wise' +[ 0.012961] cpuidle: using governor menu +[ 0.013024] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. +[ 0.013063] ASID allocator initialised with 32768 entries +[ 0.013506] Serial: AMBA PL011 UART driver +[ 0.014675] bcm2835-mbox 107c013880.mailbox: mailbox enabled +[ 0.014963] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2 +[ 0.021494] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-06-05T15:41:49, variant start_cd +[ 0.025499] raspberrypi-firmware soc:firmware: Firmware hash is 6fe0b09100000000000000000000000000000000 +[ 0.032882] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL +[ 0.032885] Modules: 0 pages in range for non-PLT usage +[ 0.032887] Modules: 518336 pages in range for PLT usage +[ 0.035616] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 +[ 0.036143] iommu: Default domain type: Translated +[ 0.036146] iommu: DMA domain TLB invalidation policy: strict mode +[ 0.036277] SCSI subsystem initialized +[ 0.036335] usbcore: registered new interface driver usbfs +[ 0.036346] usbcore: registered new interface driver hub +[ 0.036361] usbcore: registered new device driver usb +[ 0.036474] pps_core: LinuxPPS API ver. 1 registered +[ 0.036477] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti +[ 0.036483] PTP clock support registered +[ 0.036887] vgaarb: loaded +[ 0.037333] clocksource: Switched to clocksource arch_sys_counter +[ 0.037499] VFS: Disk quotas dquot_6.6.0 +[ 0.037518] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) +[ 0.037560] FS-Cache: Loaded +[ 0.041344] CacheFiles: Loaded +[ 0.043582] NET: Registered PF_INET protocol family +[ 0.043819] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) +[ 0.047349] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) +[ 0.047403] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) +[ 0.047412] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) +[ 0.047825] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) +[ 0.049578] TCP: Hash tables configured (established 65536 bind 65536) +[ 0.049754] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) +[ 0.049868] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) +[ 0.050017] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) +[ 0.050226] NET: Registered PF_UNIX/PF_LOCAL protocol family +[ 0.050451] RPC: Registered named UNIX socket transport module. +[ 0.050454] RPC: Registered udp transport module. +[ 0.050456] RPC: Registered tcp transport module. +[ 0.050458] RPC: Registered tcp-with-tls transport module. +[ 0.050460] RPC: Registered tcp NFSv4.1 backchannel transport module. +[ 0.050467] PCI: CLS 0 bytes, default 64 +[ 0.050635] Trying to unpack rootfs image as initramfs... +[ 0.057408] kvm [1]: IPA Size Limit: 40 bits +[ 0.057454] kvm [1]: vgic interrupt IRQ9 +[ 0.057476] kvm [1]: VHE mode initialized successfully +[ 0.237217] Freeing initrd memory: 6392K +[ 0.471934] Initialise system trusted keyrings +[ 0.472004] workingset: timestamp_bits=46 max_order=21 bucket_order=0 +[ 0.472032] zbud: loaded +[ 0.472445] NFS: Registering the id_resolver key type +[ 0.472453] Key type id_resolver registered +[ 0.472455] Key type id_legacy registered +[ 0.472465] nfs4filelayout_init: NFSv4 File Layout Driver Registering... +[ 0.472469] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... +[ 0.472749] Key type asymmetric registered +[ 0.472752] Asymmetric key parser 'x509' registered +[ 0.472800] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) +[ 0.472857] io scheduler mq-deadline registered +[ 0.472861] io scheduler kyber registered +[ 0.472880] io scheduler bfq registered +[ 0.473267] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 26) +[ 0.473403] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 27) +[ 0.473514] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 28) +[ 0.473625] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 29) +[ 0.477574] bcm2708_fb soc:fb: FB found 1 display(s) +[ 0.484732] Console: switching to colour frame buffer device 240x67 +[ 0.488862] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080 +[ 0.520968] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled +[ 0.522252] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 32, base_baud = 6000000) is a Broadcom BCM7271 UART +[ 0.522417] serial serial0: tty port ttyS0 registered +[ 0.523126] iproc-rng200 107d208000.rng: hwrng registered +[ 0.523319] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) +[ 0.523841] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe +[ 0.528148] brd: module loaded +[ 0.530900] loop: module loaded +[ 0.531109] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver +[ 0.531665] Loading iSCSI transport class v2.0-870. +[ 0.534906] usbcore: registered new device driver r8152-cfgselector +[ 0.534926] usbcore: registered new interface driver r8152 +[ 0.534944] usbcore: registered new interface driver lan78xx +[ 0.534957] usbcore: registered new interface driver smsc95xx +[ 0.535063] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) +[ 0.535102] dwc_otg: FIQ enabled +[ 0.535104] dwc_otg: NAK holdoff enabled +[ 0.535106] dwc_otg: FIQ split-transaction FSM enabled +[ 0.535110] Module dwc_common_port init +[ 0.535703] usbcore: registered new interface driver uas +[ 0.535718] usbcore: registered new interface driver usb-storage +[ 0.535975] mousedev: PS/2 mouse device common for all mice +[ 0.543975] rpi-rtc soc:rpi_rtc: registered as rtc0 +[ 0.545412] rpi-rtc soc:rpi_rtc: setting system clock to 1970-01-01T00:00:08 UTC (8) +[ 0.546285] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! +[ 0.546291] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer +[ 0.549082] sdhci: Secure Digital Host Controller Interface driver +[ 0.549085] sdhci: Copyright(c) Pierre Ossman +[ 0.549143] sdhci-pltfm: SDHCI platform and OF driver helper +[ 0.549615] ledtrig-cpu: registered to indicate activity on CPUs +[ 0.549698] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... +[ 0.549721] hid: raw HID events driver (C) Jiri Kosina +[ 0.549753] usbcore: registered new interface driver usbhid +[ 0.549756] usbhid: USB HID core driver +[ 0.550307] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available +[ 0.550883] Key type dns_resolver registered +[ 0.567773] registered taskstats version 1 +[ 0.567905] Loading compiled-in X.509 certificates +[ 0.571933] Key type .fscrypt registered +[ 0.571937] Key type fscrypt-provisioning registered +[ 0.572913] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: +[ 0.572926] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] +[ 0.572942] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 +[ 0.572951] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 +[ 0.572964] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 +[ 0.572971] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 +[ 0.574795] brcm-pcie 1000120000.pcie: Forcing gen 2 +[ 0.575056] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00 +[ 0.575061] pci_bus 0000:00: root bus resource [bus 00-ff] +[ 0.575067] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) +[ 0.575072] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) +[ 0.575090] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400 +[ 0.575124] pci 0000:00:00.0: PME# supported from D0 D3hot +[ 0.576411] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring +[ 0.681342] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) +[ 0.681373] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000 +[ 0.681390] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff] +[ 0.681401] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff] +[ 0.681410] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff] +[ 0.681490] pci 0000:01:00.0: supports D1 +[ 0.681493] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold +[ 0.693351] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 +[ 0.693365] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff] +[ 0.693372] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff] +[ 0.693378] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff] +[ 0.693385] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff] +[ 0.693391] pci 0000:00:00.0: PCI bridge to [bus 01] +[ 0.693395] pci 0000:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] +[ 0.693402] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 +[ 0.693412] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 +[ 0.693534] pcieport 0000:00:00.0: enabling device (0000 -> 0002) +[ 0.693591] pcieport 0000:00:00.0: PME: Signaling with IRQ 37 +[ 0.693796] pcieport 0000:00:00.0: AER: enabled with IRQ 37 +[ 0.693935] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 +[ 0.693941] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 +[ 0.693953] rp1 0000:01:00.0: enabling device (0000 -> 0002) +[ 0.695263] rp1 0000:01:00.0: chip_id 0x20001927 +[ 0.701290] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 99 +[ 0.722120] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 105 (2c:cf:67:8a:43:1d) +[ 0.722822] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels +[ 0.723212] xhci-hcd xhci-hcd.0: xHCI Host Controller +[ 0.723221] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 +[ 0.723698] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 +[ 0.723716] xhci-hcd xhci-hcd.0: irq 130, io mem 0x1f00200000 +[ 0.723805] xhci-hcd xhci-hcd.0: xHCI Host Controller +[ 0.723810] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 +[ 0.723815] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed +[ 0.724299] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 +[ 0.724306] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.724310] usb usb1: Product: xHCI Host Controller +[ 0.724313] usb usb1: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.724317] usb usb1: SerialNumber: xhci-hcd.0 +[ 0.724566] hub 1-0:1.0: USB hub found +[ 0.724584] hub 1-0:1.0: 2 ports detected +[ 0.724842] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 +[ 0.724848] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.724851] usb usb2: Product: xHCI Host Controller +[ 0.724854] usb usb2: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.724857] usb usb2: SerialNumber: xhci-hcd.0 +[ 0.725060] hub 2-0:1.0: USB hub found +[ 0.725074] hub 2-0:1.0: 1 port detected +[ 0.725788] xhci-hcd xhci-hcd.1: xHCI Host Controller +[ 0.725797] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 +[ 0.726265] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 +[ 0.726287] xhci-hcd xhci-hcd.1: irq 135, io mem 0x1f00300000 +[ 0.726377] xhci-hcd xhci-hcd.1: xHCI Host Controller +[ 0.726381] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 +[ 0.726386] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed +[ 0.726456] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 +[ 0.726460] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.726464] usb usb3: Product: xHCI Host Controller +[ 0.726467] usb usb3: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.726470] usb usb3: SerialNumber: xhci-hcd.1 +[ 0.726702] hub 3-0:1.0: USB hub found +[ 0.726719] hub 3-0:1.0: 2 ports detected +[ 0.726971] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 +[ 0.726976] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.726980] usb usb4: Product: xHCI Host Controller +[ 0.726982] usb usb4: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.726985] usb usb4: SerialNumber: xhci-hcd.1 +[ 0.727181] hub 4-0:1.0: USB hub found +[ 0.727196] hub 4-0:1.0: 1 port detected +[ 0.728420] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.728859] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu +[ 0.728867] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu +[ 0.728874] platform 1000800000.codec: Adding to iommu group 0 +[ 0.728888] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu +[ 0.728894] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu +[ 0.728900] platform 1000880000.pisp_be: Adding to iommu group 0 +[ 0.728930] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu +[ 0.728933] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu +[ 0.728941] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success +[ 0.729566] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.730015] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success +[ 0.730652] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.731096] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success +[ 0.731819] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO +[ 0.731984] mmc0: CQHCI version 5.10 +[ 0.732623] mmc1: CQHCI version 5.10 +[ 0.733498] of_cfs_init +[ 0.733538] of_cfs_init: OK +[ 0.733668] clk: Disabling unused clocks +[ 0.768846] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit +[ 0.862449] mmc0: new ultra high speed SDR104 SDHC card at address 59b4 +[ 0.862763] mmcblk0: mmc0:59b4 LX32G 29.5 GiB +[ 0.864041] mmcblk0: p1 p2 +[ 0.864197] mmcblk0: mmc0:59b4 LX32G 29.5 GiB +[ 0.917870] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit +[ 0.919987] Freeing unused kernel memory: 3456K +[ 0.920068] Run /init as init process +[ 0.920070] with arguments: +[ 0.920072] /init +[ 0.920074] with environment: +[ 0.920075] HOME=/ +[ 0.920077] TERM=linux +[ 0.920079] modules=loop,squashfs,sd-mod,usb-storage +[ 0.936143] Alpine Init 3.10.1-r0 +[ 0.937235] Loading boot drivers... +[ 0.941861] squashfs: version 4.0 (2009/01/31) Phillip Lougher +[ 0.942425] Loading boot drivers: ok. +[ 0.944532] Mounting boot media... +[ 0.956247] mmc1: new ultra high speed DDR50 SDIO card at address 0001 +[ 0.982068] usb 3-1: new low-speed USB device number 2 using xhci-hcd +[ 1.172715] usb 3-1: New USB device found, idVendor=046d, idProduct=c313, bcdDevice= 1.01 +[ 1.172727] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 +[ 1.172732] usb 3-1: Product: USB Multimedia Keyboard +[ 1.172736] usb 3-1: Manufacturer: LITEON Technology +[ 1.254607] input: LITEON Technology USB Multimedia Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1:1.0/0003:046D:C313.0001/input/input0 +[ 1.313523] hid-generic 0003:046D:C313.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-xhci-hcd.1-1/input0 +[ 1.318492] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs +[ 1.319717] EXT4-fs (mmcblk0p2): mounted filesystem e279b314-51dd-4303-99f6-e6dd3d0fa0ee ro with ordered data mode. Quota mode: none. +[ 1.337475] input: LITEON Technology USB Multimedia Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1:1.1/0003:046D:C313.0002/input/input1 +[ 1.358348] Mounting boot media: ok. +[ 1.360513] Loading user settings from /media/mmcblk0p1/localhost.apkovl.tar.gz... +[ 1.375753] Loading user settings from /media/mmcblk0p1/localhost.apkovl.tar.gz: ok. +[ 1.401595] hid-generic 0003:046D:C313.0002: input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-xhci-hcd.1-1/input1 +[ 1.737937] Installing packages to root filesystem... +[ 6.940787] Installing packages to root filesystem: ok. +[ 7.737377] loop0: detected capacity change from 0 to 61016 +[ 7.739654] F2FS-fs (loop0): Magic Mismatch, valid(0xf2f52010) - read(0x8eeb746f) +[ 7.739663] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock +[ 7.739687] F2FS-fs (loop0): Magic Mismatch, valid(0xf2f52010) - read(0xfde4274) +[ 7.739691] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock +[ 8.718581] Bluetooth: Core ver 2.22 +[ 8.718623] NET: Registered PF_BLUETOOTH protocol family +[ 8.718626] Bluetooth: HCI device and connection manager initialized +[ 8.718635] Bluetooth: HCI socket layer initialized +[ 8.718639] Bluetooth: L2CAP socket layer initialized +[ 8.718646] Bluetooth: SCO socket layer initialized +[ 8.732107] Bluetooth: HCI UART driver ver 2.3 +[ 8.732116] Bluetooth: HCI UART protocol H4 registered +[ 8.732152] Bluetooth: HCI UART protocol Three-wire (H5) registered +[ 8.732242] Bluetooth: HCI UART protocol Broadcom registered +[ 8.732379] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator +[ 8.732444] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator +[ 8.980868] mc: Linux media interface: v0.10 +[ 9.013628] videodev: Linux video capture interface: v2.00 +[ 9.033787] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. +[ 9.034524] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu +[ 9.035825] rpivid 1000800000.codec: Device registered as /dev/video19 +[ 9.045506] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 +[ 9.045696] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 +[ 9.045854] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 +[ 9.050284] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 +[ 9.050362] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 +[ 9.051125] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 +[ 9.051191] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 +[ 9.054018] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 +[ 9.054172] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 +[ 9.057367] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 +[ 9.078855] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu +[ 9.082071] pispbe 1000880000.pisp_be: Runtime PM usage count underflow! +[ 9.093746] input: pwr_button as /devices/platform/pwr_button/input/input2 +[ 9.097224] Bluetooth: hci0: BCM: chip id 107 +[ 9.097910] Bluetooth: hci0: BCM: features 0x2f +[ 9.099046] Bluetooth: hci0: BCM4345C0 +[ 9.099053] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 +[ 9.130865] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch +[ 9.225813] cfg80211: Loading compiled-in X.509 certificates for regulatory database +[ 9.257089] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' +[ 9.257666] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' +[ 9.258175] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' +[ 9.258626] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' +[ 9.333794] brcmfmac: F1 signature read @0x18000000=0x15264345 +[ 9.335762] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 +[ 9.335949] usbcore: registered new interface driver brcmfmac +[ 9.575071] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) +[ 9.575345] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2 +[ 9.878005] Bluetooth: hci0: BCM: features 0x2f +[ 9.879391] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190 +[ 9.879395] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382 +[ 9.879738] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac) +[ 9.914421] NET: Registered PF_PACKET protocol family +[ 9.981472] NET: Registered PF_INET6 protocol family +[ 9.982025] Segment Routing with IPv6 +[ 9.982037] In-situ OAM (IOAM) with IPv6 +[ 10.118507] EXT4-fs (mmcblk0p2): re-mounted e279b314-51dd-4303-99f6-e6dd3d0fa0ee r/w. Quota mode: none. diff --git a/experiment-setup/kernel_logs/ruby-sinatra/ruby-sinatra-kernel-logs.txt b/experiment-setup/kernel_logs/ruby-sinatra/ruby-sinatra-kernel-logs.txt new file mode 100644 index 00000000..2809551a --- /dev/null +++ b/experiment-setup/kernel_logs/ruby-sinatra/ruby-sinatra-kernel-logs.txt @@ -0,0 +1,418 @@ +[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] +[ 0.000000] Linux version 6.6.49-0-rpi (buildozer@build-3-20-aarch64) (gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #1-Alpine SMP PREEMPT Thu Sep 5 10:58:11 UTC 2024 +[ 0.000000] KASLR enabled +[ 0.000000] random: crng init done +[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 +[ 0.000000] efi: UEFI not found. +[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000001c00000, size 64 MiB +[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool +[ 0.000000] OF: reserved mem: 0x0000000001c00000..0x0000000005bfffff (65536 KiB) map reusable linux,cma +[ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0 +[ 0.000000] OF: reserved mem: 0x000000003fd16200..0x000000003fd16237 (0 KiB) nomap non-reusable nvram@0 +[ 0.000000] Zone ranges: +[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] +[ 0.000000] DMA32 empty +[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] +[ 0.000000] Movable zone start for each node +[ 0.000000] Early memory node ranges +[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] +[ 0.000000] node 0: [mem 0x0000000000080000-0x000000003f7fffff] +[ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff] +[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] +[ 0.000000] On node 0, zone DMA: 2048 pages in unavailable ranges +[ 0.000000] psci: probing for conduit method from DT. +[ 0.000000] psci: PSCIv1.1 detected in firmware. +[ 0.000000] psci: Using standard PSCI v0.2 function IDs +[ 0.000000] psci: MIGRATE_INFO_TYPE not supported. +[ 0.000000] psci: SMC Calling Convention v1.2 +[ 0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880 +[ 0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096 +[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 +[ 0.000000] Detected PIPT I-cache on CPU0 +[ 0.000000] CPU features: detected: Virtualization Host Extensions +[ 0.000000] CPU features: detected: Hardware dirty bit management +[ 0.000000] CPU features: detected: Spectre-v4 +[ 0.000000] CPU features: detected: Spectre-BHB +[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR +[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) +[ 0.000000] CPU features: detected: SSBS not fully self-synchronizing +[ 0.000000] alternatives: applying boot alternatives +[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=2C:CF:67:8A:43:1D vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 modules=loop,squashfs,sd-mod,usb-storage quiet console=tty1 +[ 0.000000] Unknown kernel command line parameters "modules=loop,squashfs,sd-mod,usb-storage", will be passed to user space. +[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) +[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) +[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2062336 +[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off +[ 0.000000] software IO TLB: area num 4. +[ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB) +[ 0.000000] Memory: 8057156K/8380416K available (12608K kernel code, 2208K rwdata, 4252K rodata, 3456K init, 1073K bss, 257724K reserved, 65536K cma-reserved) +[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 +[ 0.000000] trace event string verifier disabled +[ 0.000000] rcu: Preemptible hierarchical RCU implementation. +[ 0.000000] rcu: RCU event tracing is enabled. +[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. +[ 0.000000] Trampoline variant of Tasks RCU enabled. +[ 0.000000] Tracing variant of Tasks RCU enabled. +[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. +[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 +[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 +[ 0.000000] Root IRQ handler: gic_handle_irq +[ 0.000000] GIC: Using split EOI/Deactivate mode +[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. +[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). +[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns +[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns +[ 0.000228] Console: colour dummy device 80x25 +[ 0.000234] printk: console [tty1] enabled +[ 0.000276] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) +[ 0.000282] pid_max: default: 32768 minimum: 301 +[ 0.000370] LSM: initializing lsm=capability,integrity +[ 0.000476] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) +[ 0.000516] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) +[ 0.001011] cgroup: Disabling memory control group subsystem +[ 0.001710] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. +[ 0.001761] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. +[ 0.001861] rcu: Hierarchical SRCU implementation. +[ 0.001863] rcu: Max phase no-delay instances is 1000. +[ 0.002718] EFI services will not be available. +[ 0.002828] smp: Bringing up secondary CPUs ... +[ 0.003073] Detected PIPT I-cache on CPU1 +[ 0.003123] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] +[ 0.003370] Detected PIPT I-cache on CPU2 +[ 0.003417] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] +[ 0.003668] Detected PIPT I-cache on CPU3 +[ 0.003710] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] +[ 0.003747] smp: Brought up 1 node, 4 CPUs +[ 0.003753] SMP: Total of 4 processors activated. +[ 0.003757] CPU features: detected: 32-bit EL0 Support +[ 0.003760] CPU features: detected: Data cache clean to the PoU not required for I/D coherence +[ 0.003763] CPU features: detected: Common not Private translations +[ 0.003765] CPU features: detected: CRC32 instructions +[ 0.003768] CPU features: detected: RCpc load-acquire (LDAPR) +[ 0.003770] CPU features: detected: LSE atomic instructions +[ 0.003773] CPU features: detected: Privileged Access Never +[ 0.003775] CPU features: detected: RAS Extension Support +[ 0.003779] CPU features: detected: Speculative Store Bypassing Safe (SSBS) +[ 0.003823] CPU: All CPU(s) started at EL2 +[ 0.003825] alternatives: applying system-wide alternatives +[ 0.006082] devtmpfs: initialized +[ 0.010622] Enabled cp15_barrier support +[ 0.010631] Enabled setend support +[ 0.010692] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns +[ 0.010700] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) +[ 0.011462] pinctrl core: initialized pinctrl subsystem +[ 0.011632] DMI not present or invalid. +[ 0.011832] NET: Registered PF_NETLINK/PF_ROUTE protocol family +[ 0.012415] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations +[ 0.012502] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations +[ 0.012630] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations +[ 0.012672] audit: initializing netlink subsys (disabled) +[ 0.012737] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1 +[ 0.012921] thermal_sys: Registered thermal governor 'step_wise' +[ 0.012936] cpuidle: using governor menu +[ 0.012999] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. +[ 0.013037] ASID allocator initialised with 32768 entries +[ 0.013475] Serial: AMBA PL011 UART driver +[ 0.014636] bcm2835-mbox 107c013880.mailbox: mailbox enabled +[ 0.014926] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2 +[ 0.021460] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-06-05T15:41:49, variant start_cd +[ 0.025457] raspberrypi-firmware soc:firmware: Firmware hash is 6fe0b09100000000000000000000000000000000 +[ 0.032836] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL +[ 0.032839] Modules: 0 pages in range for non-PLT usage +[ 0.032841] Modules: 518336 pages in range for PLT usage +[ 0.035729] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 +[ 0.036259] iommu: Default domain type: Translated +[ 0.036263] iommu: DMA domain TLB invalidation policy: strict mode +[ 0.036393] SCSI subsystem initialized +[ 0.036451] usbcore: registered new interface driver usbfs +[ 0.036464] usbcore: registered new interface driver hub +[ 0.036478] usbcore: registered new device driver usb +[ 0.036594] pps_core: LinuxPPS API ver. 1 registered +[ 0.036596] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti +[ 0.036602] PTP clock support registered +[ 0.036996] vgaarb: loaded +[ 0.037454] clocksource: Switched to clocksource arch_sys_counter +[ 0.470998] VFS: Disk quotas dquot_6.6.0 +[ 0.471018] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) +[ 0.471058] FS-Cache: Loaded +[ 0.471120] CacheFiles: Loaded +[ 0.473492] NET: Registered PF_INET protocol family +[ 0.473734] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) +[ 0.477283] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) +[ 0.477338] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) +[ 0.477347] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) +[ 0.477767] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) +[ 0.479488] TCP: Hash tables configured (established 65536 bind 65536) +[ 0.479662] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) +[ 0.479785] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) +[ 0.479933] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) +[ 0.480139] NET: Registered PF_UNIX/PF_LOCAL protocol family +[ 0.480368] RPC: Registered named UNIX socket transport module. +[ 0.480371] RPC: Registered udp transport module. +[ 0.480373] RPC: Registered tcp transport module. +[ 0.480375] RPC: Registered tcp-with-tls transport module. +[ 0.480377] RPC: Registered tcp NFSv4.1 backchannel transport module. +[ 0.480384] PCI: CLS 0 bytes, default 64 +[ 0.480554] Trying to unpack rootfs image as initramfs... +[ 0.485545] kvm [1]: IPA Size Limit: 40 bits +[ 0.485586] kvm [1]: vgic interrupt IRQ9 +[ 0.485614] kvm [1]: VHE mode initialized successfully +[ 0.486215] Initialise system trusted keyrings +[ 0.486700] workingset: timestamp_bits=46 max_order=21 bucket_order=0 +[ 0.486723] zbud: loaded +[ 0.487127] NFS: Registering the id_resolver key type +[ 0.487136] Key type id_resolver registered +[ 0.487139] Key type id_legacy registered +[ 0.487148] nfs4filelayout_init: NFSv4 File Layout Driver Registering... +[ 0.487151] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... +[ 0.487429] Key type asymmetric registered +[ 0.487433] Asymmetric key parser 'x509' registered +[ 0.487484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) +[ 0.487537] io scheduler mq-deadline registered +[ 0.487540] io scheduler kyber registered +[ 0.487559] io scheduler bfq registered +[ 0.487938] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 26) +[ 0.488069] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 27) +[ 0.488172] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 28) +[ 0.488273] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 29) +[ 0.491895] bcm2708_fb soc:fb: FB found 1 display(s) +[ 0.499086] Console: switching to colour frame buffer device 240x67 +[ 0.503279] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080 +[ 0.535399] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled +[ 0.536584] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 32, base_baud = 6000000) is a Broadcom BCM7271 UART +[ 0.536675] serial serial0: tty port ttyS0 registered +[ 0.537637] iproc-rng200 107d208000.rng: hwrng registered +[ 0.537834] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) +[ 0.538350] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe +[ 0.542878] brd: module loaded +[ 0.545715] loop: module loaded +[ 0.545941] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver +[ 0.546436] Loading iSCSI transport class v2.0-870. +[ 0.548399] usbcore: registered new device driver r8152-cfgselector +[ 0.548415] usbcore: registered new interface driver r8152 +[ 0.548428] usbcore: registered new interface driver lan78xx +[ 0.548440] usbcore: registered new interface driver smsc95xx +[ 0.548517] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) +[ 0.548551] dwc_otg: FIQ enabled +[ 0.548553] dwc_otg: NAK holdoff enabled +[ 0.548556] dwc_otg: FIQ split-transaction FSM enabled +[ 0.548559] Module dwc_common_port init +[ 0.551335] usbcore: registered new interface driver uas +[ 0.551354] usbcore: registered new interface driver usb-storage +[ 0.551763] mousedev: PS/2 mouse device common for all mice +[ 0.559767] rpi-rtc soc:rpi_rtc: registered as rtc0 +[ 0.561212] rpi-rtc soc:rpi_rtc: setting system clock to 1970-01-01T00:00:08 UTC (8) +[ 0.562179] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! +[ 0.562185] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer +[ 0.565143] sdhci: Secure Digital Host Controller Interface driver +[ 0.565147] sdhci: Copyright(c) Pierre Ossman +[ 0.565244] sdhci-pltfm: SDHCI platform and OF driver helper +[ 0.566541] ledtrig-cpu: registered to indicate activity on CPUs +[ 0.566718] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... +[ 0.566748] hid: raw HID events driver (C) Jiri Kosina +[ 0.566794] usbcore: registered new interface driver usbhid +[ 0.566797] usbhid: USB HID core driver +[ 0.567480] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available +[ 0.568097] Key type dns_resolver registered +[ 0.586273] registered taskstats version 1 +[ 0.586374] Loading compiled-in X.509 certificates +[ 0.590364] Key type .fscrypt registered +[ 0.590369] Key type fscrypt-provisioning registered +[ 0.591944] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: +[ 0.591956] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] +[ 0.591972] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 +[ 0.591982] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 +[ 0.591995] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 +[ 0.592002] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 +[ 0.597186] brcm-pcie 1000120000.pcie: Forcing gen 2 +[ 0.597502] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00 +[ 0.597509] pci_bus 0000:00: root bus resource [bus 00-ff] +[ 0.597516] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) +[ 0.597521] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) +[ 0.597540] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400 +[ 0.597575] pci 0000:00:00.0: PME# supported from D0 D3hot +[ 0.598896] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring +[ 0.674876] Freeing initrd memory: 6392K +[ 0.709468] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) +[ 0.709503] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000 +[ 0.709521] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff] +[ 0.709532] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff] +[ 0.709540] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff] +[ 0.709622] pci 0000:01:00.0: supports D1 +[ 0.709625] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold +[ 0.721468] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 +[ 0.721483] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff] +[ 0.721490] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff] +[ 0.721496] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff] +[ 0.721503] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff] +[ 0.721509] pci 0000:00:00.0: PCI bridge to [bus 01] +[ 0.721513] pci 0000:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] +[ 0.721520] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 +[ 0.721531] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 +[ 0.721650] pcieport 0000:00:00.0: enabling device (0000 -> 0002) +[ 0.721709] pcieport 0000:00:00.0: PME: Signaling with IRQ 37 +[ 0.721910] pcieport 0000:00:00.0: AER: enabled with IRQ 37 +[ 0.722047] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 +[ 0.722053] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 +[ 0.722064] rp1 0000:01:00.0: enabling device (0000 -> 0002) +[ 0.723321] rp1 0000:01:00.0: chip_id 0x20001927 +[ 0.729422] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 99 +[ 0.754238] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 105 (2c:cf:67:8a:43:1d) +[ 0.755694] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels +[ 0.756078] xhci-hcd xhci-hcd.0: xHCI Host Controller +[ 0.756087] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 +[ 0.756562] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 +[ 0.756580] xhci-hcd xhci-hcd.0: irq 130, io mem 0x1f00200000 +[ 0.756669] xhci-hcd xhci-hcd.0: xHCI Host Controller +[ 0.756673] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 +[ 0.756678] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed +[ 0.757051] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 +[ 0.757058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.757062] usb usb1: Product: xHCI Host Controller +[ 0.757065] usb usb1: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.757068] usb usb1: SerialNumber: xhci-hcd.0 +[ 0.757288] hub 1-0:1.0: USB hub found +[ 0.757322] hub 1-0:1.0: 2 ports detected +[ 0.757611] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 +[ 0.757617] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.757621] usb usb2: Product: xHCI Host Controller +[ 0.757624] usb usb2: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.757627] usb usb2: SerialNumber: xhci-hcd.0 +[ 0.757776] hub 2-0:1.0: USB hub found +[ 0.757838] hub 2-0:1.0: 1 port detected +[ 0.758316] xhci-hcd xhci-hcd.1: xHCI Host Controller +[ 0.758324] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 +[ 0.758790] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 +[ 0.758808] xhci-hcd xhci-hcd.1: irq 135, io mem 0x1f00300000 +[ 0.758897] xhci-hcd xhci-hcd.1: xHCI Host Controller +[ 0.758902] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 +[ 0.758906] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed +[ 0.759140] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 +[ 0.759145] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.759149] usb usb3: Product: xHCI Host Controller +[ 0.759152] usb usb3: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.759155] usb usb3: SerialNumber: xhci-hcd.1 +[ 0.759342] hub 3-0:1.0: USB hub found +[ 0.759384] hub 3-0:1.0: 2 ports detected +[ 0.759623] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 +[ 0.759628] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.759632] usb usb4: Product: xHCI Host Controller +[ 0.759635] usb usb4: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.759638] usb usb4: SerialNumber: xhci-hcd.1 +[ 0.759816] hub 4-0:1.0: USB hub found +[ 0.759852] hub 4-0:1.0: 1 port detected +[ 0.760966] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.761402] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu +[ 0.761409] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu +[ 0.761415] platform 1000800000.codec: Adding to iommu group 0 +[ 0.761429] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu +[ 0.761435] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu +[ 0.761441] platform 1000880000.pisp_be: Adding to iommu group 0 +[ 0.761488] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu +[ 0.761492] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu +[ 0.761499] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success +[ 0.762064] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.762491] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success +[ 0.763156] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.763586] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success +[ 0.764881] of_cfs_init +[ 0.764915] of_cfs_init: OK +[ 0.765058] clk: Disabling unused clocks +[ 0.765447] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO +[ 0.774701] mmc0: CQHCI version 5.10 +[ 0.774764] mmc1: CQHCI version 5.10 +[ 0.809470] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit +[ 0.902847] mmc0: new ultra high speed SDR104 SDHC card at address 59b4 +[ 0.903150] mmcblk0: mmc0:59b4 LX32G 29.5 GiB +[ 0.904401] mmcblk0: p1 p2 +[ 0.904597] mmcblk0: mmc0:59b4 LX32G 29.5 GiB +[ 0.964010] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit +[ 0.966238] Freeing unused kernel memory: 3456K +[ 0.966316] Run /init as init process +[ 0.966318] with arguments: +[ 0.966320] /init +[ 0.966321] with environment: +[ 0.966323] HOME=/ +[ 0.966325] TERM=linux +[ 0.966326] modules=loop,squashfs,sd-mod,usb-storage +[ 0.982337] Alpine Init 3.10.1-r0 +[ 0.983421] Loading boot drivers... +[ 0.988105] squashfs: version 4.0 (2009/01/31) Phillip Lougher +[ 0.988632] Loading boot drivers: ok. +[ 0.990779] Mounting boot media... +[ 1.003792] mmc1: new ultra high speed DDR50 SDIO card at address 0001 +[ 1.017768] usb 3-1: new low-speed USB device number 2 using xhci-hcd +[ 1.206965] usb 3-1: New USB device found, idVendor=046d, idProduct=c313, bcdDevice= 1.01 +[ 1.206976] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 +[ 1.206981] usb 3-1: Product: USB Multimedia Keyboard +[ 1.206985] usb 3-1: Manufacturer: LITEON Technology +[ 1.287102] input: LITEON Technology USB Multimedia Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1:1.0/0003:046D:C313.0001/input/input0 +[ 1.345637] hid-generic 0003:046D:C313.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-xhci-hcd.1-1/input0 +[ 1.366975] input: LITEON Technology USB Multimedia Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1:1.1/0003:046D:C313.0002/input/input1 +[ 1.370548] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs +[ 1.371754] EXT4-fs (mmcblk0p2): mounted filesystem e279b314-51dd-4303-99f6-e6dd3d0fa0ee ro with ordered data mode. Quota mode: none. +[ 1.404161] Mounting boot media: ok. +[ 1.406304] Loading user settings from /media/mmcblk0p1/localhost.apkovl.tar.gz... +[ 1.422352] Loading user settings from /media/mmcblk0p1/localhost.apkovl.tar.gz: ok. +[ 1.425842] hid-generic 0003:046D:C313.0002: input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-xhci-hcd.1-1/input1 +[ 1.784332] Installing packages to root filesystem... +[ 6.993285] Installing packages to root filesystem: ok. +[ 7.791302] loop0: detected capacity change from 0 to 61016 +[ 7.793573] F2FS-fs (loop0): Magic Mismatch, valid(0xf2f52010) - read(0x8eeb746f) +[ 7.793582] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock +[ 7.793601] F2FS-fs (loop0): Magic Mismatch, valid(0xf2f52010) - read(0xfde4274) +[ 7.793605] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock +[ 8.769953] Bluetooth: Core ver 2.22 +[ 8.770050] NET: Registered PF_BLUETOOTH protocol family +[ 8.770054] Bluetooth: HCI device and connection manager initialized +[ 8.770063] Bluetooth: HCI socket layer initialized +[ 8.770067] Bluetooth: L2CAP socket layer initialized +[ 8.770074] Bluetooth: SCO socket layer initialized +[ 8.783485] Bluetooth: HCI UART driver ver 2.3 +[ 8.783494] Bluetooth: HCI UART protocol H4 registered +[ 8.783564] Bluetooth: HCI UART protocol Three-wire (H5) registered +[ 8.783669] Bluetooth: HCI UART protocol Broadcom registered +[ 8.783759] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator +[ 8.783826] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator +[ 9.032037] mc: Linux media interface: v0.10 +[ 9.064354] videodev: Linux video capture interface: v2.00 +[ 9.084537] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. +[ 9.085249] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu +[ 9.086528] rpivid 1000800000.codec: Device registered as /dev/video19 +[ 9.096716] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 +[ 9.096892] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 +[ 9.096982] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 +[ 9.101589] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 +[ 9.101698] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 +[ 9.102379] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 +[ 9.102458] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 +[ 9.107966] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 +[ 9.108129] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 +[ 9.108236] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 +[ 9.129357] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu +[ 9.145491] Bluetooth: hci0: BCM: chip id 107 +[ 9.146503] Bluetooth: hci0: BCM: features 0x2f +[ 9.148084] Bluetooth: hci0: BCM4345C0 +[ 9.148089] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 +[ 9.149435] pispbe 1000880000.pisp_be: Runtime PM usage count underflow! +[ 9.170388] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch +[ 9.176868] input: pwr_button as /devices/platform/pwr_button/input/input2 +[ 9.285770] cfg80211: Loading compiled-in X.509 certificates for regulatory database +[ 9.317041] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' +[ 9.317568] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' +[ 9.318081] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' +[ 9.318595] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' +[ 9.390422] brcmfmac: F1 signature read @0x18000000=0x15264345 +[ 9.392041] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 +[ 9.393210] usbcore: registered new interface driver brcmfmac +[ 9.632625] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) +[ 9.632888] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2 +[ 9.926355] NET: Registered PF_PACKET protocol family +[ 9.974122] Bluetooth: hci0: BCM: features 0x2f +[ 9.975553] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190 +[ 9.975558] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382 +[ 9.975856] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac) +[ 9.993422] NET: Registered PF_INET6 protocol family +[ 9.993959] Segment Routing with IPv6 +[ 9.993971] In-situ OAM (IOAM) with IPv6 +[ 10.146581] EXT4-fs (mmcblk0p2): re-mounted e279b314-51dd-4303-99f6-e6dd3d0fa0ee r/w. Quota mode: none. diff --git a/experiment-setup/kernel_logs/rust-actix/rust-actix-kernel-logs.txt b/experiment-setup/kernel_logs/rust-actix/rust-actix-kernel-logs.txt new file mode 100644 index 00000000..dec3aa21 --- /dev/null +++ b/experiment-setup/kernel_logs/rust-actix/rust-actix-kernel-logs.txt @@ -0,0 +1,418 @@ +[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] +[ 0.000000] Linux version 6.6.49-0-rpi (buildozer@build-3-20-aarch64) (gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #1-Alpine SMP PREEMPT Thu Sep 5 10:58:11 UTC 2024 +[ 0.000000] KASLR enabled +[ 0.000000] random: crng init done +[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 +[ 0.000000] efi: UEFI not found. +[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000001c00000, size 64 MiB +[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool +[ 0.000000] OF: reserved mem: 0x0000000001c00000..0x0000000005bfffff (65536 KiB) map reusable linux,cma +[ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0 +[ 0.000000] OF: reserved mem: 0x000000003fd16200..0x000000003fd16237 (0 KiB) nomap non-reusable nvram@0 +[ 0.000000] Zone ranges: +[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] +[ 0.000000] DMA32 empty +[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] +[ 0.000000] Movable zone start for each node +[ 0.000000] Early memory node ranges +[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] +[ 0.000000] node 0: [mem 0x0000000000080000-0x000000003f7fffff] +[ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff] +[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] +[ 0.000000] On node 0, zone DMA: 2048 pages in unavailable ranges +[ 0.000000] psci: probing for conduit method from DT. +[ 0.000000] psci: PSCIv1.1 detected in firmware. +[ 0.000000] psci: Using standard PSCI v0.2 function IDs +[ 0.000000] psci: MIGRATE_INFO_TYPE not supported. +[ 0.000000] psci: SMC Calling Convention v1.2 +[ 0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880 +[ 0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096 +[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 +[ 0.000000] Detected PIPT I-cache on CPU0 +[ 0.000000] CPU features: detected: Virtualization Host Extensions +[ 0.000000] CPU features: detected: Hardware dirty bit management +[ 0.000000] CPU features: detected: Spectre-v4 +[ 0.000000] CPU features: detected: Spectre-BHB +[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR +[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) +[ 0.000000] CPU features: detected: SSBS not fully self-synchronizing +[ 0.000000] alternatives: applying boot alternatives +[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=2C:CF:67:8A:43:1D vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 modules=loop,squashfs,sd-mod,usb-storage quiet console=tty1 +[ 0.000000] Unknown kernel command line parameters "modules=loop,squashfs,sd-mod,usb-storage", will be passed to user space. +[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) +[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) +[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2062336 +[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off +[ 0.000000] software IO TLB: area num 4. +[ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB) +[ 0.000000] Memory: 8057156K/8380416K available (12608K kernel code, 2208K rwdata, 4252K rodata, 3456K init, 1073K bss, 257724K reserved, 65536K cma-reserved) +[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 +[ 0.000000] trace event string verifier disabled +[ 0.000000] rcu: Preemptible hierarchical RCU implementation. +[ 0.000000] rcu: RCU event tracing is enabled. +[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. +[ 0.000000] Trampoline variant of Tasks RCU enabled. +[ 0.000000] Tracing variant of Tasks RCU enabled. +[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. +[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 +[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 +[ 0.000000] Root IRQ handler: gic_handle_irq +[ 0.000000] GIC: Using split EOI/Deactivate mode +[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. +[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). +[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns +[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns +[ 0.000224] Console: colour dummy device 80x25 +[ 0.000229] printk: console [tty1] enabled +[ 0.000269] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) +[ 0.000276] pid_max: default: 32768 minimum: 301 +[ 0.000367] LSM: initializing lsm=capability,integrity +[ 0.000469] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) +[ 0.000501] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) +[ 0.000961] cgroup: Disabling memory control group subsystem +[ 0.001566] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. +[ 0.001616] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. +[ 0.001707] rcu: Hierarchical SRCU implementation. +[ 0.001709] rcu: Max phase no-delay instances is 1000. +[ 0.002575] EFI services will not be available. +[ 0.002705] smp: Bringing up secondary CPUs ... +[ 0.002950] Detected PIPT I-cache on CPU1 +[ 0.003005] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] +[ 0.003274] Detected PIPT I-cache on CPU2 +[ 0.003321] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] +[ 0.003591] Detected PIPT I-cache on CPU3 +[ 0.003633] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] +[ 0.003673] smp: Brought up 1 node, 4 CPUs +[ 0.003679] SMP: Total of 4 processors activated. +[ 0.003683] CPU features: detected: 32-bit EL0 Support +[ 0.003686] CPU features: detected: Data cache clean to the PoU not required for I/D coherence +[ 0.003689] CPU features: detected: Common not Private translations +[ 0.003691] CPU features: detected: CRC32 instructions +[ 0.003695] CPU features: detected: RCpc load-acquire (LDAPR) +[ 0.003697] CPU features: detected: LSE atomic instructions +[ 0.003699] CPU features: detected: Privileged Access Never +[ 0.003701] CPU features: detected: RAS Extension Support +[ 0.003705] CPU features: detected: Speculative Store Bypassing Safe (SSBS) +[ 0.003751] CPU: All CPU(s) started at EL2 +[ 0.003753] alternatives: applying system-wide alternatives +[ 0.005981] devtmpfs: initialized +[ 0.010590] Enabled cp15_barrier support +[ 0.010599] Enabled setend support +[ 0.010663] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns +[ 0.010671] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) +[ 0.011471] pinctrl core: initialized pinctrl subsystem +[ 0.011639] DMI not present or invalid. +[ 0.011842] NET: Registered PF_NETLINK/PF_ROUTE protocol family +[ 0.012435] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations +[ 0.012522] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations +[ 0.012650] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations +[ 0.012691] audit: initializing netlink subsys (disabled) +[ 0.012757] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1 +[ 0.012945] thermal_sys: Registered thermal governor 'step_wise' +[ 0.012961] cpuidle: using governor menu +[ 0.013024] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. +[ 0.013063] ASID allocator initialised with 32768 entries +[ 0.013506] Serial: AMBA PL011 UART driver +[ 0.014675] bcm2835-mbox 107c013880.mailbox: mailbox enabled +[ 0.014963] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2 +[ 0.021494] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-06-05T15:41:49, variant start_cd +[ 0.025499] raspberrypi-firmware soc:firmware: Firmware hash is 6fe0b09100000000000000000000000000000000 +[ 0.032882] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL +[ 0.032885] Modules: 0 pages in range for non-PLT usage +[ 0.032887] Modules: 518336 pages in range for PLT usage +[ 0.035616] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 +[ 0.036143] iommu: Default domain type: Translated +[ 0.036146] iommu: DMA domain TLB invalidation policy: strict mode +[ 0.036277] SCSI subsystem initialized +[ 0.036335] usbcore: registered new interface driver usbfs +[ 0.036346] usbcore: registered new interface driver hub +[ 0.036361] usbcore: registered new device driver usb +[ 0.036474] pps_core: LinuxPPS API ver. 1 registered +[ 0.036477] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti +[ 0.036483] PTP clock support registered +[ 0.036887] vgaarb: loaded +[ 0.037333] clocksource: Switched to clocksource arch_sys_counter +[ 0.037499] VFS: Disk quotas dquot_6.6.0 +[ 0.037518] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) +[ 0.037560] FS-Cache: Loaded +[ 0.041344] CacheFiles: Loaded +[ 0.043582] NET: Registered PF_INET protocol family +[ 0.043819] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) +[ 0.047349] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) +[ 0.047403] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) +[ 0.047412] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) +[ 0.047825] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) +[ 0.049578] TCP: Hash tables configured (established 65536 bind 65536) +[ 0.049754] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) +[ 0.049868] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) +[ 0.050017] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) +[ 0.050226] NET: Registered PF_UNIX/PF_LOCAL protocol family +[ 0.050451] RPC: Registered named UNIX socket transport module. +[ 0.050454] RPC: Registered udp transport module. +[ 0.050456] RPC: Registered tcp transport module. +[ 0.050458] RPC: Registered tcp-with-tls transport module. +[ 0.050460] RPC: Registered tcp NFSv4.1 backchannel transport module. +[ 0.050467] PCI: CLS 0 bytes, default 64 +[ 0.050635] Trying to unpack rootfs image as initramfs... +[ 0.057408] kvm [1]: IPA Size Limit: 40 bits +[ 0.057454] kvm [1]: vgic interrupt IRQ9 +[ 0.057476] kvm [1]: VHE mode initialized successfully +[ 0.237217] Freeing initrd memory: 6392K +[ 0.471934] Initialise system trusted keyrings +[ 0.472004] workingset: timestamp_bits=46 max_order=21 bucket_order=0 +[ 0.472032] zbud: loaded +[ 0.472445] NFS: Registering the id_resolver key type +[ 0.472453] Key type id_resolver registered +[ 0.472455] Key type id_legacy registered +[ 0.472465] nfs4filelayout_init: NFSv4 File Layout Driver Registering... +[ 0.472469] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... +[ 0.472749] Key type asymmetric registered +[ 0.472752] Asymmetric key parser 'x509' registered +[ 0.472800] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) +[ 0.472857] io scheduler mq-deadline registered +[ 0.472861] io scheduler kyber registered +[ 0.472880] io scheduler bfq registered +[ 0.473267] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 26) +[ 0.473403] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 27) +[ 0.473514] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 28) +[ 0.473625] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 29) +[ 0.477574] bcm2708_fb soc:fb: FB found 1 display(s) +[ 0.484732] Console: switching to colour frame buffer device 240x67 +[ 0.488862] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080 +[ 0.520968] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled +[ 0.522252] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 32, base_baud = 6000000) is a Broadcom BCM7271 UART +[ 0.522417] serial serial0: tty port ttyS0 registered +[ 0.523126] iproc-rng200 107d208000.rng: hwrng registered +[ 0.523319] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) +[ 0.523841] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe +[ 0.528148] brd: module loaded +[ 0.530900] loop: module loaded +[ 0.531109] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver +[ 0.531665] Loading iSCSI transport class v2.0-870. +[ 0.534906] usbcore: registered new device driver r8152-cfgselector +[ 0.534926] usbcore: registered new interface driver r8152 +[ 0.534944] usbcore: registered new interface driver lan78xx +[ 0.534957] usbcore: registered new interface driver smsc95xx +[ 0.535063] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) +[ 0.535102] dwc_otg: FIQ enabled +[ 0.535104] dwc_otg: NAK holdoff enabled +[ 0.535106] dwc_otg: FIQ split-transaction FSM enabled +[ 0.535110] Module dwc_common_port init +[ 0.535703] usbcore: registered new interface driver uas +[ 0.535718] usbcore: registered new interface driver usb-storage +[ 0.535975] mousedev: PS/2 mouse device common for all mice +[ 0.543975] rpi-rtc soc:rpi_rtc: registered as rtc0 +[ 0.545412] rpi-rtc soc:rpi_rtc: setting system clock to 1970-01-01T00:00:08 UTC (8) +[ 0.546285] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! +[ 0.546291] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer +[ 0.549082] sdhci: Secure Digital Host Controller Interface driver +[ 0.549085] sdhci: Copyright(c) Pierre Ossman +[ 0.549143] sdhci-pltfm: SDHCI platform and OF driver helper +[ 0.549615] ledtrig-cpu: registered to indicate activity on CPUs +[ 0.549698] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... +[ 0.549721] hid: raw HID events driver (C) Jiri Kosina +[ 0.549753] usbcore: registered new interface driver usbhid +[ 0.549756] usbhid: USB HID core driver +[ 0.550307] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available +[ 0.550883] Key type dns_resolver registered +[ 0.567773] registered taskstats version 1 +[ 0.567905] Loading compiled-in X.509 certificates +[ 0.571933] Key type .fscrypt registered +[ 0.571937] Key type fscrypt-provisioning registered +[ 0.572913] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: +[ 0.572926] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] +[ 0.572942] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 +[ 0.572951] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 +[ 0.572964] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 +[ 0.572971] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 +[ 0.574795] brcm-pcie 1000120000.pcie: Forcing gen 2 +[ 0.575056] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00 +[ 0.575061] pci_bus 0000:00: root bus resource [bus 00-ff] +[ 0.575067] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) +[ 0.575072] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) +[ 0.575090] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400 +[ 0.575124] pci 0000:00:00.0: PME# supported from D0 D3hot +[ 0.576411] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring +[ 0.681342] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) +[ 0.681373] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000 +[ 0.681390] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff] +[ 0.681401] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff] +[ 0.681410] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff] +[ 0.681490] pci 0000:01:00.0: supports D1 +[ 0.681493] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold +[ 0.693351] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 +[ 0.693365] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff] +[ 0.693372] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff] +[ 0.693378] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff] +[ 0.693385] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff] +[ 0.693391] pci 0000:00:00.0: PCI bridge to [bus 01] +[ 0.693395] pci 0000:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] +[ 0.693402] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 +[ 0.693412] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 +[ 0.693534] pcieport 0000:00:00.0: enabling device (0000 -> 0002) +[ 0.693591] pcieport 0000:00:00.0: PME: Signaling with IRQ 37 +[ 0.693796] pcieport 0000:00:00.0: AER: enabled with IRQ 37 +[ 0.693935] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 +[ 0.693941] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 +[ 0.693953] rp1 0000:01:00.0: enabling device (0000 -> 0002) +[ 0.695263] rp1 0000:01:00.0: chip_id 0x20001927 +[ 0.701290] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 99 +[ 0.722120] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 105 (2c:cf:67:8a:43:1d) +[ 0.722822] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels +[ 0.723212] xhci-hcd xhci-hcd.0: xHCI Host Controller +[ 0.723221] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 +[ 0.723698] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 +[ 0.723716] xhci-hcd xhci-hcd.0: irq 130, io mem 0x1f00200000 +[ 0.723805] xhci-hcd xhci-hcd.0: xHCI Host Controller +[ 0.723810] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 +[ 0.723815] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed +[ 0.724299] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 +[ 0.724306] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.724310] usb usb1: Product: xHCI Host Controller +[ 0.724313] usb usb1: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.724317] usb usb1: SerialNumber: xhci-hcd.0 +[ 0.724566] hub 1-0:1.0: USB hub found +[ 0.724584] hub 1-0:1.0: 2 ports detected +[ 0.724842] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 +[ 0.724848] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.724851] usb usb2: Product: xHCI Host Controller +[ 0.724854] usb usb2: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.724857] usb usb2: SerialNumber: xhci-hcd.0 +[ 0.725060] hub 2-0:1.0: USB hub found +[ 0.725074] hub 2-0:1.0: 1 port detected +[ 0.725788] xhci-hcd xhci-hcd.1: xHCI Host Controller +[ 0.725797] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 +[ 0.726265] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 +[ 0.726287] xhci-hcd xhci-hcd.1: irq 135, io mem 0x1f00300000 +[ 0.726377] xhci-hcd xhci-hcd.1: xHCI Host Controller +[ 0.726381] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 +[ 0.726386] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed +[ 0.726456] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 +[ 0.726460] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.726464] usb usb3: Product: xHCI Host Controller +[ 0.726467] usb usb3: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.726470] usb usb3: SerialNumber: xhci-hcd.1 +[ 0.726702] hub 3-0:1.0: USB hub found +[ 0.726719] hub 3-0:1.0: 2 ports detected +[ 0.726971] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 +[ 0.726976] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +[ 0.726980] usb usb4: Product: xHCI Host Controller +[ 0.726982] usb usb4: Manufacturer: Linux 6.6.49-0-rpi xhci-hcd +[ 0.726985] usb usb4: SerialNumber: xhci-hcd.1 +[ 0.727181] hub 4-0:1.0: USB hub found +[ 0.727196] hub 4-0:1.0: 1 port detected +[ 0.728420] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.728859] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu +[ 0.728867] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu +[ 0.728874] platform 1000800000.codec: Adding to iommu group 0 +[ 0.728888] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu +[ 0.728894] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu +[ 0.728900] platform 1000880000.pisp_be: Adding to iommu group 0 +[ 0.728930] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu +[ 0.728933] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu +[ 0.728941] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success +[ 0.729566] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.730015] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success +[ 0.730652] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 +[ 0.731096] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success +[ 0.731819] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO +[ 0.731984] mmc0: CQHCI version 5.10 +[ 0.732623] mmc1: CQHCI version 5.10 +[ 0.733498] of_cfs_init +[ 0.733538] of_cfs_init: OK +[ 0.733668] clk: Disabling unused clocks +[ 0.768846] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit +[ 0.862449] mmc0: new ultra high speed SDR104 SDHC card at address 59b4 +[ 0.862763] mmcblk0: mmc0:59b4 LX32G 29.5 GiB +[ 0.864041] mmcblk0: p1 p2 +[ 0.864197] mmcblk0: mmc0:59b4 LX32G 29.5 GiB +[ 0.917870] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit +[ 0.919987] Freeing unused kernel memory: 3456K +[ 0.920068] Run /init as init process +[ 0.920070] with arguments: +[ 0.920072] /init +[ 0.920074] with environment: +[ 0.920075] HOME=/ +[ 0.920077] TERM=linux +[ 0.920079] modules=loop,squashfs,sd-mod,usb-storage +[ 0.936143] Alpine Init 3.10.1-r0 +[ 0.937235] Loading boot drivers... +[ 0.941861] squashfs: version 4.0 (2009/01/31) Phillip Lougher +[ 0.942425] Loading boot drivers: ok. +[ 0.944532] Mounting boot media... +[ 0.956247] mmc1: new ultra high speed DDR50 SDIO card at address 0001 +[ 0.982068] usb 3-1: new low-speed USB device number 2 using xhci-hcd +[ 1.172715] usb 3-1: New USB device found, idVendor=046d, idProduct=c313, bcdDevice= 1.01 +[ 1.172727] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 +[ 1.172732] usb 3-1: Product: USB Multimedia Keyboard +[ 1.172736] usb 3-1: Manufacturer: LITEON Technology +[ 1.254607] input: LITEON Technology USB Multimedia Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1:1.0/0003:046D:C313.0001/input/input0 +[ 1.313523] hid-generic 0003:046D:C313.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-xhci-hcd.1-1/input0 +[ 1.318492] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs +[ 1.319717] EXT4-fs (mmcblk0p2): mounted filesystem e279b314-51dd-4303-99f6-e6dd3d0fa0ee ro with ordered data mode. Quota mode: none. +[ 1.337475] input: LITEON Technology USB Multimedia Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1:1.1/0003:046D:C313.0002/input/input1 +[ 1.358348] Mounting boot media: ok. +[ 1.360513] Loading user settings from /media/mmcblk0p1/localhost.apkovl.tar.gz... +[ 1.375753] Loading user settings from /media/mmcblk0p1/localhost.apkovl.tar.gz: ok. +[ 1.401595] hid-generic 0003:046D:C313.0002: input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-xhci-hcd.1-1/input1 +[ 1.737937] Installing packages to root filesystem... +[ 6.940787] Installing packages to root filesystem: ok. +[ 7.737377] loop0: detected capacity change from 0 to 61016 +[ 7.739654] F2FS-fs (loop0): Magic Mismatch, valid(0xf2f52010) - read(0x8eeb746f) +[ 7.739663] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock +[ 7.739687] F2FS-fs (loop0): Magic Mismatch, valid(0xf2f52010) - read(0xfde4274) +[ 7.739691] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock +[ 8.718581] Bluetooth: Core ver 2.22 +[ 8.718623] NET: Registered PF_BLUETOOTH protocol family +[ 8.718626] Bluetooth: HCI device and connection manager initialized +[ 8.718635] Bluetooth: HCI socket layer initialized +[ 8.718639] Bluetooth: L2CAP socket layer initialized +[ 8.718646] Bluetooth: SCO socket layer initialized +[ 8.732107] Bluetooth: HCI UART driver ver 2.3 +[ 8.732116] Bluetooth: HCI UART protocol H4 registered +[ 8.732152] Bluetooth: HCI UART protocol Three-wire (H5) registered +[ 8.732242] Bluetooth: HCI UART protocol Broadcom registered +[ 8.732379] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator +[ 8.732444] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator +[ 8.980868] mc: Linux media interface: v0.10 +[ 9.013628] videodev: Linux video capture interface: v2.00 +[ 9.033787] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. +[ 9.034524] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu +[ 9.035825] rpivid 1000800000.codec: Device registered as /dev/video19 +[ 9.045506] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 +[ 9.045696] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 +[ 9.045854] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 +[ 9.050284] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 +[ 9.050362] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 +[ 9.051125] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 +[ 9.051191] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 +[ 9.054018] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 +[ 9.054172] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 +[ 9.057367] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 +[ 9.078855] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu +[ 9.082071] pispbe 1000880000.pisp_be: Runtime PM usage count underflow! +[ 9.093746] input: pwr_button as /devices/platform/pwr_button/input/input2 +[ 9.097224] Bluetooth: hci0: BCM: chip id 107 +[ 9.097910] Bluetooth: hci0: BCM: features 0x2f +[ 9.099046] Bluetooth: hci0: BCM4345C0 +[ 9.099053] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 +[ 9.130865] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch +[ 9.225813] cfg80211: Loading compiled-in X.509 certificates for regulatory database +[ 9.257089] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' +[ 9.257666] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' +[ 9.258175] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' +[ 9.258626] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' +[ 9.333794] brcmfmac: F1 signature read @0x18000000=0x15264345 +[ 9.335762] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 +[ 9.335949] usbcore: registered new interface driver brcmfmac +[ 9.575071] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) +[ 9.575345] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2 +[ 9.878005] Bluetooth: hci0: BCM: features 0x2f +[ 9.879391] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190 +[ 9.879395] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382 +[ 9.879738] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac) +[ 9.914421] NET: Registered PF_PACKET protocol family +[ 9.981472] NET: Registered PF_INET6 protocol family +[ 9.982025] Segment Routing with IPv6 +[ 9.982037] In-situ OAM (IOAM) with IPv6 +[ 10.118507] EXT4-fs (mmcblk0p2): re-mounted e279b314-51dd-4303-99f6-e6dd3d0fa0ee r/w. Quota mode: none. diff --git a/go-gin/go.mod b/go-gin/go.mod index 21f9e343..47abe7b1 100644 --- a/go-gin/go.mod +++ b/go-gin/go.mod @@ -5,7 +5,7 @@ go 1.23.1 require ( github.com/gin-gonic/gin v1.9.1 gorm.io/driver/postgres v1.5.9 - gorm.io/gorm v1.25.10 + gorm.io/gorm v1.25.12 ) require ( diff --git a/go-gin/go.sum b/go-gin/go.sum index 684d93ba..c74c6f74 100644 --- a/go-gin/go.sum +++ b/go-gin/go.sum @@ -122,7 +122,7 @@ gopkg.in/yaml.v3 v3.0.1 h1:fxVm/GzAzEWqLHuvctI91KS9hhNmmWOoWu0XTYJS7CA= gopkg.in/yaml.v3 v3.0.1/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM= gorm.io/driver/postgres v1.5.9 h1:DkegyItji119OlcaLjqN11kHoUgZ/j13E0jkJZgD6A8= gorm.io/driver/postgres v1.5.9/go.mod h1:DX3GReXH+3FPWGrrgffdvCk3DQ1dwDPdmbenSkweRGI= -gorm.io/gorm v1.25.10 h1:dQpO+33KalOA+aFYGlK+EfxcI5MbO7EP2yYygwh9h+s= -gorm.io/gorm v1.25.10/go.mod h1:hbnx/Oo0ChWMn1BIhpy1oYozzpM15i4YPuHDmfYtwg8= +gorm.io/gorm v1.25.12 h1:I0u8i2hWQItBq1WfE0o2+WuL9+8L21K9e2HHSTE/0f8= +gorm.io/gorm v1.25.12/go.mod h1:xh7N7RHfYlNc5EmcI/El95gXusucDrQnHXe0+CgWcLQ= nullprogram.com/x/optparse v1.0.0/go.mod h1:KdyPE+Igbe0jQUrVfMqDMeJQIJZEuyV7pjYmp6pbG50= rsc.io/pdf v0.1.1/go.mod h1:n8OzWcQ6Sp37PL01nO98y4iUCRdTGarVfzxY20ICaU4=