Permalink
Fetching contributors…
Cannot retrieve contributors at this time
605 lines (560 sloc) 19.3 KB
optiboot_atmega8.elf: file format elf32-avr
Sections:
Idx Name Size VMA LMA File off Algn
0 .text 000001e0 00001e00 00001e00 00000054 2**1
CONTENTS, ALLOC, LOAD, READONLY, CODE
1 .version 00000002 00001ffe 00001ffe 00000234 2**0
CONTENTS, READONLY
2 .debug_aranges 00000028 00000000 00000000 00000236 2**0
CONTENTS, READONLY, DEBUGGING
3 .debug_pubnames 0000005f 00000000 00000000 0000025e 2**0
CONTENTS, READONLY, DEBUGGING
4 .debug_info 000002a6 00000000 00000000 000002bd 2**0
CONTENTS, READONLY, DEBUGGING
5 .debug_abbrev 00000169 00000000 00000000 00000563 2**0
CONTENTS, READONLY, DEBUGGING
6 .debug_line 00000498 00000000 00000000 000006cc 2**0
CONTENTS, READONLY, DEBUGGING
7 .debug_frame 00000080 00000000 00000000 00000b64 2**2
CONTENTS, READONLY, DEBUGGING
8 .debug_str 0000014f 00000000 00000000 00000be4 2**0
CONTENTS, READONLY, DEBUGGING
9 .debug_loc 000002ba 00000000 00000000 00000d33 2**0
CONTENTS, READONLY, DEBUGGING
10 .debug_ranges 00000078 00000000 00000000 00000fed 2**0
CONTENTS, READONLY, DEBUGGING
Disassembly of section .text:
00001e00 <main>:
#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4))
#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6))
#endif
/* main program starts here */
int main(void) {
1e00: 11 24 eor r1, r1
//
// If not, uncomment the following instructions:
// cli();
asm volatile ("clr __zero_reg__");
#ifdef __AVR_ATmega8__
SP=RAMEND; // This is done by hardware reset
1e02: 8f e5 ldi r24, 0x5F ; 95
1e04: 94 e0 ldi r25, 0x04 ; 4
1e06: 9e bf out 0x3e, r25 ; 62
1e08: 8d bf out 0x3d, r24 ; 61
#endif
// Adaboot no-wait mod
ch = MCUSR;
1e0a: 84 b7 in r24, 0x34 ; 52
MCUSR = 0;
1e0c: 14 be out 0x34, r1 ; 52
if (!(ch & _BV(EXTRF))) appStart();
1e0e: 81 ff sbrs r24, 1
1e10: e2 d0 rcall .+452 ; 0x1fd6 <appStart>
#if LED_START_FLASHES > 0
// Set up Timer 1 for timeout counter
TCCR1B = _BV(CS12) | _BV(CS10); // div 1024
1e12: 85 e0 ldi r24, 0x05 ; 5
1e14: 8e bd out 0x2e, r24 ; 46
#endif
#ifndef SOFT_UART
#ifdef __AVR_ATmega8__
UCSRA = _BV(U2X); //Double speed mode USART
1e16: 82 e0 ldi r24, 0x02 ; 2
1e18: 8b b9 out 0x0b, r24 ; 11
UCSRB = _BV(RXEN) | _BV(TXEN); // enable Rx & Tx
1e1a: 88 e1 ldi r24, 0x18 ; 24
1e1c: 8a b9 out 0x0a, r24 ; 10
UCSRC = _BV(URSEL) | _BV(UCSZ1) | _BV(UCSZ0); // config USART; 8N1
1e1e: 86 e8 ldi r24, 0x86 ; 134
1e20: 80 bd out 0x20, r24 ; 32
UBRRL = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 );
1e22: 80 e1 ldi r24, 0x10 ; 16
1e24: 89 b9 out 0x09, r24 ; 9
UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 );
#endif
#endif
// Set up watchdog to trigger after 500ms
watchdogConfig(WATCHDOG_1S);
1e26: 8e e0 ldi r24, 0x0E ; 14
1e28: c2 d0 rcall .+388 ; 0x1fae <watchdogConfig>
/* Set LED pin as output */
LED_DDR |= _BV(LED);
1e2a: bd 9a sbi 0x17, 5 ; 23
1e2c: 96 e0 ldi r25, 0x06 ; 6
}
#if LED_START_FLASHES > 0
void flash_led(uint8_t count) {
do {
TCNT1 = -(F_CPU/(1024*16));
1e2e: 20 e3 ldi r18, 0x30 ; 48
1e30: 3c ef ldi r19, 0xFC ; 252
TIFR1 = _BV(TOV1);
1e32: 54 e0 ldi r21, 0x04 ; 4
while(!(TIFR1 & _BV(TOV1)));
#ifdef __AVR_ATmega8__
LED_PORT ^= _BV(LED);
1e34: 40 e2 ldi r20, 0x20 ; 32
}
#if LED_START_FLASHES > 0
void flash_led(uint8_t count) {
do {
TCNT1 = -(F_CPU/(1024*16));
1e36: 3d bd out 0x2d, r19 ; 45
1e38: 2c bd out 0x2c, r18 ; 44
TIFR1 = _BV(TOV1);
1e3a: 58 bf out 0x38, r21 ; 56
while(!(TIFR1 & _BV(TOV1)));
1e3c: 08 b6 in r0, 0x38 ; 56
1e3e: 02 fe sbrs r0, 2
1e40: fd cf rjmp .-6 ; 0x1e3c <main+0x3c>
#ifdef __AVR_ATmega8__
LED_PORT ^= _BV(LED);
1e42: 88 b3 in r24, 0x18 ; 24
1e44: 84 27 eor r24, r20
1e46: 88 bb out 0x18, r24 ; 24
}
#endif
// Watchdog functions. These are only safe with interrupts turned off.
void watchdogReset() {
__asm__ __volatile__ (
1e48: a8 95 wdr
LED_PORT ^= _BV(LED);
#else
LED_PIN |= _BV(LED);
#endif
watchdogReset();
} while (--count);
1e4a: 91 50 subi r25, 0x01 ; 1
1e4c: a1 f7 brne .-24 ; 0x1e36 <main+0x36>
1e4e: cc 24 eor r12, r12
1e50: dd 24 eor r13, r13
ch = SPM_PAGESIZE / 2;
do {
uint16_t a;
a = *bufPtr++;
a |= (*bufPtr++) << 8;
__boot_page_fill_short((uint16_t)(void*)addrPtr,a);
1e52: 88 24 eor r8, r8
1e54: 83 94 inc r8
addrPtr += 2;
} while (--ch);
// Write from programming buffer
__boot_page_write_short((uint16_t)(void*)address);
1e56: b5 e0 ldi r27, 0x05 ; 5
1e58: ab 2e mov r10, r27
boot_spm_busy_wait();
#if defined(RWWSRE)
// Reenable read access to flash
boot_rww_enable();
1e5a: a1 e1 ldi r26, 0x11 ; 17
1e5c: 9a 2e mov r9, r26
do *bufPtr++ = getch();
while (--length);
// If we are in NRWW section, page erase has to be delayed until now.
// Todo: Take RAMPZ into account
if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address);
1e5e: f3 e0 ldi r31, 0x03 ; 3
1e60: bf 2e mov r11, r31
#endif
/* Forever loop */
for (;;) {
/* get character from UART */
ch = getch();
1e62: 9e d0 rcall .+316 ; 0x1fa0 <getch>
if(ch == STK_GET_PARAMETER) {
1e64: 81 34 cpi r24, 0x41 ; 65
1e66: 61 f4 brne .+24 ; 0x1e80 <main+0x80>
unsigned char which = getch();
1e68: 9b d0 rcall .+310 ; 0x1fa0 <getch>
1e6a: 08 2f mov r16, r24
verifySpace();
1e6c: a4 d0 rcall .+328 ; 0x1fb6 <verifySpace>
if (which == 0x82) {
1e6e: 02 38 cpi r16, 0x82 ; 130
1e70: 11 f0 breq .+4 ; 0x1e76 <main+0x76>
/*
* Send optiboot version as "minor SW version"
*/
putch(OPTIBOOT_MINVER);
} else if (which == 0x81) {
1e72: 01 38 cpi r16, 0x81 ; 129
1e74: 11 f4 brne .+4 ; 0x1e7a <main+0x7a>
putch(OPTIBOOT_MAJVER);
1e76: 84 e0 ldi r24, 0x04 ; 4
1e78: 01 c0 rjmp .+2 ; 0x1e7c <main+0x7c>
} else {
/*
* GET PARAMETER returns a generic 0x03 reply for
* other parameters - enough to keep Avrdude happy
*/
putch(0x03);
1e7a: 83 e0 ldi r24, 0x03 ; 3
1e7c: 8d d0 rcall .+282 ; 0x1f98 <putch>
1e7e: 89 c0 rjmp .+274 ; 0x1f92 <main+0x192>
}
}
else if(ch == STK_SET_DEVICE) {
1e80: 82 34 cpi r24, 0x42 ; 66
1e82: 11 f4 brne .+4 ; 0x1e88 <main+0x88>
// SET DEVICE is ignored
getNch(20);
1e84: 84 e1 ldi r24, 0x14 ; 20
1e86: 03 c0 rjmp .+6 ; 0x1e8e <main+0x8e>
}
else if(ch == STK_SET_DEVICE_EXT) {
1e88: 85 34 cpi r24, 0x45 ; 69
1e8a: 19 f4 brne .+6 ; 0x1e92 <main+0x92>
// SET DEVICE EXT is ignored
getNch(5);
1e8c: 85 e0 ldi r24, 0x05 ; 5
1e8e: 9b d0 rcall .+310 ; 0x1fc6 <getNch>
1e90: 80 c0 rjmp .+256 ; 0x1f92 <main+0x192>
}
else if(ch == STK_LOAD_ADDRESS) {
1e92: 85 35 cpi r24, 0x55 ; 85
1e94: 79 f4 brne .+30 ; 0x1eb4 <main+0xb4>
// LOAD ADDRESS
uint16_t newAddress;
newAddress = getch();
1e96: 84 d0 rcall .+264 ; 0x1fa0 <getch>
newAddress = (newAddress & 0xff) | (getch() << 8);
1e98: e8 2e mov r14, r24
1e9a: ff 24 eor r15, r15
1e9c: 81 d0 rcall .+258 ; 0x1fa0 <getch>
1e9e: 08 2f mov r16, r24
1ea0: 10 e0 ldi r17, 0x00 ; 0
1ea2: 10 2f mov r17, r16
1ea4: 00 27 eor r16, r16
1ea6: 0e 29 or r16, r14
1ea8: 1f 29 or r17, r15
#ifdef RAMPZ
// Transfer top bit to RAMPZ
RAMPZ = (newAddress & 0x8000) ? 1 : 0;
#endif
newAddress += newAddress; // Convert from word address to byte address
1eaa: 00 0f add r16, r16
1eac: 11 1f adc r17, r17
address = newAddress;
verifySpace();
1eae: 83 d0 rcall .+262 ; 0x1fb6 <verifySpace>
1eb0: 68 01 movw r12, r16
1eb2: 6f c0 rjmp .+222 ; 0x1f92 <main+0x192>
}
else if(ch == STK_UNIVERSAL) {
1eb4: 86 35 cpi r24, 0x56 ; 86
1eb6: 21 f4 brne .+8 ; 0x1ec0 <main+0xc0>
// UNIVERSAL command is ignored
getNch(4);
1eb8: 84 e0 ldi r24, 0x04 ; 4
1eba: 85 d0 rcall .+266 ; 0x1fc6 <getNch>
putch(0x00);
1ebc: 80 e0 ldi r24, 0x00 ; 0
1ebe: de cf rjmp .-68 ; 0x1e7c <main+0x7c>
}
/* Write memory, length is big endian and is in bytes */
else if(ch == STK_PROG_PAGE) {
1ec0: 84 36 cpi r24, 0x64 ; 100
1ec2: 09 f0 breq .+2 ; 0x1ec6 <main+0xc6>
1ec4: 40 c0 rjmp .+128 ; 0x1f46 <main+0x146>
// PROGRAM PAGE - we support flash programming only, not EEPROM
uint8_t *bufPtr;
uint16_t addrPtr;
getch(); /* getlen() */
1ec6: 6c d0 rcall .+216 ; 0x1fa0 <getch>
length = getch();
1ec8: 6b d0 rcall .+214 ; 0x1fa0 <getch>
1eca: 08 2f mov r16, r24
getch();
1ecc: 69 d0 rcall .+210 ; 0x1fa0 <getch>
// If we are in RWW section, immediately start page erase
if (address < NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address);
1ece: 80 e0 ldi r24, 0x00 ; 0
1ed0: c8 16 cp r12, r24
1ed2: 88 e1 ldi r24, 0x18 ; 24
1ed4: d8 06 cpc r13, r24
1ed6: 18 f4 brcc .+6 ; 0x1ede <main+0xde>
1ed8: f6 01 movw r30, r12
1eda: b7 be out 0x37, r11 ; 55
1edc: e8 95 spm
1ede: c0 e0 ldi r28, 0x00 ; 0
1ee0: d1 e0 ldi r29, 0x01 ; 1
// While that is going on, read in page contents
bufPtr = buff;
do *bufPtr++ = getch();
1ee2: 5e d0 rcall .+188 ; 0x1fa0 <getch>
1ee4: 89 93 st Y+, r24
while (--length);
1ee6: 0c 17 cp r16, r28
1ee8: e1 f7 brne .-8 ; 0x1ee2 <main+0xe2>
// If we are in NRWW section, page erase has to be delayed until now.
// Todo: Take RAMPZ into account
if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address);
1eea: f0 e0 ldi r31, 0x00 ; 0
1eec: cf 16 cp r12, r31
1eee: f8 e1 ldi r31, 0x18 ; 24
1ef0: df 06 cpc r13, r31
1ef2: 18 f0 brcs .+6 ; 0x1efa <main+0xfa>
1ef4: f6 01 movw r30, r12
1ef6: b7 be out 0x37, r11 ; 55
1ef8: e8 95 spm
// Read command terminator, start reply
verifySpace();
1efa: 5d d0 rcall .+186 ; 0x1fb6 <verifySpace>
// If only a partial page is to be programmed, the erase might not be complete.
// So check that here
boot_spm_busy_wait();
1efc: 07 b6 in r0, 0x37 ; 55
1efe: 00 fc sbrc r0, 0
1f00: fd cf rjmp .-6 ; 0x1efc <main+0xfc>
1f02: a6 01 movw r20, r12
1f04: a0 e0 ldi r26, 0x00 ; 0
1f06: b1 e0 ldi r27, 0x01 ; 1
bufPtr = buff;
addrPtr = (uint16_t)(void*)address;
ch = SPM_PAGESIZE / 2;
do {
uint16_t a;
a = *bufPtr++;
1f08: 2c 91 ld r18, X
1f0a: 30 e0 ldi r19, 0x00 ; 0
a |= (*bufPtr++) << 8;
1f0c: 11 96 adiw r26, 0x01 ; 1
1f0e: 8c 91 ld r24, X
1f10: 11 97 sbiw r26, 0x01 ; 1
1f12: 90 e0 ldi r25, 0x00 ; 0
1f14: 98 2f mov r25, r24
1f16: 88 27 eor r24, r24
1f18: 82 2b or r24, r18
1f1a: 93 2b or r25, r19
#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4))
#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6))
#endif
/* main program starts here */
int main(void) {
1f1c: 12 96 adiw r26, 0x02 ; 2
ch = SPM_PAGESIZE / 2;
do {
uint16_t a;
a = *bufPtr++;
a |= (*bufPtr++) << 8;
__boot_page_fill_short((uint16_t)(void*)addrPtr,a);
1f1e: fa 01 movw r30, r20
1f20: 0c 01 movw r0, r24
1f22: 87 be out 0x37, r8 ; 55
1f24: e8 95 spm
1f26: 11 24 eor r1, r1
addrPtr += 2;
1f28: 4e 5f subi r20, 0xFE ; 254
1f2a: 5f 4f sbci r21, 0xFF ; 255
} while (--ch);
1f2c: f1 e0 ldi r31, 0x01 ; 1
1f2e: a0 34 cpi r26, 0x40 ; 64
1f30: bf 07 cpc r27, r31
1f32: 51 f7 brne .-44 ; 0x1f08 <main+0x108>
// Write from programming buffer
__boot_page_write_short((uint16_t)(void*)address);
1f34: f6 01 movw r30, r12
1f36: a7 be out 0x37, r10 ; 55
1f38: e8 95 spm
boot_spm_busy_wait();
1f3a: 07 b6 in r0, 0x37 ; 55
1f3c: 00 fc sbrc r0, 0
1f3e: fd cf rjmp .-6 ; 0x1f3a <main+0x13a>
#if defined(RWWSRE)
// Reenable read access to flash
boot_rww_enable();
1f40: 97 be out 0x37, r9 ; 55
1f42: e8 95 spm
1f44: 26 c0 rjmp .+76 ; 0x1f92 <main+0x192>
#endif
}
/* Read memory block mode, length is big endian. */
else if(ch == STK_READ_PAGE) {
1f46: 84 37 cpi r24, 0x74 ; 116
1f48: b1 f4 brne .+44 ; 0x1f76 <main+0x176>
// READ PAGE - we only read flash
getch(); /* getlen() */
1f4a: 2a d0 rcall .+84 ; 0x1fa0 <getch>
length = getch();
1f4c: 29 d0 rcall .+82 ; 0x1fa0 <getch>
1f4e: f8 2e mov r15, r24
getch();
1f50: 27 d0 rcall .+78 ; 0x1fa0 <getch>
verifySpace();
1f52: 31 d0 rcall .+98 ; 0x1fb6 <verifySpace>
1f54: f6 01 movw r30, r12
1f56: ef 2c mov r14, r15
putch(result);
address++;
}
while (--length);
#else
do putch(pgm_read_byte_near(address++));
1f58: 8f 01 movw r16, r30
1f5a: 0f 5f subi r16, 0xFF ; 255
1f5c: 1f 4f sbci r17, 0xFF ; 255
1f5e: 84 91 lpm r24, Z+
1f60: 1b d0 rcall .+54 ; 0x1f98 <putch>
while (--length);
1f62: ea 94 dec r14
1f64: f8 01 movw r30, r16
1f66: c1 f7 brne .-16 ; 0x1f58 <main+0x158>
#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4))
#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6))
#endif
/* main program starts here */
int main(void) {
1f68: 08 94 sec
1f6a: c1 1c adc r12, r1
1f6c: d1 1c adc r13, r1
1f6e: fa 94 dec r15
1f70: cf 0c add r12, r15
1f72: d1 1c adc r13, r1
1f74: 0e c0 rjmp .+28 ; 0x1f92 <main+0x192>
#endif
#endif
}
/* Get device signature bytes */
else if(ch == STK_READ_SIGN) {
1f76: 85 37 cpi r24, 0x75 ; 117
1f78: 39 f4 brne .+14 ; 0x1f88 <main+0x188>
// READ SIGN - return what Avrdude wants to hear
verifySpace();
1f7a: 1d d0 rcall .+58 ; 0x1fb6 <verifySpace>
putch(SIGNATURE_0);
1f7c: 8e e1 ldi r24, 0x1E ; 30
1f7e: 0c d0 rcall .+24 ; 0x1f98 <putch>
putch(SIGNATURE_1);
1f80: 83 e9 ldi r24, 0x93 ; 147
1f82: 0a d0 rcall .+20 ; 0x1f98 <putch>
putch(SIGNATURE_2);
1f84: 87 e0 ldi r24, 0x07 ; 7
1f86: 7a cf rjmp .-268 ; 0x1e7c <main+0x7c>
}
else if (ch == 'Q') {
1f88: 81 35 cpi r24, 0x51 ; 81
1f8a: 11 f4 brne .+4 ; 0x1f90 <main+0x190>
// Adaboot no-wait mod
watchdogConfig(WATCHDOG_16MS);
1f8c: 88 e0 ldi r24, 0x08 ; 8
1f8e: 0f d0 rcall .+30 ; 0x1fae <watchdogConfig>
verifySpace();
}
else {
// This covers the response to commands like STK_ENTER_PROGMODE
verifySpace();
1f90: 12 d0 rcall .+36 ; 0x1fb6 <verifySpace>
}
putch(STK_OK);
1f92: 80 e1 ldi r24, 0x10 ; 16
1f94: 01 d0 rcall .+2 ; 0x1f98 <putch>
1f96: 65 cf rjmp .-310 ; 0x1e62 <main+0x62>
00001f98 <putch>:
}
}
void putch(char ch) {
#ifndef SOFT_UART
while (!(UCSR0A & _BV(UDRE0)));
1f98: 5d 9b sbis 0x0b, 5 ; 11
1f9a: fe cf rjmp .-4 ; 0x1f98 <putch>
UDR0 = ch;
1f9c: 8c b9 out 0x0c, r24 ; 12
[uartBit] "I" (UART_TX_BIT)
:
"r25"
);
#endif
}
1f9e: 08 95 ret
00001fa0 <getch>:
[uartBit] "I" (UART_RX_BIT)
:
"r25"
);
#else
while(!(UCSR0A & _BV(RXC0)))
1fa0: 5f 9b sbis 0x0b, 7 ; 11
1fa2: fe cf rjmp .-4 ; 0x1fa0 <getch>
;
if (!(UCSR0A & _BV(FE0))) {
1fa4: 5c 99 sbic 0x0b, 4 ; 11
1fa6: 01 c0 rjmp .+2 ; 0x1faa <getch+0xa>
}
#endif
// Watchdog functions. These are only safe with interrupts turned off.
void watchdogReset() {
__asm__ __volatile__ (
1fa8: a8 95 wdr
* don't care that an invalid char is returned...)
*/
watchdogReset();
}
ch = UDR0;
1faa: 8c b1 in r24, 0x0c ; 12
LED_PIN |= _BV(LED);
#endif
#endif
return ch;
}
1fac: 08 95 ret
00001fae <watchdogConfig>:
"wdr\n"
);
}
void watchdogConfig(uint8_t x) {
WDTCSR = _BV(WDCE) | _BV(WDE);
1fae: 98 e1 ldi r25, 0x18 ; 24
1fb0: 91 bd out 0x21, r25 ; 33
WDTCSR = x;
1fb2: 81 bd out 0x21, r24 ; 33
}
1fb4: 08 95 ret
00001fb6 <verifySpace>:
do getch(); while (--count);
verifySpace();
}
void verifySpace() {
if (getch() != CRC_EOP) {
1fb6: f4 df rcall .-24 ; 0x1fa0 <getch>
1fb8: 80 32 cpi r24, 0x20 ; 32
1fba: 19 f0 breq .+6 ; 0x1fc2 <verifySpace+0xc>
watchdogConfig(WATCHDOG_16MS); // shorten WD timeout
1fbc: 88 e0 ldi r24, 0x08 ; 8
1fbe: f7 df rcall .-18 ; 0x1fae <watchdogConfig>
1fc0: ff cf rjmp .-2 ; 0x1fc0 <verifySpace+0xa>
while (1) // and busy-loop so that WD causes
; // a reset and app start.
}
putch(STK_INSYNC);
1fc2: 84 e1 ldi r24, 0x14 ; 20
}
1fc4: e9 cf rjmp .-46 ; 0x1f98 <putch>
00001fc6 <getNch>:
::[count] "M" (UART_B_VALUE)
);
}
#endif
void getNch(uint8_t count) {
1fc6: 1f 93 push r17
1fc8: 18 2f mov r17, r24
do getch(); while (--count);
1fca: ea df rcall .-44 ; 0x1fa0 <getch>
1fcc: 11 50 subi r17, 0x01 ; 1
1fce: e9 f7 brne .-6 ; 0x1fca <getNch+0x4>
verifySpace();
1fd0: f2 df rcall .-28 ; 0x1fb6 <verifySpace>
}
1fd2: 1f 91 pop r17
1fd4: 08 95 ret
00001fd6 <appStart>:
WDTCSR = _BV(WDCE) | _BV(WDE);
WDTCSR = x;
}
void appStart() {
watchdogConfig(WATCHDOG_OFF);
1fd6: 80 e0 ldi r24, 0x00 ; 0
1fd8: ea df rcall .-44 ; 0x1fae <watchdogConfig>
__asm__ __volatile__ (
1fda: ee 27 eor r30, r30
1fdc: ff 27 eor r31, r31
1fde: 09 94 ijmp