Skip to content
Ethernet Shield for Arduino
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
Hardware
Software
README.md

README.md

W5200 Ethernet Shield

W5200 Ethernet Shield is compatible with Official Arduino Ethernet Shield and support fast SPI and 8 sockets.

W5200 Ethernet Shield

Hardware

These are PCB files for the W5200 Ethernet Shield for Arduino. The files were created in the free & low cost EagleCad software available from CadSoft.

Software

You need to change the existing W5100 files to W5200 library files.

  1. Install W5200 library Overwrite w5100.cpp, w5100.h to the "/libraries/Ethernet/utility" folder in your Arduino IDE.

  2. Using the W5200 library and evaluate existing Ethernet example. In the Arduino IDE, go to Files->Examples->Ethernet and open any example, compile and upload the file to Arduino board.

  3. Note: libraries/Ethernet/Ethernet.h needs the following at line 10 instead of #define MAX_SOCK_NUM 4, since it doesn't #include "w5100.h" anymore:

#ifdef W5200

#define MAX_SOCK_NUM 8

#else

#define MAX_SOCK_NUM 4

#endif

Revision History

Initial Release : 10 June 2013

You can’t perform that action at this time.