Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
18 lines (10 sloc) 915 Bytes

Radio module identification

  • Make sure that you are using the same radio modules on both server and client sides:

    • If the radio module on the gateway router supports the 2.4 GHz frequency band, the client side must have an mbed 6LoWPAN shield that uses a 2.4 GHz radio module (such as Atmel AT86RF233).

    • If the radio module on the gateway router supports the sub-GHz frequency band, the client side must have an mbed 6LoWPAN shield that uses a sub-GHz radio module (such as Atmel AT86RF212B).

  • An easy way to identify which frequency band your setup uses is to check the Antenna size on the radio module:

    • The sub-GHz band antenna is larger than the 2.4 GHz antenna.

    • For the client side (mbed 6LoWPAN shield connected to an FRDM-K64F board), see the image below:

    • For the gateway router, see the image below:

You can’t perform that action at this time.