Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md: (24 commits)
  md: clean up do_md_stop
  md: fix another deadlock with removing sysfs attributes.
  md: move revalidate_disk() back outside open_mutex
  md/raid10: fix deadlock with unaligned read during resync
  md/bitmap:  separate out loading a bitmap from initialising the structures.
  md/bitmap: prepare for storing write-intent-bitmap via dm-dirty-log.
  md/bitmap: optimise scanning of empty bitmaps.
  md/bitmap: clean up plugging calls.
  md/bitmap: reduce dependence on sysfs.
  md/bitmap: white space clean up and similar.
  md/raid5: export raid5 unplugging interface.
  md/plug: optionally use plugger to unplug an array during resync/recovery.
  md/raid5: add simple plugging infrastructure.
  md/raid5: export is_congested test
  raid5: Don't set read-ahead when there is no queue
  md: add support for raising dm events.
  md: export various start/stop interfaces
  md: split out md_rdev_init
  md: be more careful setting MD_CHANGE_CLEAN
  md/raid5: ensure we create a unique name for kmem_cache when mddev has no gendisk
  ...

crypto/async_tx/Kconfig

@@ -22,6 +22,20 @@ config ASYNC_RAID6_RECOV
 	tristate
 	select ASYNC_CORE
 	select ASYNC_PQ
+	select ASYNC_XOR
+
+config ASYNC_RAID6_TEST
+	tristate "Self test for hardware accelerated raid6 recovery"
+	depends on ASYNC_RAID6_RECOV
+	select ASYNC_MEMCPY
+	---help---
+	  This is a one-shot self test that permutes through the
+	  recovery of all the possible two disk failure scenarios for a
+	  N-disk array.  Recovery is performed with the asynchronous
+	  raid6 recovery routines, and will optionally use an offload
+	  engine if one is available.
+
+	  If unsure, say N.
 
 config ASYNC_TX_DISABLE_PQ_VAL_DMA
 	bool

drivers/md/Kconfig

@@ -121,7 +121,7 @@ config MD_RAID10
 config MD_RAID456
 	tristate "RAID-4/RAID-5/RAID-6 mode"
 	depends on BLK_DEV_MD
-	select MD_RAID6_PQ
+	select RAID6_PQ
 	select ASYNC_MEMCPY
 	select ASYNC_XOR
 	select ASYNC_PQ
@@ -165,22 +165,6 @@ config MULTICORE_RAID456
 
 	  If unsure, say N.
 
-config MD_RAID6_PQ
-	tristate
-
-config ASYNC_RAID6_TEST
-	tristate "Self test for hardware accelerated raid6 recovery"
-	depends on MD_RAID6_PQ
-	select ASYNC_RAID6_RECOV
-	---help---
-	  This is a one-shot self test that permutes through the
-	  recovery of all the possible two disk failure scenarios for a
-	  N-disk array.  Recovery is performed with the asynchronous
-	  raid6 recovery routines, and will optionally use an offload
-	  engine if one is available.
-
-	  If unsure, say N.
-
 config MD_MULTIPATH
 	tristate "Multipath I/O support"
 	depends on BLK_DEV_MD

drivers/md/Makefile

@@ -12,13 +12,6 @@ dm-log-userspace-y \
 		+= dm-log-userspace-base.o dm-log-userspace-transfer.o
 md-mod-y	+= md.o bitmap.o
 raid456-y	+= raid5.o
-raid6_pq-y	+= raid6algos.o raid6recov.o raid6tables.o \
-		   raid6int1.o raid6int2.o raid6int4.o \
-		   raid6int8.o raid6int16.o raid6int32.o \
-		   raid6altivec1.o raid6altivec2.o raid6altivec4.o \
-		   raid6altivec8.o \
-		   raid6mmx.o raid6sse1.o raid6sse2.o
-hostprogs-y	+= mktables
 
 # Note: link order is important.  All raid personalities
 # and must come before md.o, as they each initialise 
@@ -29,7 +22,6 @@ obj-$(CONFIG_MD_LINEAR)		+= linear.o
 obj-$(CONFIG_MD_RAID0)		+= raid0.o
 obj-$(CONFIG_MD_RAID1)		+= raid1.o
 obj-$(CONFIG_MD_RAID10)		+= raid10.o
-obj-$(CONFIG_MD_RAID6_PQ)	+= raid6_pq.o
 obj-$(CONFIG_MD_RAID456)	+= raid456.o
 obj-$(CONFIG_MD_MULTIPATH)	+= multipath.o
 obj-$(CONFIG_MD_FAULTY)		+= faulty.o
@@ -45,75 +37,6 @@ obj-$(CONFIG_DM_MIRROR)		+= dm-mirror.o dm-log.o dm-region-hash.o
 obj-$(CONFIG_DM_LOG_USERSPACE)	+= dm-log-userspace.o
 obj-$(CONFIG_DM_ZERO)		+= dm-zero.o
 
-quiet_cmd_unroll = UNROLL  $@
-      cmd_unroll = $(AWK) -f$(srctree)/$(src)/unroll.awk -vN=$(UNROLL) \
-                   < $< > $@ || ( rm -f $@ && exit 1 )
-
-ifeq ($(CONFIG_ALTIVEC),y)
-altivec_flags := -maltivec -mabi=altivec
-endif
-
 ifeq ($(CONFIG_DM_UEVENT),y)
 dm-mod-objs			+= dm-uevent.o
 endif
-
-targets += raid6int1.c
-$(obj)/raid6int1.c:   UNROLL := 1
-$(obj)/raid6int1.c:   $(src)/raid6int.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-targets += raid6int2.c
-$(obj)/raid6int2.c:   UNROLL := 2
-$(obj)/raid6int2.c:   $(src)/raid6int.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-targets += raid6int4.c
-$(obj)/raid6int4.c:   UNROLL := 4
-$(obj)/raid6int4.c:   $(src)/raid6int.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-targets += raid6int8.c
-$(obj)/raid6int8.c:   UNROLL := 8
-$(obj)/raid6int8.c:   $(src)/raid6int.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-targets += raid6int16.c
-$(obj)/raid6int16.c:  UNROLL := 16
-$(obj)/raid6int16.c:  $(src)/raid6int.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-targets += raid6int32.c
-$(obj)/raid6int32.c:  UNROLL := 32
-$(obj)/raid6int32.c:  $(src)/raid6int.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-CFLAGS_raid6altivec1.o += $(altivec_flags)
-targets += raid6altivec1.c
-$(obj)/raid6altivec1.c:   UNROLL := 1
-$(obj)/raid6altivec1.c:   $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-CFLAGS_raid6altivec2.o += $(altivec_flags)
-targets += raid6altivec2.c
-$(obj)/raid6altivec2.c:   UNROLL := 2
-$(obj)/raid6altivec2.c:   $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-CFLAGS_raid6altivec4.o += $(altivec_flags)
-targets += raid6altivec4.c
-$(obj)/raid6altivec4.c:   UNROLL := 4
-$(obj)/raid6altivec4.c:   $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-CFLAGS_raid6altivec8.o += $(altivec_flags)
-targets += raid6altivec8.c
-$(obj)/raid6altivec8.c:   UNROLL := 8
-$(obj)/raid6altivec8.c:   $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-quiet_cmd_mktable = TABLE   $@
-      cmd_mktable = $(obj)/mktables > $@ || ( rm -f $@ && exit 1 )
-
-targets += raid6tables.c
-$(obj)/raid6tables.c: $(obj)/mktables FORCE
-	$(call if_changed,mktable)