Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
tag: v2.6.25-git10
Commits on Apr 26, 2008
  1. @torvalds

    Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

    torvalds authored
    …/git/x86/linux-2.6-x86-bigbox-bootmem-v3
    
    * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootmem-v3:
      x86_64/mm: check and print vmemmap allocation continuous
      x86_64: fix setup_node_bootmem to support big mem excluding with memmap
      x86_64: make reserve_bootmem_generic() use new reserve_bootmem()
      mm: allow reserve_bootmem() cross nodes
      mm: offset align in alloc_bootmem()
      mm: fix alloc_bootmem_core to use fast searching for all nodes
      mm: make mem_map allocation continuous
  2. @torvalds

    Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild

    torvalds authored
    * git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
      kbuild: scripts/Makefile.modpost typo fix
      kbuild: soften MODULE_LICENSE check
  3. x86_64/mm: check and print vmemmap allocation continuous

    Yinghai Lu authored Ingo Molnar committed
    On big systems with lots of memory, don't print out too much during
    bootup, and make it easy to find if it is continuous.
    
    on 256G 8 sockets system will get
     [ffffe20000000000-ffffe20002bfffff] PMD -> [ffff810001400000-ffff810003ffffff] on node 0
    [ffffe2001c700000-ffffe2001c7fffff] potential offnode page_structs
     [ffffe20002c00000-ffffe2001c7fffff] PMD -> [ffff81000c000000-ffff8100255fffff] on node 0
    [ffffe20038700000-ffffe200387fffff] potential offnode page_structs
     [ffffe2001c800000-ffffe200387fffff] PMD -> [ffff810820200000-ffff81083c1fffff] on node 1
     [ffffe20040000000-ffffe2007fffffff] PUD ->ffff811027a00000 on node 2
     [ffffe20038800000-ffffe2003fffffff] PMD -> [ffff811020200000-ffff8110279fffff] on node 2
    [ffffe20054700000-ffffe200547fffff] potential offnode page_structs
     [ffffe20040000000-ffffe200547fffff] PMD -> [ffff811027c00000-ffff81103c3fffff] on node 2
    [ffffe20070700000-ffffe200707fffff] potential offnode page_structs
     [ffffe20054800000-ffffe200707fffff] PMD -> [ffff811820200000-ffff81183c1fffff] on node 3
     [ffffe20080000000-ffffe200bfffffff] PUD ->ffff81202fa00000 on node 4
     [ffffe20070800000-ffffe2007fffffff] PMD -> [ffff812020200000-ffff81202f9fffff] on node 4
    [ffffe2008c700000-ffffe2008c7fffff] potential offnode page_structs
     [ffffe20080000000-ffffe2008c7fffff] PMD -> [ffff81202fc00000-ffff81203c3fffff] on node 4
    [ffffe200a8700000-ffffe200a87fffff] potential offnode page_structs
     [ffffe2008c800000-ffffe200a87fffff] PMD -> [ffff812820200000-ffff81283c1fffff] on node 5
     [ffffe200c0000000-ffffe200ffffffff] PUD ->ffff813037a00000 on node 6
     [ffffe200a8800000-ffffe200bfffffff] PMD -> [ffff813020200000-ffff8130379fffff] on node 6
    [ffffe200c4700000-ffffe200c47fffff] potential offnode page_structs
     [ffffe200c0000000-ffffe200c47fffff] PMD -> [ffff813037c00000-ffff81303c3fffff] on node 6
     [ffffe200c4800000-ffffe200e07fffff] PMD -> [ffff813820200000-ffff81383c1fffff] on node 7
    
    instead of a very long print out...
    
    Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
    Signed-off-by: Ingo Molnar <mingo@elte.hu>
    Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
  4. @yhlu

    x86_64: fix setup_node_bootmem to support big mem excluding with memmap

    yhlu authored Ingo Molnar committed
    typical case: four sockets system, every node has 4g ram, and we are using:
    
    	memmap=10g$4g
    
    to mask out memory on node1 and node2
    
    when numa is enabled, early_node_mem is used to get node_data and node_bootmap.
    
    if it can not get memory from the same node with find_e820_area(), it will
    use alloc_bootmem to get buff from previous nodes.
    
    so check it and print out some info about it.
    
    need to move early_res_to_bootmem into every setup_node_bootmem.
    and it takes range that node has. otherwise alloc_bootmem could return addr
    that reserved early.
    
    depends on "mm: make reserve_bootmem can crossed the nodes".
    
    Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
    Signed-off-by: Ingo Molnar <mingo@elte.hu>
  5. @yhlu

    x86_64: make reserve_bootmem_generic() use new reserve_bootmem()

    yhlu authored Ingo Molnar committed
    "mm: make reserve_bootmem can crossed the nodes" provides new
    reserve_bootmem(), let reserve_bootmem_generic() use that.
    
    reserve_bootmem_generic() is used to reserve initramdisk, so this way
    we can make sure even when bootloader or kexec load ranges cross the
    node memory boundaries, reserve_bootmem still works.
    
    Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
    Signed-off-by: Ingo Molnar <mingo@elte.hu>
  6. @yhlu

    mm: allow reserve_bootmem() cross nodes

    yhlu authored Ingo Molnar committed
    split reserve_bootmem_core() into two functions, one which checks
    conflicts, and one which sets the bits.
    
    and make reserve_bootmem to loop bdata_list to cross the nodes.
    
    user could be crashkernel and ramdisk..., in case the range provided
    by those externalities crosses the nodes.
    
    Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
    Signed-off-by: Ingo Molnar <mingo@elte.hu>
  7. @yhlu

    mm: offset align in alloc_bootmem()

    yhlu authored Ingo Molnar committed
    need offset alignment when node_boot_start's alignment is less than
    the alignment required.
    
    use local node_boot_start to match alignment - so don't add extra operation
    in search loop.
    
    Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
    Signed-off-by: Ingo Molnar <mingo@elte.hu>
  8. @yhlu

    mm: fix alloc_bootmem_core to use fast searching for all nodes

    yhlu authored Ingo Molnar committed
    Make the nodes other than node 0 use bdata->last_success for fast
    search too.
    
    We need to use __alloc_bootmem_core() for vmemmap allocation for other
    nodes when numa and sparsemem/vmemmap are enabled.
    
    Also, make fail_block path increase i with incr only after ALIGN
    to avoid extra increase when size is larger than align.
    
    Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
    Signed-off-by: Ingo Molnar <mingo@elte.hu>
  9. @yhlu

    mm: make mem_map allocation continuous

    yhlu authored Ingo Molnar committed
    vmemmap allocation currently has this layout:
    
     [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001400000 on node 0
     [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001800000 on node 0
     [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001c00000 on node 0
     [ffffe20000600000-ffffe200007fffff] PMD ->ffff810002000000 on node 0
     [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002400000 on node 0
    ...
    
    note that there is a 2M hole between them - not optimal.
    
    the root cause is that usemap (24 bytes) will be allocated after every 2M
    mem_map, and it will push next vmemmap (2M) to the next (2M) alignment.
    
    solution: try to allocate the mem_map continously.
    
    after the patch, we get:
    
     [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001400000 on node 0
     [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
     [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001800000 on node 0
     [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001a00000 on node 0
     [ffffe20000800000-ffffe200009fffff] PMD ->ffff810001c00000 on node 0
    ...
    
    which is the ideal layout.
    
    and usemap will share a page because of they are allocated continuously too:
    
    sparse_early_usemap_alloc: usemap = ffff810024e00000 size = 24
    sparse_early_usemap_alloc: usemap = ffff810024e00080 size = 24
    sparse_early_usemap_alloc: usemap = ffff810024e00100 size = 24
    sparse_early_usemap_alloc: usemap = ffff810024e00180 size = 24
    ...
    
    so we make the bootmem allocation more compact and use less memory
    for usemap => mission accomplished ;-)
    
    Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
    Signed-off-by: Ingo Molnar <mingo@elte.hu>
  10. @torvalds

    Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

    torvalds authored
    …/git/x86/linux-2.6-generic-bitops-v3
    
    * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-generic-bitops-v3:
      x86, bitops: select the generic bitmap search functions
      x86: include/asm-x86/pgalloc.h/bitops.h: checkpatch cleanups - formatting only
      x86: finalize bitops unification
      x86, UML: remove x86-specific implementations of find_first_bit
      x86: optimize find_first_bit for small bitmaps
      x86: switch 64-bit to generic find_first_bit
      x86: generic versions of find_first_(zero_)bit, convert i386
      bitops: use __fls for fls64 on 64-bit archs
      generic: implement __fls on all 64-bit archs
      generic: introduce a generic __fls implementation
      x86: merge the simple bitops and move them to bitops.h
      x86, generic: optimize find_next_(zero_)bit for small constant-size bitmaps
      x86, uml: fix uml with generic find_next_bit for x86
      x86: change x86 to use generic find_next_bit
      uml: Kconfig cleanup
      uml: fix build error
  11. @torvalds

    Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

    torvalds authored
    * git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (46 commits)
      ide: constify struct ide_dma_ops
      ide: add struct ide_dma_ops (take 3)
      ide: add IDE_HFLAG_SERIALIZE_DMA host flag
      sl82c105: check bridge revision in sl82c105_init_one()
      au1xxx-ide: use ->init_dma method
      palm_bk3710: use ->init_dma method
      sgiioc4: use ->init_dma method
      icside: use ->init_dma method
      ide-pmac: use ->init_dma method
      ide: do complete DMA setup in ->init_dma method (take 2)
      au1xxx-ide: fix MWDMA support
      ide: cleanup ide_setup_dma()
      ide: factor out setting PCI bus-mastering from ide_hwif_setup_dma()
      ide: export ide_allocate_dma_engine()
      ide: move ide_setup_dma() call out from ->init_dma method
      alim15x3: skip DMA initialization completely on revs < 0x20
      pdc202xx_old: remove init_dma_pdc202xx()
      ide: don't display "BIOS" settings in ide_setup_dma()
      ide: remove ->cds field from ide_hwif_t (take 2)
      ide: remove ide_dma_iobase()
      ...
  12. @torvalds

    Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

    torvalds authored
    …/git/x86/linux-2.6-x86-bigbox-bootparam
    
    * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootparam:
      x86, boot: Document for linked list of struct setup_data
      x86, boot: export linked list of struct setup_data via debugfs
      x86, boot: add linked list of struct setup_data
      x86, boot: add free_early to early reservation machanism
  13. @bzolnier

    ide: constify struct ide_dma_ops

    bzolnier authored
    * Export ide_dma_exec_cmd() and __ide_dma_test_irq().
    
    * Constify struct ide_dma_ops.
    
    * Always set hwif->dma_ops to &sff_dma_ops in ide_setup_dma()
      (it is later overriden by ide_init_port() if needed) and drop
      'const struct ide_port_info *d' argument.
    
    While at it:
    
    * Rename __ide_dma_test_irq() to ide_dma_test_irq().
    
    Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  14. @bzolnier

    ide: add struct ide_dma_ops (take 3)

    bzolnier authored
    Add struct ide_dma_ops and convert core code + drivers to use it.
    
    While at it:
    
    * Drop "ide_" prefix from ->ide_dma_end and ->ide_dma_test_irq methods.
    
    * Drop "ide_" "infixes" from DMA methods.
    
    * au1xxx-ide.c:
      - use auide_dma_{test_irq,end}() directly in auide_dma_timeout()
    
    * pdc202xx_old.c:
      - drop "old_" "infixes" from DMA methods
    
    * siimage.c:
      - add siimage_dma_test_irq() helper
      - print SATA warning in siimage_init_one()
    
    * Remove no longer needed ->init_hwif implementations.
    
    v2:
    * Changes based on review from Sergei:
      - s/siimage_ide_dma_test_irq/siimage_dma_test_irq/
      - s/drive->hwif/hwif/ in idefloppy_pc_intr().
      - fix patch description w.r.t. au1xxx-ide changes
      - fix au1xxx-ide build
      - fix naming for cmd64*_dma_ops
      - drop "ide_" and "old_" infixes
      - s/hpt3xxx_dma_ops/hpt37x_dma_ops/
      - s/hpt370x_dma_ops/hpt370_dma_ops/
      - use correct DMA ops for HPT302/N, HPT371/N and HPT374
      - s/it821x_smart_dma_ops/it821x_pass_through_dma_ops/
    
    v3:
    * Two bugs slipped in v2 (noticed by Sergei):
      - use correct DMA ops for HPT374 (for real this time)
      - handle HPT370/HPT370A properly
    
    Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  15. @bzolnier

    ide: add IDE_HFLAG_SERIALIZE_DMA host flag

    bzolnier authored
    * Add IDE_HFLAG_SERIALIZE_DMA host flag to serialize ports
      if DMA is available and handle it in ide_init_port().
    
    * Convert sl82c105 host driver to use this new flag.
    
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  16. @bzolnier

    sl82c105: check bridge revision in sl82c105_init_one()

    bzolnier authored
    * Make sl82c105_bridge_revision() return 'u8' instead of 'unsigned long'.
    
    * Check bridge revision in sl82c105_init_one().
    
    While at:
    
    * Use proper KERN_ level for printk().
    
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  17. @bzolnier

    au1xxx-ide: use ->init_dma method

    bzolnier authored
    * Pass 'ide_hwif_t *hwif' instead of '_auide_hwif *auide' to
      auide_ddma_init().
    
    * Add 'const struct ide_port_info *d' argument to auide_ddma_init().
    
    * Convert the driver to use ->init_dma method.
    
    Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  18. @bzolnier

    palm_bk3710: use ->init_dma method

    bzolnier authored
    * Move DMA setup to palm_bk3710_init_dma().
    
    * Convert the driver to use ->init_dma method.
    
    Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
    Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  19. @bzolnier

    sgiioc4: use ->init_dma method

    bzolnier authored
    * Move dma_base check from sgiioc4_ide_setup_pci_device()
      to ide_dma_sgiioc4().
    
    * Replace ide_dma_sgiioc4() 'unsigned long dma_base' argument
      by 'const struct ide_port_info *d'.
    
    * Move hwif->INB setup from ide_init_sgiioc4() to
      sgiioc4_ide_setup_pci_device().
    
    * Move ide_init_sgiioc4() call from sgiioc4_ide_setup_pci_device()
      to ide_dma_sgiioc4().
    
    * Convert the driver to use ->init_dma method.
    
    Cc: Jeremy Higdon <jeremy@sgi.com>
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  20. @bzolnier

    icside: use ->init_dma method

    bzolnier authored
    * Add 'const struct ide_port_info *d' argument to icside_dma_init().
    
    * Make icside_dma_init() return an error value and add icside_dma_off_init()
      (->init_dma implementation for case when DMA cannot be enabled).
    
    * Convert the driver to use ->init_dma method.
    
    Cc: Russell King <rmk@arm.linux.org.uk>
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  21. @bzolnier

    ide-pmac: use ->init_dma method

    bzolnier authored
    * Move pmif->dma_regs check from pmac_ide_setup_device() to
      pmac_ide_init_dma().
    
    * Get 'pmif' from 'hwif->hwif_data' in pmac_ide_init_dma() and replace
      'pmac_ide_hwif_t *pmif' argument by 'const struct ide_port_info *d'.
    
    * Add pmac_ide_init_dma() implementation for CONFIG_BLK_DEV_IDEDMA_PMAC=n
      case and convert the driver to use ->init_dma method.
    
    Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  22. @bzolnier

    ide: do complete DMA setup in ->init_dma method (take 2)

    bzolnier authored
    * Make ide_hwif_setup_dma() return an error value.
    
    * Pass 'const struct ide_port_info *d' instead of 'unsigned long dmabase'
      to ->init_dma method and make it return an error value.
    
    * Rename ide_get_or_set_dma_base() to ide_pci_dma_base(),
      change ordering of its arguments and then export it.
    
    * Export ide_pci_set_master().
    
    * Do complete DMA setup inside ->init_dma method and update ->init_dma
      users accordingly.
    
    * Sanitize code for DMA setup in ide_init_port().
    
    v2:
    * Fix for CONFIG_BLK_DEV_IDEDMA_PCI=n configs
      (from Jiri Slaby <jirislaby@gmail.com>):
    
      Fix following compiler warning by returning EINVAL:
    
      In file included from ANYTHING-INCLUDING-IDE.H:45:
      include/linux/ide.h: In function ‘ide_hwif_setup_dma’:
      include/linux/ide.h:1022: warning: no return statement in function returning non-void
    
    Cc: Jiri Slaby <jirislaby@gmail.com>
    Cc: Andrew Morton <akpm@linux-foundation.org>
    Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  23. @bzolnier

    au1xxx-ide: fix MWDMA support

    bzolnier authored
    Always use "fast" MWDMA support and remove dma_{black,white}_list
    (they were based on completely bogus ->ide_dma_check implementation
    which didn't set neither the host controller timings nor the device
    for the desired transfer mode).
    
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  24. @bzolnier

    ide: cleanup ide_setup_dma()

    bzolnier authored
    * There is no need to call ide_release_dma_engine().
    
    * Move the code up to (and including) ide_allocate_dma_engine()
      call to the callers of ide_setup_dma().
    
    There should be no functional changes caused by this patch.
    
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  25. @bzolnier

    ide: factor out setting PCI bus-mastering from ide_hwif_setup_dma()

    bzolnier authored
    Factor out setting PCI bus-mastering from ide_hwif_setup_dma()
    to ide_pci_set_master() helper.
    
    While at it:
    
    * don't read PCI Command register if not necessary
    
    * use PCI device name instead of hwif->name
    
    * cleanup ide_hwif_setup_dma() a bit
    
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  26. @bzolnier

    ide: export ide_allocate_dma_engine()

    bzolnier authored
    Export ide_allocate_dma_engine() and use it in trm290 host driver.
    
    Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  27. @bzolnier

    ide: move ide_setup_dma() call out from ->init_dma method

    bzolnier authored
    There should be no functional changes caused by this patch.
    
    Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  28. @bzolnier

    alim15x3: skip DMA initialization completely on revs < 0x20

    bzolnier authored
    Skip DMA initialization completely on revs < 0x20 by setting IDE_HFLAG_NO_DMA
    host flag and resetting DMA host masks in alim15x3_init_one() (currently
    ide_hwif_setup_dma() will try to obtain DMA base and setup PCI bus-mastering
    but init_dma_ali15x3() will fail).
    
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  29. @bzolnier

    pdc202xx_old: remove init_dma_pdc202xx()

    bzolnier authored
    Do PDC202xx specific DMA initialization in init_chipset_pdc202xx()
    and remove no longer needed init_dma_pdc202xx().
    
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  30. @bzolnier

    ide: don't display "BIOS" settings in ide_setup_dma()

    bzolnier authored
    Nowadays BIOS info is not very useful and only confuses users since:
    
    - IDE always tries to use DMA
    
    - BIOS info may not be accurate with modular IDE/libata
    
    Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  31. @bzolnier

    ide: remove ->cds field from ide_hwif_t (take 2)

    bzolnier authored
    * Use hwif->name instead of cds->name in ide_allocate_dma_engine().
    
    * Use pci_name(dev) instead of cds->name in init_dma_pdc202xx().
    
    * Remove no longer needed ->cds field from ide_hwif_t.
    
    v2:
    
    * scc_pata.c also needs to be updated now (noticed by Stephen Rothwell).
    
    There should be no functional changes caused by this patch.
    
    Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
    Cc: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
    Cc: Stephen Rothwell <sfr@canb.auug.org.au>
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  32. @bzolnier

    ide: remove ide_dma_iobase()

    bzolnier authored
    * ide_mapped_mmio_dma() and ide_iomio_dma() are called only by
      ide_dma_iobase() so inline them there.
    
    * ide_dma_iobase() is called only by ide_setup_dma() so inline
      it there.
    
    * Setup hwif->extra_base also if hwif->mmio flag is set.
    
    There should be no functional changes casued by this patch.
    
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  33. @bzolnier

    ide: remove ->extra field from struct ide_port_info

    bzolnier authored
    Always setup hwif->extra_base in ide_iomio_dma() and remove
    no longer needed ->extra field from struct ide_port_info.
    
    There should be no functional changes caused by this patch.
    
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  34. @hharrison @bzolnier

    ide: replace remaining __FUNCTION__ occurrences

    hharrison authored bzolnier committed
    __FUNCTION__ is gcc-specific, use __func__
    
    [bart: fix checkpatch.pl errors in ide-lib.c and ppc/mpc8xx.c while at it]
    
    Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
    Cc: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  35. @bzolnier

    ide-tape: remove idetape_pipeline_active()

    Borislav Petkov authored bzolnier committed
    This function was simply a wrapper for a test_bit() macro so remove it and
    use the macro instead.
    
    Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
    Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Something went wrong with that request. Please try again.