Permalink
Commits on Oct 14, 2008
  1. Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare…

    …-2.6
    
    * 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
      i2c-viapro: Add support for SMBus Process Call transactions
      i2c: Restore i2c_smbus_process_call function
      i2c: Do earlier driver model init
      i2c: Only build Tyan SMBus mux drivers on x86
      i2c: Guard against oopses from bad init sequences
      i2c: Document the implementation details of the /dev interface
      i2c: Improve dev-interface documentation
      i2c-parport-light: Don't register a platform device resource
      hwmon: (dme1737) Convert to a new-style i2c driver
      hwmon: (dme1737) Be less i2c-centric
      i2c/tps65010: Vibrator hookup to gpiolib
      i2c-viapro: Add VX800/VX820 support
      i2c: Renesas Highlander FPGA SMBus support
      i2c-pca-isa: Don't grab arbitrary resources
      i2c/isp1301_omap: Convert to a new-style i2c driver, part 2
      i2c/isp1301_omap: Convert to a new-style i2c driver, part 1
    torvalds committed Oct 14, 2008
  2. Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

    …/git/jikos/hid
    
    * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (55 commits)
      HID: build drivers for all quirky devices by default
      HID: add missing blacklist entry for Apple ATV ircontrol
      HID: add support for Bright ABNT2 brazilian device
      HID: Don't let Avermedia Radio FM800 be handled by usb hid drivers
      HID: fix numlock led on Dell device 0x413c/0x2105
      HID: remove warn() macro from usb hid drivers
      HID: remove info() macro from usb HID drivers
      HID: add appletv IR receiver quirk
      HID: fix a lockup regression when using force feedback on a PID device
      HID: hiddev.h: Fix example code.
      HID: hiddev.h: Fix mixed space and tabs in example code.
      HID: convert to dev_* prints
      HID: remove hid-ff
      HID: move zeroplus FF processing
      HID: move thrustmaster FF processing
      HID: move pantherlord FF processing
      HID: fix incorrent length condition in hidraw_write()
      HID: fix tty<->hid deadlock
      HID: ignore iBuddy devices
      HID: report descriptor fix for remaining MacBook JIS keyboards
      ...
    torvalds committed Oct 14, 2008
  3. Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/k…

    …ernel/git/mfasheh/ocfs2
    
    * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (56 commits)
      ocfs2: Make cached block reads the common case.
      ocfs2: Kill the last naked wait_on_buffer() for cached reads.
      ocfs2: Move ocfs2_bread() into dir.c
      ocfs2: Simplify ocfs2_read_block()
      ocfs2: Require an inode for ocfs2_read_block(s)().
      ocfs2: Separate out sync reads from ocfs2_read_blocks()
      ocfs2: Refactor xattr list and remove ocfs2_xattr_handler().
      ocfs2: Calculate EA hash only by its suffix.
      ocfs2: Move trusted and user attribute support into xattr.c
      ocfs2: Uninline ocfs2_xattr_name_hash()
      ocfs2: Don't check for NULL before brelse()
      ocfs2: use smaller counters in ocfs2_remove_xattr_clusters_from_cache
      ocfs2: Documentation update for user_xattr / nouser_xattr mount options
      ocfs2: make la_debug_mutex static
      ocfs2: Remove pointless !!
      ocfs2: Add empty bucket support in xattr.
      ocfs2/xattr.c: Fix a bug when inserting xattr.
      ocfs2: Add xattr mount option in ocfs2_show_options()
      ocfs2: Switch over to JBD2.
      ocfs2: Add the 'inode64' mount option.
      ...
    torvalds committed Oct 14, 2008
  4. rtc-cmos: look for PNP RTC first, then for platform RTC

    We shouldn't rely on "pnp_platform_devices" to tell us whether there
    is a PNP RTC device.
    
    I introduced "pnp_platform_devices", but I think it was a mistake.
    All it tells us is whether we found any PNPBIOS or PNPACPI devices.
    Many machines have some PNP devices, but do not describe the RTC
    via PNP.  On those machines, we need to do the platform driver probe
    to find the RTC.
    
    We should just register the PNP driver and see whether it claims anything.
    If we don't find a PNP RTC, fall back to the platform driver probe.
    
    This (in conjunction with the arch/x86/kernel/rtc.c patch to add
    a platform RTC device when PNP doesn't have one) should resolve
    these issues:
    
        http://bugzilla.kernel.org/show_bug.cgi?id=11580
        https://bugzilla.redhat.com/show_bug.cgi?id=451188
    
    Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
    Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
    Acked-by: David Brownell <dbrownell@users.sourceforge.net>
    Reported-by: Rik Theys <rik.theys@esat.kuleuven.be>
    Reported-by: shr_msn@yahoo.com.tw
    Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
    Bjorn Helgaas committed with torvalds Oct 14, 2008
  5. x86: register a platform RTC device if PNP doesn't describe it

    Most if not all x86 platforms have an RTC device, but sometimes the RTC
    is not exposed as a PNP0b00/PNP0b01/PNP0b02 device in PNPBIOS or ACPI:
    
        http://bugzilla.kernel.org/show_bug.cgi?id=11580
        https://bugzilla.redhat.com/show_bug.cgi?id=451188
    
    It's best if we can discover the RTC via PNP because then we know
    which flavor of device it is, where it lives, and which IRQ it uses.
    
    But if we can't, we should register a platform device using the
    compiled-in RTC_PORT/RTC_IRQ resource assumptions.
    
    Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
    Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
    Acked-by: David Brownell <dbrownell@users.sourceforge.net>
    Reported-by: Rik Theys <rik.theys@esat.kuleuven.be>
    Reported-by: shr_msn@yahoo.com.tw
    Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
    Bjorn Helgaas committed with torvalds Oct 14, 2008
  6. rtc-cmos: move wake setup from ACPI glue into RTC driver

    Move rtc_wake_setup() from drivers/acpi/glue.c into the RTC driver
    in drivers/rtc/rtc-cmos.c.
    
    This removes the ordering constraint between the module_init(acpi_rtc_init)
    and the cmos_do_probe() code that depends on it.
    
    Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
    Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
    Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
    Bjorn Helgaas committed with torvalds Oct 14, 2008
  7. HID: build drivers for all quirky devices by default

    Once kernel configuration has CONFIG_HID turned on, let also all the
    specialized drivers for quirky devices to be built (unless CONFIG_EMBEDDED is
    specified), as usually users don't care that much which driver
    gives them the functionality, but when they want generic support, they
    probably want to have support for all the quirky devices as well.
    
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    Jiri Kosina committed Oct 14, 2008
  8. HID: add missing blacklist entry for Apple ATV ircontrol

    This device is already handled by hid-apple driver, but the blacklist entry
    was missing in generic driver.
    
    Reported-by: Jiri Slaby <jslaby@suse.cz>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    Jiri Kosina committed Oct 14, 2008
  9. HID: add support for Bright ABNT2 brazilian device

    This keyboard needs to reset the LEDS during probe.
    
    Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    Mauro Carvalho Chehab committed with Jiri Kosina Oct 14, 2008
  10. HID: Don't let Avermedia Radio FM800 be handled by usb hid drivers

    Based on an original patch from Alexey Klimov <klimov.linux@gmail.com>,
    against kernel version 2.6.27.
    
    This device is already handled by radio-mr800 driver, and we therefore
    want usbhid not to touch it.
    
    Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    Mauro Carvalho Chehab committed with Jiri Kosina Oct 14, 2008
  11. HID: fix numlock led on Dell device 0x413c/0x2105

    This keyboard needs to re-sync numlock after probing.
    
    Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    Mauro Carvalho Chehab committed with Jiri Kosina Oct 14, 2008
  12. HID: remove warn() macro from usb hid drivers

    USB should not be having it's own printk macros, so remove warn() and
    use the system-wide standard of dev_warn() wherever possible.  In the
    few places that will not work out, use a basic printk().
    
    Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    gregkh committed with Jiri Kosina Oct 11, 2008
  13. HID: remove info() macro from usb HID drivers

    USB should not be having it's own printk macros, so remove info() and
    use the system-wide standard of dev_info() wherever possible.
    
    Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    gregkh committed with Jiri Kosina Oct 11, 2008
  14. HID: add appletv IR receiver quirk

    Similar to the existing IRCONTROL4 handling
    
    Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    jacmet committed with Jiri Kosina Oct 6, 2008
  15. HID: fix a lockup regression when using force feedback on a PID device

    Commit 8006479 introduced a spinlock in
    input_dev->event_lock, which is locked when handling input events.
    However, the hid-pidff driver sleeps when handling events as it waits for
    reports being sent to the device before changing the report contents
    again.
    This causes a system lockup when trying to use force feedback with a PID
    device, a regression introduced in 2.6.24 and 2.6.23.15.
    
    Fix it by extracting the raw report data from struct hid_report
    immediately when hid_submit_report() is called, therefore allowing
    drivers to change the contents of struct hid_report immediately without
    affecting the already-queued transfer.
    
    In hid-pidff, re-add the removed usbhid_wait_io() to
    pidff_erase_effect() instead, to prevent a full report queue from causing
    the submission to fail, thus not freeing up device memory.
    pidff_erase_effect() is not called while dev->event_lock is held.
    
    Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    anssih committed with Jiri Kosina Oct 4, 2008
  16. HID: hiddev.h: Fix example code.

    Fix hiddev.h example code.
    To get the correct usage code, you need to set report_type and
    report_id.
    
    Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    ao2 committed with Jiri Kosina Oct 2, 2008
  17. HID: hiddev.h: Fix mixed space and tabs in example code.

    Fix mixed space and tabs in example code.
    
    Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    ao2 committed with Jiri Kosina Oct 2, 2008
  18. HID: convert to dev_* prints

    Since we have a real device bound to a driver, we may use struct
    device for printing. Use dev_* functions instead of printks in
    4 drivers.
    
    Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    jirislaby committed with Jiri Kosina Sep 18, 2008
  19. HID: remove hid-ff

    hid-ff.c now calls only pidff (generic driver), the special ones are now
    in separate drivers. Invoke pidff on all non-special directly.
    
    Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    jirislaby committed with Jiri Kosina Sep 18, 2008
  20. HID: move zeroplus FF processing

    Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    jirislaby committed with Jiri Kosina Sep 18, 2008
  21. HID: move thrustmaster FF processing

    Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    jirislaby committed with Jiri Kosina Sep 18, 2008
  22. HID: move pantherlord FF processing

    Move the force feedback processing into a separate module.
    
    [jkosina@suse.cz: fix Kconfig texts a little bit]
    
    Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    jirislaby committed with Jiri Kosina Sep 18, 2008
  23. HID: fix incorrent length condition in hidraw_write()

    The bound check on the buffer length
    
    	if (count > HID_MIN_BUFFER_SIZE)
    
    is of course incorrent, the proper check is
    
    	if (count > HID_MAX_BUFFER_SIZE)
    
    Fix it.
    
    Reported-by: Jerry Ryle <jerry@mindtribe.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    Jiri Kosina committed Sep 17, 2008
  24. HID: fix tty<->hid deadlock

    hid_compat_load() runs on the default workqueue, it request_module(), it
    execs modprobe, it exits, tty flushes default workqueue, it hangs, because
    we are still in it.
    
    Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
    Tested-by: <Valdis.Kletnieks@vt.edu>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    jirislaby committed with Jiri Kosina Sep 8, 2008
  25. HID: ignore iBuddy devices

    iBuddy devices claim to be HID devices, but they are not.
    Add them to the blacklist.
    
    Signed-off-by: Remi Cattiau <remi@cattiau.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    loopingz committed with Jiri Kosina Sep 8, 2008
  26. HID: report descriptor fix for remaining MacBook JIS keyboards

    This patch fixes a problem that MacBook JIS keyboard sends wrong report
    descriptors. Although it has already been fixed in the first Core 2 Duo model,
    it still remains in other models of MacBook.
    
    Signed-off-by: Tomoya Adachi <adachi@il.is.s.u-tokyo.ac.jp>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    Tomoya Adachi committed with Jiri Kosina Sep 4, 2008
  27. HID: fix gyration build error

    Fix config symbol name in ifdef to fix build error:
    
    ERROR: "hid_compat_gyration" [drivers/hid/hid-dummy.ko] undefined!
    
    Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
    Acked-by: Jiri Slaby <jirislaby@gmail.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    Randy Dunlap committed with Jiri Kosina Sep 4, 2008
  28. HID: Autocentering support for Logitech MOMO Racing Wheel

    Current kernel has no support for autocentering for Logitech wheels.  By
    default autocentering enabled in wheel and constant effect does not work
    properly. Using USB sniffer I found command which change autocentering
    settings: 0xFE, 0x0D, 0x0R, 0x0L, 0x80, 0x00, 0x00, where R - clockwise force,
    L - counter-clockwise (0x0-0xF, 0xC = 100%).
    
    Signed-off-by: Sergey Belyashov <Sergey.Belyashov@gmail.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    b-s-a committed with Jiri Kosina Sep 2, 2008
  29. HID: fix grammo in HID_COMPAT Kconfig help text

    The Kconfig option for HID_COMPAT should read "lose", not "loose".
    
    Signed-off-by: Alex Chiang <achiang@hp.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    Alex Chiang committed with Jiri Kosina Aug 27, 2008
  30. HID: add support for Super Dual Box Pro USB PS2/PS2 adapter

    This seems to be the very same device, as already supported Smartjoy
    dual Plus, but with slightly different vendor ID. Let's support this
    one too.
    
    Reported-by: David Ashley <dashxdr@gmail.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    Jiri Kosina committed Aug 27, 2008
  31. HID: remove ignore quirk for MGE UPS devices

    This patch reverts the change made four years ago here:
    http://www.vg.kernel.org/pub/linux/kernel/people/gregkh/usb/2.4/usb-hid-2.4.25-pre7.patch
    
    UPS's made by MGE can be used with usbhid just fine, and by removing the
    ignore quirk allows them to be used with HAL so they just work when plugged
    in, without needing to be manually configured.
    
    With the ignore quirk in place a user would have to configure NUT before the
    UPS could be used, as NUT uses it's own internal USB matching framework
    to match against the USB devices, do low level control messages on the
    device and then parse the HID tables all in userspace.
    
    This is not needed, as allowing the device to be claimed as a usbhid device
    allows it to be used like any other USB UPS device. The devices correctly
    advertise the power device page which can be queried for the device state.
    
    I assume the quirk was changed so that people using < libusb 0.1.8 could
    still use NUT's internal HID code to manage the UPS.
    libusb 0.1.8 was released quite some time ago: 2004-02-11.
    
    This patch does not break NUT as in drivers/libusb.c the device is force
    unbound from the kernel driver using usb_detach_kernel_driver_np () where
    it can be controlled like normal.
    
    [jkosina@suse.cz: adapt to the new hidbus code]
    
    Signed-off-by: Richard Hughes <rhughes@redhat.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    Richard Hughes committed with Jiri Kosina Aug 27, 2008
  32. HID: introduce list for hiddev creation forcing

    Introduce a list of devices for which there is need to
    force a creation of the hiddev interface, but still they
    are operated by generic driver (i.e. certain UPS).
    
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    Jiri Kosina committed Aug 20, 2008
  33. HID: move logitech FF processing

    Merge the logitech force feedback processing directly into logitech
    driver from the usbhid core.
    
    Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    jirislaby committed with Jiri Kosina Jul 4, 2008
  34. HID: move reset leds quirk

    Move the handling of the leds resetting from the core to
    the dell and logitech drivers.
    
    Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    jirislaby committed with Jiri Kosina Jun 27, 2008
  35. HID: move connect quirks

    Move connecting from usbhid to the hid layer and fix also hidp in
    that manner.
    This removes all the ignore/force hidinput/hiddev connecting quirks.
    
    Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    jirislaby committed with Jiri Kosina Jun 26, 2008