…ernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_cmd64x: fix overclocking of UDMA0-2 modes Revert "pata_cmd64x: implement serialization as per notes"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: bnx2: Fix bnx2_netif_stop() merge error. gianfar: Fix bit definitions of IMASK_GRSC and IMASK_GTSC gianfar: Fix stats support gianfar: Fix a filer bug bnx2: fixing a timout error due not refreshing TX timers correctly can/at91: don't check platform_get_irq's return value against zero mISDN: use DECLARE_COMPLETION_ONSTACK for non-constant completion bnx2: reset_task is crashing the kernel. Fixing it. ipv6: fix an oops when force unload ipv6 module TI DaVinci EMAC: Fix MDIO bus frequency configuration e100: Fix broken cbs accounting due to missing memset. broadcom: bcm54xx_shadow_read() errors ignored in bcm54xx_adjust_rxrefclk() e1000e: LED settings in EEPROM ignored on 82571 and 82572 netxen: use module parameter correctly netns: fix net.ipv6.route.gc_min_interval_ms in netns Bluetooth: Prevent ill-timed autosuspend in USB driver Bluetooth: Fix L2CAP locking scheme regression Bluetooth: Ack L2CAP I-frames before retransmit missing packet Bluetooth: Fix unset of RemoteBusy flag for L2CAP Bluetooth: Fix PTR_ERR return of wrong pointer in hidp_setup_hid()
…linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix hotplug hang sched: Restore printk sanity
…/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (24 commits) ALSA: sbawe: fix memory detection ALSA: fix incorrect rounding direction in snd_interval_ratnum() ALSA: HDA: add powersaving hook for Realtek ALSA: HDA: remove useless mixers on Aspire 8930G ALSA: HDA: simplify Aspire 8930G verb array ALSA: hda: Set Front Mic to input vref 50% for Lenovo 3000 Y410 ALSA: hda/realtek: Remove extra .capsrc_nids initialization for ALC889_INTEL ALSA: Use kzalloc for allocating only one thing ALSA: AACI: switch to per-pcm locking ALSA: AACI: add double-rate support ALSA: AACI: factor common hw_params logic into aaci_pcm_hw_params ALSA: AACI: cleanup aaci_pcm_hw_params ALSA: AACI: simplify codec rate information ALSA: aaci - Fix a typo ASoC: wm8974: fix a wrong bit definition sound: sgio2audio/pdaudiocf/usb-audio: initialize PCM buffer ALSA: hda - Fix quirk for Maxdata obook4-1 ALSA: hda - Fix missing capsrc_nids for ALC88x ALSA: hda - Make use of beep device found in Dell Vostro 1015n ALSA: hda - Fixed internal mic initialization for Dell Vostro 1015 ...
Memory amount is increased before a successful write-read sequence is done. Thus, 512 kB of onboard memory is detected on memoryless cards like SB32. Move the increasing of memory counter after successful read is done. Signed-off-by: Krzysztof Helt <firstname.lastname@example.org> Signed-off-by: Takashi Iwai <email@example.com>
The direction of rounding is incorrect in the snd_interval_ratnum() It was detected with following parameters (sb8 driver playing 8kHz stereo file): - num is always 1000000 - requested frequency rate is from 7999 to 7999 (single frequency) The first loop calculates div_down(num, freq->min) which is 125. Thus, a frequency range's minimum value is 1000000 / 125 = 8000 Hz. The second loop calculates div_up(num, freq->max) which is 126 The frequency range's maximum value is 1000000 / 126 = 7936 Hz. The range maximum is lower than the range minimum so the function fails due to empty result range. Signed-off-by: Krzysztof Helt <firstname.lastname@example.org> Signed-off-by: Takashi Iwai <email@example.com>
The current Realtek code makes no specific provision for turning stuff off. The codec chip is placed into low-power mode generically, but this doesn't turn off any external hardware connected to it, in particular external amplifiers. This patch creates a hook function that is called by the codec suspend/resume functions. It ought to disable any external hardware in a device-specific way. I've implemented a generic ALC889 function that sets the EAPD pin properly, and used it for the Acer Aspire 8930G which can benefit from this feature. On my laptop, this results in ~0.5W extra savings. Signed-off-by: Hector Martin <firstname.lastname@example.org> Signed-off-by: Takashi Iwai <email@example.com>
This patch removes some extra mixers that do nothing on the Acer Aspire 8930G. The CD mixer is useless because the SATA DVD/Blu-Ray drive has no analog audio output, and the Side mixer is useless because we max out at 6ch anyway. Signed-off-by: Hector Martin <firstname.lastname@example.org> Signed-off-by: Takashi Iwai <email@example.com>
This patch just simplifies the 8930G verb array a bit. Just use the common ALC889 EAPD verb array to make things more consistent. The file is already huge enough already. Signed-off-by: Hector Martin <firstname.lastname@example.org> Signed-off-by: Takashi Iwai <email@example.com>
BugLink: https://bugs.launchpad.net/bugs/479373 The OR has verified with hda-verb that the internal microphone needs VREF50 set for audible capture. Signed-off-by: Daniel T Chen <firstname.lastname@example.org> Signed-off-by: Takashi Iwai <email@example.com>
A typo in 12045a6 "nfsd: let "insecure" flag vary by pseudoflavor" reversed the sense of the "insecure" flag. Reported-by: Michael Guntsche <firstname.lastname@example.org> Signed-off-by: J. Bruce Fields <email@example.com> Signed-off-by: Linus Torvalds <firstname.lastname@example.org>
The hot-unplug kstopmachine usage does a wakeup after deactivating the cpu, hence we cannot use cpu_active() here but must rely on the good olde online. Reported-by: Sachin Sant <email@example.com> Reported-by: Jens Axboe <firstname.lastname@example.org> Signed-off-by: Peter Zijlstra <email@example.com> Tested-by: Jens Axboe <firstname.lastname@example.org> Cc: Heiko Carstens <email@example.com> Cc: Benjamin Herrenschmidt <firstname.lastname@example.org> LKML-Reference: <1261326987.4314.24.camel@laptop> Signed-off-by: Ingo Molnar <email@example.com>
adev->dma_mode stores the transfer mode value not UDMA mode number so the condition in cmd64x_set_dmamode() is always true and the higher UDMA clock is always selected. This can potentially result in data corruption when UDMA33 device is used, when 40-wire cable is used or when the error recovery code decides to lower the device speed down. The issue was introduced in the commit 6a40da0 ("libata cmd64x: whack into a shape that looks like the documentation") which goes back to kernel 2.6.20. Cc: firstname.lastname@example.org Signed-off-by: Bartlomiej Zolnierkiewicz <email@example.com> Signed-off-by: Jeff Garzik <firstname.lastname@example.org>
This reverts commit d437443, because it breaks the boot on several machines (mostly sparc64, at present). Signed-off-by: Jeff Garzik <email@example.com>
Revert the braindead pr_* crap. (Commit 663997d "sched: Use pr_fmt() and pr_<level>()") It's dumb and causes stupid "sched: " strings all over the place. Signed-off-by: Peter Zijlstra <firstname.lastname@example.org> Acked-by: Mike Galbraith <email@example.com> Cc: Joe Perches <firstname.lastname@example.org> Cc: Linus Torvalds <email@example.com> Cc: Andrew Morton <firstname.lastname@example.org> LKML-Reference: <1261315437.4314.6.camel@laptop> [ i dont mind the pr_*() patterns that much - but Peter dislikes them with a vengence. ] [ - v2: remove spurious diffstat from changelog :-/ ] Signed-off-by: Ingo Molnar <email@example.com>
…9_INTEL Signed-off-by: Jaroslav Kysela <firstname.lastname@example.org>
…it/tiwai/sound-2.6 into fixes
…/git/mattst88/alpha-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: Convert BUG() to use unreachable() alpha: Add minimal support for software performance events alpha: Wire up missing/new syscalls
…ernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_mv: remove pointless NULL test pata_hpt3x2n: fix clock turnaround libata: fix reporting of drained bytes when clearing DRQ sata_mv: add power management support for the PCI controllers. sata_mv: store the board_idx into the host private data pata_octeon_cf: use resource_size(), to fix resource sizing bug libata: use the WRITE_SAME_16 define sata_mv: move the PCI bar description initialization code sata_mv: add power management support for the platform driver sata_mv: support clkdev framework sata_mv: increase PIO IORDY timeout Fixed crazy mode-change in merge.
…inux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf session: Make events_stats u64 to avoid overflow on 32-bit arches hw-breakpoints: Fix hardware breakpoints -> perf events dependency perf events: Dont report side-band events on each cpu for per-task-per-cpu events perf events, x86/stacktrace: Fix performance/softlockup by providing a special frame pointer-only stack walker perf events, x86/stacktrace: Make stack walking optional perf events: Remove unused perf_counter.h header file perf probe: Check new event name kprobe-tracer: Check new event/group name perf probe: Check whether debugfs path is correct perf probe: Fix libdwarf include path for Debian
…nux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, irq: Allow 0xff for /proc/irq/[n]/smp_affinity on an 8-cpu system Makefile: Unexport LC_ALL instead of clearing it x86: Fix objdump version check in arch/x86/tools/chkobjdump.awk x86: Reenable TSC sync check at boot, even with NONSTOP_TSC x86: Don't use POSIX character classes in gen-insn-attr-x86.awk Makefile: set LC_CTYPE, LC_COLLATE, LC_NUMERIC to C x86: Increase MAX_EARLY_RES; insufficient on 32-bit NUMA x86: Fix checking of SRAT when node 0 ram is not from 0 x86, cpuid: Add "volatile" to asm in native_cpuid() x86, msr: msrs_alloc/free for CONFIG_SMP=n x86, amd: Get multi-node CPU info from NodeId MSR instead of PCI config space x86: Add IA32_TSC_AUX MSR and use it x86, msr/cpuid: Register enough minors for the MSR and CPUID drivers initramfs: add missing decompressor error check bzip2: Add missing checks for malloc returning NULL bzip2/lzma/gzip: pre-boot malloc doesn't return NULL on failure
…linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits) sched: Fix broken assertion sched: Assert task state bits at build time sched: Update task_state_arraypwith new states sched: Add missing state chars to TASK_STATE_TO_CHAR_STR sched: Move TASK_STATE_TO_CHAR_STR near the TASK_state bits sched: Teach might_sleep() about preemptible RCU sched: Make warning less noisy sched: Simplify set_task_cpu() sched: Remove the cfs_rq dependency from set_task_cpu() sched: Add pre and post wakeup hooks sched: Move kthread_bind() back to kthread.c sched: Fix select_task_rq() vs hotplug issues sched: Fix sched_exec() balancing sched: Ensure set_task_cpu() is never called on blocked tasks sched: Use TASK_WAKING for fork wakups sched: Select_task_rq_fair() must honour SD_LOAD_BALANCE sched: Fix task_hot() test order sched: Fix set_cpu_active() in cpu_down() sched: Mark boot-cpu active before smp_init() sched: Fix cpu_clock() in NMIs, on !CONFIG_HAVE_UNSTABLE_SCHED_CLOCK ...
…inux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sys: Fix missing rcu protection for __task_cred() access signals: Fix more rcu assumptions signal: Fix racy access to __task_cred in kill_pid_info_as_uid()
…/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: timers: Remove duplicate setting of new_base in __mod_timer() clockevents: Prevent clockevent_devices list corruption on cpu hotplug
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] Use strim instead of strstrip to avoid false warnings. [S390] qdio: add counter for input queue full condition [S390] qdio: remove superfluous log entries and WARN_ONs. [S390] ptrace: dont abuse PT_PTRACED [S390] cio: fix channel path vary [S390] drivers: Correct size given to memset [S390] tape: Add pr_fmt() macro to all tape source files [S390] rename NT_PRXSTATUS to NT_S390_HIGHREGS [S390] tty: PTR_ERR return of wrong pointer in fs3270_open() [S390] s390: PTR_ERR return of wrong pointer in fallback_init_cip() [S390] dasd: PTR_ERR return of wrong pointer in [S390] dasd: move dasd-diag kmsg to dasd [S390] cio: fix drvdata usage for the console subchannel [S390] wire up sys_recvmmsg
Several leaks in audit_tree didn't get caught by commit 318b6d3, including the leak on normal exit in case of multiple rules refering to the same chunk. Signed-off-by: Al Viro <email@example.com> Signed-off-by: Linus Torvalds <firstname.lastname@example.org>
... aka "Al had badly fscked up when writing that thing and nobody noticed until Eric had fixed leaks that used to mask the breakage". The function essentially creates a copy of old array sans one element and replaces the references to elements of original (they are on cyclic lists) with those to corresponding elements of new one. After that the old one is fair game for freeing. First of all, there's a dumb braino: when we get to list_replace_init we use indices for wrong arrays - position in new one with the old array and vice versa. Another bug is more subtle - termination condition is wrong if the element to be excluded happens to be the last one. We shouldn't go until we fill the new array, we should go until we'd finished the old one. Otherwise the element we are trying to kill will remain on the cyclic lists... That crap used to be masked by several leaks, so it was not quite trivial to hit. Eric had fixed some of those leaks a while ago and the shit had hit the fan... Signed-off-by: Al Viro <email@example.com> Signed-off-by: Linus Torvalds <firstname.lastname@example.org>
Use kzalloc rather than kcalloc(1,...) The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ @@ - kcalloc(1, + kzalloc( ...) // </smpl> Signed-off-by: Julia Lawall <email@example.com> Signed-off-by: Takashi Iwai <firstname.lastname@example.org>
Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <email@example.com>
This patch updates the per rx/tx queue stats. To update the per rx queue stats a new structure has been introduced rx_q_stats. The per tx queue stats are updated via the netdev_queue structure itself. Note that we update only the tx_packtes, tx_bytes, rx_packets, rx_bytes and rx_dropped stats on a per queue basis. Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <firstname.lastname@example.org>