Party Light for Adafruit's Circuit Playground
Switch branches/tags
Nothing to show
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Failed to load latest commit information.
README.md
partylight.ino

README.md

Adafruit_CP_PartyLight

Party Light for Adafruit's Circuit Playground

The Party light uses an Adafruit Circuit Playground and a paper lantern. Use a USB cable to hold CP in the center of lantern. A long USB cable is suggested. Attach an alligator clip between pin 0 (may be changed in code) and the paper lantern's wire frame to enable the touch interface.

NOTE: Do not let the Circuit Playground touch the paper lantern, the Circuit Playground can get warm. Keep it in the center of the lantern.

The touch interface does the following: Short touch - turn lamp on or change the lamp color to one of 7 colors Long toucn - turn brightness up or down, or turn lantern off

Letting go while dimming will keep the brightness at that level. A long touch after release will increase the brightness. If held long enough while dimming, the party light will turn off.