Permalink
Switch branches/tags
Nothing to show
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
98 lines (87 sloc) 2.9 KB
////////////////////////////////////////////////////////////////////////////////
//
// Filename: usbi.h
//
// Project: XuLA2-LX25 SoC based upon the ZipCPU
//
// Purpose: This package attempts to convet a JTAG over USB based
// communication system into something similar to a serial port
// based communication system. Some differences include the fact that,
// if the USB port isn't polled, nothing comes out of the port. Hence,
// on connecting (or polling for the first time) ... there might be a
// bunch of stuff to (initially) ignore.
//
//
// Creator: Dan Gisselquist, Ph.D.
// Gisselquist Technology, LLC
//
////////////////////////////////////////////////////////////////////////////////
//
// Copyright (C) 2015-2017, Gisselquist Technology, LLC
//
// This program is free software (firmware): you can redistribute it and/or
// modify it under the terms of the GNU General Public License as published
// by the Free Software Foundation, either version 3 of the License, or (at
// your option) any later version.
//
// This program is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with this program. (It's in the $(ROOT)/doc directory. Run make with no
// target there if the PDF file isn't present.) If not, see
// <http://www.gnu.org/licenses/> for a copy.
//
// License: GPL, v3, as defined and found on www.gnu.org,
// http://www.gnu.org/licenses/gpl.html
//
//
////////////////////////////////////////////////////////////////////////////////
//
//
#ifndef USBI_H
#define USBI_H
#include <libusb.h>
#define VENDOR_ID 0x04d8
#define PRODUCT_ID 0x0ff8c
#define XESS_INTERFACE 0
#define XESS_ENDPOINT_OUT 0x01
#define XESS_ENDPOINT_IN 0x81
#define XESS_ENDPOINT_IN 0x81
//
#define JTAG_CMD 0x4f
#define GET_TDO_MASK 0x01
#define PUT_TMS_MASK 0x02
#define TMS_VAL_MASK 0x04
#define PUT_TDI_MASK 0x08
#define TDI_VAL_MASK 0x10
//
// #define USER1_INSTR 0x02 // a SIX bit two
#define USB_PKTLEN 32
#define RCV_BUFLEN 512
#define RCV_BUFMASK (RCV_BUFLEN-1)
#include "llcomms.h"
class USBI : public LLCOMMSI { // USB Interface
private:
char m_rbuf[RCV_BUFLEN];
char m_txbuf[2*USB_PKTLEN], m_rxbuf[2*USB_PKTLEN];
int m_rbeg, m_rend;
libusb_context *m_usb_context;
libusb_device **m_usb_dev_list;
libusb_device_handle *m_xula_usb_device;
virtual int pop_fifo(char *buf, int len);
virtual void push_fifo(char *buf, int len);
virtual void raw_read(int len, int timeout_ms);
virtual void flush_read(void);
public:
USBI(void);
virtual void close(void);
virtual int read(char *buf, int len);
virtual int read(char *buf, int len, int timeout_ms);
virtual void write(char *buf, int len);
virtual bool poll(unsigned ms);
virtual int available(void);
};
#endif // USBI_H