Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
tree: 9af40178a8
Fetching contributors…

Cannot retrieve contributors at this time

23 lines (14 sloc) 1.326 kb
USB to Serial firmware used on the SparkFun ATmega8U2 Breakout Board, DEV-10277.
This project is based off of the LUFA project and Arduino USB to Serial project. The firmware needs to be compiled against LUFA 100807. To do this, download LUFA and add only the LUFA directory (/LUFA 100807/LUFA) to the sparkfun_USBtoSerial project along side the Projects and Bootloaders directories.
Use:
The USB to Serial Project firmware allows the Atmega8U2 to enumerate as a SparkFun COM Port, similar to the common FTDI chip. When asked for a driver, point to the sparkfun_USBtoSerial_driver.inf file.
Load code:
The sparkFun_USBtoSerial_combined.hex has both the bootloader and USB to Serial firmware. This is the hex file installed on the SparkFun Atmega8U2 Breakout. Here is the command to burn the combined hex:
Load combined hex:
STK500 -datmega8u2 -cUSB -I150kHz -e -pf -vf -ifsparkfun_USBtoSerial_combined.hex -ms -fD9FF -EF4 -lCF -LCF
Directories:
The Bootloaders directory contains the DFU bootloader firmware.
The Projects folder contains the USB to Serial firmware using the SparkFun VID and needs to be used with the sparkfun_USBtoSerial_driver.inf driver. SparkFun paid for the VID, so please only use for development only.
ATmega8U2 Hardware Config:
Fuses - HF: 0xD9, LF: 0xFF, EF:0xF4, Lock:0x0F
16MHz crystal
Jump to Line
Something went wrong with that request. Please try again.