Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Browse files

moving to github

  • Loading branch information...
commit ed6238b8211eff7724a9696e2e8fc4cfb3935610 0 parents
Adolfo Builes authored
Showing with 13,146 additions and 0 deletions.
  1. +52 −0 entrega
  2. +4,702 −0 entrega3/IEEEtran.cls
  3. +47 −0 entrega3/entrega3.aux
  4. +466 −0 entrega3/entrega3.log
  5. BIN  entrega3/entrega3.pdf
  6. +781 −0 entrega3/entrega3.tex
  7. BIN  entrega3/sumaMatrices.dia
  8. +4,702 −0 entrega4/IEEEtran.cls
  9. +1 −0  entrega4/clean
  10. +25 −0 entrega4/entrega4.aux
  11. +442 −0 entrega4/entrega4.log
  12. BIN  entrega4/entrega4.pdf
  13. +834 −0 entrega4/entrega4.tex
  14. +819 −0 entrega4/entrega4.tex.b
  15. +50 −0 entrega4/escalar.asm
  16. BIN  entrega4/matrix_transpose_flowchart.dia
  17. +52 −0 entrega4/restaDeMatrices.asm
  18. +53 −0 entrega4/sumaDeMatrices.asm
  19. +72 −0 entrega5/matrix.asm
  20. BIN  entrega5/matrix.o
  21. +48 −0 entrega5/operaciones.c
  22. BIN  jpeg/escalar1.jpeg
  23. BIN  jpeg/escalar2.jpeg
  24. BIN  jpeg/escalar3.jpeg
  25. BIN  jpeg/fancyhdr.pdf
  26. BIN  jpeg/j.jpeg
  27. BIN  jpeg/logoeafit.jpg
  28. BIN  jpeg/multi1.jpeg
  29. BIN  jpeg/multi2.jpeg
  30. BIN  jpeg/multi3.jpeg
  31. BIN  jpeg/multiplicacion3.xcf
  32. BIN  jpeg/resta1.jpeg
  33. BIN  jpeg/resta2.jpeg
  34. BIN  jpeg/resta3.jpeg
  35. BIN  jpeg/suma2.jpeg
  36. BIN  jpeg/suma3.jpeg
  37. BIN  jpeg/sumaMatrices (1).jpeg
  38. BIN  jpeg/sumaMatricesSegunda.jpeg
  39. BIN  jpeg/sumaParte1.jpeg
  40. BIN  jpeg/transpuesta.jpeg
52 entrega
@@ -0,0 +1,52 @@
+segment .data
+matriz1: dq 4.0,1.0,4.0,1.0,4.0,1.0,4.0,1.0,4.0,1.0
+matriz2: dq 3.0,1.0,4.0,1.0,4.0,1.0,4.0,1.0,4.0,1.0
+ msg2: db "%lf ,",10,0
+
+segment .bss
+matriz3: resq 10
+aux: resd 1
+aux2: resd 1
+aux3: resq 1
+
+segment .text
+ global main
+ extern printf
+main:
+ mov eax,matriz1
+ mov ebx,matriz2
+ mov edx,matriz3
+ mov ecx,10
+ jmp lp
+
+lp:
+ fld qword [eax]
+ fld qword [ebx]
+ faddp st1
+ fstp qword [edx]
+ add eax,8
+ add ebx,8
+ add edx,8
+ loop lp
+ mov ecx,10
+ mov eax,matriz3
+ call printm
+ jmp exit
+
+printm:
+ mov [aux],eax
+ mov [aux2],ecx
+ push dword [eax+4]
+ push dword [eax]
+ push dword msg2
+ call printf
+ add esp,12
+ mov eax,[aux]
+ mov ecx,[aux2]
+ add eax,8
+ loop printm
+
+exit:
+ mov eax,1
+ mov ebx,0
+ int 0x80
4,702 entrega3/IEEEtran.cls
4,702 additions, 0 deletions not shown
47 entrega3/entrega3.aux
@@ -0,0 +1,47 @@
+\relax
+\@writefile{toc}{\contentsline {section}{\numberline {I}Refinando los algoritmos}{1}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {I-A}}Refinando la suma de matrices}{1}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {I-A}1}Vista general}{1}}
+\@writefile{lof}{\contentsline {figure}{\numberline {1}{\ignorespaces Suma de matrices}}{1}}
+\newlabel{fig_sim}{{1}{1}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {I-A}2}Vista en profundidad 1}{1}}
+\@writefile{lof}{\contentsline {figure}{\numberline {2}{\ignorespaces Suma de matrices}}{1}}
+\newlabel{fig_sim}{{2}{1}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {I-A}3}Vista en profundidad 2}{1}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3}{\ignorespaces Suma de matrices}}{1}}
+\newlabel{fig_sim}{{3}{1}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {I-B}}Refinando la resta de matrices}{1}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {I-B}1}Vista general}{1}}
+\@writefile{lof}{\contentsline {figure}{\numberline {4}{\ignorespaces Resta de matrices}}{1}}
+\newlabel{fig_sim}{{4}{1}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {I-B}2}Vista en profundidad 1}{1}}
+\@writefile{lof}{\contentsline {figure}{\numberline {5}{\ignorespaces Resta de matrices}}{2}}
+\newlabel{fig_sim}{{5}{2}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {I-B}3}Vista en profundidad 2}{2}}
+\@writefile{lof}{\contentsline {figure}{\numberline {6}{\ignorespaces Resta de matrices}}{2}}
+\newlabel{fig_sim}{{6}{2}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {I-C}}Multiplaci\'on de matriz por un escalar}{2}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {I-C}1}Vista general}{2}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {I-C}2}Vista en profundidad 1}{2}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {I-C}3}Vista en profundidad 2}{2}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {I-D}}Multiplaci\'on de matrices}{2}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {I-D}1}Vista general}{2}}
+\@writefile{lof}{\contentsline {figure}{\numberline {7}{\ignorespaces Matriz por escalar}}{2}}
+\newlabel{fig_sim}{{7}{2}}
+\@writefile{lof}{\contentsline {figure}{\numberline {8}{\ignorespaces Matriz por escalar}}{2}}
+\newlabel{fig_sim}{{8}{2}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {I-D}2}Vista en profundidad 1}{2}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {I-D}3}Vista en profundidad 2}{2}}
+\@writefile{lof}{\contentsline {figure}{\numberline {9}{\ignorespaces Matriz por escalar}}{3}}
+\newlabel{fig_sim}{{9}{3}}
+\@writefile{lof}{\contentsline {figure}{\numberline {10}{\ignorespaces Multiplicaci\'on de matrices}}{3}}
+\newlabel{fig_sim}{{10}{3}}
+\@writefile{toc}{\contentsline {section}{\numberline {II}Promedio de un vector de 10 posiciones}{3}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {II-A}}Programa en Assembly}{3}}
+\@writefile{lof}{\contentsline {figure}{\numberline {11}{\ignorespaces Multiplicaci\'on de matrices}}{3}}
+\newlabel{fig_sim}{{11}{3}}
+\@writefile{lof}{\contentsline {figure}{\numberline {12}{\ignorespaces Multiplicaci\'on de matrices}}{4}}
+\newlabel{fig_sim}{{12}{4}}
+\@writefile{toc}{\contentsline {section}{\numberline {III}Conclusiones}{4}}
+\@writefile{toc}{\contentsline {section}{\numberline {IV}Bibliograf\'ia}{4}}
+\newlabel{LastPage}{{}{4}}
466 entrega3/entrega3.log
@@ -0,0 +1,466 @@
+This is pdfTeXk, Version 3.141592-1.40.3 (Web2C 7.5.6) (format=pdflatex 2010.3.12) 19 MAR 2010 08:18
+entering extended mode
+ %&-line parsing enabled.
+**entrega3.tex
+(./entrega3.tex
+LaTeX2e <2005/12/01>
+Babel <v3.8h> and hyphenation patterns for english, usenglishmax, dumylang, noh
+yphenation, loaded.
+(./IEEEtran.cls
+Document Class: IEEEtran 2007/03/05 V1.7a by Michael Shell
+-- See the "IEEEtran_HOWTO" manual for usage information.
+-- http://www.michaelshell.org/tex/ieeetran/
+\@IEEEtrantmpdimenA=\dimen102
+\@IEEEtrantmpdimenB=\dimen103
+\@IEEEtrantmpcountA=\count79
+\@IEEEtrantmpcountB=\count80
+\@IEEEtrantmptoksA=\toks14
+LaTeX Font Info: Try loading font information for OT1+ptm on input line 366.
+
+(/usr/share/texmf-texlive/tex/latex/psnfss/ot1ptm.fd
+File: ot1ptm.fd 2001/06/04 font definitions for OT1/ptm.
+)
+-- Using 8.5in x 11in (letter) paper.
+-- Using PDF output.
+\@IEEEnormalsizeunitybaselineskip=\dimen104
+-- This is a 10 point document.
+\CLASSINFOnormalsizebaselineskip=\dimen105
+\CLASSINFOnormalsizeunitybaselineskip=\dimen106
+\IEEEnormaljot=\dimen107
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <5> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <5> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <7> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <7> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <8> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <8> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <9> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <9> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <10> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <10> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <11> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <11> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <12> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <12> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <17> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <17> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <20> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <20> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <24> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <24> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+\IEEEilabelindentA=\dimen108
+\IEEEilabelindentB=\dimen109
+\IEEEilabelindent=\dimen110
+\IEEEelabelindent=\dimen111
+\IEEEdlabelindent=\dimen112
+\IEEElabelindent=\dimen113
+\IEEEiednormlabelsep=\dimen114
+\IEEEiedmathlabelsep=\dimen115
+\IEEEiedtopsep=\skip41
+\c@section=\count81
+\c@subsection=\count82
+\c@subsubsection=\count83
+\c@paragraph=\count84
+\c@IEEEsubequation=\count85
+\abovecaptionskip=\skip42
+\belowcaptionskip=\skip43
+\c@figure=\count86
+\c@table=\count87
+\@IEEEeqnnumcols=\count88
+\@IEEEeqncolcnt=\count89
+\@IEEEtmpitemindent=\dimen116
+\c@IEEEbiography=\count90
+\@IEEEtranrubishbin=\box26
+) (/usr/share/texmf-texlive/tex/latex/fancyhdr/fancyhdr.sty
+\fancy@headwidth=\skip44
+\f@ncyO@elh=\skip45
+\f@ncyO@erh=\skip46
+\f@ncyO@olh=\skip47
+\f@ncyO@orh=\skip48
+\f@ncyO@elf=\skip49
+\f@ncyO@erf=\skip50
+\f@ncyO@olf=\skip51
+\f@ncyO@orf=\skip52
+)
+(/usr/share/texmf-texlive/tex/latex/amsmath/amsmath.sty
+Package: amsmath 2000/07/18 v2.13 AMS math features
+\@mathmargin=\skip53
+
+For additional information on amsmath, use the `?' option.
+(/usr/share/texmf-texlive/tex/latex/amsmath/amstext.sty
+Package: amstext 2000/06/29 v2.01
+
+(/usr/share/texmf-texlive/tex/latex/amsmath/amsgen.sty
+File: amsgen.sty 1999/11/30 v2.0
+\@emptytoks=\toks15
+\ex@=\dimen117
+))
+(/usr/share/texmf-texlive/tex/latex/amsmath/amsbsy.sty
+Package: amsbsy 1999/11/29 v1.2d
+\pmbraise@=\dimen118
+)
+(/usr/share/texmf-texlive/tex/latex/amsmath/amsopn.sty
+Package: amsopn 1999/12/14 v2.01 operator names
+)
+\inf@bad=\count91
+LaTeX Info: Redefining \frac on input line 211.
+\uproot@=\count92
+\leftroot@=\count93
+LaTeX Info: Redefining \overline on input line 307.
+\classnum@=\count94
+\DOTSCASE@=\count95
+LaTeX Info: Redefining \ldots on input line 379.
+LaTeX Info: Redefining \dots on input line 382.
+LaTeX Info: Redefining \cdots on input line 467.
+\Mathstrutbox@=\box27
+\strutbox@=\box28
+\big@size=\dimen119
+LaTeX Font Info: Redeclaring font encoding OML on input line 567.
+LaTeX Font Info: Redeclaring font encoding OMS on input line 568.
+\macc@depth=\count96
+\c@MaxMatrixCols=\count97
+\dotsspace@=\muskip10
+\c@parentequation=\count98
+\dspbrk@lvl=\count99
+\tag@help=\toks16
+\row@=\count100
+\column@=\count101
+\maxfields@=\count102
+\andhelp@=\toks17
+\eqnshift@=\dimen120
+\alignsep@=\dimen121
+\tagshift@=\dimen122
+\tagwidth@=\dimen123
+\totwidth@=\dimen124
+\lineht@=\dimen125
+\@envbody=\toks18
+\multlinegap=\skip54
+\multlinetaggap=\skip55
+\mathdisplay@stack=\toks19
+LaTeX Info: Redefining \[ on input line 2666.
+LaTeX Info: Redefining \] on input line 2667.
+)
+(/usr/share/texmf-texlive/tex/latex/amsfonts/amsfonts.sty
+Package: amsfonts 2001/10/25 v2.2f
+\symAMSa=\mathgroup4
+\symAMSb=\mathgroup5
+LaTeX Font Info: Overwriting math alphabet `\mathfrak' in version `bold'
+(Font) U/euf/m/n --> U/euf/b/n on input line 132.
+)
+(/usr/share/texmf-texlive/tex/latex/amscls/amsthm.sty
+Package: amsthm 2004/08/06 v2.20
+\thm@style=\toks20
+\thm@bodyfont=\toks21
+\thm@headfont=\toks22
+\thm@notefont=\toks23
+\thm@headpunct=\toks24
+\thm@preskip=\skip56
+\thm@postskip=\skip57
+\thm@headsep=\skip58
+\dth@everypar=\toks25
+)
+(/usr/share/texmf-texlive/tex/latex/amsfonts/amssymb.sty
+Package: amssymb 2002/01/22 v2.2d
+)
+(/usr/share/texmf-texlive/tex/latex/setspace/setspace.sty
+Package: setspace 2000/12/01 6.7 Contributed and Supported LaTeX2e package
+
+Package: `setspace' 6.7 <2000/12/01>
+) (/usr/share/texmf-texlive/tex/latex/Tabbing/Tabbing.sty
+Package: Tabbing 1997/12/18 v1.0 Tabbing environment (JPFD)
+)
+(/usr/share/texmf/tex/latex/dblatex/misc/lastpage.sty
+Package: lastpage 1994/06/25 v0.1b LaTeX2e package for refs to last page number
+ (JPG)
+)
+(/usr/share/texmf-texlive/tex/latex/fancyhdr/extramarks.sty
+\@temptokenb=\toks26
+)
+(/usr/share/texmf-texlive/tex/latex/ltxmisc/chngpage.sty
+Package: chngpage 2003/08/10 v1.2 change page layout
+\c@cp@cnt=\count103
+\c@cp@tempcnt=\count104
+)
+(/usr/share/texmf-texlive/tex/latex/soul/soul.sty
+Package: soul 2003/11/17 v2.4 letterspacing/underlining (mf)
+\SOUL@word=\toks27
+\SOUL@lasttoken=\toks28
+\SOUL@cmds=\toks29
+\SOUL@buffer=\toks30
+\SOUL@token=\toks31
+\SOUL@spaceskip=\skip59
+\SOUL@ttwidth=\dimen126
+\SOUL@uldp=\dimen127
+\SOUL@ulht=\dimen128
+)
+(/usr/share/texmf-texlive/tex/latex/graphics/color.sty
+Package: color 2005/11/14 v1.0j Standard LaTeX Color (DPC)
+
+(/etc/texmf/tex/latex/config/color.cfg
+File: color.cfg 2007/01/18 v1.5 color configuration of teTeX/TeXLive
+)
+Package color Info: Driver file: pdftex.def on input line 130.
+
+(/usr/share/texmf-texlive/tex/latex/pdftex-def/pdftex.def
+File: pdftex.def 2007/01/08 v0.04d Graphics/color for pdfTeX
+\Gread@gobject=\count105
+))
+(/usr/share/texmf-texlive/tex/latex/graphics/graphicx.sty
+Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR)
+
+(/usr/share/texmf-texlive/tex/latex/graphics/keyval.sty
+Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
+\KV@toks@=\toks32
+)
+(/usr/share/texmf-texlive/tex/latex/graphics/graphics.sty
+Package: graphics 2006/02/20 v1.0o Standard LaTeX Graphics (DPC,SPQR)
+
+(/usr/share/texmf-texlive/tex/latex/graphics/trig.sty
+Package: trig 1999/03/16 v1.09 sin cos tan (DPC)
+)
+(/etc/texmf/tex/latex/config/graphics.cfg
+File: graphics.cfg 2007/01/18 v1.5 graphics configuration of teTeX/TeXLive
+)
+Package graphics Info: Driver file: pdftex.def on input line 90.
+)
+\Gin@req@height=\dimen129
+\Gin@req@width=\dimen130
+)
+(/usr/share/texmf-texlive/tex/latex/ltxmisc/url.sty
+\Urlmuskip=\muskip11
+Package: url 2005/06/27 ver 3.2 Verb mode for urls, etc.
+)
+No file entrega3.aux.
+\openout1 = `entrega3.aux'.
+
+LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 368.
+LaTeX Font Info: ... okay on input line 368.
+LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 368.
+LaTeX Font Info: ... okay on input line 368.
+LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 368.
+LaTeX Font Info: ... okay on input line 368.
+LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 368.
+LaTeX Font Info: ... okay on input line 368.
+LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 368.
+LaTeX Font Info: ... okay on input line 368.
+LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 368.
+LaTeX Font Info: ... okay on input line 368.
+(/usr/share/texmf/tex/context/base/supp-pdf.tex
+[Loading MPS to PDF converter (version 2006.09.02).]
+\scratchcounter=\count106
+\scratchdimen=\dimen131
+\scratchbox=\box29
+\nofMPsegments=\count107
+\nofMParguments=\count108
+\everyMPshowfont=\toks33
+\MPscratchCnt=\count109
+\MPscratchDim=\dimen132
+\MPnumerator=\count110
+\everyMPtoPDFconversion=\toks34
+)
+Missing character: There is no � in font ptmr7t!
+Missing character: There is no � in font ptmr7t!
+Missing character: There is no � in font ptmr7t!
+Missing character: There is no � in font ptmr7t!
+ </home/abuiles/jpeg/sumaParte1.jpeg, id=1, 1030.85126pt x 502.87875pt>
+File: /home/abuiles/jpeg/sumaParte1.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/sumaParte1.jpeg>
+</home/abuiles/jpeg/suma2.jpeg, id=2, 495.8525pt x 450.68375pt>
+File: /home/abuiles/jpeg/suma2.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/suma2.jpeg>
+</home/abuiles/jpeg/suma3.jpeg, id=3, 714.67pt x 1023.825pt>
+File: /home/abuiles/jpeg/suma3.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/suma3.jpeg>
+
+LaTeX Warning: `h' float specifier changed to `ht'.
+
+</home/abuiles/jpeg/resta1.jpeg, id=4, 647.41875pt x 294.09875pt>
+File: /home/abuiles/jpeg/resta1.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/resta1.jpeg>
+</home/abuiles/jpeg/logoeafit.jpg, id=5, 200.75pt x 91.34125pt>
+File: /home/abuiles/jpeg/logoeafit.jpg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/logoeafit.jpg>
+
+Package Fancyhdr Warning: \headheight is too small (12.0pt):
+ Make it at least 36.48285pt.
+ We now make it that large for the rest of the document.
+ This may cause the page layout to be inconsistent, however.
+
+
+LaTeX Warning: Reference `LastPage' on page 1 undefined on input line 518.
+
+[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}
+
+
+ </home/abuiles/jpeg/logoeafit.jpg> </home/abuiles/jpeg/sumaParte1.jpeg> </home
+/abuiles/jpeg/suma2.jpeg> </home/abuiles/jpeg/suma3.jpeg> </home/abuiles/jpeg/r
+esta1.jpeg>]
+</home/abuiles/jpeg/resta2.jpeg, id=14, 493.845pt x 460.72125pt>
+File: /home/abuiles/jpeg/resta2.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/resta2.jpeg>
+</home/abuiles/jpeg/resta3.jpeg, id=15, 728.7225pt x 994.71625pt>
+File: /home/abuiles/jpeg/resta3.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/resta3.jpeg>
+</home/abuiles/jpeg/escalar1.jpeg, id=16, 720.6925pt x 353.32pt>
+File: /home/abuiles/jpeg/escalar1.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/escalar1.jpeg>
+
+LaTeX Warning: `!h' float specifier changed to `!ht'.
+
+</home/abuiles/jpeg/escalar2.jpeg, id=17, 611.28375pt x 453.695pt>
+File: /home/abuiles/jpeg/escalar2.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/escalar2.jpeg>
+
+LaTeX Warning: `h' float specifier changed to `ht'.
+
+</home/abuiles/jpeg/escalar3.jpeg, id=18, 642.4pt x 1003.75pt>
+File: /home/abuiles/jpeg/escalar3.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/escalar3.jpeg>
+
+LaTeX Warning: `h' float specifier changed to `ht'.
+
+</home/abuiles/jpeg/multi1.jpeg, id=19, 662.475pt x 341.275pt>
+File: /home/abuiles/jpeg/multi1.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/multi1.jpeg>
+
+LaTeX Warning: `!h' float specifier changed to `!ht'.
+
+</home/abuiles/jpeg/multi2.jpeg, id=20, 587.19376pt x 441.65pt>
+File: /home/abuiles/jpeg/multi2.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/multi2.jpeg>
+
+LaTeX Warning: `h' float specifier changed to `ht'.
+
+</home/abuiles/jpeg/multi3.jpeg, id=21, 630.355pt x 1549.79pt>
+File: /home/abuiles/jpeg/multi3.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/multi3.jpeg>
+
+LaTeX Warning: `h' float specifier changed to `ht'.
+
+File: /home/abuiles/jpeg/logoeafit.jpg Graphic file (type jpg)
+<use /home/abuiles/jpeg/logoeafit.jpg>
+
+LaTeX Warning: Reference `LastPage' on page 2 undefined on input line 596.
+
+[2 </home/abuiles/jpeg/resta2.jpeg> </home/abuiles/jpeg/resta3.jpeg> </home/abu
+iles/jpeg/escalar1.jpeg> </home/abuiles/jpeg/escalar2.jpeg>]
+Missing character: There is no � in font ptmr7t!
+Missing character: There is no � in font ptmr7t!
+Missing character: There is no � in font ptmr7t!
+Missing character: There is no � in font ptmr7t!
+Missing character: There is no � in font ptmr7t!
+Missing character: There is no � in font ptmr7t!
+Missing character: There is no � in font ptmr7t!
+Missing character: There is no � in font ptmr7t!
+
+Underfull \hbox (badness 10000) in paragraph at lines 684--733
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 684--733
+
+ []
+
+
+Underfull \vbox (badness 10000) has occurred while \output is active []
+
+File: /home/abuiles/jpeg/logoeafit.jpg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/logoeafit.jpg>
+
+LaTeX Warning: Reference `LastPage' on page 3 undefined on input line 739.
+
+[3 </home/abuiles/jpeg/escalar3.jpeg> </home/abuiles/jpeg/multi1.jpeg> </home/a
+builes/jpeg/multi2.jpeg>]
+LaTeX Font Info: Try loading font information for U+msa on input line 771.
+ (/usr/share/texmf-texlive/tex/latex/amsfonts/umsa.fd
+File: umsa.fd 2002/01/19 v2.2g AMS font definitions
+)
+LaTeX Font Info: Try loading font information for U+msb on input line 771.
+(/usr/share/texmf-texlive/tex/latex/amsfonts/umsb.fd
+File: umsb.fd 2002/01/19 v2.2g AMS font definitions
+)
+Missing character: There is no � in font ptmr7t!
+Missing character: There is no � in font ptmr7t!
+
+Underfull \hbox (badness 2119) in paragraph at lines 771--772
+[]\OT1/ptm/m/n/10 [1] $http : / / es . wikipedia . org / wiki / Matriz[](matemt
+ica)$, Vis-i-
+ []
+
+
+** Conference Paper **
+Before submitting the final camera ready copy, remember to:
+
+ 1. Manually equalize the lengths of two columns on the last page
+ of your paper;
+
+ 2. Ensure that any PostScript and/or PDF output post-processing
+ uses only Type 1 fonts and that every step in the generation
+ process uses the appropriate paper size.
+
+AED: lastpage setting LastPage
+File: /home/abuiles/jpeg/logoeafit.jpg Graphic file (type jpg)
+ <use /home/abuiles/jpeg/logoeafit.jpg>
+
+LaTeX Warning: Reference `LastPage' on page 4 undefined on input line 779.
+
+[4 </home/abuiles/jpeg/multi3.jpeg>] (./entrega3.aux)
+
+LaTeX Warning: There were undefined references.
+
+
+LaTeX Warning: Label(s) may have changed. Rerun to get cross-references right.
+
+ )
+Here is how much of TeX's memory you used:
+ 3095 strings out of 95086
+ 43495 string characters out of 1183255
+ 95213 words of memory out of 1500000
+ 6222 multiletter control sequences out of 10000+50000
+ 36126 words of font info for 72 fonts, out of 1200000 for 2000
+ 31 hyphenation exceptions out of 8191
+ 30i,15n,43p,521b,317s stack positions out of 5000i,500n,6000p,200000b,5000s
+{/usr/share/texmf-texlive/fonts/enc/dvips/base/8r.enc}</usr/share/texmf-texli
+ve/fonts/type1/urw/times/utmb8a.pfb></usr/share/texmf-texlive/fonts/type1/urw/t
+imes/utmbi8a.pfb></usr/share/texmf-texlive/fonts/type1/urw/times/utmr8a.pfb></u
+sr/share/texmf-texlive/fonts/type1/urw/times/utmri8a.pfb>
+Output written on entrega3.pdf (4 pages, 724196 bytes).
+PDF statistics:
+ 45 PDF objects out of 1000 (max. 8388607)
+ 0 named destinations out of 1000 (max. 131072)
+ 66 words of extra memory for PDF output out of 10000 (max. 10000000)
+
BIN  entrega3/entrega3.pdf
Binary file not shown
781 entrega3/entrega3.tex
@@ -0,0 +1,781 @@
+
+%% bare_conf.tex
+%% V1.3
+%% 2007/01/11
+%% by Michael Shell
+%% See:
+%% http://www.michaelshell.org/
+%% for current contact information.
+%%
+%% This is a skeleton file demonstrating the use of IEEEtran.cls
+%% (requires IEEEtran.cls version 1.7 or later) with an IEEE conference paper.
+%%
+%% Support sites:
+%% http://www.michaelshell.org/tex/ieeetran/
+%% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/
+%% and
+%% http://www.ieee.org/
+
+%%*************************************************************************
+%% Legal Notice:
+%% This code is offered as-is without any warranty either expressed or
+%% implied; without even the implied warranty of MERCHANTABILITY or
+%% FITNESS FOR A PARTICULAR PURPOSE!
+%% User assumes all risk.
+%% In no event shall IEEE or any contributor to this code be liable for
+%% any damages or losses, including, but not limited to, incidental,
+%% consequential, or any other damages, resulting from the use or misuse
+%% of any information contained here.
+%%
+%% All comments are the opinions of their respective authors and are not
+%% necessarily endorsed by the IEEE.
+%%
+%% This work is distributed under the LaTeX Project Public License (LPPL)
+%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used,
+%% distributed and modified. A copy of the LPPL, version 1.3, is included
+%% in the base LaTeX documentation of all distributions of LaTeX released
+%% 2003/12/01 or later.
+%% Retain all contribution notices and credits.
+%% ** Modified files should be clearly indicated as such, including **
+%% ** renaming them and changing author support contact information. **
+%%
+%% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex,
+%% bare_conf.tex, bare_jrnl.tex, bare_jrnl_compsoc.tex
+%%*************************************************************************
+
+% *** Authors should verify (and, if needed, correct) their LaTeX system ***
+% *** with the testflow diagnostic prior to trusting their LaTeX platform ***
+% *** with production work. IEEE's font choices can trigger bugs that do ***
+% *** not appear when using other class files. ***
+% The testflow support page is at:
+% http://www.michaelshell.org/tex/testflow/
+
+
+
+% Note that the a4paper option is mainly intended so that authors in
+% countries using A4 can easily print to A4 and see how their papers will
+% look in print - the typesetting of the document will not typically be
+% affected with changes in paper size (but the bottom and side margins will).
+% Use the testflow package mentioned above to verify correct handling of
+% both paper sizes by the user's LaTeX system.
+%
+% Also note that the "draftcls" or "draftclsnofoot", not "draft", option
+% should be used if it is desired that the figures are to be displayed in
+% draft mode.
+%
+\documentclass[conference]{IEEEtran}
+% Add the compsoc option for Computer Society conferences.
+%
+% If IEEEtran.cls has not been installed into the LaTeX system files,
+% manually specify the path to it like:
+% \documentclass[conference]{../sty/IEEEtran}
+
+
+
+
+
+% Some very useful LaTeX packages include:
+% (uncomment the ones you want to load)
+
+
+% *** MISC UTILITY PACKAGES ***
+%
+%\usepackage{ifpdf}
+% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional
+% compilation based on whether the output is pdf or dvi.
+% usage:
+% \ifpdf
+% % pdf code
+% \else
+% % dvi code
+% \fi
+% The latest version of ifpdf.sty can be obtained from:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/
+% Also, note that IEEEtran.cls V1.7 and later provides a builtin
+% \ifCLASSINFOpdf conditional that works the same way.
+% When switching from latex to pdflatex and vice-versa, the compiler may
+% have to be run twice to clear warning/error messages.
+
+
+
+
+
+
+% *** CITATION PACKAGES ***
+%
+%\usepackage{cite}
+% cite.sty was written by Donald Arseneau
+% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package
+% \cite{} output to follow that of IEEE. Loading the cite package will
+% result in citation numbers being automatically sorted and properly
+% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using
+% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's
+% \cite will automatically add leading space, if needed. Use cite.sty's
+% noadjust option (cite.sty V3.8 and later) if you want to turn this off.
+% cite.sty is already installed on most LaTeX systems. Be sure and use
+% version 4.0 (2003-05-27) and later if using hyperref.sty. cite.sty does
+% not currently provide for hyperlinked citations.
+% The latest version can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/cite/
+% The documentation is contained in the cite.sty file itself.
+
+
+
+\usepackage{fancyhdr}
+\usepackage{amsmath,amsfonts,amsthm,amssymb}
+\usepackage{setspace}
+\usepackage{Tabbing}
+\usepackage{lastpage}
+\usepackage{extramarks}
+\usepackage{chngpage}
+\usepackage{soul,color}
+
+
+
+% *** GRAPHICS RELATED PACKAGES ***
+%
+\ifCLASSINFOpdf
+\usepackage[pdftex]{graphicx}
+ % declare the path(s) where your graphic files are
+\graphicspath{{/home/abuiles/jpeg/}}
+ % and their extensions so you won't have to specify these with
+ % every instance of \includegraphics
+\DeclareGraphicsExtensions{.pdf,.jpeg,.jpg,.png}
+\else
+ % or other class option (dvipsone, dvipdf, if not using dvips). graphicx
+ % will default to the driver specified in the system graphics.cfg if no
+ % driver is specified.
+ % \usepackage[dvips]{graphicx}
+ % declare the path(s) where your graphic files are
+ % \graphicspath{{../eps/}}
+ % and their extensions so you won't have to specify these with
+ % every instance of \includegraphics
+ % \DeclareGraphicsExtensions{.eps}
+\fi
+% graphicx was written by David Carlisle and Sebastian Rahtz. It is
+% required if you want graphics, photos, etc. graphicx.sty is already
+% installed on most LaTeX systems. The latest version and documentation can
+% be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/required/graphics/
+% Another good source of documentation is "Using Imported Graphics in
+% LaTeX2e" by Keith Reckdahl which can be found as epslatex.ps or
+% epslatex.pdf at: http://www.ctan.org/tex-archive/info/
+%
+% latex, and pdflatex in dvi mode, support graphics in encapsulated
+% postscript (.eps) format. pdflatex in pdf mode supports graphics
+% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure
+% that all non-photo figures use a vector format (.eps, .pdf, .mps) and
+% not a bitmapped formats (.jpeg, .png). IEEE frowns on bitmapped formats
+% which can result in "jaggedy"/blurry rendering of lines and letters as
+% well as large increases in file sizes.
+%
+% You can find documentation about the pdfTeX application at:
+% http://www.tug.org/applications/pdftex
+
+
+
+
+
+% *** MATH PACKAGES ***
+%
+%\usepackage[cmex10]{amsmath}
+% A popular package from the American Mathematical Society that provides
+% many useful and powerful commands for dealing with mathematics. If using
+% it, be sure to load this package with the cmex10 option to ensure that
+% only type 1 fonts will utilized at all point sizes. Without this option,
+% it is possible that some math symbols, particularly those within
+% footnotes, will be rendered in bitmap form which will result in a
+% document that can not be IEEE Xplore compliant!
+%
+% Also, note that the amsmath package sets \interdisplaylinepenalty to 10000
+% thus preventing page breaks from occurring within multiline equations. Use:
+%\interdisplaylinepenalty=2500
+% after loading amsmath to restore such page breaks as IEEEtran.cls normally
+% does. amsmath.sty is already installed on most LaTeX systems. The latest
+% version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/
+
+
+
+
+
+% *** SPECIALIZED LIST PACKAGES ***
+%
+%\usepackage{algorithmic}
+% algorithmic.sty was written by Peter Williams and Rogerio Brito.
+% This package provides an algorithmic environment fo describing algorithms.
+% You can use the algorithmic environment in-text or within a figure
+% environment to provide for a floating algorithm. Do NOT use the algorithm
+% floating environment provided by algorithm.sty (by the same authors) or
+% algorithm2e.sty (by Christophe Fiorio) as IEEE does not use dedicated
+% algorithm float types and packages that provide these will not provide
+% correct IEEE style captions. The latest version and documentation of
+% algorithmic.sty can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithms/
+% There is also a support site at:
+% http://algorithms.berlios.de/index.html
+% Also of interest may be the (relatively newer and more customizable)
+% algorithmicx.sty package by Szasz Janos:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithmicx/
+
+
+
+
+% *** ALIGNMENT PACKAGES ***
+%
+%\usepackage{array}
+% Frank Mittelbach's and David Carlisle's array.sty patches and improves
+% the standard LaTeX2e array and tabular environments to provide better
+% appearance and additional user controls. As the default LaTeX2e table
+% generation code is lacking to the point of almost being broken with
+% respect to the quality of the end results, all users are strongly
+% advised to use an enhanced (at the very least that provided by array.sty)
+% set of table tools. array.sty is already installed on most systems. The
+% latest version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/required/tools/
+
+
+%\usepackage{mdwmath}
+%\usepackage{mdwtab}
+% Also highly recommended is Mark Wooding's extremely powerful MDW tools,
+% especially mdwmath.sty and mdwtab.sty which are used to format equations
+% and tables, respectively. The MDWtools set is already installed on most
+% LaTeX systems. The lastest version and documentation is available at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/mdwtools/
+
+
+% IEEEtran contains the IEEEeqnarray family of commands that can be used to
+% generate multiline equations as well as matrices, tables, etc., of high
+% quality.
+
+
+%\usepackage{eqparbox}
+% Also of notable interest is Scott Pakin's eqparbox package for creating
+% (automatically sized) equal width boxes - aka "natural width parboxes".
+% Available at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/eqparbox/
+
+\pagestyle{fancy} %
+\lhead{\includegraphics[width=1in]{logoeafit}} %
+\chead{Informe 3} %
+\rhead{\firstxmark} %
+\lfoot{\lastxmark} %
+%\cfoot{} %
+\rfoot{Page\ \thepage\ of\ \pageref{LastPage}} %
+%% \renewcommand\headrulewidth{0.4pt} %
+%% \renewcommand\footrulewidth{0.4pt}
+
+
+
+
+% *** SUBFIGURE PACKAGES ***
+%\usepackage[tight,footnotesize]{subfigure}
+% subfigure.sty was written by Steven Douglas Cochran. This package makes it
+% easy to put subfigures in your figures. e.g., "Figure 1a and 1b". For IEEE
+% work, it is a good idea to load it with the tight package option to reduce
+% the amount of white space around the subfigures. subfigure.sty is already
+% installed on most LaTeX systems. The latest version and documentation can
+% be obtained at:
+% http://www.ctan.org/tex-archive/obsolete/macros/latex/contrib/subfigure/
+% subfigure.sty has been superceeded by subfig.sty.
+
+
+
+%\usepackage[caption=false]{caption}
+%\usepackage[font=footnotesize]{subfig}
+% subfig.sty, also written by Steven Douglas Cochran, is the modern
+% replacement for subfigure.sty. However, subfig.sty requires and
+% automatically loads Axel Sommerfeldt's caption.sty which will override
+% IEEEtran.cls handling of captions and this will result in nonIEEE style
+% figure/table captions. To prevent this problem, be sure and preload
+% caption.sty with its "caption=false" package option. This is will preserve
+% IEEEtran.cls handing of captions. Version 1.3 (2005/06/28) and later
+% (recommended due to many improvements over 1.2) of subfig.sty supports
+% the caption=false option directly:
+%\usepackage[caption=false,font=footnotesize]{subfig}
+%
+% The latest version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/subfig/
+% The latest version and documentation of caption.sty can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/caption/
+
+
+
+
+% *** FLOAT PACKAGES ***
+%
+%\usepackage{fixltx2e}
+% fixltx2e, the successor to the earlier fix2col.sty, was written by
+% Frank Mittelbach and David Carlisle. This package corrects a few problems
+% in the LaTeX2e kernel, the most notable of which is that in current
+% LaTeX2e releases, the ordering of single and double column floats is not
+% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a
+% single column figure to be placed prior to an earlier double column
+% figure. The latest version and documentation can be found at:
+% http://www.ctan.org/tex-archive/macros/latex/base/
+
+
+
+%\usepackage{stfloats}
+% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e
+% the ability to do double column floats at the bottom of the page as well
+% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in
+% LaTeX2e). It also provides a command:
+%\fnbelowfloat
+% to enable the placement of footnotes below bottom floats (the standard
+% LaTeX2e kernel puts them above bottom floats). This is an invasive package
+% which rewrites many portions of the LaTeX2e float routines. It may not work
+% with other packages that modify the LaTeX2e float routines. The latest
+% version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/sttools/
+% Documentation is contained in the stfloats.sty comments as well as in the
+% presfull.pdf file. Do not use the stfloats baselinefloat ability as IEEE
+% does not allow \baselineskip to stretch. Authors submitting work to the
+% IEEE should note that IEEE rarely uses double column equations and
+% that authors should try to avoid such use. Do not be tempted to use the
+% cuted.sty or midfloat.sty packages (also by Sigitas Tolusis) as IEEE does
+% not format its papers in such ways.
+
+
+
+
+
+% *** PDF, URL AND HYPERLINK PACKAGES ***
+%
+\usepackage{url}
+% url.sty was written by Donald Arseneau. It provides better support for
+% handling and breaking URLs. url.sty is already installed on most LaTeX
+% systems. The latest version can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/misc/
+% Read the url.sty source comments for usage information. Basically,
+% \url{my_url_here}.
+
+
+
+
+
+% *** Do not adjust lengths that control margins, column widths, etc. ***
+% *** Do not use packages that alter fonts (such as pslatex). ***
+% There should be no need to do such things with IEEEtran.cls V1.6 and later.
+% (Unless specifically asked to do so by the journal or conference you plan
+% to submit to, of course. )
+
+
+% correct bad hyphenation here
+\hyphenation{op-tical net-works semi-conduc-tor}
+
+
+\begin{document}
+%
+% paper title
+% can use linebreaks \\ within to get better formatting as desired
+\title{Práctica 1 Avance 3}
+
+
+% author names and affiliations
+% use a multiple column layout for up to three different
+% affiliations
+\author{\IEEEauthorblockN{Alejandro Cavadavid}
+\IEEEauthorblockA{Universidad EAFIT\\
+Medell\'in, Colombia\\
+Email: acadavid@eafit.edu.co}
+\and
+\IEEEauthorblockN{Adolfo Builes}
+\IEEEauthorblockA{Universidad EAFIT\\
+Medell\'in, Colombia\\
+Email: abuilesj@eafit.edu.co}
+\and
+\IEEEauthorblockN{Sebastian Castillo}
+\IEEEauthorblockA{Universidad EAFIT\\
+Medell\'in, Colombia\\
+Email: scatil1@eafit.edu.co}}
+
+% conference papers do not typically use \thanks and this command
+% is locked out in conference mode. If really needed, such as for
+% the acknowledgment of grants, issue a \IEEEoverridecommandlockouts
+% after \documentclass
+
+% for over three affiliations, or if they all won't fit within the width
+% of the page, use this alternative format:
+%
+%\author{\IEEEauthorblockN{Michael Shell\IEEEauthorrefmark{1},
+%Homer Simpson\IEEEauthorrefmark{2},
+%James Kirk\IEEEauthorrefmark{3},
+%Montgomery Scott\IEEEauthorrefmark{3} and
+%Eldon Tyrell\IEEEauthorrefmark{4}}
+%\IEEEauthorblockA{\IEEEauthorrefmark{1}School of Electrical and Computer Engineering\\
+%Georgia Institute of Technology,
+%Atlanta, Georgia 30332--0250\\ Email: see http://www.michaelshell.org/contact.html}
+%\IEEEauthorblockA{\IEEEauthorrefmark{2}Twentieth Century Fox, Springfield, USA\\
+%Email: homer@thesimpsons.com}
+%\IEEEauthorblockA{\IEEEauthorrefmark{3}Starfleet Academy, San Francisco, California 96678-2391\\
+%Telephone: (800) 555--1212, Fax: (888) 555--1212}
+%\IEEEauthorblockA{\IEEEauthorrefmark{4}Tyrell Inc., 123 Replicant Street, Los Angeles, California 90210--4321}}
+
+
+
+
+% use for special paper notices
+%\IEEEspecialpapernotice{(Invited Paper)}
+
+
+
+
+% make the title area
+\maketitle
+
+
+\begin{abstract}
+%\boldmath
+En este tercer avance hicimos una refinaci\'on de cada uno de los problemas a
+resolver
+\end{abstract}
+% IEEEtran.cls defaults to using nonbold math in the Abstract.
+% This preserves the distinction between vectors and scalars. However,
+% if the conference you are submitting to favors bold math in the abstract,
+% then you can use LaTeX's standard command \boldmath at the very start
+% of the abstract to achieve this. Many IEEE journals/conferences frown on
+% math in the abstract anyway.
+
+% no keywords
+
+
+
+
+% For peer review papers, you can put extra information on the cover
+% page as needed:
+% \ifCLASSOPTIONpeerreview
+% \begin{center} \bfseries EDICS Category: 3-BBND \end{center}
+% \fi
+%
+% For peerreview papers, this IEEEtran command inserts a page break and
+% creates the second title. It will be ignored for other modes.
+\thispagestyle{fancy}
+\IEEEpeerreviewmaketitle
+
+
+
+\section{Refinando los algoritmos}
+% no \IEEEPARstart
+Se realiza una refinaci\'on detallada de cada uno de los algoritmos, haciendo a un
+nivel 3 de refinamiento
+% You must have at least 2 lines in the paragraph with the drop letter
+% (should never be an issue)
+
+%\hfill mds
+
+%\hfill January 11, 2007
+
+\subsection{Refinando la suma de matrices}
+Se muestra una refinaci\'on para el problema de sumas dos matrices
+
+
+\subsubsection{Vista general}
+Aqu\'i se muestra una vista muy general de como funciona el algoritmo para sumar las
+matrices.
+\begin{figure}[!h]
+\centering
+\includegraphics[width=2.5in]{sumaParte1}
+\caption{Suma de matrices}
+\label{fig_sim}
+\end{figure}
+\subsubsection{Vista en profundidad 1}
+Se navega en un nivel de profundidad y se hace la distinci\'on entre la parte donde
+se leen los datos y en donde se recorren las matrices.
+\begin{figure}[h]
+\centering
+\includegraphics[width=2in]{suma2}
+\caption{Suma de matrices}
+\label{fig_sim}
+\end{figure}
+
+\subsubsection{Vista en profundidad 2}
+Se navega en un nivel de profundidad 2, donde se muestra a m\'as detalle el proceso de
+leer los valores iniciales y la parte de recorrer las dos matrices realizando su suma.
+\begin{figure}[h]
+\centering
+\includegraphics[width=2in]{suma3}
+\caption{Suma de matrices}
+\label{fig_sim}
+\end{figure}
+
+\subsection{Refinando la resta de matrices}
+Se muestra una refinaci\'on para el problema de resta de dos matrices
+
+
+\subsubsection{Vista general}
+Al igual que en la suma, se muestra una vista muy general de como funciona el
+algoritmo para sumar las matrices.
+\begin{figure}[!h]
+\centering
+\includegraphics[width=2.5in]{resta1}
+\caption{Resta de matrices}
+\label{fig_sim}
+\end{figure}
+\subsubsection{Vista en profundidad 1}
+Se navega en un nivel de profundidad y se hace la distinci\'on entre la parte donde
+se leen los datos y en donde se recorren las matrices.
+\newpage
+\begin{figure}[h]
+\centering
+\vspace{0.2in}
+\includegraphics[width=2in]{resta2}
+\caption{Resta de matrices}
+\label{fig_sim}
+\end{figure}
+
+\subsubsection{Vista en profundidad 2}
+Se navega en un nivel de profundidad 2, donde se muestra a m\'as detalle el proceso de
+leer los valores iniciales y la parte de recorrer las dos matrices realizando su resta.
+\begin{figure}[h]
+\centering
+\includegraphics[width=2in]{resta3}
+\caption{Resta de matrices}
+\label{fig_sim}
+\end{figure}
+
+\subsection{Multiplaci\'on de matriz por un escalar}
+Refinaci\'on para la multiplicaci\'on de una matriz por un escalar.
+\subsubsection{Vista general}
+Idea general de como se realiza la multiplicaci\'on de una matriz por un escalar.
+\begin{figure}[!h]
+\centering
+\includegraphics[width=3in]{escalar1}
+\caption{Matriz por escalar}
+\label{fig_sim}
+\end{figure}
+\subsubsection{Vista en profundidad 1}
+Al igual que en los otros ejemplos se hace una separaci\'on entre la entrada de datos
+y el recorrido de la matriz.
+\begin{figure}[h]
+\centering
+\includegraphics[width=2in]{escalar2}
+\caption{Matriz por escalar}
+\label{fig_sim}
+\end{figure}
+
+\subsubsection{Vista en profundidad 2}
+Se navega en un nivel de profundidad 3, donde se muestra detalladamente el proces de
+multiplicar una matriz por un escalar.
+\begin{figure}[h]
+\centering
+\includegraphics[width=2in]{escalar3}
+\caption{Matriz por escalar}
+\label{fig_sim}
+\end{figure}
+
+\subsection{Multiplaci\'on de matrices}
+Refinaci\'on para la multiplicaci\'on entre matrices.
+\subsubsection{Vista general}
+Idea general de como se realiza la multiplicaci\'on de dos matrices A y B.
+\newpage
+\begin{figure}[!h]
+\centering
+\includegraphics[width=3in]{multi1}
+\caption{Multiplicaci\'on de matrices}
+\label{fig_sim}
+\end{figure}
+\subsubsection{Vista en profundidad 1}
+Separaci\'on entre la entrada de datos y el recorrido para hacer la respectiva multiplicaci\'on.
+\begin{figure}[h]
+\centering
+\includegraphics[width=2in]{multi2}
+\caption{Multiplicaci\'on de matrices}
+\label{fig_sim}
+\end{figure}
+
+\subsubsection{Vista en profundidad 2}
+Mostramos detalladamente el proceso de
+multiplicar una matriz por otra.
+\begin{figure}[h]
+\centering
+\includegraphics[width=3in]{multi3}
+\caption{Multiplicaci\'on de matrices}
+\label{fig_sim}
+\end{figure}
+\newpage
+% An example of a floating figure using the graphicx package.
+% Note that \label must occur AFTER (or within) \caption.
+% For figures, \caption should occur after the \includegraphics.
+% Note that IEEEtran v1.7 and later has special internal code that
+% is designed to preserve the operation of \label within \caption
+% even when the captionsoff option is in effect. However, because
+% of issues like this, it may be the safest practice to put all your
+% \label just after \caption rather than within \caption{}.
+%
+% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class
+% option should be used if it is desired that the figures are to be
+% displayed while in draft mode.
+%
+%\begin{figure}[!t]
+%\centering
+%\includegraphics[width=2.5in]{myfigure}
+% where an .eps filename suffix will be assumed under latex,
+% and a .pdf suffix will be assumed for pdflatex; or what has been declared
+% via \DeclareGraphicsExtensions.
+%\caption{Simulation Results}
+%\label{fig_sim}
+%\end{figure}
+
+% Note that IEEE typically puts floats only at the top, even when this
+% results in a large percentage of a column being occupied by floats.
+
+
+% An example of a double column floating figure using two subfigures.
+% (The subfig.sty package must be loaded for this to work.)
+% The subfigure \label commands are set within each subfloat command, the
+% \label for the overall figure must come after \caption.
+% \hfil must be used as a separator to get equal spacing.
+% The subfigure.sty package works much the same way, except \subfigure is
+% used instead of \subfloat.
+%
+%\begin{figure*}[!t]
+%\centerline{\subfloat[Case I]\includegraphics[width=2.5in]{subfigcase1}%
+%\label{fig_first_case}}
+%\hfil
+%\subfloat[Case II]{\includegraphics[width=2.5in]{subfigcase2}%
+%\label{fig_second_case}}}
+%\caption{Simulation results}
+%\label{fig_sim}
+%\end{figure*}
+%
+% Note that often IEEE papers with subfigures do not employ subfigure
+% captions (using the optional argument to \subfloat), but instead will
+% reference/describe all of them (a), (b), etc., within the main caption.
+
+
+% An example of a floating table. Note that, for IEEE style tables, the
+% \caption command should come BEFORE the table. Table text will default to
+% \footnotesize as IEEE normally uses this smaller font for tables.
+% The \label must come after \caption as always.
+%
+%\begin{table}[!t]
+%% increase table row spacing, adjust to taste
+%\renewcommand{\arraystretch}{1.3}
+% if using array.sty, it might be a good idea to tweak the value of
+% \extrarowheight as needed to properly center the text within the cells
+%\caption{An Example of a Table}
+%\label{table_example}
+%\centering
+%% Some packages, such as MDW tools, offer better commands for making tables
+%% than the plain LaTeX2e tabular which is used here.
+%\begin{tabular}{|c||c|}
+%\hline
+%One & Two\\
+%\hline
+%Three & Four\\
+%\hline
+%\end{tabular}
+%\end{table}
+
+
+% Note that IEEE does not put floats in the very first column - or typically
+% anywhere on the first page for that matter. Also, in-text middle ("here")
+% positioning is not used. Most IEEE journals/conferences use top floats
+% exclusively. Note that, LaTeX2e, unlike IEEE journals/conferences, places
+% footnotes above bottom floats. This can be corrected via the \fnbelowfloat
+% command of the stfloats package.
+
+\section {Promedio de un vector de 10 posiciones}
+En nuestro proceso de familiarización con assembler, esta semana implementamos un
+algoritmo para determinar el promedio de la suma de un vector de 10 posiciones.
+Dado que las matrices se pueden representar como vectores dentro de vectores, realizamos una pequeña implementaci\'on en clase para realizar el c\'alculo de promedios de una serie de datos dados. Con ello comprendimos en principio como operamos con estos vectores, es decir, que de acuerdo al tamaño de los datos que escogimos, nos debemos mover dentro del vector variando con este tamaño para pasar a las posiciones siguientes del mismo. El nombre del vector apunta al byte 0 de la estructura.
+\subsection {Programa en Assembly}
+segment .data\\
+notas: dd 1,2,3,4,5,6,7,8,9,10\\
+total: dd 0\\
+segment .bss\\
+\\
+segment .text\\
+ global main\\
+\\
+main:\\
+ mov ebx,notas\\
+ mov eax,0\\
+ mov edx,0\\
+ mov ecx,3\\
+ jmp fstloop\\
+fstloop:\\
+ add eax,[ebx]\\
+ add ebx,4\\
+ loop fstloop\\
+ mov ecx, 5\\
+ div ecx\\
+ add [total], eax\\
+ mov edx,0\\
+ mov eax,0\\
+ mov ecx,3\\
+sndloop:\\
+ add eax,[ebx]\\
+ add ebx,4\\
+ loop sndloop\\
+ mov ecx, 6\\
+ mul ecx\\
+ mov ecx, 10\\
+ div ecx\\
+ add [total], eax\\
+ mov edx,0\\
+ mov eax,0\\
+ mov ecx,4\\
+thdloop:\\
+ add eax,[ebx]\\
+ add ebx,4\\
+ loop thdloop\\
+ mov ecx, 5\\
+ div ecx\\
+ add [total], eax\\
+ mov edx, 0\\
+ mov ecx,3\\
+fin:\\
+ mov eax,1\\
+ mov ebx,0\\
+ int 0x80
+
+\section{Conclusiones}
+Realizar el proceso de refinaci\'on para cualquier problema claramente ayuda en el
+entendimiento de este, permite a las personas tener una mejor idea de como es su
+funcionamiento, y adem\'as en el momento de llevarlo a codigo ensamblador brinda una
+mejor idea de como debe ser estructurado el programa.
+
+
+% conference papers do not normally have an appendix
+
+
+% use section* for acknowledgementn
+
+% trigger a \newpage just before the given reference
+% number - used to balance the columns on the last page
+% adjust value as needed - may need to be readjusted if
+% the document is modified later
+%\IEEEtriggeratref{8}
+% The "triggered" command can be changed if desired:
+%\IEEEtriggercmd{\enlargethispage{-5in}}
+
+% references section
+
+% can use a bibliography generated by BibTeX as a .bbl file
+% BibTeX documentation can be easily obtained at:
+% http://www.ctan.org/tex-archive/biblio/bibtex/contrib/doc/
+% The IEEEtran BibTeX style support page is at:
+% http://www.michaelshell.org/tex/ieeetran/bibtex/
+%\bibliographystyle{IEEEtran}
+% argument is your BibTeX string definitions and bibliography database(s)
+%\bibliography{IEEEabrv,../bib/paper}
+%
+% <OR> manually copy in the resultant .bbl file
+% set second argument of \begin to the number of references
+% (used to reserve space for the reference number labels box)
+%\begin{thebibliography}{1}
+\section{Bibliograf\'ia}
+%\bibitem{wikipedia.org}
+[1] \url{http://es.wikipedia.org/wiki/Matriz_(matemática)}, Visitado Viernes 12 de Marzo.
+
+%\end{thebibliography}
+
+
+
+
+% that's all folks
+\end{document}
+
+
BIN  entrega3/sumaMatrices.dia
Binary file not shown
4,702 entrega4/IEEEtran.cls
4,702 additions, 0 deletions not shown
1  entrega4/clean
@@ -0,0 +1 @@
+rm *.out *.log *.o *.aux
25 entrega4/entrega4.aux
@@ -0,0 +1,25 @@
+\relax
+\@writefile{toc}{\contentsline {section}{\numberline {I}Suma de matrices}{1}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {I-A}}De la refinaci\'on al c\'odigo}{1}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {I-B}}Implementaci\'on}{1}}
+\@writefile{lof}{\contentsline {figure}{\numberline {1}{\ignorespaces Diagrama de flujo para la suma de matrices}}{1}}
+\newlabel{fig_sim}{{1}{1}}
+\@writefile{toc}{\contentsline {section}{\numberline {II}Resta de matrices}{2}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {II-A}}Implementaci\'on}{2}}
+\@writefile{lof}{\contentsline {figure}{\numberline {2}{\ignorespaces Diagrama de flujo para la resta de matrices}}{2}}
+\newlabel{fig_sim}{{2}{2}}
+\@writefile{toc}{\contentsline {section}{\numberline {III}Multiplicaci\'on de Matriz por escalar}{2}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {III-A}}Implementaci\'on}{2}}
+\@writefile{lof}{\contentsline {figure}{\numberline {3}{\ignorespaces Diagrama de flujo para la multiplicacion de matriz por escalar}}{3}}
+\newlabel{fig_sim}{{3}{3}}
+\@writefile{toc}{\contentsline {section}{\numberline {IV}Matriz transpuesta}{3}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {IV-A}}Diagramas de flujo}{3}}
+\@writefile{lof}{\contentsline {figure}{\numberline {4}{\ignorespaces Diagrama de flujo a nivel general}}{3}}
+\newlabel{fig_sim}{{4}{3}}
+\@writefile{lof}{\contentsline {figure}{\numberline {5}{\ignorespaces Diagrama de flujo a nivel 1}}{3}}
+\newlabel{fig_sim}{{5}{3}}
+\@writefile{lof}{\contentsline {figure}{\numberline {6}{\ignorespaces Diagrama de flujo a nivel 2}}{4}}
+\newlabel{fig_sim}{{6}{4}}
+\@writefile{toc}{\contentsline {section}{\numberline {V}Conclusiones}{4}}
+\@writefile{toc}{\contentsline {section}{\numberline {VI}Bibliograf\'ia}{4}}
+\newlabel{LastPage}{{}{4}}
442 entrega4/entrega4.log
@@ -0,0 +1,442 @@
+This is pdfTeXk, Version 3.141592-1.40.3 (Web2C 7.5.6) (format=pdflatex 2010.3.12) 19 MAR 2010 19:43
+entering extended mode
+ %&-line parsing enabled.
+**entrega4.tex
+(./entrega4.tex
+LaTeX2e <2005/12/01>
+Babel <v3.8h> and hyphenation patterns for english, usenglishmax, dumylang, noh
+yphenation, loaded.
+(./IEEEtran.cls
+Document Class: IEEEtran 2007/03/05 V1.7a by Michael Shell
+-- See the "IEEEtran_HOWTO" manual for usage information.
+-- http://www.michaelshell.org/tex/ieeetran/
+\@IEEEtrantmpdimenA=\dimen102
+\@IEEEtrantmpdimenB=\dimen103
+\@IEEEtrantmpcountA=\count79
+\@IEEEtrantmpcountB=\count80
+\@IEEEtrantmptoksA=\toks14
+LaTeX Font Info: Try loading font information for OT1+ptm on input line 366.
+
+(/usr/share/texmf-texlive/tex/latex/psnfss/ot1ptm.fd
+File: ot1ptm.fd 2001/06/04 font definitions for OT1/ptm.
+)
+-- Using 8.5in x 11in (letter) paper.
+-- Using PDF output.
+\@IEEEnormalsizeunitybaselineskip=\dimen104
+-- This is a 10 point document.
+\CLASSINFOnormalsizebaselineskip=\dimen105
+\CLASSINFOnormalsizeunitybaselineskip=\dimen106
+\IEEEnormaljot=\dimen107
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <5> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <5> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <7> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <7> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <8> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <8> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <9> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <9> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <10> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <10> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <11> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <11> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <12> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <12> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <17> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <17> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <20> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <20> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <24> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <24> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+\IEEEilabelindentA=\dimen108
+\IEEEilabelindentB=\dimen109
+\IEEEilabelindent=\dimen110
+\IEEEelabelindent=\dimen111
+\IEEEdlabelindent=\dimen112
+\IEEElabelindent=\dimen113
+\IEEEiednormlabelsep=\dimen114
+\IEEEiedmathlabelsep=\dimen115
+\IEEEiedtopsep=\skip41
+\c@section=\count81
+\c@subsection=\count82
+\c@subsubsection=\count83
+\c@paragraph=\count84
+\c@IEEEsubequation=\count85
+\abovecaptionskip=\skip42
+\belowcaptionskip=\skip43
+\c@figure=\count86
+\c@table=\count87
+\@IEEEeqnnumcols=\count88
+\@IEEEeqncolcnt=\count89
+\@IEEEtmpitemindent=\dimen116
+\c@IEEEbiography=\count90
+\@IEEEtranrubishbin=\box26
+) (/usr/share/texmf-texlive/tex/latex/fancyhdr/fancyhdr.sty
+\fancy@headwidth=\skip44
+\f@ncyO@elh=\skip45
+\f@ncyO@erh=\skip46
+\f@ncyO@olh=\skip47
+\f@ncyO@orh=\skip48
+\f@ncyO@elf=\skip49
+\f@ncyO@erf=\skip50
+\f@ncyO@olf=\skip51
+\f@ncyO@orf=\skip52
+)
+(/usr/share/texmf-texlive/tex/latex/amsmath/amsmath.sty
+Package: amsmath 2000/07/18 v2.13 AMS math features
+\@mathmargin=\skip53
+
+For additional information on amsmath, use the `?' option.
+(/usr/share/texmf-texlive/tex/latex/amsmath/amstext.sty
+Package: amstext 2000/06/29 v2.01
+
+(/usr/share/texmf-texlive/tex/latex/amsmath/amsgen.sty
+File: amsgen.sty 1999/11/30 v2.0
+\@emptytoks=\toks15
+\ex@=\dimen117
+))
+(/usr/share/texmf-texlive/tex/latex/amsmath/amsbsy.sty
+Package: amsbsy 1999/11/29 v1.2d
+\pmbraise@=\dimen118
+)
+(/usr/share/texmf-texlive/tex/latex/amsmath/amsopn.sty
+Package: amsopn 1999/12/14 v2.01 operator names
+)
+\inf@bad=\count91
+LaTeX Info: Redefining \frac on input line 211.
+\uproot@=\count92
+\leftroot@=\count93
+LaTeX Info: Redefining \overline on input line 307.
+\classnum@=\count94
+\DOTSCASE@=\count95
+LaTeX Info: Redefining \ldots on input line 379.
+LaTeX Info: Redefining \dots on input line 382.
+LaTeX Info: Redefining \cdots on input line 467.
+\Mathstrutbox@=\box27
+\strutbox@=\box28
+\big@size=\dimen119
+LaTeX Font Info: Redeclaring font encoding OML on input line 567.
+LaTeX Font Info: Redeclaring font encoding OMS on input line 568.
+\macc@depth=\count96
+\c@MaxMatrixCols=\count97
+\dotsspace@=\muskip10
+\c@parentequation=\count98
+\dspbrk@lvl=\count99
+\tag@help=\toks16
+\row@=\count100
+\column@=\count101
+\maxfields@=\count102
+\andhelp@=\toks17
+\eqnshift@=\dimen120
+\alignsep@=\dimen121
+\tagshift@=\dimen122
+\tagwidth@=\dimen123
+\totwidth@=\dimen124
+\lineht@=\dimen125
+\@envbody=\toks18
+\multlinegap=\skip54
+\multlinetaggap=\skip55
+\mathdisplay@stack=\toks19
+LaTeX Info: Redefining \[ on input line 2666.
+LaTeX Info: Redefining \] on input line 2667.
+)
+(/usr/share/texmf-texlive/tex/latex/amsfonts/amsfonts.sty
+Package: amsfonts 2001/10/25 v2.2f
+\symAMSa=\mathgroup4
+\symAMSb=\mathgroup5
+LaTeX Font Info: Overwriting math alphabet `\mathfrak' in version `bold'
+(Font) U/euf/m/n --> U/euf/b/n on input line 132.
+)
+(/usr/share/texmf-texlive/tex/latex/amscls/amsthm.sty
+Package: amsthm 2004/08/06 v2.20
+\thm@style=\toks20
+\thm@bodyfont=\toks21
+\thm@headfont=\toks22
+\thm@notefont=\toks23
+\thm@headpunct=\toks24
+\thm@preskip=\skip56
+\thm@postskip=\skip57
+\thm@headsep=\skip58
+\dth@everypar=\toks25
+)
+(/usr/share/texmf-texlive/tex/latex/amsfonts/amssymb.sty
+Package: amssymb 2002/01/22 v2.2d
+)
+(/usr/share/texmf-texlive/tex/latex/setspace/setspace.sty
+Package: setspace 2000/12/01 6.7 Contributed and Supported LaTeX2e package
+
+Package: `setspace' 6.7 <2000/12/01>
+) (/usr/share/texmf-texlive/tex/latex/Tabbing/Tabbing.sty
+Package: Tabbing 1997/12/18 v1.0 Tabbing environment (JPFD)
+)
+(/usr/share/texmf/tex/latex/dblatex/misc/lastpage.sty
+Package: lastpage 1994/06/25 v0.1b LaTeX2e package for refs to last page number
+ (JPG)
+)
+(/usr/share/texmf-texlive/tex/latex/fancyhdr/extramarks.sty
+\@temptokenb=\toks26
+)
+(/usr/share/texmf-texlive/tex/latex/ltxmisc/chngpage.sty
+Package: chngpage 2003/08/10 v1.2 change page layout
+\c@cp@cnt=\count103
+\c@cp@tempcnt=\count104
+)
+(/usr/share/texmf-texlive/tex/latex/soul/soul.sty
+Package: soul 2003/11/17 v2.4 letterspacing/underlining (mf)
+\SOUL@word=\toks27
+\SOUL@lasttoken=\toks28
+\SOUL@cmds=\toks29
+\SOUL@buffer=\toks30
+\SOUL@token=\toks31
+\SOUL@spaceskip=\skip59
+\SOUL@ttwidth=\dimen126
+\SOUL@uldp=\dimen127
+\SOUL@ulht=\dimen128
+)
+(/usr/share/texmf-texlive/tex/latex/graphics/color.sty
+Package: color 2005/11/14 v1.0j Standard LaTeX Color (DPC)
+
+(/etc/texmf/tex/latex/config/color.cfg
+File: color.cfg 2007/01/18 v1.5 color configuration of teTeX/TeXLive
+)
+Package color Info: Driver file: pdftex.def on input line 130.
+
+(/usr/share/texmf-texlive/tex/latex/pdftex-def/pdftex.def
+File: pdftex.def 2007/01/08 v0.04d Graphics/color for pdfTeX
+\Gread@gobject=\count105
+))
+(/usr/share/texmf-texlive/tex/latex/listings/listings.sty
+(/usr/share/texmf-texlive/tex/latex/graphics/keyval.sty
+Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
+\KV@toks@=\toks32
+)
+\lst@mode=\count106
+\lst@gtempboxa=\box29
+\lst@token=\toks33
+\lst@length=\count107
+\lst@currlwidth=\dimen129
+\lst@column=\count108
+\lst@pos=\count109
+\lst@lostspace=\dimen130
+\lst@width=\dimen131
+\lst@newlines=\count110
+\lst@lineno=\count111
+\c@lstlisting=\count112
+\lst@maxwidth=\dimen132
+
+(/usr/share/texmf-texlive/tex/latex/listings/lstpatch.sty
+File: lstpatch.sty 2004/10/17 1.3b (Carsten Heinz)
+)
+(/usr/share/texmf-texlive/tex/latex/listings/lstmisc.sty
+File: lstmisc.sty 2004/09/07 1.3 (Carsten Heinz)
+\c@lstnumber=\count113
+\lst@skipnumbers=\count114
+\lst@framebox=\box30
+)
+(/usr/share/texmf-texlive/tex/latex/listings/listings.cfg
+File: listings.cfg 2004/09/05 1.3 listings configuration
+))
+Package: listings 2004/10/17 1.3b (Carsten Heinz)
+
+(/usr/share/texmf-texlive/tex/latex/graphics/graphicx.sty
+Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR)
+
+(/usr/share/texmf-texlive/tex/latex/graphics/graphics.sty
+Package: graphics 2006/02/20 v1.0o Standard LaTeX Graphics (DPC,SPQR)
+
+(/usr/share/texmf-texlive/tex/latex/graphics/trig.sty
+Package: trig 1999/03/16 v1.09 sin cos tan (DPC)
+)
+(/etc/texmf/tex/latex/config/graphics.cfg
+File: graphics.cfg 2007/01/18 v1.5 graphics configuration of teTeX/TeXLive
+)
+Package graphics Info: Driver file: pdftex.def on input line 90.
+)
+\Gin@req@height=\dimen133
+\Gin@req@width=\dimen134
+)
+(/usr/share/texmf-texlive/tex/latex/ltxmisc/url.sty
+\Urlmuskip=\muskip11
+Package: url 2005/06/27 ver 3.2 Verb mode for urls, etc.
+) (./entrega4.aux
+
+LaTeX Warning: Label `fig_sim' multiply defined.
+
+
+LaTeX Warning: Label `fig_sim' multiply defined.
+
+
+LaTeX Warning: Label `fig_sim' multiply defined.
+
+
+LaTeX Warning: Label `fig_sim' multiply defined.
+
+
+LaTeX Warning: Label `fig_sim' multiply defined.
+
+)
+\openout1 = `entrega4.aux'.
+
+LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 369.
+LaTeX Font Info: ... okay on input line 369.
+LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 369.
+LaTeX Font Info: ... okay on input line 369.
+LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 369.
+LaTeX Font Info: ... okay on input line 369.
+LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 369.
+LaTeX Font Info: ... okay on input line 369.
+LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 369.
+LaTeX Font Info: ... okay on input line 369.
+LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 369.
+LaTeX Font Info: ... okay on input line 369.
+ (/usr/share/texmf/tex/context/base/supp-pdf.tex
+[Loading MPS to PDF converter (version 2006.09.02).]
+\scratchcounter=\count115
+\scratchdimen=\dimen135
+\scratchbox=\box31
+\nofMPsegments=\count116
+\nofMParguments=\count117
+\everyMPshowfont=\toks34
+\MPscratchCnt=\count118
+\MPscratchDim=\dimen136
+\MPnumerator=\count119
+\everyMPtoPDFconversion=\toks35
+)
+Missing character: There is no � in font ptmb7t!
+Missing character: There is no � in font ptmb7t!
+Missing character: There is no � in font ptmr7t!
+Missing character: There is no � in font ptmr7t!
+ </home/abuiles/jpeg/suma3.jpeg, id=1, 714.67pt x 1023.825pt>
+File: /home/abuiles/jpeg/suma3.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/suma3.jpeg>
+Missing character: There is no � in font ptmr7t!
+Missing character: There is no � in font ptmr7t!
+
+(/usr/share/texmf-texlive/tex/latex/listings/lstlang1.sty
+File: lstlang1.sty 2004/09/05 1.3 listings language file
+)
+(/usr/share/texmf-texlive/tex/latex/listings/lstlang2.sty
+File: lstlang2.sty 2004/09/05 1.3 listings language file
+)
+(/usr/share/texmf-texlive/tex/latex/listings/lstlang3.sty
+File: lstlang3.sty 2004/09/05 1.3 listings language file
+)
+Underfull \vbox (badness 2698) has occurred while \output is active []
+
+
+</home/abuiles/jpeg/logoeafit.jpg, id=2, 200.75pt x 91.34125pt>
+File: /home/abuiles/jpeg/logoeafit.jpg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/logoeafit.jpg>
+
+Package Fancyhdr Warning: \headheight is too small (12.0pt):
+ Make it at least 36.48285pt.
+ We now make it that large for the rest of the document.
+ This may cause the page layout to be inconsistent, however.
+
+[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}
+
+
+ </home/abuiles/jpeg/logoeafit.jpg> </home/abuiles/jpeg/suma3.jpeg>]
+</home/abuiles/jpeg/resta3.jpeg, id=11, 728.7225pt x 994.71625pt>
+File: /home/abuiles/jpeg/resta3.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/resta3.jpeg>
+</home/abuiles/jpeg/escalar3.jpeg, id=12, 642.4pt x 1003.75pt>
+File: /home/abuiles/jpeg/escalar3.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/escalar3.jpeg>
+
+LaTeX Warning: `!h' float specifier changed to `!ht'.
+
+File: /home/abuiles/jpeg/logoeafit.jpg Graphic file (type jpg)
+<use /home/abuiles/jpeg/logoeafit.jpg> [2 </home/abuiles/jpeg/resta3.jpeg>]
+</home/abuiles/jpeg/trans1.jpeg, id=16, 840.13875pt x 355.3275pt>
+File: /home/abuiles/jpeg/trans1.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/trans1.jpeg>
+</home/abuiles/jpeg/trans2.jpeg, id=17, 846.16125pt x 514.92375pt>
+File: /home/abuiles/jpeg/trans2.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/trans2.jpeg>
+File: /home/abuiles/jpeg/logoeafit.jpg Graphic file (type jpg)
+ <use /home/abuiles/jpeg/logoeafit.jpg>
+[3 </home/abuiles/jpeg/escalar3.jpeg> </home/abuiles/jpeg/trans1.jpeg> </home/a
+builes/jpeg/trans2.jpeg>]
+</home/abuiles/jpeg/trans3.jpeg, id=21, 856.19875pt x 1048.91875pt>
+File: /home/abuiles/jpeg/trans3.jpeg Graphic file (type jpg)
+
+<use /home/abuiles/jpeg/trans3.jpeg>
+LaTeX Font Info: Try loading font information for U+msa on input line 824.
+
+(/usr/share/texmf-texlive/tex/latex/amsfonts/umsa.fd
+File: umsa.fd 2002/01/19 v2.2g AMS font definitions
+)
+LaTeX Font Info: Try loading font information for U+msb on input line 824.
+
+(/usr/share/texmf-texlive/tex/latex/amsfonts/umsb.fd
+File: umsb.fd 2002/01/19 v2.2g AMS font definitions
+)
+Underfull \hbox (badness 10000) in paragraph at lines 824--825
+[]\OT1/ptm/m/n/10 [1] $http : / / www . drpaulcarter . com / pcasm / pcasm-[]bo
+ok-[]pdf .
+ []
+
+
+** Conference Paper **
+Before submitting the final camera ready copy, remember to:
+
+ 1. Manually equalize the lengths of two columns on the last page
+ of your paper;
+
+ 2. Ensure that any PostScript and/or PDF output post-processing
+ uses only Type 1 fonts and that every step in the generation
+ process uses the appropriate paper size.
+
+AED: lastpage setting LastPage
+File: /home/abuiles/jpeg/logoeafit.jpg Graphic file (type jpg)
+ <use /home/abuiles/jpeg/logoeafit.jpg> [4
+
+ </home/abuiles/jpeg/trans3.jpeg>] (./entrega4.aux)
+
+LaTeX Warning: There were multiply-defined labels.
+
+ )
+Here is how much of TeX's memory you used:
+ 4811 strings out of 95086
+ 65961 string characters out of 1183255
+ 152655 words of memory out of 1500000
+ 7918 multiletter control sequences out of 10000+50000
+ 36126 words of font info for 72 fonts, out of 1200000 for 2000
+ 31 hyphenation exceptions out of 8191
+ 35i,16n,43p,313b,2114s stack positions out of 5000i,500n,6000p,200000b,5000s
+{/usr/share/texmf-texlive/fonts/enc/dvips/base/8r.enc}</usr/share/texmf-texli
+ve/fonts/type1/urw/times/utmb8a.pfb></usr/share/texmf-texlive/fonts/type1/urw/t
+imes/utmbi8a.pfb></usr/share/texmf-texlive/fonts/type1/urw/times/utmr8a.pfb></u
+sr/share/texmf-texlive/fonts/type1/urw/times/utmri8a.pfb>
+Output written on entrega4.pdf (4 pages, 447565 bytes).
+PDF statistics:
+ 39 PDF objects out of 1000 (max. 8388607)
+ 0 named destinations out of 1000 (max. 131072)
+ 36 words of extra memory for PDF output out of 10000 (max. 10000000)
+
BIN  entrega4/entrega4.pdf
Binary file not shown
834 entrega4/entrega4.tex
@@ -0,0 +1,834 @@
+
+%% bare_conf.tex
+%% V1.3
+%% 2007/01/11
+%% by Michael Shell
+%% See:
+%% http://www.michaelshell.org/
+%% for current contact information.
+%%
+%% This is a skeleton file demonstrating the use of IEEEtran.cls
+%% (requires IEEEtran.cls version 1.7 or later) with an IEEE conference paper.
+%%
+%% Support sites:
+%% http://www.michaelshell.org/tex/ieeetran/
+%% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/
+%% and
+%% http://www.ieee.org/
+
+%%*************************************************************************
+%% Legal Notice:
+%% This code is offered as-is without any warranty either expressed or
+%% implied; without even the implied warranty of MERCHANTABILITY or
+%% FITNESS FOR A PARTICULAR PURPOSE!
+%% User assumes all risk.
+%% In no event shall IEEE or any contributor to this code be liable for
+%% any damages or losses, including, but not limited to, incidental,
+%% consequential, or any other damages, resulting from the use or misuse
+%% of any information contained here.
+%%
+%% All comments are the opinions of their respective authors and are not
+%% necessarily endorsed by the IEEE.
+%%
+%% This work is distributed under the LaTeX Project Public License (LPPL)
+%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used,
+%% distributed and modified. A copy of the LPPL, version 1.3, is included
+%% in the base LaTeX documentation of all distributions of LaTeX released
+%% 2003/12/01 or later.
+%% Retain all contribution notices and credits.
+%% ** Modified files should be clearly indicated as such, including **
+%% ** renaming them and changing author support contact information. **
+%%
+%% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex,
+%% bare_conf.tex, bare_jrnl.tex, bare_jrnl_compsoc.tex
+%%*************************************************************************
+
+% *** Authors should verify (and, if needed, correct) their LaTeX system ***
+% *** with the testflow diagnostic prior to trusting their LaTeX platform ***
+% *** with production work. IEEE's font choices can trigger bugs that do ***
+% *** not appear when using other class files. ***
+% The testflow support page is at:
+% http://www.michaelshell.org/tex/testflow/
+
+
+
+% Note that the a4paper option is mainly intended so that authors in
+% countries using A4 can easily print to A4 and see how their papers will
+% look in print - the typesetting of the document will not typically be
+% affected with changes in paper size (but the bottom and side margins will).
+% Use the testflow package mentioned above to verify correct handling of
+% both paper sizes by the user's LaTeX system.
+%
+% Also note that the "draftcls" or "draftclsnofoot", not "draft", option
+% should be used if it is desired that the figures are to be displayed in
+% draft mode.
+%
+\documentclass[conference]{IEEEtran}
+% Add the compsoc option for Computer Society conferences.
+%
+% If IEEEtran.cls has not been installed into the LaTeX system files,
+% manually specify the path to it like:
+% \documentclass[conference]{../sty/IEEEtran}
+
+
+
+
+
+% Some very useful LaTeX packages include:
+% (uncomment the ones you want to load)
+
+
+% *** MISC UTILITY PACKAGES ***
+%
+%\usepackage{ifpdf}
+% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional
+% compilation based on whether the output is pdf or dvi.
+% usage:
+% \ifpdf
+% % pdf code
+% \else
+% % dvi code
+% \fi
+% The latest version of ifpdf.sty can be obtained from:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/
+% Also, note that IEEEtran.cls V1.7 and later provides a builtin
+% \ifCLASSINFOpdf conditional that works the same way.
+% When switching from latex to pdflatex and vice-versa, the compiler may
+% have to be run twice to clear warning/error messages.
+
+
+
+
+
+
+% *** CITATION PACKAGES ***
+%
+%\usepackage{cite}
+% cite.sty was written by Donald Arseneau
+% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package
+% \cite{} output to follow that of IEEE. Loading the cite package will
+% result in citation numbers being automatically sorted and properly
+% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using
+% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's
+% \cite will automatically add leading space, if needed. Use cite.sty's
+% noadjust option (cite.sty V3.8 and later) if you want to turn this off.
+% cite.sty is already installed on most LaTeX systems. Be sure and use
+% version 4.0 (2003-05-27) and later if using hyperref.sty. cite.sty does
+% not currently provide for hyperlinked citations.
+% The latest version can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/cite/
+% The documentation is contained in the cite.sty file itself.
+
+
+
+\usepackage{fancyhdr}
+\usepackage{amsmath,amsfonts,amsthm,amssymb}
+\usepackage{setspace}
+\usepackage{Tabbing}
+\usepackage{lastpage}
+\usepackage{extramarks}
+\usepackage{chngpage}
+\usepackage{soul,color}
+\usepackage{listings}
+
+
+
+% *** GRAPHICS RELATED PACKAGES ***
+%
+\ifCLASSINFOpdf
+\usepackage[pdftex]{graphicx}
+ % declare the path(s) where your graphic files are
+\graphicspath{{/home/abuiles/jpeg/}}
+ % and their extensions so you won't have to specify these with
+ % every instance of \includegraphics
+\DeclareGraphicsExtensions{.pdf,.jpeg,.jpg,.png}
+\else
+ % or other class option (dvipsone, dvipdf, if not using dvips). graphicx
+ % will default to the driver specified in the system graphics.cfg if no
+ % driver is specified.
+ % \usepackage[dvips]{graphicx}
+ % declare the path(s) where your graphic files are
+ % \graphicspath{{../eps/}}
+ % and their extensions so you won't have to specify these with
+ % every instance of \includegraphics
+ % \DeclareGraphicsExtensions{.eps}
+\fi
+% graphicx was written by David Carlisle and Sebastian Rahtz. It is
+% required if you want graphics, photos, etc. graphicx.sty is already
+% installed on most LaTeX systems. The latest version and documentation can
+% be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/required/graphics/
+% Another good source of documentation is "Using Imported Graphics in
+% LaTeX2e" by Keith Reckdahl nwhich can be found as epslatex.ps or
+% epslatex.pdf at: http://www.ctan.org/tex-archive/info/
+%
+% latex, and pdflatex in dvi mode, support graphics in encapsulated
+% postscript (.eps) format. pdflatex in pdf mode supports graphics
+% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure
+% that all non-photo figures use a vector format (.eps, .pdf, .mps) and
+% not a bitmapped formats (.jpeg, .png). IEEE frowns on bitmapped formats
+% which can result in "jaggedy"/blurry rendering of lines and letters as
+% well as large increases in file sizes.
+%
+% You can find documentation about the pdfTeX application at:
+% http://www.tug.org/applications/pdftex
+
+
+
+
+
+% *** MATH PACKAGES ***
+%
+%\usepackage[cmex10]{amsmath}
+% A popular package from the American Mathematical Society that provides
+% many useful and powerful commands for dealing with mathematics. If using
+% it, be sure to load this package with the cmex10 option to ensure that
+% only type 1 fonts will utilized at all point sizes. Without this option,
+% it is possible that some math symbols, particularly those within
+% footnotes, will be rendered in bitmap form which will result in a
+% document that can not be IEEE Xplore compliant!
+%
+% Also, note that the amsmath package sets \interdisplaylinepenalty to 10000
+% thus preventing page breaks from occurring within multiline equations. Use:
+%\interdisplaylinepenalty=2500
+% after loading amsmath to restore such page breaks as IEEEtran.cls normally
+% does. amsmath.sty is already installed on most LaTeX systems. The latest
+% version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/
+
+
+
+
+
+% *** SPECIALIZED LIST PACKAGES ***
+%
+%\usepackage{algorithmic}
+% algorithmic.sty was written by Peter Williams and Rogerio Brito.
+% This package provides an algorithmic environment fo describing algorithms.
+% You can use the algorithmic environment in-text or within a figure
+% environment to provide for a floating algorithm. Do NOT use the algorithm
+% floating environment provided by algorithm.sty (by the same authors) or
+% algorithm2e.sty (by Christophe Fiorio) as IEEE does not use dedicated
+% algorithm float types and packages that provide these will not provide
+% correct IEEE style captions. The latest version and documentation of
+% algorithmic.sty can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithms/
+% There is also a support site at:
+% http://algorithms.berlios.de/index.html
+% Also of interest may be the (relatively newer and more customizable)
+% algorithmicx.sty package by Szasz Janos:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithmicx/
+
+
+
+
+% *** ALIGNMENT PACKAGES ***
+%
+%\usepackage{array}
+% Frank Mittelbach's and David Carlisle's array.sty patches and improves
+% the standard LaTeX2e array and tabular environments to provide better
+% appearance and additional user controls. As the default LaTeX2e table
+% generation code is lacking to the point of almost being broken with
+% respect to the quality of the end results, all users are strongly
+% advised to use an enhanced (at the very least that provided by array.sty)
+% set of table tools. array.sty is already installed on most systems. The
+% latest version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/required/tools/
+
+
+%\usepackage{mdwmath}
+%\usepackage{mdwtab}
+% Also highly recommended is Mark Wooding's extremely powerful MDW tools,
+% especially mdwmath.sty and mdwtab.sty which are used to format equations
+% and tables, respectively. The MDWtools set is already installed on most
+% LaTeX systems. The lastest version and documentation is available at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/mdwtools/
+
+
+% IEEEtran contains the IEEEeqnarray family of commands that can be used to
+% generate multiline equations as well as matrices, tables, etc., of high
+% quality.
+
+
+%\usepackage{eqparbox}
+% Also of notable interest is Scott Pakin's eqparbox package for creating
+% (automatically sized) equal width boxes - aka "natural width parboxes".
+% Available at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/eqparbox/
+
+\pagestyle{fancy} %
+\lhead{\includegraphics[width=1in]{logoeafit}} %
+\chead{Informe 3} %
+\rhead{\firstxmark} %
+\lfoot{\lastxmark} %
+%\cfoot{} %
+\rfoot{Page\ \thepage\ of\ \pageref{LastPage}} %
+%% \renewcommand\headrulewidth{0.4pt} %
+%% \renewcommand\footrulewidth{0.4pt}
+
+
+
+
+% *** SUBFIGURE PACKAGES ***
+%\usepackage[tight,footnotesize]{subfigure}
+% subfigure.sty was written by Steven Douglas Cochran. This package makes it
+% easy to put subfigures in your figures. e.g., "Figure 1a and 1b". For IEEE
+% work, it is a good idea to load it with the tight package option to reduce
+% the amount of white space around the subfigures. subfigure.sty is already
+% installed on most LaTeX systems. The latest version and documentation can
+% be obtained at:
+% http://www.ctan.org/tex-archive/obsolete/macros/latex/contrib/subfigure/
+% subfigure.sty has been superceeded by subfig.sty.
+
+
+
+%\usepackage[caption=false]{caption}
+%\usepackage[font=footnotesize]{subfig}
+% subfig.sty, also written by Steven Douglas Cochran, is the modern
+% replacement for subfigure.sty. However, subfig.sty requires and
+% automatically loads Axel Sommerfeldt's caption.sty which will override
+% IEEEtran.cls handling of captions and this will result in nonIEEE style
+% figure/table captions. To prevent this problem, be sure and preload
+% caption.sty with its "caption=false" package option. This is will preserve
+% IEEEtran.cls handing of captions. Version 1.3 (2005/06/28) and later
+% (recommended due to many improvements over 1.2) of subfig.sty supports
+% the caption=false option directly:
+%\usepackage[caption=false,font=footnotesize]{subfig}
+%
+% The latest version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/subfig/
+% The latest version and documentation of caption.sty can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/caption/
+
+
+
+
+% *** FLOAT PACKAGES ***
+%
+%\usepackage{fixltx2e}
+% fixltx2e, the successor to the earlier fix2col.sty, was written by
+% Frank Mittelbach and David Carlisle. This package corrects a few problems
+% in the LaTeX2e kernel, the most notable of which is that in current
+% LaTeX2e releases, the ordering of single and double column floats is not
+% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a
+% single column figure to be placed prior to an earlier double column
+% figure. The latest version and documentation can be found at:
+% http://www.ctan.org/tex-archive/macros/latex/base/
+
+
+
+%\usepackage{stfloats}
+% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e
+% the ability to do double column floats at the bottom of the page as well
+% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in
+% LaTeX2e). It also provides a command:
+%\fnbelowfloat
+% to enable the placement of footnotes below bottom floats (the standard
+% LaTeX2e kernel puts them above bottom floats). This is an invasive package
+% which rewrites many portions of the LaTeX2e float routines. It may not work
+% with other packages that modify the LaTeX2e float routines. The latest
+% version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/sttools/
+% Documentation is contained in the stfloats.sty comments as well as in the
+% presfull.pdf file. Do not use the stfloats baselinefloat ability as IEEE
+% does not allow \baselineskip to stretch. Authors submitting work to the
+% IEEE should note that IEEE rarely uses double column equations and
+% that authors should try to avoid such use. Do not be tempted to use the
+% cuted.sty or midfloat.sty packages (also by Sigitas Tolusis) as IEEE does
+% not format its papers in such ways.
+
+
+
+
+
+% *** PDF, URL AND HYPERLINK PACKAGES ***
+%
+\usepackage{url}
+% url.sty was written by Donald Arseneau. It provides better support for
+% handling and breaking URLs. url.sty is already installed on most LaTeX
+% systems. The latest version can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/misc/
+% Read the url.sty source comments for usage information. Basically,
+% \url{my_url_here}.
+
+
+
+
+
+% *** Do not adjust lengths that control margins, column widths, etc. ***
+% *** Do not use packages that alter fonts (such as pslatex). ***
+% There should be no need to do such things with IEEEtran.cls V1.6 and later.
+% (Unless specifically asked to do so by the journal or conference you plan
+% to submit to, of course. )
+
+
+% correct bad hyphenation here
+\hyphenation{op-tical net-works semi-conduc-tor}
+
+
+\begin{document}
+%
+% paper title
+% can use linebreaks \\ within to get better formatting as desired
+\title{Pr\'actica 1 Avance 4}
+
+
+% author names and affiliations
+% use a multiple column layout for up to three different
+% affiliations
+\author{\IEEEauthorblockN{Alejandro Cavadavid}
+\IEEEauthorblockA{Universidad EAFIT\\
+Medell\'in, Colombia\\
+Email: acadavid@eafit.edu.co}
+\and
+\IEEEauthorblockN{Adolfo Builes}
+\IEEEauthorblockA{Universidad EAFIT\\
+Medell\'in, Colombia\\
+Email: abuilesj@eafit.edu.co}
+\and
+\IEEEauthorblockN{Sebastian Castillo}
+\IEEEauthorblockA{Universidad EAFIT\\
+Medell\'in, Colombia\\
+Email: scatil1@eafit.edu.co}}
+
+% conference papers do not typically use \thanks and this command
+% is locked out in conference mode. If really needed, such as for
+% the acknowledgment of grants, issue a \IEEEoverridecommandlockouts
+% after \documentclass
+
+% for over three affiliations, or if they all won't fit within the width
+% of the page, use this alternative format:
+%
+%\author{\IEEEauthorblockN{Michael Shell\IEEEauthorrefmark{1},
+%Homer Simpson\IEEEauthorrefmark{2},
+%James Kirk\IEEEauthorrefmark{3},
+%Montgomery Scott\IEEEauthorrefmark{3} and
+%Eldon Tyrell\IEEEauthorrefmark{4}}
+%\IEEEauthorblockA{\IEEEauthorrefmark{1}School of Electrical and Computer Engineering\\
+%Georgia Institute of Technology,
+%Atlanta, Georgia 30332--0250\\ Email: see http://www.michaelshell.org/contact.html}
+%\IEEEauthorblockA{\IEEEauthorrefmark{2}Twentieth Century Fox, Springfield, USA\\
+%Email: homer@thesimpsons.com}
+%\IEEEauthorblockA{\IEEEauthorrefmark{3}Starfleet Academy, San Francisco, California 96678-2391\\
+%Telephone: (800) 555--1212, Fax: (888) 555--1212}
+%\IEEEauthorblockA{\IEEEauthorrefmark{4}Tyrell Inc., 123 Replicant Street, Los Angeles, California 90210--4321}}
+
+
+
+
+% use for special paper notices
+%\IEEEspecialpapernotice{(Invited Paper)}
+
+
+
+
+% make the title area
+\maketitle
+
+
+\begin{abstract}
+%\boldmath
+Durante esta 4 semanas de trabajo, hemos venido haciendo
+refinaciones sobre los problemas propuestos, para este informe y gracias a la ayuda
+brindada por los anteriores, ya tenemos implementados en lenguaje ensamblador
+ operaciones de suma, resta, transpuesta de una matriz y multiplicación por escalar.
+\end{abstract}
+% IEEEtran.cls defaults to using nonbold math in the Abstract.
+% This preserves the distinction between vectors and scalars. However,
+% if the conference you are submitting to favors bold math in the abstract,
+% then you can use LaTeX's standard command \boldmath at the very start
+% of the abstract to achieve this. Many IEEE journals/conferences frown on
+% math in the abstract anyway.
+
+% no keywords
+
+
+
+
+% For peer review papers, you can put extra information on the cover
+% page as needed:
+% \ifCLASSOPTIONpeerreview
+% \begin{center} \bfseries EDICS Category: 3-BBND \end{center}
+% \fi
+%
+% For peerreview papers, this IEEEtran command inserts a page break and
+% creates the second title. It will be ignored for other modes.
+\thispagestyle{fancy}
+\IEEEpeerreviewmaketitle
+
+
+
+\section{Suma de matrices}
+% no \IEEEPARstart
+% You must have at least 2 lines in the paragraph with the drop letter
+% (should never be an issue)
+
+%\hfill mds
+
+%\hfill January 11, 2007
+
+\subsection{De la refinaci\'on al c\'odigo}
+Luego de examinar cada uno de los diagramas de flujo, y llegar al de nivel m\'as
+bajo, y teniendo en cuenta adem\'as lo de mas alto nivel, fue muy f\'acil pasar a
+implementar la soluci\'on en lenguaje ensamblador, tal vez, en lo que gastamos algo de tiempo fue en la compresi\'on del coprocesador para las operaciones con dobles. Es esta versi\'on estamos trabajando con matrices quemadas en el c\'odigo, esta son de un tamaño de 2 filas y 2 columnas.
+\subsection{Implementaci\'on}
+Partiendo del diagrada de la Figura 1 (Fig.1),
+\begin{figure}[!h]
+\centering
+\includegraphics[width=2.5in]{suma3}
+\caption{Diagrama de flujo para la suma de matrices}
+\label{fig_sim}
+\end{figure}
+\vspace{0.1in}
+llegar a la implentacion en lenguaje ensamblador se hizo de una manera muy intuitiva,
+el siguiente c\'odigo corresponde a la suma de matrices de tamaño flotante.
+\begin{lstlisting}[language={[x86masm]Assembler}]
+segment .data
+matriz1: dq 4.0,1.0,4.0,1.0
+matriz2: dq 3.0,1.0,4.0,1.0
+ msg2: db ``%lf ,'',10,0
+
+segment .bss
+matriz3: resq 10
+aux: resd 1
+aux2: resd 1
+aux3: resq 1
+
+segment .text
+ global main
+ extern printf
+main:
+ mov eax,matriz1
+ mov ebx,matriz2
+ mov edx,matriz3
+ mov ecx,10
+ jmp lp
+
+lp:
+ fld qword [eax]
+ fld qword [ebx]
+ faddp st1
+ fstp qword [edx]
+ add eax,8
+ add ebx,8
+ add edx,8
+ loop lp
+ mov ecx,10
+ mov eax,matriz3
+ call printm
+ jmp exit
+
+printm:
+ mov [aux],eax
+ mov [aux2],ecx
+ push dword [eax+4]
+ push dword [eax]
+ push dword msg2
+ call printf
+ add esp,12
+ mov eax,[aux]
+ mov ecx,[aux2]
+ add eax,8
+ loop printm
+
+exit:
+ mov eax,1
+ mov ebx,0
+ int 0x80
+\end{lstlisting}
+\section{Resta de matrices}
+% no \IEEEPARstart
+% You must have at least 2 lines in the paragraph with the drop letter
+% (should never be an issue)
+
+%\hfill mds
+
+%\hfill January 11, 2007
+
+\subsection{Implementaci\'on}
+Al igual que para la suma, teniendo el diagrama (Fig.2),
+\begin{figure}[!h]
+\centering
+\includegraphics[width=2.8in]{resta3}
+\caption{Diagrama de flujo para la resta de matrices}
+\label{fig_sim}
+\end{figure}
+\vspace{0.1in}
+es inmediato el paso al c\'odigo ensamblador, adem\'as
+es muy parecido a la suma.
+\begin{lstlisting}[language={[x86masm]Assembler}]
+segment .data
+matriz1: dq 4.0,1.0,4.0,1.0
+matriz2: dq 3.0,0.0,3.0,0.0
+ msg2: db ``%lf ,'',10,0
+
+segment .bss
+matriz3: resq 10
+aux: resd 1
+aux2: resd 1
+aux3: resq 1
+
+segment .text
+ global main
+ extern printf
+main:
+ mov eax,matriz1
+ mov ebx,matriz2
+ mov edx,matriz3
+ mov ecx,10
+ jmp lp
+
+lp:
+ fld qword [eax]
+ fld qword [ebx]
+ fsubp st1
+ fstp qword [edx]
+ add eax,8
+ add ebx,8
+ add edx,8
+ loop lp
+ mov ecx,10
+ mov eax,matriz3
+ call printm
+ jmp exit
+
+printm:
+ mov [aux],eax
+ mov [aux2],ecx
+ push dword [eax+4]
+ push dword [eax]
+ push dword msg2
+ call printf
+ add esp,12
+ mov eax,[aux]
+ mov ecx,[aux2]
+ add eax,8
+ loop printm
+
+exit:
+ mov eax,1
+ mov ebx,0
+ int 0x80
+\end{lstlisting}
+
+\section{Multiplicaci\'on de Matriz por escalar}
+% no \IEEEPARstart
+% You must have at least 2 lines in the paragraph with the drop letter
+% (should never be an issue)
+
+%\hfill mds
+
+%\hfill January 11, 2007
+\subsection{Implementaci\'on}
+El diagrama (Fig.3), nos muestra el diagrama de flujo de ultimo nivel para esta
+operaci\'on,
+\begin{figure}[!h]
+\centering
+\includegraphics[width=2.5in]{escalar3}
+\caption{Diagrama de flujo para la multiplicacion de matriz por escalar}
+\label{fig_sim}
+\end{figure}
+\vspace{0.1in}
+el siguiente c\'odigo corresponde a la multiplicaci\'on de una matriz por un escalar,
+en este ejemplo estamos usando un escalar de tipo doble.
+\begin{lstlisting}[language={[x86masm]Assembler}]
+segment .data
+matriz1: dq 4.0,1.0,4.0,1.0
+escalar: dq 2.0
+ msg2: db ``%lf ,'',10,0
+
+segment .bss
+matriz3: resq 10
+aux: resd 1
+aux2: resd 1
+aux3: resq 1
+
+segment .text
+ global main
+ extern printf
+main:
+ mov eax,matriz1
+ mov edx,matriz3
+ mov ecx,10
+ jmp lp
+
+lp:
+ fld qword [eax]
+ fld qword [escalar]
+ fmulp st1
+ fstp qword [edx]
+ add eax,8
+ add edx,8
+ loop lp
+ mov ecx,10
+ mov eax,matriz3
+ call printm
+ jmp exit
+
+printm:
+ mov [aux],eax
+ mov [aux2],ecx
+ push dword [eax+4]
+ push dword [eax]
+ push dword msg2
+ call printf
+ add esp,12
+ mov eax,[aux]
+ mov ecx,[aux2]
+ add eax,8
+ loop printm
+
+exit:
+ mov eax,1
+ mov ebx,0
+ int 0x80
+\end{lstlisting}
+
+\section{Matriz transpuesta}
+\subsection{Diagramas de flujo}
+Incluimos los diagramas de flujo a tres niveles, para el proceso de obtener la matriz
+transpuesta.
+
+\begin{figure}[!h]
+\centering
+\includegraphics[width=2.5in]{trans1}
+\caption{Diagrama de flujo a nivel general}
+\label{fig_sim}
+\end{figure}
+\vspace{0.1in}
+
+\begin{figure}[!h]
+\centering
+\includegraphics[width=2.5in]{trans2}
+\caption{Diagrama de flujo a nivel 1}
+\label{fig_sim}
+\end{figure}
+\vspace{0.1in}
+\newpage
+\begin{figure}[!h]
+\centering
+\includegraphics[width=2.5in]{trans3}
+\caption{Diagrama de flujo a nivel 2}
+\label{fig_sim}
+\end{figure}
+\vspace{0.1in}
+
+
+% no \IEEEPARstart
+% You must have at least 2 lines in the paragraph with the drop letter
+% (should never be an issue)
+
+%\hfill mds
+
+%\hfill January 11, 2007
+%% \subsection{Implementaci\'on}
+%% El diagrama (Fig.6), nos muestra el diagrama de flujo de ultimo nivel para obtener
+%% la matriz transpuesta, la siguiente es la implementaci\'on en lenguaje ensamblador.
+%% \begin{lstlisting}[language={[x86masm]Assembler}]
+%% exit:
+%% mov eax,1
+%% mov ebx,0
+%% int 0x80
+%% \end{lstlisting}
+% An example of a floating figure using the graphicx package.
+% Note that \label must occur AFTER (or within) \caption.
+% For figures, \caption should occur after the \includegraphics.
+% Note that IEEEtran v1.7 and later has special internal code that
+% is designed to preserve the operation of \label within \caption
+% even when the captionsoff option is in effect. However, because
+% of issues like this, it may be the safest practice to put all your
+% \label just after \caption rather than within \caption{}.
+%
+% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class
+% option should be used if it is desired that the figures are to be
+% displayed while in draft mode.
+%
+%\begin{figure}[!t]
+%\centering
+%\includegraphics[width=2.5in]{myfigure}
+% where an .eps filename suffix will be assumed under latex,
+% and a .pdf suffix will be assumed for pdflatex; or what has been declared
+% via \DeclareGraphicsExtensions.
+%\caption{Simulation Results}
+%\label{fig_sim}
+%\end{figure}
+
+% Note that IEEE typically puts floats only at the top, even when this
+% results in a large percentage of a column being occupied by floats.
+
+
+% An example of a double column floating figure using two subfigures.
+% (The subfig.sty package must be loaded for this to work.)
+% The subfigure \label commands are set within each subfloat command, the
+% \label for the overall figure must come after \caption.
+% \hfil must be used as a separator to get equal spacing.
+% The subfigure.sty package works much the same way, except \subfigure is
+% used instead of \subfloat.
+%
+%\begin{figure*}[!t]
+%\centerline{\subfloat[Case I]\includegraphics[width=2.5in]{subfigcase1}%
+%\label{fig_first_case}}
+%\hfil
+%\subfloat[Case II]{\includegraphics[width=2.5in]{subfigcase2}%
+%\label{fig_second_case}}}
+%\caption{Simulation results}
+%\label{fig_sim}</