Click the image or links below to go to a specific product in the Adafruit shop.
PCB files for the Adafruit PiTFT Plus 2.8" Display. Format is EagleCAD schematic and board layout
- Resistive Screen https://www.adafruit.com/product/2298
- Capacitive Touch Screen https://www.adafruit.com/product/2423
Are these not the cutest little displays for the Raspberry Pi? They feature a 2.8" display with 320x240 16-bit color pixels and a resistive touchscreen or capacitive touch overlay..
This updated design fits perfectly onto the Pi Zero, Pi 3, Pi 2 or Model A+, B+! (Any Pi with a 2x20 connector) Not for use with an old Pi 1 with 2x13 connector If you'd like to use a 2.8" display with the original Pi A or Pi B, check out the Model B version. This version also has all 40 pins GPIO pins brought out so you can connect a 40-pin GPIO cable underneath. Now that it's the same outline as a Pi 3/2/B+ it fits well on top of a Pi in our Raspberry Pi Enclosure base and can use our faceplate for a compact touchscreen Pi
The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. All other GPIO are unused and you can still share the I2C pins with sensors, LED drivers, etc. Since we had a tiny bit of space, there's 4 slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button.
Adafruit invests time and resources providing this open source design, please support Adafruit and open-source hardware by purchasing products from Adafruit.com!
Creative Commons Attribution, Share-Alike license, check license.txt for more information All text above must be included in any redistribution - See license.txt for more information.