Skip to content
PCB files for the Adafruit SAMD09 microcontroller breakout
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
assets
ATSAMD09D14 Breakout rev B.brd
ATSAMD09D14 Breakout rev B.sch
README.md
license.txt

README.md

Adafruit SAMD09 Breakout PCB


Click here to purchase one from the Adafruit shop

PCB files for the Adafruit SAMD09 microcontroller breakout

Format is EagleCAD schematic and board layout

For more details, check out the product page at

Description

Adafruit seesaw is a near-universal converter framework which allows you to add add and extend hardware support to any I2C-capable microcontroller or microcomputer. Instead of getting separate I2C GPIO expanders, ADCs, PWM drivers, etc, seesaw can be configured to give a wide range of capabilities.

For example, our ATSAMD09 breakout with seesaw gives you

  • 3 x 12-bit ADC inputs
  • 3 x 8-bit PWM outputs
  • 7 x GPIO with selectable pullup or pulldown
  • 1 x NeoPixel output (up to 340 pixels)
  • 1 x EEPROM with 64 byte of NVM memory (handy for storing small access tokens or MAC addresses)
  • 1 x Interrupt output that can be triggered by any of the accessories
  • 2 x I2C address selection pins
  • 1 x Activity LED

But you can reprogram and reconfigure the chip to have more or less of each peripheral - as long as it fits into the ATSAMD09D14's firmware! For example, there's also a UART converter but it isn't included in the default firmware.

The ATSAMD09 breakout is great for development of seesaw capabilities (we use it in-house for our design work) or you can use it as-is to give your Raspberry Pi or ESP8266 more hardware support! Each breakout comes with the assembled and tested board, as well as some header strips.

Please note: The boards do not come with a bootloader. If you want to do development on seesaw (e.g. changing the configuration) you'll need to pick up a J-Link and we recommend a SWD adapter breakout.

License

Adafruit invests time and resources providing this open source design, please support Adafruit and open-source hardware by purchasing products from Adafruit!

Designed by Limor Fried/Ladyada for Adafruit Industries.

Creative Commons Attribution/Share-Alike, all text above must be included in any redistribution. See license.txt for additional details.

You can’t perform that action at this time.