Switch branches/tags
Nothing to show
Find file Copy path
executable file 172 lines (138 sloc) 5.84 KB
This is the Adafruit GPS library - the ultimate GPS library
for the ultimate GPS module!
Tested and works great with the Adafruit Ultimate GPS module
using MTK33x9 chipset
Pick one up today at the Adafruit electronics shop
and help support open source hardware & software! -ada
Adafruit invests time and resources providing this open source code,
please support Adafruit and open-source hardware by purchasing
products from Adafruit!
Written by Limor Fried/Ladyada for Adafruit Industries.
BSD license, check license.txt for more information
All text above must be included in any redistribution
// Fllybob added lines 34,35 and 40,41 to add 100mHz logging capability
//comment this out if you don't want to include software serial in the library
#if defined(__AVR__) && defined(USE_SW_SERIAL)
#if ARDUINO >= 100
#include <SoftwareSerial.h>
#include <NewSoftSerial.h>
// different commands to set the update rate from once a second (1 Hz) to 10 times a second (10Hz)
// Note that these only control the rate at which the position is echoed, to actually speed up the
// position fix you must also send one of the position fix rate commands below too.
#define PMTK_SET_NMEA_UPDATE_100_MILLIHERTZ "$PMTK220,10000*2F" // Once every 10 seconds, 100 millihertz.
#define PMTK_SET_NMEA_UPDATE_200_MILLIHERTZ "$PMTK220,5000*1B" // Once every 5 seconds, 200 millihertz.
#define PMTK_SET_NMEA_UPDATE_1HZ "$PMTK220,1000*1F"
#define PMTK_SET_NMEA_UPDATE_2HZ "$PMTK220,500*2B"
#define PMTK_SET_NMEA_UPDATE_5HZ "$PMTK220,200*2C"
#define PMTK_SET_NMEA_UPDATE_10HZ "$PMTK220,100*2F"
// Position fix update rate commands.
#define PMTK_API_SET_FIX_CTL_100_MILLIHERTZ "$PMTK300,10000,0,0,0,0*2C" // Once every 10 seconds, 100 millihertz.
#define PMTK_API_SET_FIX_CTL_200_MILLIHERTZ "$PMTK300,5000,0,0,0,0*18" // Once every 5 seconds, 200 millihertz.
#define PMTK_API_SET_FIX_CTL_1HZ "$PMTK300,1000,0,0,0,0*1C"
#define PMTK_API_SET_FIX_CTL_5HZ "$PMTK300,200,0,0,0,0*2F"
// Can't fix position faster than 5 times a second!
#define PMTK_SET_BAUD_57600 "$PMTK251,57600*2C"
#define PMTK_SET_BAUD_9600 "$PMTK251,9600*17"
// turn on only the second sentence (GPRMC)
#define PMTK_SET_NMEA_OUTPUT_RMCONLY "$PMTK314,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0*29"
// turn on GPRMC and GGA
#define PMTK_SET_NMEA_OUTPUT_RMCGGA "$PMTK314,0,1,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0*28"
// turn on ALL THE DATA
#define PMTK_SET_NMEA_OUTPUT_ALLDATA "$PMTK314,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0*28"
// turn off output
#define PMTK_SET_NMEA_OUTPUT_OFF "$PMTK314,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0*28"
// to generate your own sentences, check out the MTK command datasheet and use a checksum calculator
// such as the awesome
#define PMTK_LOCUS_STARTLOG "$PMTK185,0*22"
#define PMTK_LOCUS_STOPLOG "$PMTK185,1*23"
#define PMTK_LOCUS_ERASE_FLASH "$PMTK184,1*22"
#define PMTK_ENABLE_SBAS "$PMTK313,1*2E"
#define PMTK_ENABLE_WAAS "$PMTK301,2*2E"
// standby command & boot successful message
#define PMTK_STANDBY "$PMTK161,0*28"
#define PMTK_STANDBY_SUCCESS "$PMTK001,161,3*36" // Not needed currently
#define PMTK_AWAKE "$PMTK010,002*2D"
// ask for the release and version
#define PMTK_Q_RELEASE "$PMTK605*31"
// request for updates on antenna status
#define PGCMD_ANTENNA "$PGCMD,33,1*6C"
#define PGCMD_NOANTENNA "$PGCMD,33,0*6D"
// how long to wait when we're looking for a response
#if ARDUINO >= 100
#include "Arduino.h"
#if defined (__AVR__) && !defined(__AVR_ATmega32U4__)
#include "SoftwareSerial.h"
#include "WProgram.h"
#include "NewSoftSerial.h"
class Adafruit_GPS {
void begin(uint32_t baud);
#if defined(__AVR__) && defined(USE_SW_SERIAL)
#if ARDUINO >= 100
Adafruit_GPS(SoftwareSerial *ser); // Constructor when using SoftwareSerial
Adafruit_GPS(NewSoftSerial *ser); // Constructor when using NewSoftSerial
Adafruit_GPS(HardwareSerial *ser); // Constructor when using HardwareSerial
char *lastNMEA(void);
boolean newNMEAreceived();
void common_init(void);
void sendCommand(const char *);
void pause(boolean b);
boolean parseNMEA(char *response);
uint8_t parseHex(char c);
char read(void);
boolean parse(char *);
boolean wakeup(void);
boolean standby(void);
uint8_t hour, minute, seconds, year, month, day;
uint16_t milliseconds;
// Floating point latitude and longitude value in degrees.
float latitude, longitude;
// Fixed point latitude and longitude value with degrees stored in units of 1/100000 degrees,
// and minutes stored in units of 1/100000 degrees. See pull #13 for more details:
int32_t latitude_fixed, longitude_fixed;
float latitudeDegrees, longitudeDegrees;
float geoidheight, altitude;
float speed, angle, magvariation, HDOP;
char lat, lon, mag;
boolean fix;
uint8_t fixquality, satellites;
boolean waitForSentence(const char *wait, uint8_t max = MAXWAITSENTENCE);
boolean LOCUS_StartLogger(void);
boolean LOCUS_StopLogger(void);
boolean LOCUS_ReadStatus(void);
uint16_t LOCUS_serial, LOCUS_records;
uint8_t LOCUS_type, LOCUS_mode, LOCUS_config, LOCUS_interval, LOCUS_distance, LOCUS_speed, LOCUS_status, LOCUS_percent;
boolean paused;
uint8_t parseResponse(char *response);
#if defined(__AVR__) && defined(USE_SW_SERIAL)
#if ARDUINO >= 100
SoftwareSerial *gpsSwSerial;
NewSoftSerial *gpsSwSerial;
HardwareSerial *gpsHwSerial;