Branch: master
Find file History
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
..
Failed to load latest commit information.
images
README.md
bluponix-space-v2.2_soil-auto-garden.ino.ino

README.md

Default Software for BluPonix SPACE v2.2 Automatic Garden (Soil-Grow) Hobby Kit Starter Set

This is the repository for the default software that ships with any Bluponix Space v2.2 IO board + Arduino Uno hardware automatic garden hobby kit starter set for personal cultivation.

Technical details and more information specific the Space v2.2 IO hardware platform can be found here

  • watering cycles start at moisture level 4 (of 10) & repeats until moisture level reaches 7

4 Operating Modes - Set using jumpers/wires:

Mode 1:  Single Relay Parallel Cycling - 45s water cycle

- both 12V DC pump channels switch on in parallel to water from the reservoir

- Relay 1 triggers in parallel for the same duration as the 12V channel pump water cycles

- Water Level Sensor Switch triggers Relay 2 for 45s on water low (reservoir refill / light alert)

jumper wire connectors shown in red ________________________________________________________________________________________________________________________________

Mode 2:  Single Relay Parallel Cycling - 90s water cycle

- both 12V DC pump channels switch on in parallel to water from the reservoir

- Relay 1 also triggers on for the duration of the 12V channel pump water cycles

- Water Level Sensor Switch triggers Relay 2 for 90s on water low (reservoir refill / light alert)

jumper wire connections shown in red ________________________________________________________________________________________________________________________________

Mode 3:  Dual Relay Parallel Water Cycling - 90s water cycle

- Both Relay 1 and Relay 2 trigger on and off (in parallel) for the duration of the watering cycle

- 12V DC pump channel 1 also switches on to water from the reservoir for duration of watering cycle

- Water Level Sensor Switch triggers 12V DC pump channel 2 for 90s to refill small reservoir

jumper wire connections shown in red _________________________________________________________________________________________________________________________________

Mode 4:  Dual Relay Parallel Water Cycling - 90s water cycle

- Relay 1 and Relay 2 trigger on and off (sequentially) each for the duration of the watering cycle

- 12V DC pump channel 1 switches on to water from the reservoir for the duration of both cycles

- Water Level Sensor Switch triggers 12V DC pump channel 2 for 90s to refill small reservoir

___________________________________________________________________________________________________________________________________