NM Cura profile with added post print cooling

Cura/NewMatterModT.ini

@@ -0,0 +1,142 @@
+[machine]
+machine_name = New Matter Mod-T
+machine_type = reprap
+machine_width = 155.4
+machine_depth = 104.6
+machine_height = 130
+machine_center_is_zero = True
+machine_shape = Square
+ultimaker_extruder_upgrade = False
+has_heated_bed = False
+gcode_flavor = RepRap (Marlin/Sprinter)
+extruder_amount = 1
+extruder_offset_x1 = 0.0
+extruder_offset_y1 = 21.6
+extruder_offset_x2 = 0.0
+extruder_offset_y2 = 0.0
+extruder_offset_x3 = 0.0
+extruder_offset_y3 = 0.0
+extruder_offset_x4 = 0.0
+extruder_offset_y4 = 0.0
+steps_per_e = 0
+serial_port = AUTO
+serial_port_auto = 
+serial_baud = AUTO
+serial_baud_auto = 
+extruder_head_size_min_x = 0
+extruder_head_size_min_y = 0
+extruder_head_size_max_x = 0
+extruder_head_size_max_y = 0
+extruder_head_size_height = 0
+
+[profile]
+layer_height = 0.2
+wall_thickness = 1.2
+retraction_enable = True
+solid_layer_thickness = 0.3
+fill_density = 25
+print_speed = 60
+print_temperature = 210
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 70
+support = Everywhere
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 1.75
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100.0
+nozzle_size = 0.4
+retraction_speed = 150
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.02
+retraction_hop = 0.0
+bottom_thickness = 0.3
+layer0_width_factor = 100
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 80.0
+bottom_layer_speed = 30
+infill_speed = 60
+solidarea_speed = 0.0
+inset0_speed = 30
+insetx_speed = 40
+cool_min_layer_time = 5
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 150.0
+fan_full_height = 0
+fan_speed = 100
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+perimeter_before_infill = False
+support_type = Lines
+support_angle = 60
+support_fill_rate = 15
+support_xy_distance = 0.7
+support_z_distance = 0.25
+spiralize = False
+simple_mode = False
+brim_line_count = 20
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.22
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = 0
+object_center_y = 0
+
+[alterations]
+start.gcode = 
+;Sliced at: {day} {date} {time}
+;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+;Print time: {print_time}
+;Filament used: {filament_amount}m {filament_weight}g
+M109 S210.0
+M42 P10 S1 ; Turn on LED
+G21 ; set units to millimeters
+G90 ; use absolute coordinates
+M82 ; use absolute distances for extrusion
+M204 S500
+G0 Z1 F300 ; Make sure main Z drop isn't too fast
+G0 X0 Y0 F5000
+G92 X77.7 Y52.3 ; Offset Origin from center to top right corner to accommodate Astroprint requirement
+G92 E0
+end.gcode = 
+G92 E0
+M106 S255 ; Turn fan on to 100%
+G0 Z125 F300; Go high
+G0 X77.7 Y52.3 F3000
+G92 X0 Y0 ; Change Offset back to center
+G0 X0 Y50 F3000; Go front and center
+M109 S28 ; Wait for hotend to cool
+M104 S0 ; Turn off temperature
+M107      ; Turn off fan
+M84        ; Disable motors