reference.conf

####################################
# Akka Actor Reference Config File #
####################################

# This is the reference config file that contains all the default settings.
# Make your edits/overrides in your application.conf.

# Akka version, checked against the runtime version of Akka. Loaded from generated conf file.
include "version"

akka {
  # Home directory of Akka, modules in the deploy directory will be loaded
  home = ""

  # Loggers to register at boot time (akka.event.Logging$DefaultLogger logs
  # to STDOUT)
  loggers = ["akka.event.Logging$DefaultLogger"]

  # Filter of log events that is used by the LoggingAdapter before
  # publishing log events to the eventStream. It can perform
  # fine grained filtering based on the log source. The default
  # implementation filters on the `loglevel`.
  # FQCN of the LoggingFilter. The Class of the FQCN must implement
  # akka.event.LoggingFilter and have a public constructor with
  # (akka.actor.ActorSystem.Settings, akka.event.EventStream) parameters.
  logging-filter = "akka.event.DefaultLoggingFilter"

  # Specifies the default loggers dispatcher
  loggers-dispatcher = "akka.actor.default-dispatcher"

  # Loggers are created and registered synchronously during ActorSystem
  # start-up, and since they are actors, this timeout is used to bound the
  # waiting time
  logger-startup-timeout = 5s

  # Log level used by the configured loggers (see "loggers") as soon
  # as they have been started; before that, see "stdout-loglevel"
  # Options: OFF, ERROR, WARNING, INFO, DEBUG
  loglevel = "INFO"

  # Log level for the very basic logger activated during ActorSystem startup.
  # This logger prints the log messages to stdout (System.out).
  # Options: OFF, ERROR, WARNING, INFO, DEBUG
  stdout-loglevel = "WARNING"

  # Log the complete configuration at INFO level when the actor system is started.
  # This is useful when you are uncertain of what configuration is used.
  log-config-on-start = off

  # Log at info level when messages are sent to dead letters, or published to
  # eventStream as `DeadLetter`, `Dropped` or `UnhandledMessage`.
  # Possible values:
  # on: all dead letters are logged
  # off: no logging of dead letters
  # n: positive integer, number of dead letters that will be logged
  log-dead-letters = 10

  # Possibility to turn off logging of dead letters while the actor system
  # is shutting down. Logging is only done when enabled by 'log-dead-letters'
  # setting.
  log-dead-letters-during-shutdown = off

  # When log-dead-letters is enabled, this will re-enable the logging after configured duration.
  # infinite: suspend the logging forever;
  # or a duration (eg: 5 minutes), after which the logging will be re-enabled.
  log-dead-letters-suspend-duration = 5 minutes

  # List FQCN of extensions which shall be loaded at actor system startup.
  # Library extensions are regular extensions that are loaded at startup and are
  # available for third party library authors to enable auto-loading of extensions when
  # present on the classpath. This is done by appending entries:
  # 'library-extensions += "Extension"' in the library `reference.conf`.
  #
  # Should not be set by end user applications in 'application.conf', use the extensions property for that
  #
  library-extensions = ${?akka.library-extensions} ["akka.serialization.SerializationExtension$"]

  # List FQCN of extensions which shall be loaded at actor system startup.
  # Should be on the format: 'extensions = ["foo", "bar"]' etc.
  # See the Akka Documentation for more info about Extensions
  extensions = []

  # Toggles whether threads created by this ActorSystem should be daemons or not
  daemonic = off

  # JVM shutdown, System.exit(-1), in case of a fatal error,
  # such as OutOfMemoryError
  jvm-exit-on-fatal-error = on

  # Akka installs JVM shutdown hooks by default, e.g. in CoordinatedShutdown and Artery. This property will
  # not disable user-provided hooks registered using `CoordinatedShutdown#addCancellableJvmShutdownHook`.
  # This property is related to `akka.coordinated-shutdown.run-by-jvm-shutdown-hook` below.
  # This property makes it possible to disable all such hooks if the application itself
  # or a higher level framework such as Play prefers to install the JVM shutdown hook and
  # terminate the ActorSystem itself, with or without using CoordinatedShutdown.
  jvm-shutdown-hooks = on

  # Version must be the same across all modules and if they are different the startup
  # will fail. It's possible but not recommended, to disable this check, and only log a warning,
  # by setting this property to `off`.
  fail-mixed-versions = on

  # Some modules (remoting only right now) can emit custom events to the Java Flight Recorder if running
  # on JDK 11 or later. If you for some reason do not want that, it can be disabled and switched to no-ops
  # with this toggle.
  java-flight-recorder {
    enabled = true
  }

  actor {

    # Either one of "local", "remote" or "cluster" or the
    # FQCN of the ActorRefProvider to be used; the below is the built-in default,
    # note that "remote" and "cluster" requires the akka-remote and akka-cluster
    # artifacts to be on the classpath.
    provider = "local"

    # The guardian "/user" will use this class to obtain its supervisorStrategy.
    # It needs to be a subclass of akka.actor.SupervisorStrategyConfigurator.
    # In addition to the default there is akka.actor.StoppingSupervisorStrategy.
    guardian-supervisor-strategy = "akka.actor.DefaultSupervisorStrategy"

    # Timeout for Extension creation and a few other potentially blocking
    # initialization tasks.
    creation-timeout = 20s

    # Serializes and deserializes (non-primitive) messages to ensure immutability,
    # this is only intended for testing.
    serialize-messages = off

    # Serializes and deserializes creators (in Props) to ensure that they can be
    # sent over the network, this is only intended for testing. Purely local deployments
    # as marked with deploy.scope == LocalScope are exempt from verification.
    serialize-creators = off

    # If serialize-messages or serialize-creators are enabled classes that starts with
    # a prefix listed here are not verified.
    no-serialization-verification-needed-class-prefix = ["akka."]

    # Timeout for send operations to top-level actors which are in the process
    # of being started. This is only relevant if using a bounded mailbox or the
    # CallingThreadDispatcher for a top-level actor.
    unstarted-push-timeout = 10s

    # TypedActor deprecated since 2.6.0.
    typed {
      # Default timeout for the deprecated TypedActor (not the new actor APIs in 2.6)
      # methods with non-void return type.
      timeout = 5s
    }

    # Mapping between ´deployment.router' short names to fully qualified class names
    router.type-mapping {
      from-code = "akka.routing.NoRouter"
      round-robin-pool = "akka.routing.RoundRobinPool"
      round-robin-group = "akka.routing.RoundRobinGroup"
      random-pool = "akka.routing.RandomPool"
      random-group = "akka.routing.RandomGroup"
      balancing-pool = "akka.routing.BalancingPool"
      smallest-mailbox-pool = "akka.routing.SmallestMailboxPool"
      broadcast-pool = "akka.routing.BroadcastPool"
      broadcast-group = "akka.routing.BroadcastGroup"
      scatter-gather-pool = "akka.routing.ScatterGatherFirstCompletedPool"
      scatter-gather-group = "akka.routing.ScatterGatherFirstCompletedGroup"
      tail-chopping-pool = "akka.routing.TailChoppingPool"
      tail-chopping-group = "akka.routing.TailChoppingGroup"
      consistent-hashing-pool = "akka.routing.ConsistentHashingPool"
      consistent-hashing-group = "akka.routing.ConsistentHashingGroup"
    }

    deployment {

      # deployment id pattern - on the format: /parent/child etc.
      default {

        # The id of the dispatcher to use for this actor.
        # If undefined or empty the dispatcher specified in code
        # (Props.withDispatcher) is used, or default-dispatcher if not
        # specified at all.
        dispatcher = ""

        # The id of the mailbox to use for this actor.
        # If undefined or empty the default mailbox of the configured dispatcher
        # is used or if there is no mailbox configuration the mailbox specified
        # in code (Props.withMailbox) is used.
        # If there is a mailbox defined in the configured dispatcher then that
        # overrides this setting.
        mailbox = ""

        # routing (load-balance) scheme to use
        # - available: "from-code", "round-robin", "random", "smallest-mailbox",
        #              "scatter-gather", "broadcast"
        # - or:        Fully qualified class name of the router class.
        #              The class must extend akka.routing.CustomRouterConfig and
        #              have a public constructor with com.typesafe.config.Config
        #              and optional akka.actor.DynamicAccess parameter.
        # - default is "from-code";
        # Whether or not an actor is transformed to a Router is decided in code
        # only (Props.withRouter). The type of router can be overridden in the
        # configuration; specifying "from-code" means that the values specified
        # in the code shall be used.
        # In case of routing, the actors to be routed to can be specified
        # in several ways:
        # - nr-of-instances: will create that many children
        # - routees.paths: will route messages to these paths using ActorSelection,
        #   i.e. will not create children
        # - resizer: dynamically resizable number of routees as specified in
        #   resizer below
        router = "from-code"

        # number of children to create in case of a router;
        # this setting is ignored if routees.paths is given
        nr-of-instances = 1

        # within is the timeout used for routers containing future calls
        within = 5 seconds

        # number of virtual nodes per node for consistent-hashing router
        virtual-nodes-factor = 10

        tail-chopping-router {
          # interval is duration between sending message to next routee
          interval = 10 milliseconds
        }

        routees {
          # Alternatively to giving nr-of-instances you can specify the full
          # paths of those actors which should be routed to. This setting takes
          # precedence over nr-of-instances
          paths = []
        }

        # To use a dedicated dispatcher for the routees of the pool you can
        # define the dispatcher configuration inline with the property name
        # 'pool-dispatcher' in the deployment section of the router.
        # For example:
        # pool-dispatcher {
        #   fork-join-executor.parallelism-min = 5
        #   fork-join-executor.parallelism-max = 5
        # }

        # Routers with dynamically resizable number of routees; this feature is
        # enabled by including (parts of) this section in the deployment
        resizer {

          enabled = off

          # The fewest number of routees the router should ever have.
          lower-bound = 1

          # The most number of routees the router should ever have.
          # Must be greater than or equal to lower-bound.
          upper-bound = 10

          # Threshold used to evaluate if a routee is considered to be busy
          # (under pressure). Implementation depends on this value (default is 1).
          # 0:   number of routees currently processing a message.
          # 1:   number of routees currently processing a message has
          #      some messages in mailbox.
          # > 1: number of routees with at least the configured pressure-threshold
          #      messages in their mailbox. Note that estimating mailbox size of
          #      default UnboundedMailbox is O(N) operation.
          pressure-threshold = 1

          # Percentage to increase capacity whenever all routees are busy.
          # For example, 0.2 would increase 20% (rounded up), i.e. if current
          # capacity is 6 it will request an increase of 2 more routees.
          rampup-rate = 0.2

          # Minimum fraction of busy routees before backing off.
          # For example, if this is 0.3, then we'll remove some routees only when
          # less than 30% of routees are busy, i.e. if current capacity is 10 and
          # 3 are busy then the capacity is unchanged, but if 2 or less are busy
          # the capacity is decreased.
          # Use 0.0 or negative to avoid removal of routees.
          backoff-threshold = 0.3

          # Fraction of routees to be removed when the resizer reaches the
          # backoffThreshold.
          # For example, 0.1 would decrease 10% (rounded up), i.e. if current
          # capacity is 9 it will request an decrease of 1 routee.
          backoff-rate = 0.1

          # Number of messages between resize operation.
          # Use 1 to resize before each message.
          messages-per-resize = 10
        }

        # Routers with dynamically resizable number of routees based on
        # performance metrics.
        # This feature is enabled by including (parts of) this section in
        # the deployment, cannot be enabled together with default resizer.
        optimal-size-exploring-resizer {

          enabled = off

          # The fewest number of routees the router should ever have.
          lower-bound = 1

          # The most number of routees the router should ever have.
          # Must be greater than or equal to lower-bound.
          upper-bound = 10

          # probability of doing a ramping down when all routees are busy
          # during exploration.
          chance-of-ramping-down-when-full = 0.2

          # Interval between each resize attempt
          action-interval = 5s

          # If the routees have not been fully utilized (i.e. all routees busy)
          # for such length, the resizer will downsize the pool.
          downsize-after-underutilized-for = 72h

          # Duration exploration, the ratio between the largest step size and
          # current pool size. E.g. if the current pool size is 50, and the
          # explore-step-size is 0.1, the maximum pool size change during
          # exploration will be +- 5
          explore-step-size = 0.1

          # Probability of doing an exploration v.s. optimization.
          chance-of-exploration = 0.4

          # When downsizing after a long streak of underutilization, the resizer
          # will downsize the pool to the highest utiliziation multiplied by a
          # a downsize ratio. This downsize ratio determines the new pools size
          # in comparison to the highest utilization.
          # E.g. if the highest utilization is 10, and the down size ratio
          # is 0.8, the pool will be downsized to 8
          downsize-ratio = 0.8

          # When optimizing, the resizer only considers the sizes adjacent to the
          # current size. This number indicates how many adjacent sizes to consider.
          optimization-range = 16

          # The weight of the latest metric over old metrics when collecting
          # performance metrics.
          # E.g. if the last processing speed is 10 millis per message at pool
          # size 5, and if the new processing speed collected is 6 millis per
          # message at pool size 5. Given a weight of 0.3, the metrics
          # representing pool size 5 will be 6 * 0.3 + 10 * 0.7, i.e. 8.8 millis
          # Obviously, this number should be between 0 and 1.
          weight-of-latest-metric = 0.5
        }
      }

      "/IO-DNS/inet-address" {
        mailbox = "unbounded"
        router = "consistent-hashing-pool"
        nr-of-instances = 4
      }

      "/IO-DNS/inet-address/*" {
        dispatcher = "akka.actor.default-blocking-io-dispatcher"
      }

      "/IO-DNS/async-dns" {
        mailbox = "unbounded"
        router = "round-robin-pool"
        nr-of-instances = 1
      }
    }

    default-dispatcher {
      # Must be one of the following
      # Dispatcher, PinnedDispatcher, or a FQCN to a class inheriting
      # MessageDispatcherConfigurator with a public constructor with
      # both com.typesafe.config.Config parameter and
      # akka.dispatch.DispatcherPrerequisites parameters.
      # PinnedDispatcher must be used together with executor=thread-pool-executor.
      type = "Dispatcher"

      # Which kind of ExecutorService to use for this dispatcher
      # Valid options:
      #  - "default-executor" requires a "default-executor" section
      #  - "fork-join-executor" requires a "fork-join-executor" section
      #  - "thread-pool-executor" requires a "thread-pool-executor" section
      #  - "affinity-pool-executor" requires an "affinity-pool-executor" section
      #  - A FQCN of a class extending ExecutorServiceConfigurator
      executor = "default-executor"

      # This will be used if you have set "executor = "default-executor"".
      # If an ActorSystem is created with a given ExecutionContext, this
      # ExecutionContext will be used as the default executor for all
      # dispatchers in the ActorSystem configured with
      # executor = "default-executor". Note that "default-executor"
      # is the default value for executor, and therefore used if not
      # specified otherwise. If no ExecutionContext is given,
      # the executor configured in "fallback" will be used.
      default-executor {
        fallback = "fork-join-executor"
      }

      # This will be used if you have set "executor = "affinity-pool-executor""
      # Underlying thread pool implementation is akka.dispatch.affinity.AffinityPool.
      # This executor is classified as "ApiMayChange".
      affinity-pool-executor {
        # Min number of threads to cap factor-based parallelism number to
        parallelism-min = 4

        # The parallelism factor is used to determine thread pool size using the
        # following formula: ceil(available processors * factor). Resulting size
        # is then bounded by the parallelism-min and parallelism-max values.
        parallelism-factor = 0.8

        # Max number of threads to cap factor-based parallelism number to.
        parallelism-max = 64

        # Each worker in the pool uses a separate bounded MPSC queue. This value
        # indicates the upper bound of the queue. Whenever an attempt to enqueue
        # a task is made and the queue does not have capacity to accommodate
        # the task, the rejection handler created by the rejection handler specified
        # in "rejection-handler" is invoked.
        task-queue-size = 512

        # FQCN of the Rejection handler used in the pool.
        # Must have an empty public constructor and must
        # implement akka.actor.affinity.RejectionHandlerFactory.
        rejection-handler = "akka.dispatch.affinity.ThrowOnOverflowRejectionHandler"

        # Level of CPU time used, on a scale between 1 and 10, during backoff/idle.
        # The tradeoff is that to have low latency more CPU time must be used to be
        # able to react quickly on incoming messages or send as fast as possible after
        # backoff backpressure.
        # Level 1 strongly prefer low CPU consumption over low latency.
        # Level 10 strongly prefer low latency over low CPU consumption.
        idle-cpu-level = 5

        # FQCN of the akka.dispatch.affinity.QueueSelectorFactory.
        # The Class of the FQCN must have a public constructor with a
        # (com.typesafe.config.Config) parameter.
        # A QueueSelectorFactory create instances of akka.dispatch.affinity.QueueSelector,
        # that is responsible for determining which task queue a Runnable should be enqueued in.
        queue-selector = "akka.dispatch.affinity.FairDistributionHashCache"

        # When using the "akka.dispatch.affinity.FairDistributionHashCache" queue selector
        # internally the AffinityPool uses two methods to determine which task
        # queue to allocate a Runnable to:
        # - map based - maintains a round robin counter and a map of Runnable
        # hashcodes to queues that they have been associated with. This ensures
        # maximum fairness in terms of work distribution, meaning that each worker
        # will get approximately equal amount of mailboxes to execute. This is suitable
        # in cases where we have a small number of actors that will be scheduled on
        # the pool and we want to ensure the maximum possible utilization of the
        # available threads.
        # - hash based - the task - queue in which the runnable should go is determined
        # by using an uniformly distributed int to int hash function which uses the
        # hash code of the Runnable as an input. This is preferred in situations where we
        # have enough number of distinct actors to ensure statistically uniform
        # distribution of work across threads or we are ready to sacrifice the
        # former for the added benefit of avoiding map look-ups.
        fair-work-distribution {
          # The value serves as a threshold which determines the point at which the
          # pool switches from the first to the second work distribution schemes.
          # For example, if the value is set to 128, the pool can observe up to
          # 128 unique actors and schedule their mailboxes using the map based
          # approach. Once this number is reached the pool switches to hash based
          # task distribution mode. If the value is set to 0, the map based
          # work distribution approach is disabled and only the hash based is
          # used irrespective of the number of unique actors. Valid range is
          # 0 to 2048 (inclusive)
          threshold = 128
        }
      }

      # This will be used if you have set "executor = "fork-join-executor""
      # Underlying thread pool implementation is java.util.concurrent.ForkJoinPool
      fork-join-executor {
        # Min number of threads to cap factor-based parallelism number to
        parallelism-min = 8

        # The parallelism factor is used to determine thread pool size using the
        # following formula: ceil(available processors * factor). Resulting size
        # is then bounded by the parallelism-min and parallelism-max values.
        parallelism-factor = 1.0

        # Max number of threads to cap factor-based parallelism number to
        parallelism-max = 64

        # Setting to "FIFO" to use queue like peeking mode which "poll" or "LIFO" to use stack
        # like peeking mode which "pop".
        task-peeking-mode = "FIFO"
      }

      # This will be used if you have set "executor = "thread-pool-executor""
      # Underlying thread pool implementation is java.util.concurrent.ThreadPoolExecutor
      thread-pool-executor {
        # Keep alive time for threads
        keep-alive-time = 60s

        # Define a fixed thread pool size with this property. The corePoolSize
        # and the maximumPoolSize of the ThreadPoolExecutor will be set to this
        # value, if it is defined. Then the other pool-size properties will not
        # be used.
        #
        # Valid values are: `off` or a positive integer.
        fixed-pool-size = off

        # Min number of threads to cap factor-based corePoolSize number to
        core-pool-size-min = 8

        # The core-pool-size-factor is used to determine corePoolSize of the
        # ThreadPoolExecutor using the following formula:
        # ceil(available processors * factor).
        # Resulting size is then bounded by the core-pool-size-min and
        # core-pool-size-max values.
        core-pool-size-factor = 3.0

        # Max number of threads to cap factor-based corePoolSize number to
        core-pool-size-max = 64

        # Minimum number of threads to cap factor-based maximumPoolSize number to
        max-pool-size-min = 8

        # The max-pool-size-factor is used to determine maximumPoolSize of the
        # ThreadPoolExecutor using the following formula:
        # ceil(available processors * factor)
        # The maximumPoolSize will not be less than corePoolSize.
        # It is only used if using a bounded task queue.
        max-pool-size-factor  = 3.0

        # Max number of threads to cap factor-based maximumPoolSize number to
        max-pool-size-max = 64

        # Specifies the bounded capacity of the task queue (< 1 == unbounded)
        task-queue-size = -1

        # Specifies which type of task queue will be used, can be "array" or
        # "linked" (default)
        task-queue-type = "linked"

        # Allow core threads to time out
        allow-core-timeout = on
      }

      # How long time the dispatcher will wait for new actors until it shuts down
      shutdown-timeout = 1s

      # Throughput defines the number of messages that are processed in a batch
      # before the thread is returned to the pool. Set to 1 for as fair as possible.
      throughput = 5

      # Throughput deadline for Dispatcher, set to 0 or negative for no deadline
      throughput-deadline-time = 0ms

      # For BalancingDispatcher: If the balancing dispatcher should attempt to
      # schedule idle actors using the same dispatcher when a message comes in,
      # and the dispatchers ExecutorService is not fully busy already.
      attempt-teamwork = on

      # If this dispatcher requires a specific type of mailbox, specify the
      # fully-qualified class name here; the actually created mailbox will
      # be a subtype of this type. The empty string signifies no requirement.
      mailbox-requirement = ""
    }

    # Default separate internal dispatcher to run Akka internal tasks and actors on
    # protecting them against starvation because of accidental blocking in user actors (which run on the
    # default dispatcher)
    internal-dispatcher {
      type = "Dispatcher"
      executor = "fork-join-executor"
      throughput = 5
      fork-join-executor {
        parallelism-min = 4
        parallelism-factor = 1.0
        parallelism-max = 64
      }
    }

    default-blocking-io-dispatcher {
      type = "Dispatcher"
      executor = "thread-pool-executor"
      throughput = 1

      thread-pool-executor {
        fixed-pool-size = 16
      }
    }

    default-mailbox {
      # FQCN of the MailboxType. The Class of the FQCN must have a public
      # constructor with
      # (akka.actor.ActorSystem.Settings, com.typesafe.config.Config) parameters.
      mailbox-type = "akka.dispatch.UnboundedMailbox"

      # If the mailbox is bounded then it uses this setting to determine its
      # capacity. The provided value must be positive.
      # NOTICE:
      # Up to version 2.1 the mailbox type was determined based on this setting;
      # this is no longer the case, the type must explicitly be a bounded mailbox.
      mailbox-capacity = 1000

      # If the mailbox is bounded then this is the timeout for enqueueing
      # in case the mailbox is full. Negative values signify infinite
      # timeout, which should be avoided as it bears the risk of dead-lock.
      mailbox-push-timeout-time = 10s

      # For Actor with Stash: The default capacity of the stash.
      # If negative (or zero) then an unbounded stash is used (default)
      # If positive then a bounded stash is used and the capacity is set using
      # the property
      stash-capacity = -1
    }

    mailbox {
      # Mapping between message queue semantics and mailbox configurations.
      # Used by akka.dispatch.RequiresMessageQueue[T] to enforce different
      # mailbox types on actors.
      # If your Actor implements RequiresMessageQueue[T], then when you create
      # an instance of that actor its mailbox type will be decided by looking
      # up a mailbox configuration via T in this mapping
      requirements {
        "akka.dispatch.UnboundedMessageQueueSemantics" =
          akka.actor.mailbox.unbounded-queue-based
        "akka.dispatch.BoundedMessageQueueSemantics" =
          akka.actor.mailbox.bounded-queue-based
        "akka.dispatch.DequeBasedMessageQueueSemantics" =
          akka.actor.mailbox.unbounded-deque-based
        "akka.dispatch.UnboundedDequeBasedMessageQueueSemantics" =
          akka.actor.mailbox.unbounded-deque-based
        "akka.dispatch.BoundedDequeBasedMessageQueueSemantics" =
          akka.actor.mailbox.bounded-deque-based
        "akka.dispatch.MultipleConsumerSemantics" =
          akka.actor.mailbox.unbounded-queue-based
        "akka.dispatch.ControlAwareMessageQueueSemantics" =
          akka.actor.mailbox.unbounded-control-aware-queue-based
        "akka.dispatch.UnboundedControlAwareMessageQueueSemantics" =
          akka.actor.mailbox.unbounded-control-aware-queue-based
        "akka.dispatch.BoundedControlAwareMessageQueueSemantics" =
          akka.actor.mailbox.bounded-control-aware-queue-based
        "akka.event.LoggerMessageQueueSemantics" =
          akka.actor.mailbox.logger-queue
      }

      unbounded-queue-based {
        # FQCN of the MailboxType, The Class of the FQCN must have a public
        # constructor with (akka.actor.ActorSystem.Settings,
        # com.typesafe.config.Config) parameters.
        mailbox-type = "akka.dispatch.UnboundedMailbox"
      }

      bounded-queue-based {
        # FQCN of the MailboxType, The Class of the FQCN must have a public
        # constructor with (akka.actor.ActorSystem.Settings,
        # com.typesafe.config.Config) parameters.
        mailbox-type = "akka.dispatch.BoundedMailbox"
      }

      unbounded-deque-based {
        # FQCN of the MailboxType, The Class of the FQCN must have a public
        # constructor with (akka.actor.ActorSystem.Settings,
        # com.typesafe.config.Config) parameters.
        mailbox-type = "akka.dispatch.UnboundedDequeBasedMailbox"
      }

      bounded-deque-based {
        # FQCN of the MailboxType, The Class of the FQCN must have a public
        # constructor with (akka.actor.ActorSystem.Settings,
        # com.typesafe.config.Config) parameters.
        mailbox-type = "akka.dispatch.BoundedDequeBasedMailbox"
      }

      unbounded-control-aware-queue-based {
        # FQCN of the MailboxType, The Class of the FQCN must have a public
        # constructor with (akka.actor.ActorSystem.Settings,
        # com.typesafe.config.Config) parameters.
        mailbox-type = "akka.dispatch.UnboundedControlAwareMailbox"
      }

      bounded-control-aware-queue-based {
        # FQCN of the MailboxType, The Class of the FQCN must have a public
        # constructor with (akka.actor.ActorSystem.Settings,
        # com.typesafe.config.Config) parameters.
        mailbox-type = "akka.dispatch.BoundedControlAwareMailbox"
      }

      # The LoggerMailbox will drain all messages in the mailbox
      # when the system is shutdown and deliver them to the StandardOutLogger.
      # Do not change this unless you know what you are doing.
      logger-queue {
        mailbox-type = "akka.event.LoggerMailboxType"
      }
    }

    debug {
      # enable function of Actor.loggable(), which is to log any received message
      # at DEBUG level, see the “Testing Actor Systems” section of the Akka
      # Documentation at https://akka.io/docs
      receive = off

      # enable DEBUG logging of all AutoReceiveMessages (Kill, PoisonPill etc.)
      autoreceive = off

      # enable DEBUG logging of actor lifecycle changes
      lifecycle = off

      # enable DEBUG logging of all LoggingFSMs for events, transitions and timers
      fsm = off

      # enable DEBUG logging of subscription changes on the eventStream
      event-stream = off

      # enable DEBUG logging of unhandled messages
      unhandled = off

      # enable WARN logging of misconfigured routers
      router-misconfiguration = off
    }

    # SECURITY BEST-PRACTICE is to disable java serialization for its multiple
    # known attack surfaces.
    #
    # This setting is a short-cut to
    # - using DisabledJavaSerializer instead of JavaSerializer
    #
    # Completely disable the use of `akka.serialization.JavaSerialization` by the
    # Akka Serialization extension, instead DisabledJavaSerializer will
    # be inserted which will fail explicitly if attempts to use java serialization are made.
    #
    # The log messages emitted by such serializer SHOULD be treated as potential
    # attacks which the serializer prevented, as they MAY indicate an external operator
    # attempting to send malicious messages intending to use java serialization as attack vector.
    # The attempts are logged with the SECURITY marker.
    #
    # Please note that this option does not stop you from manually invoking java serialization
    #
    allow-java-serialization = off

    # Log warnings when the Java serialization is used to serialize messages.
    # Java serialization is not very performant and should not be used in production
    # environments unless you don't care about performance and security. In that case
    # you can turn this off.
    warn-about-java-serializer-usage = on

    # To be used with the above warn-about-java-serializer-usage
    # When warn-about-java-serializer-usage = on, and this warn-on-no-serialization-verification = off,
    # warnings are suppressed for classes extending NoSerializationVerificationNeeded
    # to reduce noise.
    warn-on-no-serialization-verification = on

    # Entries for pluggable serializers and their bindings.
    serializers {
      java = "akka.serialization.JavaSerializer"
      bytes = "akka.serialization.ByteArraySerializer"
      primitive-long = "akka.serialization.LongSerializer"
      primitive-int = "akka.serialization.IntSerializer"
      primitive-string = "akka.serialization.StringSerializer"
      primitive-bytestring = "akka.serialization.ByteStringSerializer"
      primitive-boolean = "akka.serialization.BooleanSerializer"
    }

    # Class to Serializer binding. You only need to specify the name of an
    # interface or abstract base class of the messages. In case of ambiguity it
    # is using the most specific configured class, or giving a warning and
    # choosing the “first” one.
    #
    # To disable one of the default serializers, assign its class to "none", like
    # "java.io.Serializable" = none
    serialization-bindings {
      "[B" = bytes
      "java.io.Serializable" = java

      "java.lang.String" = primitive-string
      "akka.util.ByteString$ByteString1C" = primitive-bytestring
      "akka.util.ByteString$ByteString1" = primitive-bytestring
      "akka.util.ByteString$ByteStrings" = primitive-bytestring
      "java.lang.Long" = primitive-long
      "scala.Long" = primitive-long
      "java.lang.Integer" = primitive-int
      "scala.Int" = primitive-int
      "java.lang.Boolean" = primitive-boolean
      "scala.Boolean" = primitive-boolean
    }

    # Configuration namespace of serialization identifiers.
    # Each serializer implementation must have an entry in the following format:
    # `akka.actor.serialization-identifiers."FQCN" = ID`
    # where `FQCN` is fully qualified class name of the serializer implementation
    # and `ID` is globally unique serializer identifier number.
    # Identifier values from 0 to 40 are reserved for Akka internal usage.
    serialization-identifiers {
      "akka.serialization.JavaSerializer" = 1
      "akka.serialization.ByteArraySerializer" = 4

      primitive-long = 18
      primitive-int = 19
      primitive-string = 20
      primitive-bytestring = 21
      primitive-boolean = 35
    }

  }

  serialization.protobuf {
    # deprecated, use `allowed-classes` instead
    whitelist-class = [
      "com.google.protobuf.GeneratedMessage",
      "com.google.protobuf.GeneratedMessageV3",
      "scalapb.GeneratedMessageCompanion",
      "akka.protobufv3.internal.GeneratedMessageV3"
    ]

    # Additional classes that are allowed even if they are not defined in `serialization-bindings`.
    # It can be exact class name or name of super class or interfaces (one level).
    # This is useful when a class is not used for serialization any more and therefore removed
    # from `serialization-bindings`, but should still be possible to deserialize.
    allowed-classes = ${akka.serialization.protobuf.whitelist-class}

  }

  # Used to set the behavior of the scheduler.
  # Changing the default values may change the system behavior drastically so make
  # sure you know what you're doing! See the Scheduler section of the Akka
  # Documentation for more details.
  scheduler {
    # The LightArrayRevolverScheduler is used as the default scheduler in the
    # system. It does not execute the scheduled tasks on exact time, but on every
    # tick, it will run everything that is (over)due. You can increase or decrease
    # the accuracy of the execution timing by specifying smaller or larger tick
    # duration. If you are scheduling a lot of tasks you should consider increasing
    # the ticks per wheel.
    # Note that it might take up to 1 tick to stop the Timer, so setting the
    # tick-duration to a high value will make shutting down the actor system
    # take longer.
    tick-duration = 10ms

    # The timer uses a circular wheel of buckets to store the timer tasks.
    # This should be set such that the majority of scheduled timeouts (for high
    # scheduling frequency) will be shorter than one rotation of the wheel
    # (ticks-per-wheel * ticks-duration)
    # THIS MUST BE A POWER OF TWO!
    ticks-per-wheel = 512

    # This setting selects the timer implementation which shall be loaded at
    # system start-up.
    # The class given here must implement the akka.actor.Scheduler interface
    # and offer a public constructor which takes three arguments:
    #  1) com.typesafe.config.Config
    #  2) akka.event.LoggingAdapter
    #  3) java.util.concurrent.ThreadFactory
    implementation = akka.actor.LightArrayRevolverScheduler

    # When shutting down the scheduler, there will typically be a thread which
    # needs to be stopped, and this timeout determines how long to wait for
    # that to happen. In case of timeout the shutdown of the actor system will
    # proceed without running possibly still enqueued tasks.
    shutdown-timeout = 5s
  }

  # How frequent the clock for recency-based strategies is updated. Can be set to 0 for usage of
  # `System.nanoTime` for each call but that might have some overhead for high message throughput.
  scheduled-clock-interval = 1 s

  io {

    # By default the select loops run on dedicated threads, hence using a
    # PinnedDispatcher
    pinned-dispatcher {
      type = "PinnedDispatcher"
      executor = "thread-pool-executor"
      thread-pool-executor.allow-core-timeout = off
    }

    tcp {

      # The number of selectors to stripe the served channels over; each of
      # these will use one select loop on the selector-dispatcher.
      nr-of-selectors = 1

      # Maximum number of open channels supported by this TCP module; there is
      # no intrinsic general limit, this setting is meant to enable DoS
      # protection by limiting the number of concurrently connected clients.
      # Also note that this is a "soft" limit; in certain cases the implementation
      # will accept a few connections more or a few less than the number configured
      # here. Must be an integer > 0 or "unlimited".
      max-channels = 256000

      # When trying to assign a new connection to a selector and the chosen
      # selector is at full capacity, retry selector choosing and assignment
      # this many times before giving up
      selector-association-retries = 10

      # The maximum number of connection that are accepted in one go,
      # higher numbers decrease latency, lower numbers increase fairness on
      # the worker-dispatcher
      batch-accept-limit = 10

      # The number of bytes per direct buffer in the pool used to read or write
      # network data from the kernel.
      direct-buffer-size = 128 KiB

      # The maximal number of direct buffers kept in the direct buffer pool for
      # reuse.
      direct-buffer-pool-limit = 1000

      # The duration a connection actor waits for a `Register` message from
      # its commander before aborting the connection.
      register-timeout = 5s

      # The maximum number of bytes delivered by a `Received` message. Before
      # more data is read from the network the connection actor will try to
      # do other work.
      # The purpose of this setting is to impose a smaller limit than the
      # configured receive buffer size. When using value 'unlimited' it will
      # try to read all from the receive buffer.
      max-received-message-size = unlimited

      # Enable fine grained logging of what goes on inside the implementation.
      # Be aware that this may log more than once per message sent to the actors
      # of the tcp implementation.
      trace-logging = off

      # Fully qualified config path which holds the dispatcher configuration
      # to be used for running the select() calls in the selectors
      selector-dispatcher = "akka.io.pinned-dispatcher"

      # Fully qualified config path which holds the dispatcher configuration
      # for the read/write worker actors
      worker-dispatcher = "akka.actor.internal-dispatcher"

      # Fully qualified config path which holds the dispatcher configuration
      # for the selector management actors
      management-dispatcher = "akka.actor.internal-dispatcher"

      # Fully qualified config path which holds the dispatcher configuration
      # on which file IO tasks are scheduled
      file-io-dispatcher = "akka.actor.default-blocking-io-dispatcher"

      # The maximum number of bytes (or "unlimited") to transfer in one batch
      # when using `WriteFile` command which uses `FileChannel.transferTo` to
      # pipe files to a TCP socket. On some OS like Linux `FileChannel.transferTo`
      # may block for a long time when network IO is faster than file IO.
      # Decreasing the value may improve fairness while increasing may improve
      # throughput.
      file-io-transferTo-limit = 512 KiB

      # The number of times to retry the `finishConnect` call after being notified about
      # OP_CONNECT. Retries are needed if the OP_CONNECT notification doesn't imply that
      # `finishConnect` will succeed, which is the case on Android.
      finish-connect-retries = 5

      # On Windows connection aborts are not reliably detected unless an OP_READ is
      # registered on the selector _after_ the connection has been reset. This
      # workaround enables an OP_CONNECT which forces the abort to be visible on Windows.
      # Enabling this setting on other platforms than Windows will cause various failures
      # and undefined behavior.
      # Possible values of this key are on, off and auto where auto will enable the
      # workaround if Windows is detected automatically.
      windows-connection-abort-workaround-enabled = off
    }

    udp {

      # The number of selectors to stripe the served channels over; each of
      # these will use one select loop on the selector-dispatcher.
      nr-of-selectors = 1

      # Maximum number of open channels supported by this UDP module Generally
      # UDP does not require a large number of channels, therefore it is
      # recommended to keep this setting low.
      max-channels = 4096

      # The select loop can be used in two modes:
      # - setting "infinite" will select without a timeout, hogging a thread
      # - setting a positive timeout will do a bounded select call,
      #   enabling sharing of a single thread between multiple selectors
      #   (in this case you will have to use a different configuration for the
      #   selector-dispatcher, e.g. using "type=Dispatcher" with size 1)
      # - setting it to zero means polling, i.e. calling selectNow()
      select-timeout = infinite

      # When trying to assign a new connection to a selector and the chosen
      # selector is at full capacity, retry selector choosing and assignment
      # this many times before giving up
      selector-association-retries = 10

      # The maximum number of datagrams that are read in one go,
      # higher numbers decrease latency, lower numbers increase fairness on
      # the worker-dispatcher
      receive-throughput = 3

      # The number of bytes per direct buffer in the pool used to read or write
      # network data from the kernel.
      direct-buffer-size = 128 KiB

      # The maximal number of direct buffers kept in the direct buffer pool for
      # reuse.
      direct-buffer-pool-limit = 1000

      # Enable fine grained logging of what goes on inside the implementation.
      # Be aware that this may log more than once per message sent to the actors
      # of the tcp implementation.
      trace-logging = off

      # Fully qualified config path which holds the dispatcher configuration
      # to be used for running the select() calls in the selectors
      selector-dispatcher = "akka.io.pinned-dispatcher"

      # Fully qualified config path which holds the dispatcher configuration
      # for the read/write worker actors
      worker-dispatcher = "akka.actor.internal-dispatcher"

      # Fully qualified config path which holds the dispatcher configuration
      # for the selector management actors
      management-dispatcher = "akka.actor.internal-dispatcher"
    }

    udp-connected {

      # The number of selectors to stripe the served channels over; each of
      # these will use one select loop on the selector-dispatcher.
      nr-of-selectors = 1

      # Maximum number of open channels supported by this UDP module Generally
      # UDP does not require a large number of channels, therefore it is
      # recommended to keep this setting low.
      max-channels = 4096

      # The select loop can be used in two modes:
      # - setting "infinite" will select without a timeout, hogging a thread
      # - setting a positive timeout will do a bounded select call,
      #   enabling sharing of a single thread between multiple selectors
      #   (in this case you will have to use a different configuration for the
      #   selector-dispatcher, e.g. using "type=Dispatcher" with size 1)
      # - setting it to zero means polling, i.e. calling selectNow()
      select-timeout = infinite

      # When trying to assign a new connection to a selector and the chosen
      # selector is at full capacity, retry selector choosing and assignment
      # this many times before giving up
      selector-association-retries = 10

      # The maximum number of datagrams that are read in one go,
      # higher numbers decrease latency, lower numbers increase fairness on
      # the worker-dispatcher
      receive-throughput = 3

      # The number of bytes per direct buffer in the pool used to read or write
      # network data from the kernel.
      direct-buffer-size = 128 KiB

      # The maximal number of direct buffers kept in the direct buffer pool for
      # reuse.
      direct-buffer-pool-limit = 1000

      # Enable fine grained logging of what goes on inside the implementation.
      # Be aware that this may log more than once per message sent to the actors
      # of the tcp implementation.
      trace-logging = off

      # Fully qualified config path which holds the dispatcher configuration
      # to be used for running the select() calls in the selectors
      selector-dispatcher = "akka.io.pinned-dispatcher"

      # Fully qualified config path which holds the dispatcher configuration
      # for the read/write worker actors
      worker-dispatcher = "akka.actor.internal-dispatcher"

      # Fully qualified config path which holds the dispatcher configuration
      # for the selector management actors
      management-dispatcher = "akka.actor.internal-dispatcher"
    }

    dns {
      # Fully qualified config path which holds the dispatcher configuration
      # for the manager and resolver router actors.
      # For actual router configuration see akka.actor.deployment./IO-DNS/*
      dispatcher = "akka.actor.internal-dispatcher"

      # Name of the subconfig at path akka.io.dns, see inet-address below
      #
      # Change to `async-dns` to use the new "native" DNS resolver,
      # which is also capable of resolving SRV records.
      resolver = "inet-address"

      # To-be-deprecated DNS resolver implementation which uses the Java InetAddress to resolve DNS records.
      # To be replaced by `akka.io.dns.async` which implements the DNS protocol natively and without blocking (which InetAddress does)
      inet-address {
        # Must implement akka.io.DnsProvider
        provider-object = "akka.io.InetAddressDnsProvider"

        # To set the time to cache name resolutions
        # Possible values:
        # default: sun.net.InetAddressCachePolicy.get() and getNegative()
        # forever: cache forever
        # never: no caching
        # n [time unit]: positive timeout with unit, for example 30s
        positive-ttl = default
        negative-ttl = default

        # How often to sweep out expired cache entries.
        # Note that this interval has nothing to do with TTLs
        cache-cleanup-interval = 120s
      }

      async-dns {
        provider-object = "akka.io.dns.internal.AsyncDnsProvider"

        # Set upper bound for caching successfully resolved dns entries
        # if the DNS record has a smaller TTL value than the setting that
        # will be used. Default is to use the record TTL with no cap.
        # Possible values:
        # forever: always use the minimum TTL from the found records
        # never: never cache
        # n [time unit] = cap the caching to this value
        positive-ttl = forever

        # Set how long the fact that a DNS record could not be found is
        # cached. If a new resolution is done while the fact is cached it will
        # be failed and not result in an actual DNS resolution. Default is
        # to never cache.
        # Possible values:
        # never: never cache
        # forever: cache a missing DNS record forever (you probably will not want to do this)
        # n [time unit] = cache for this long
        negative-ttl = never

        # Configures nameservers to query during DNS resolution.
        # Defaults to the nameservers that would be used by the JVM by default.
        # Set to a list of IPs to override the servers, e.g. [ "8.8.8.8", "8.8.4.4" ] for Google's servers
        # If multiple are defined then they are tried in order until one responds
        nameservers = default

        # The time that a request is allowed to live before being discarded
        # given no reply. The lower bound of this should always be the amount
        # of time to reasonably expect a DNS server to reply within.
        # If multiple name servers are provided then each gets this long to response before trying
        # the next one
        resolve-timeout = 5s

        # How often to sweep out expired cache entries.
        # Note that this interval has nothing to do with TTLs
        cache-cleanup-interval = 120s

        # Configures the list of search domains.
        # Defaults to a system dependent lookup (on Unix like OSes, will attempt to parse /etc/resolv.conf, on
        # other platforms, will not make any attempt to lookup the search domains). Set to a single domain, or
        # a list of domains, eg, [ "example.com", "example.net" ].
        search-domains = default

        # Any hosts that have a number of dots less than this will not be looked up directly, instead, a search on
        # the search domains will be tried first. This corresponds to the ndots option in /etc/resolv.conf, see
        # https://linux.die.net/man/5/resolver for more info.
        # Defaults to a system dependent lookup (on Unix like OSes, will attempt to parse /etc/resolv.conf, on
        # other platforms, will default to 1).
        ndots = default

        # Which SecureRandom algorithm to use for generating DNS request IDs.  The default "" or "SecureRandom"
        # is likely sufficient, but you may supply an alternative algorithm, in which case resolution will
        # proceed as in `SecureRandom.getInstance()`
        id-strategy = ""
      }
    }
  }


  # CoordinatedShutdown is an extension that will perform registered
  # tasks in the order that is defined by the phases. It is started
  # by calling CoordinatedShutdown(system).run(). This can be triggered
  # by different things, for example:
  # - JVM shutdown hook will by default run CoordinatedShutdown
  # - Cluster node will automatically run CoordinatedShutdown when it
  #   sees itself as Exiting
  # - A management console or other application specific command can
  #   run CoordinatedShutdown
  coordinated-shutdown {
    # The timeout that will be used for a phase if not specified with
    # 'timeout' in the phase
    default-phase-timeout = 5 s

    # Terminate the ActorSystem in the last phase actor-system-terminate.
    terminate-actor-system = on

    # Exit the JVM (System.exit(0)) in the last phase actor-system-terminate
    # if this is set to 'on'. It is done after termination of the
    # ActorSystem if terminate-actor-system=on, otherwise it is done
    # immediately when the last phase is reached.
    exit-jvm = off

    # Exit status to use on System.exit(int) when 'exit-jvm' is 'on'.
    exit-code = 0

    # Run the coordinated shutdown when the JVM process exits, e.g.
    # via kill SIGTERM signal (SIGINT ctrl-c doesn't work).
    # This property is related to `akka.jvm-shutdown-hooks` above.
    run-by-jvm-shutdown-hook = on

    # Run the coordinated shutdown when ActorSystem.terminate is called.
    # Enabling this and disabling terminate-actor-system is not a supported
    # combination (will throw ConfigurationException at startup).
    run-by-actor-system-terminate = on

    # When Coordinated Shutdown is triggered an instance of `Reason` is
    # required. That value can be used to override the default settings.
    # Only 'exit-jvm', 'exit-code' and 'terminate-actor-system' may be
    # overridden depending on the reason.
    reason-overrides {
      # Overrides are applied using the `reason.getClass.getName`.
      # Overrides the `exit-code` when the `Reason` is a cluster
      # Downing or a Cluster Join Unsuccessful event
      "akka.actor.CoordinatedShutdown$ClusterDowningReason$" {
        exit-code = -1
      }
      "akka.actor.CoordinatedShutdown$ClusterJoinUnsuccessfulReason$" {
        exit-code = -1
      }
    }

    #//#coordinated-shutdown-phases
    # CoordinatedShutdown is enabled by default and will run the tasks that
    # are added to these phases by individual Akka modules and user logic.
    #
    # The phases are ordered as a DAG by defining the dependencies between the phases
    # to make sure shutdown tasks are run in the right order.
    #
    # In general user tasks belong in the first few phases, but there may be use
    # cases where you would want to hook in new phases or register tasks later in
    # the DAG.
    #
    # Each phase is defined as a named config section with the
    # following optional properties:
    # - timeout=15s: Override the default-phase-timeout for this phase.
    # - recover=off: If the phase fails the shutdown is aborted
    #                and depending phases will not be executed.
    # - enabled=off: Skip all tasks registered in this phase. DO NOT use
    #                this to disable phases unless you are absolutely sure what the
    #                consequences are. Many of the built in tasks depend on other tasks
    #                having been executed in earlier phases and may break if those are disabled.
    # depends-on=[]: Run the phase after the given phases
    phases {

      # The first pre-defined phase that applications can add tasks to.
      # Note that more phases can be added in the application's
      # configuration by overriding this phase with an additional
      # depends-on.
      before-service-unbind {
      }

      # Stop accepting new incoming connections.
      # This is where you can register tasks that makes a server stop accepting new connections. Already
      # established connections should be allowed to continue and complete if possible.
      service-unbind {
        depends-on = [before-service-unbind]
      }

      # Wait for requests that are in progress to be completed.
      # This is where you register tasks that will wait for already established connections to complete, potentially
      # also first telling them that it is time to close down.
      service-requests-done {
        depends-on = [service-unbind]
      }

      # Final shutdown of service endpoints.
      # This is where you would add tasks that forcefully kill connections that are still around.
      service-stop {
        depends-on = [service-requests-done]
      }

      # Phase for custom application tasks that are to be run
      # after service shutdown and before cluster shutdown.
      before-cluster-shutdown {
        depends-on = [service-stop]
      }

      # Graceful shutdown of the Cluster Sharding regions.
      # This phase is not meant for users to add tasks to.
      cluster-sharding-shutdown-region {
        timeout = 10 s
        depends-on = [before-cluster-shutdown]
      }

      # Emit the leave command for the node that is shutting down.
      # This phase is not meant for users to add tasks to.
      cluster-leave {
        depends-on = [cluster-sharding-shutdown-region]
      }

      # Shutdown cluster singletons
      # This is done as late as possible to allow the shard region shutdown triggered in
      # the "cluster-sharding-shutdown-region" phase to complete before the shard coordinator is shut down.
      # This phase is not meant for users to add tasks to.
      cluster-exiting {
        timeout = 10 s
        depends-on = [cluster-leave]
      }

      # Wait until exiting has been completed
      # This phase is not meant for users to add tasks to.
      cluster-exiting-done {
        depends-on = [cluster-exiting]
      }

      # Shutdown the cluster extension
      # This phase is not meant for users to add tasks to.
      cluster-shutdown {
        depends-on = [cluster-exiting-done]
      }

      # Phase for custom application tasks that are to be run
      # after cluster shutdown and before ActorSystem termination.
      before-actor-system-terminate {
        depends-on = [cluster-shutdown]
      }

      # Last phase. See terminate-actor-system and exit-jvm above.
      # Don't add phases that depends on this phase because the
      # dispatcher and scheduler of the ActorSystem have been shutdown.
      # This phase is not meant for users to add tasks to.
      actor-system-terminate {
        timeout = 10 s
        depends-on = [before-actor-system-terminate]
      }
    }
    #//#coordinated-shutdown-phases
  }

  #//#circuit-breaker-default
  # Configuration for circuit breakers created with the APIs accepting an id to
  # identify or look up the circuit breaker.
  # Note: Circuit breakers created without ids are not affected by this configuration.
  # A child configuration section with the same name as the circuit breaker identifier
  # will be used, with fallback to the `akka.circuit-breaker.default` section.
  circuit-breaker {

    # Default configuration that is used if a configuration section
    # with the circuit breaker identifier is not defined.
    default {
      # Number of failures before opening the circuit.
      max-failures = 10

      # Duration of time after which to consider a call a failure.
      call-timeout = 10s

      # Duration of time in open state after which to attempt to close
      # the circuit, by first entering the half-open state.
      reset-timeout = 15s

      # The upper bound of reset-timeout
      max-reset-timeout = 36500d

      # Exponential backoff
      # For details see https://en.wikipedia.org/wiki/Exponential_backoff
      exponential-backoff = 1.0

      # Additional random delay based on this factor is added to backoff
      # For example 0.2 adds up to 20% delay
      # In order to skip this additional delay set as 0
      random-factor = 0.0

      # A allowlist of fqcn of Exceptions that the CircuitBreaker
      # should not consider failures. By default all exceptions are
      # considered failures.
      exception-allowlist = []
    }
  }
  #//#circuit-breaker-default

}