1.1.2 First layer thickness doesn't affect infill #2042

Closed
Bevaz opened this Issue May 17, 2014 · 1 comment

Projects

None yet

2 participants

@Bevaz
Bevaz commented May 17, 2014

I have set option "First Layer" to 200%. In Slicer 1.1.2 it works only for perimeter. Infill is look like the trusion widthth is 100%. I have tried the same settings in Slic3r 1.0.1 and it worked fine. This bug is not specific to the model. Win7-x64

Slic3r 1.0.1 - stable
imageSlic3r3r 1.1 - experimentalal
image

generated by Slic3r 1.1.2 on Sat May 17 16:50:58 2014

avoid_crossing_perimeters = 1
bed_size = 150,150
bed_temperature = 0
bottom_solid_layers = 3
bridge_acceleration = 750
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 10
brim_width = 0
complete_objects = 0
cooling = 1
default_acceleration = 750
disable_fan_first_layers = 1
dont_support_bridges = 1
duplicate_distance = 6
end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors
external_perimeter_speed = 50%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1.25
extrusion_width = 0
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 1.7
fill_angle = 45
fill_density = 30%
fill_pattern = honeycomb
first_layer_acceleration = 750
first_layer_bed_temperature = 0
first_layer_extrusion_width = 200%
first_layer_height = 0.4
first_layer_speed = 6
first_layer_temperature = 245
g0 = 0
gap_fill_speed = 20
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 750
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 40
interface_shells = 0
layer_gcode =
layer_height = 0.2
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 6
min_skirt_length = 0
notes =
nozzle_diameter = 0.4
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 750
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 20
perimeters = 3
post_process =
print_center = 75,75
raft_layers = 0
randomize_start = 1
resolution = 0
retract_before_travel = 2
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0.5
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
skirt_distance = 6
skirt_height = 1
skirts = 0
slowdown_below_layer_time = 30
small_perimeter_speed = 6
solid_fill_pattern = rectilinear
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 100%
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = M203 Z3.5\nG28 ; home all axes\nG1 Z5 F210 ; lift nozzle
start_perimeters_at_concave_points = 0
start_perimeters_at_non_overhang = 1
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 30
support_material_threshold = 30
temperature = 240
thin_walls = 1
threads = 2
toolchange_gcode =
top_infill_extrusion_width = 0
top_solid_infill_speed = 80%
top_solid_layers = 3
travel_speed = 100
use_firmware_retraction = 0
use_relative_e_distances = 0
vibration_limit = 0
wipe = 0
z_offset = -0.4

@alexrj
Owner
alexrj commented May 18, 2014

Thank you! Fixed and added regression test..

@alexrj alexrj closed this May 18, 2014
@alexrj alexrj added this to the 1.1.3 milestone May 18, 2014
@alexrj alexrj added the Fixed label May 18, 2014
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment