0.9.5 - archimedeanchords infill does not work or works incorrectly #806

Closed
ulisses31 opened this Issue Nov 18, 2012 · 9 comments

Projects

None yet

3 participants

@ulisses31

This happened while trying to print
http://www.thingiverse.com/thing:29006
It's a buddha - I removed the bottom 2 mm of it to make if more horizontal in the bottom.
I'm using a concentric top/bottom fill pattern.
3 Perimeters,
4 solid layers (top and bottom) on the horizontal shells section.
Layer height 0.4 (including first layer height)
Nozzle diameter: 0.5
with this configuration it didn't print the infill at all.
With a slightly diferent configuration it did print but with less material than it should.

Owner
alexrj commented Nov 19, 2012

Can you please supply your exact STL file and your exported config.ini so that I can reproduce the issue?

Hi Alessandro,

Please find attached the requested files.
The interesting thing is that this works well in version 0.9.3.

Best Regards,

Ulisses

On 19 November 2012 15:22, Alessandro Ranellucci
notifications@github.comwrote:

Can you please supply your exact STL file and your exported config.ini so
that I can reproduce the issue?


Reply to this email directly or view it on GitHubhttps://github.com/alexrj/Slic3r/issues/806#issuecomment-10517289.

piit79 commented Nov 21, 2012

@ulisses31, just to let you know, the files were not attached to the issue. Please upload to a sharing service (e.g. Dropbox) and post links.

Hi,

It's now shared in Dropbox - I suppose it sent an email to you with the
link.

Best Regards,

Ulisses

On 21 November 2012 09:31, Petr Sedlacek notifications@github.com wrote:

@ulisses31 https://github.com/ulisses31, just to let you know, the
files were not attached to the issue. Please upload to a sharing service
(e.g. Dropbox) and post links.


Reply to this email directly or view it on GitHubhttps://github.com/alexrj/Slic3r/issues/806#issuecomment-10590509.

Owner
alexrj commented Dec 24, 2012

My Slic3r mailbox is a mess. Can you give me some hint about how to find that message, or, better put the links here?

Hi,

Here you have the link:

https://www.dropbox.com/sh/rpgtvrwdoay4dzb/2qznS51Iw5

Regards,

Ulisses

On 24 December 2012 11:37, Alessandro Ranellucci
notifications@github.comwrote:

My Slic3r mailbox is a mess. Can you give me some hint about how to find
that message, or, better put the links here?


Reply to this email directly or view it on GitHubhttps://github.com/alexrj/Slic3r/issues/806#issuecomment-11659149.

Owner
alexrj commented Dec 31, 2012

Looks like archimedeanchords wasn't working in 0.9.5. I can't reproduce. Are you sure you used that config? Are you able to reproduce the issue with 0.9.7 too?

Owner
alexrj commented Dec 31, 2012

Also, maybe related to #742?

Owner
alexrj commented May 13, 2013

No feedback – I'm closing this issue.

@alexrj alexrj closed this May 13, 2013
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment