GenesisL1 Mainnet (Cronos fork)

Release v1.0.0 ~ Cronos v1.0.15

Chain ID genesis_29-2

A source code fork of Cronos and Ethermint

Cosmos SDK v0.46.15

---

🧭 Introduction

Due to the recent on-chain minting of the full Protein Data Bank (PDB), the size of the GenesisL1 blockchain has increased significantly. This data-heavy event resulted in a substantial boost to storage requirements and syncing time. To address this, the GenesisL1 community provides multiple streamlined methods to get a node up and running quickly — including a bootstrapped data folder backup that allows syncing within hours instead of several days.

⚠️ IMPORTANT: In Step 2, you will need to choose one setup method: Option A, B, or C. Only follow one of these — copying all three will cause your setup to fail.

This repository is intended for those who want to join the Cronos-fork mainnet: genesis_29-2, using one of the following paths:

🔹 OPTION A: Bootstrapped Snapshot (Fastest Setup)

Use a fully synced 622GB data folder provided by the community, compressed to ~543GB.

🔹 OPTION B: State Sync Setup (Recommended for New Nodes)

Sync your node from a trusted block height using the built-in state sync mechanism.

🔹 OPTION C: Upgrade Existing Node

Migrate from the legacy Evmos-based network genesis-ethermint to the current Cronos-fork chain.

Warning

⚠️ Legacy Node Warning:

We were an Evmos-fork before deciding to hard fork to Cronos. If you're attempting a full-node sync from scratch, follow the instructions in the genesis-ethermint repository first.

---

1. ⚙️ System Requirements

Hardware

• Disk: 1000GB+ (NVMe M.2 SSD recommended)
• RAM: 8GB+ (16GB+ recommended)
• CPU: 4+ physical CPU cores | 8+ threads
• Network: > 100Mbit/s stable connection bothways

Software Setup

Debian based OS

sudo apt update && sudo apt upgrade -y
sudo apt install curl tar wget build-essential git make gcc liblz4-tool htop unzip -y

💡 Enable Swap (Optional but Recommended)

sudo fallocate -l 8G /swapfile
sudo chmod 600 /swapfile
sudo mkswap /swapfile
sudo swapon /swapfile

To persist:

sudo cp /etc/fstab /etc/fstab.bak
echo '/swapfile none swap sw 0 0' | sudo tee -a /etc/fstab

---

2. 🛠️ Node Setup Options

Important

Choose one method and expand the '>' :

🔹 A. Bootstrap with Provided Snapshot (Fastest; Trustfull)

Quick-Sync from provided `data` backup

cd ~
wget https://ftp.basementnodes.ca/genesis_backup_20250407082420.tar.lz4

If this one is currently unavailable try the following

cd ~
wget http://85.122.195.176:55865/genesis_backup_20250505.tar.gz

let the download finish and grab a coffee.

setup the github repo.

git clone https://github.com/JoMfN/genesis-crypto.git
cd genesis-crypto

create a .genesis folder with your config in the meanwhile.

sh setup/quick-sync.sh <moniker>

Follow the instructions in the terminal.

check if a .genesis folder was generated.

unzip the fully downloaded data folder

lz4 -d genesis_backup_20250407082420.tar.lz4 | tar -xvf -

If you downloaded the .tar.gz file instead:

tar -xvzf genesis_backup_20250505.tar.gz

replace it with the one existing in ~/.genesis/data

mv genesis_backup_20250407082420/* ~/.genesis/

If you downloaded the .tar.gz file instead:

mv genesis_backup_20250505/* ~/.genesis/

⚠️ Ensure genesisd is not running before replacing .genesis

🔹 B. State Sync from Recent Height (Trusted)

Setup a node _(using state sync)_ from a snapshot

git clone https://github.com/alpha-omega-labs/genesis-crypto.git
cd genesis-crypto
git checkout v1.0.0

[!IMPORTANT] Running this will wipe the entire database (the /data-folder excluding the priv_validator_state.json file). Therefore if you already have a node set up and you prefer not to have your GenesisL1 database lost, create a backup.

You could use utils/backup/create.sh for this.

sh setup/state-sync.sh <moniker>

💡 This method will auto-install genesisd and dependencies

🔹 C. Upgrade from genesis-ethermint (Trustless)

⚙️ Upgrade an ethermint Node synced from scratch

⚠️ Legacy Node Warning: If you're attempting a full-node sync from scratch, follow the instructions in the (repo: genesis-ethermint) and the node synced till height: 7400000 which caused it to panic.

Then to upgrade to the new mainnet (genesis_29-2):

sh setup/upgrade.sh

---

3. Daemon check

If you can't access the genesisd command at this point, then you may need to execute:

. ~/.bashrc

Or the equivalent: source ~/.bashrc

Try if now if you can initiate the node

genesisd start --log_level warn

Confirm everything initializes correctly, then stop it (Ctrl + C).

(Stop with Ctrl + C after confirmation)

⚙️ getting errors with helper script Go Installation (ignore if no error above)

For AMD:

ver="1.22.12"
wget "https://golang.org/dl/go$ver.linux-amd64.tar.gz"
sudo rm -rf /usr/local/go
sudo tar -C /usr/local -xzf "go$ver.linux-amd64.tar.gz"
rm "go$ver.linux-amd64.tar.gz"
echo "export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin" >> $HOME/.bash_profile
source $HOME/.bash_profile
go version

For ARM (Raspberry Pi 5):

wget https://go.dev/dl/go1.22.12.linux-arm64.tar.gz 
sudo rm -rf /usr/local/go
sudo tar -C /usr/local -xzf "go1.22.12.linux-arm64.tar.gz"
rm "go1.22.12.linux-arm64.tar.gz"
echo "export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin" >> $HOME/.bash_profile
source $HOME/.bash_profile
go version

---

4. Create or import a key (optional for just a node, required for validator node)

A key is necessary to interact with the network/node. If you haven't already created one, either import one or generate a new one, using:

replace <walletname> with an arbitrary name for your wallet key

sh utils/key/create.sh <walletname>

OR

sh utils/key/create.sh <walletname> <private_eth_key>

<private_eth_key> is the private key for a (wallet) address you already own (not recommended).

Tip

💡 TIP: Clear bash history:
history -c && exec bash

Note

Transfer some L1 to the wallet you just created

to check your keys:

genesisd keys list

To check wallet balance:

genesisd query bank balances $(genesisd keys show <walletname> -a)

🔐 Pro Key Management

Creating a new wallet (write down you seed phrase with pen and paper!)

genesisd keys add <walletname>

OR

Recover a wallet:

genesisd keys add <walletname> --recover

The terminal will request you to input the 24-words long seed phrase

---

5 installing genesisd as a service (optional)

In general you can always start the node just once, and have to keep track of this terminal window by prompting:

genesisd start --log_level warn

This can be automized by installing it as a service checkout the details below.

🖥️ Systemd Service Setup

sudo nano /etc/systemd/system/genesisd.service

Paste this:

[Unit]
Description=genesisd
After=network-online.target

[Service]
User=$USER
ExecStart=$(which genesisd) start
Restart=on-failure
RestartSec=15
LimitNOFILE=65535

[Install]
WantedBy=multi-user.target

Start it:

sudo systemctl start genesisd

check hidden genesisd output

journalctl -fu genesisd -ocat

---

6. Become a validator (optional, also very welcoming)

Warning

make sure you are in sync and genesisd is running

genesisd status

should show "catching_up":false

"catching_up": false

Once your node is up-and-running, fully synced and you have a key created or imported, you could become a validator using:

sh setup/create-validator.sh <moniker> <walletname>

This is a wizard and shall prompt the user only the required fields to create an on-chain validator.

⚙️ Pro Validator Setup

Watch the sync status by opening a new terminal and prompt genesisd status again. When you are in sync this appears:

"catching_up": false

Adjust gas-prices and gas if the transaction gives the error out-of-gas

genesisd tx staking create-validator \
  --amount=1000000el1 \
  --pubkey=$(genesisd tendermint show-validator) \
  --moniker="YOUR_NODE_NAME" \
  --identity="More_Info_You_Want_To_Add" \
  --website="" \
  --details="Example: Community Valoper node and Supporter of GenesisL1" \
  --security-contact="YourEmail@mail.com" \
  --chain-id="genesis_29-2" \
  --commission-rate="0.05" \
  --commission-max-rate="0.20" \
  --commission-max-change-rate="0.01" \
  --min-self-delegation="1" \
  --gas=355172 \
  --gas-prices=1127530424125el1 \
  --from=<walletname> \

---

7. Explore utilities

Tip

The /utils-folder contains useful utilities one could use to manage their node (e.g. for fetching latest seeds and peers, fetching the genesis state, quickly shifting your config's ports, recalibrating your state sync etc.). To learn more about these, see the README in the folder.

---

7.1 FAQ and useful links

FAQ -> Welcome for suggestions

Useful links presented below

Tip

Checking status of your validator node at ping.pub

MolNFT App

Anode team node installation guide

starv-team node installation guide

8. Acknowledgements

Special thanks to the contributors who made this bootstrap flow possible:

• @Zenodeapp — for reviewing these instructions and optimizing the required scripting.
• @Cordtus — for hosting and maintaining the FTP server for snapshot distribution.