diff --git a/3D_print_files/README.md b/3D_print_files/README.md
index 0acbc82..faee51e 100644
--- a/3D_print_files/README.md
+++ b/3D_print_files/README.md
@@ -1,4 +1,4 @@
-# Notes on `FlyPi_v29.scad`
+# Notes on `FlyPi_v30.scad`
 
 ## _Caution_
 
diff --git a/Arduino/fly_pi_development/fly_pi_development.ino b/Arduino/fly_pi_development/fly_pi_development.ino
index 822bf2e..3dc486f 100644
--- a/Arduino/fly_pi_development/fly_pi_development.ino
+++ b/Arduino/fly_pi_development/fly_pi_development.ino
@@ -68,11 +68,12 @@ float lowLimit = 13.0; //in Celsius
 
 //create function to control LED ring
 Adafruit_NeoPixel pixels = Adafruit_NeoPixel(ring_nPixels, RingPin, NEO_GRB + NEO_KHZ800);
+/*
 //create function to control matrix
-//Adafruit_8x8matrix matrix = Adafruit_8x8matrix();
+Adafruit_8x8matrix matrix = Adafruit_8x8matrix();
 
 //copntrol for long matrix
-Adafruit_8x16matrix matrix = Adafruit_8x16matrix();
+//Adafruit_8x16matrix matrix = Adafruit_8x16matrix();
 //matrix stimuli
 static const uint8_t PROGMEM // MATRIX PICS
 matrixPattern1[] =
@@ -106,6 +107,8 @@ matrixPattern4[] =
   B11111111,
   B11111111
 };
+*/
+
 void setup()
 { //start serial port
   Serial.begin(115200);
@@ -125,7 +128,7 @@ void setup()
   //pinMode(peltierCoolPin2,OUTPUT);
   focusServo.attach(servoPin);
   pixels.begin();
-
+/*
   // pass in the address for LED Matrix
   matrix.begin(0x70);
   matrix.clear();
@@ -133,6 +136,7 @@ void setup()
   matrix.writeDisplay();
   digitalWrite(servoOnPin, LOW);
   //Serial.println("waited");
+  */
 }//end void setup
 
 void loop() {
@@ -219,6 +223,7 @@ void loop() {
     Serial.println("waited");  
   }
  
+/*
   //MATRIX
   if (term1 == "MAT"){
     if (term2.toInt() == 0) { 
@@ -289,7 +294,8 @@ void loop() {
       matrix.writeDisplay();}
     Serial.println("waited");}
 
-
+*/
+  
   //RING
   if (term1=="RIN"){
     if (term2.toInt() == 1) { //ring on
diff --git a/README.md b/README.md
index db6faa3..88f3b09 100644
--- a/README.md
+++ b/README.md
@@ -1,6 +1,10 @@
 # Flypi
 This is the repository for the flypi project
 
+## to maintain this repository as close as possible to the publication describing it (http://journals.plos.org/plosbiology/article?id=10.1371/journal.pbio.2002702) further development is being done on the following fork: https://github.com/prometheus-science/Flypi/commit/ac9aac55044f0e4dddc3e00e41459db75cc05826
+
+## We've created a Forum for users to posts questions and suggestions too! Please take a look at http://forum.prometheus-science.com/home/categories/flypi-user-forum 
+
 # necessary libraries:
 
 LED Ring from Adafruit:
@@ -18,6 +22,8 @@ libav library:
 sudo apt-get update
 sudo apt-get install libav-tools
 
+
+
 # *.h264 conversion to *.avi:
 is done via avconv (which is installed with libav-tools).