From 23037f0320a4a26f3205110f9deb11d988ec97c6 Mon Sep 17 00:00:00 2001 From: Stanca Pop Date: Tue, 21 Oct 2025 18:24:05 +0300 Subject: [PATCH] docs/user-guide: Fix indentation for numbered lists Signed-off-by: Stanca Pop --- docs/eval/user-guide/mem/adxl355-pmdz/index.rst | 10 +++++----- .../user-guide/transceiver/adrv9009/prerequisites.rst | 2 +- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/docs/eval/user-guide/mem/adxl355-pmdz/index.rst b/docs/eval/user-guide/mem/adxl355-pmdz/index.rst index 71d5ec736..abd9c428e 100644 --- a/docs/eval/user-guide/mem/adxl355-pmdz/index.rst +++ b/docs/eval/user-guide/mem/adxl355-pmdz/index.rst @@ -271,19 +271,19 @@ MAX32655FTHR ------------ 1. Connect **MAX32655FTHR** with the **FTHR-PMOD-INTZ**. Note that MAXIM -feather board should have stacking headers for feather board where the -interposer board will be connected. + feather board should have stacking headers for feather board where the + interposer board will be connected. 2. Connect **EVAL-ADXL355-PMDZ** to the **FTHR-PMOD-INTZ**. 3. Power up the **MAX32655FTHR** by connecting it to your laptop using micro-USB 4. Open the file explorer. Drag-and-drop the pre-built hex file to the DAPLINK. -If the transfer was not completed, update the firmware for the DAPLINK. Follow -the steps here: https://github.com/MaximIntegrated/max32625pico-firmware-images/ + If the transfer was not completed, update the firmware for the DAPLINK. Follow + the steps here: https://github.com/MaximIntegrated/max32625pico-firmware-images/ 5. Open PuTTY or other similar software. Check the Device Manager to set -correct COM for the MAX32655FTHR. Set baud rate according to hex file used: + correct COM for the MAX32655FTHR. Set baud rate according to hex file used: +------------------------------------------------------------------+-----------+ | Hex file | Baud rate | diff --git a/docs/eval/user-guide/transceiver/adrv9009/prerequisites.rst b/docs/eval/user-guide/transceiver/adrv9009/prerequisites.rst index a3d030e41..a142d289d 100644 --- a/docs/eval/user-guide/transceiver/adrv9009/prerequisites.rst +++ b/docs/eval/user-guide/transceiver/adrv9009/prerequisites.rst @@ -20,7 +20,7 @@ start out with: or Linux). - :ref:`See the supported carriers `. -#. some way to interact with the platform, +#. Some way to interact with the platform, #. for the ARM/FPGA SoC platforms, this normally includes: