Skip to content
Find file
executable file 472 lines (388 sloc) 22.8 KB
<?xml version="1.0" encoding="utf-8"?>
<!--
/*
** Copyright 2009, The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
** http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
-->
<!-- These resources are around just to allow their values to be customized
for different hardware and product builds. -->
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
<!-- Component to be used as the status bar service. Must implement the IStatusBar
interface. This name is in the ComponentName flattened format (package/class) -->
<string name="config_statusBarComponent">com.android.systemui/com.android.systemui.statusbar.StatusBarService</string>
<!-- Do not translate. Defines the slots for the right-hand side icons. That is to say, the
icons in the status bar that are not notifications. -->
<string-array name="config_statusBarIcons">
<item><xliff:g id="id">ime</xliff:g></item>
<item><xliff:g id="id">sync_failing</xliff:g></item>
<item><xliff:g id="id">sync_active</xliff:g></item>
<item><xliff:g id="id">gps</xliff:g></item>
<item><xliff:g id="id">bluetooth</xliff:g></item>
<item><xliff:g id="id">nfc</xliff:g></item>
<item><xliff:g id="id">tty</xliff:g></item>
<item><xliff:g id="id">speakerphone</xliff:g></item>
<item><xliff:g id="id">mute</xliff:g></item>
<item><xliff:g id="id">volume</xliff:g></item>
<item><xliff:g id="id">wifi</xliff:g></item>
<item><xliff:g id="id">cdma_eri</xliff:g></item>
<item><xliff:g id="id">data_connection</xliff:g></item>
<item><xliff:g id="id">phone_evdo_signal</xliff:g></item>
<item><xliff:g id="id">phone_signal</xliff:g></item>
<item><xliff:g id="id">battery</xliff:g></item>
<item><xliff:g id="id">alarm_clock</xliff:g></item>
<item><xliff:g id="id">secure</xliff:g></item>
<item><xliff:g id="id">clock</xliff:g></item>
</string-array>
<!-- Flag indicating whether the surface flinger has limited
alpha compositing functionality in hardware. If set, the window
manager will disable alpha trasformation in animations where not
strictly needed. -->
<bool name="config_sf_limitedAlpha">false</bool>
<!-- Flag indicating whether the surface flinger is inefficient
at performing a blur. Used by parts of the UI to turn off
the blur effect where it isn't worth the performance hit. -->
<bool name="config_sf_slowBlur">false</bool>
<!-- The duration (in milliseconds) of a short animation. -->
<integer name="config_shortAnimTime">150</integer>
<!-- The duration (in milliseconds) of a medium-length animation. -->
<integer name="config_mediumAnimTime">300</integer>
<!-- The duration (in milliseconds) of a long animation. -->
<integer name="config_longAnimTime">400</integer>
<!-- The duration (in milliseconds) that the radio will scan for a signal
when there's no network connection. If the scan doesn't timeout, use zero -->
<integer name="config_radioScanningTimeout">0</integer>
<!-- A product with no SD card == not removable. -->
<bool name="config_externalStorageRemovable" product="nosdcard">false</bool>
<!-- Configures whether the primary external storage device is
removable. For example, if external storage is on an SD card,
it is removable; if it is built in to the device, it is not removable.
The default product has external storage on an SD card, which is
removable. -->
<bool name="config_externalStorageRemovable" product="default">true</bool>
<!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION.
Please don't copy them, copy anything else. -->
<!-- This string array should be overridden by the device to present a list of network
attributes. This is used by the connectivity manager to decide which networks can coexist
based on the hardware -->
<!-- An Array of "[Connection name],[ConnectivityManager connection type],
[associated radio-type],[priority] -->
<string-array translatable="false" name="networkAttributes">
<item>"wifi,1,1,1"</item>
<item>"mobile,0,0,0"</item>
<item>"mobile_mms,2,0,2"</item>
<item>"mobile_supl,3,0,2"</item>
<item>"mobile_hipri,5,0,3"</item>
</string-array>
<!-- This string array should be overridden by the device to present a list of radio
attributes. This is used by the connectivity manager to decide which networks can coexist
based on the hardware -->
<!-- An Array of "[ConnectivityManager connectionType],
[# simultaneous connection types]" -->
<string-array translatable="false" name="radioAttributes">
<item>"1,1"</item>
<item>"0,1"</item>
</string-array>
<!-- List of regexpressions describing the interface (if any) that represent tetherable
USB interfaces. If the device doesn't want to support tething over USB this should
be empty. An example would be "usb.*" -->
<string-array translatable="false" name="config_tether_usb_regexs">
</string-array>
<!-- List of regexpressions describing the interface (if any) that represent tetherable
Wifi interfaces. If the device doesn't want to support tethering over Wifi this
should be empty. An example would be "softap.*" -->
<string-array translatable="false" name="config_tether_wifi_regexs">
</string-array>
<!-- Dhcp range (min, max) to use for tethering purposes -->
<string-array translatable="false" name="config_tether_dhcp_range">
</string-array>
<!-- Regex array of allowable upstream ifaces for tethering - for example if you want
tethering on a new interface called "foo2" add <item>"foo\\d"</item> to the array -->
<!-- Interfaces will be prioritized according to the order listed -->
<string-array translatable="false" name="config_tether_upstream_regexs">
</string-array>
<!-- Boolean indicating if we require the use of DUN on mobile for tethering.
Note that this defaults to false so that if you move to a carrier that
hasn't configured anything tethering will still work. If you'd rather
make the device untetherable on unconfigured devices, set to true -->
<bool translatable="false" name="config_tether_dun_required">false</bool>
<!-- String containing the apn value for tethering. May be overriden by secure settings
TETHER_DUN_APN. Value is a comma separated series of strings:
"name,apn,proxy,port,username,password,server,mmsc,mmsproxy,mmsport,mcc,mnc,auth,type"
note that empty fields can be ommitted: "name,apn,,,,,,,,,310,260,,DUN" -->
<string translatable="false" name="config_tether_apndata"></string>
<!-- Flag indicating whether the keyguard should be bypassed when
the slider is open. This can be set or unset depending how easily
the slider can be opened (for example, in a pocket or purse). -->
<bool name="config_bypass_keyguard_if_slider_open">true</bool>
<!-- Flag indicating whether the we should enable the automatic brightness in Settings.
Software implementation will be used if config_hardware_auto_brightness_available is not set -->
<bool name="config_automatic_brightness_available">false</bool>
<!-- Don't name config resources like this. It should look like config_annoyDianne -->
<bool name="config_annoy_dianne">true</bool>
<!-- If this is true, the screen will come on when you unplug usb/power/whatever. -->
<bool name="config_unplugTurnsOnScreen">false</bool>
<!-- If this is true, the screen will fade off. -->
<bool name="config_animateScreenLights">true</bool>
<!-- XXXXXX END OF RESOURCES USING WRONG NAMING CONVENTION -->
<!-- The number of degrees to rotate the display when the keyboard is open. -->
<integer name="config_lidOpenRotation">90</integer>
<!-- The number of degrees to rotate the display when the device is in a desk dock.
A value of -1 means no change in orientation by default. -->
<integer name="config_deskDockRotation">-1</integer>
<!-- The number of degrees to rotate the display when the device is in a car dock.
A value of -1 means no change in orientation by default. -->
<integer name="config_carDockRotation">-1</integer>
<!-- Control whether being in the desk dock (and powered) always
keeps the screen on. By default it stays on when plugged in to
AC. 0 will not keep it on; or together 1 to stay on when plugged
in to AC and 2 to stay on when plugged in to USB. (So 3 for both.) -->
<integer name="config_deskDockKeepsScreenOn">1</integer>
<!-- Control whether being in the car dock (and powered) always
keeps the screen on. By default it stays on when plugged in to
AC. 0 will not keep it on; or together 1 to stay on when plugged
in to AC and 2 to stay on when plugged in to USB. (So 3 for both.) -->
<integer name="config_carDockKeepsScreenOn">1</integer>
<!-- Control whether being in the desk dock should enable accelerometer
based screen orientation. Note this should probably default to true
like car dock, but we haven't had a chance to test it. -->
<bool name="config_deskDockEnablesAccelerometer">false</bool>
<!-- Control whether being in the car dock should enable accelerometer based
screen orientation. This defaults to true because putting a device in
a car dock make the accelerometer more a physical input (like a lid). -->
<bool name="config_carDockEnablesAccelerometer">true</bool>
<!-- Indicate whether the lid state impacts the accessibility of
the physical keyboard. 0 means it doesn't, 1 means it is accessible
when the lid is open, 2 means it is accessible when the lid is
closed. The default is 1. -->
<integer name="config_lidKeyboardAccessibility">1</integer>
<!-- Indicate whether the lid state impacts the accessibility of
the physical keyboard. 0 means it doesn't, 1 means it is accessible
when the lid is open, 2 means it is accessible when the lid is
closed. The default is 0. -->
<integer name="config_lidNavigationAccessibility">0</integer>
<!-- Indicate whether the SD card is accessible without removing the battery. -->
<bool name="config_batterySdCardAccessibility">false</bool>
<!-- Vibrator pattern for feedback about a long screen/key press -->
<integer-array name="config_longPressVibePattern">
<item>0</item>
<item>1</item>
<item>20</item>
<item>21</item>
</integer-array>
<!-- Vibrator pattern for feedback about touching a virtual key -->
<integer-array name="config_virtualKeyVibePattern">
<item>0</item>
<item>10</item>
<item>20</item>
<item>30</item>
</integer-array>
<!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap -->
<integer-array name="config_keyboardTapVibePattern">
<item>40</item>
</integer-array>
<!-- Vibrator pattern for feedback about booting with safe mode disabled -->
<integer-array name="config_safeModeDisabledVibePattern">
<item>0</item>
<item>1</item>
<item>20</item>
<item>21</item>
</integer-array>
<!-- Vibrator pattern for feedback about booting with safe mode disabled -->
<integer-array name="config_safeModeEnabledVibePattern">
<item>0</item>
<item>1</item>
<item>20</item>
<item>21</item>
<item>500</item>
<item>600</item>
</integer-array>
<!-- Vibrator pattern for feedback about hitting a scroll barrier -->
<integer-array name="config_scrollBarrierVibePattern">
<item>0</item>
<item>15</item>
<item>10</item>
<item>10</item>
</integer-array>
<bool name="config_use_strict_phone_number_comparation">false</bool>
<!-- Display low battery warning when battery level dips to this value -->
<integer name="config_lowBatteryWarningLevel">15</integer>
<!-- Close low battery warning when battery level reaches this value -->
<integer name="config_lowBatteryCloseWarningLevel">20</integer>
<!-- Default color for notification LED. -->
<color name="config_defaultNotificationColor">#ff00ff00</color>
<!-- Default LED on time for notification LED in milliseconds. -->
<integer name="config_defaultNotificationLedOn">500</integer>
<!-- Default LED off time for notification LED in milliseconds. -->
<integer name="config_defaultNotificationLedOff">2000</integer>
<!-- Allow the menu hard key to be disabled in LockScreen on some devices -->
<bool name="config_disableMenuKeyInLockScreen">false</bool>
<!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
The N entries of this array define N + 1 zones as follows:
Zone 0: 0 <= LUX < array[0]
Zone 1: array[0] <= LUX < array[1]
...
Zone N: array[N - 1] <= LUX < array[N]
Zone N + 1: array[N] <= LUX < infinity
Must be overridden in platform specific overlays -->
<integer-array name="config_autoBrightnessLevels">
</integer-array>
<!-- Array of output values for LCD backlight corresponding to the LUX values
in the config_autoBrightnessLevels array. This array should have size one greater
than the size of the config_autoBrightnessLevels array.
This must be overridden in platform specific overlays -->
<integer-array name="config_autoBrightnessLcdBacklightValues">
</integer-array>
<!-- Array of output values for button backlight corresponding to the LUX values
in the config_autoBrightnessLevels array. This array should have size one greater
than the size of the config_autoBrightnessLevels array.
This must be overridden in platform specific overlays -->
<integer-array name="config_autoBrightnessButtonBacklightValues">
</integer-array>
<!-- Array of output values for keyboard backlight corresponding to the LUX values
in the config_autoBrightnessLevels array. This array should have size one greater
than the size of the config_autoBrightnessLevels array.
This must be overridden in platform specific overlays -->
<integer-array name="config_autoBrightnessKeyboardBacklightValues">
</integer-array>
<!-- Amount of time it takes for the light sensor to warm up in milliseconds.
For this time after the screen turns on, the Power Manager
will not debounce light sensor readings -->
<integer name="config_lightSensorWarmupTime">0</integer>
<!-- Enables swipe versus poly-finger touch disambiguation in the KeyboardView -->
<bool name="config_swipeDisambiguation">true</bool>
<!-- Enables special filtering code in the framework for raw touch events
from the touch driver. This code exists for one particular device,
and should not be enabled for any others. Hopefully in the future
it will be removed when the lower-level touch driver generates better
data. -->
<bool name="config_filterTouchEvents">false</bool>
<!-- Enables special filtering code in the framework for raw touch events
from the touch driver. This code exists for one particular device,
and should not be enabled for any others. -->
<bool name="config_filterJumpyTouchEvents">false</bool>
<!-- Specifies the amount of time to disable virtual keys after the screen is touched
in order to filter out accidental virtual key presses due to swiping gestures
or taps near the edge of the display. May be 0 to disable the feature.
It is recommended that this value be no more than 250 ms.
This feature should be disabled for most devices. -->
<integer name="config_virtualKeyQuietTimeMillis">0</integer>
<!-- Component name of the default wallpaper. This will be ImageWallpaper if not
specified -->
<string name="default_wallpaper_component">@null</string>
<!-- Component name of the service providing network location support. -->
<string name="config_networkLocationProvider">@null</string>
<!-- Component name of the service providing geocoder API support. -->
<string name="config_geocodeProvider">@null</string>
<!-- Boolean indicating if current platform supports bluetooth SCO for off call
use cases -->
<bool name="config_bluetooth_sco_off_call">true</bool>
<!-- The default data-use polling period. -->
<integer name="config_datause_polling_period_sec">600</integer>
<!-- The default data-use threshold in bytes. 0 disables-->
<integer name="config_datause_threshold_bytes">0</integer>
<!-- The default reduced-datarate value in kilobits per sec -->
<integer name="config_datause_throttle_kbitsps">300</integer>
<!-- The default iface on which to monitor data use -->
<string name="config_datause_iface">rmnet0</string>
<!-- The default reduced-datarate notification mask -->
<!-- 2 means give warning -->
<integer name="config_datause_notification_type">2</integer>
<!-- Enables SIP on WIFI only -->
<bool name="config_sip_wifi_only">true</bool>
<!-- Boolean indicating if restoring network selection should be skipped -->
<!-- The restoring is handled by modem if it is true-->
<bool translatable="false" name="skip_restoring_network_selection">false</bool>
<!-- Do not translate. Defines the slots is Two Digit Number for dialing normally not USSD -->
<string-array name="config_twoDigitNumberPattern">
</string-array>
<!-- The VoiceMail default value is displayed to my own number if it is true -->
<bool name="config_telephony_use_own_number_for_voicemail">false</bool>
<!-- If this value is true, Sms encoded as octet is decoded by utf8 decoder.
If false, decoded by Latin decoder. -->
<bool name="config_sms_utf8_support">false</bool>
<!-- If this value is true, The mms content-disposition field is supported correctly.
If false, Content-disposition fragments are ignored -->
<bool name="config_mms_content_disposition_support">true</bool>
<!-- If this value is true, the carrier supports sms delivery reports.
If false, sms delivery reports are not supported and the preference
option to enable/disable delivery reports is removed in the Messaging app. -->
<bool name="config_sms_delivery_reports_support">true</bool>
<!-- If this value is true, the carrier supports mms delivery reports.
If false, mms delivery reports are not supported and the preference
option to enable/disable delivery reports is removed in the Messaging app. -->
<bool name="config_mms_delivery_reports_support">true</bool>
<!-- If this value is true, the carrier supports mms read reports.
If false, mms read reports are not supported and the preference
option to enable/disable read reports is removed in the Messaging app. -->
<bool name="config_mms_read_reports_support">true</bool>
<!-- National Language Identifier codes for the following two config items.
(from 3GPP TS 23.038 V9.1.1 Table 6.2.1.2.4.1):
0 - reserved
1 - Turkish
2 - Spanish (single shift table only)
3 - Portuguese
4 - Bengali
5 - Gujarati
6 - Hindi
7 - Kannada
8 - Malayalam
9 - Oriya
10 - Punjabi
11 - Tamil
12 - Telugu
13 - Urdu
14+ - reserved -->
<!-- National language single shift tables to enable for SMS encoding.
Decoding is always enabled. 3GPP TS 23.038 states that this feature
should not be enabled until a formal request is issued by the relevant
national regulatory body. Array elements are codes from the table above.
Example 1: devices sold in Turkey must include table 1 to conform with
By-Law Number 27230. (http://www.btk.gov.tr/eng/pdf/2009/BY-LAW_SMS.pdf)
Example 2: devices sold in India should include tables 4 through 13
to enable use of the new Release 9 tables for Indic languages. -->
<integer-array name="config_sms_enabled_single_shift_tables"></integer-array>
<!-- National language locking shift tables to enable for SMS encoding.
Decoding is always enabled. 3GPP TS 23.038 states that this feature
should not be enabled until a formal request is issued by the relevant
national regulatory body. Array elements are codes from the table above.
Example 1: devices sold in Turkey must include table 1 after the
Turkish Telecommunication Authority requires locking shift encoding
to be enabled (est. July 2012). (http://www.btk.gov.tr/eng/pdf/2009/BY-LAW_SMS.pdf)
See also: http://www.mobitech.com.tr/tr/ersanozturkblog_en/index.php?entry=entry090223-160014
Example 2: devices sold in India should include tables 4 through 13
to enable use of the new Release 9 tables for Indic languages. -->
<integer-array name="config_sms_enabled_locking_shift_tables"></integer-array>
<!-- Set and Unsets WiMAX -->
<bool name="config_wimaxEnabled">false</bool>
<!-- Location of the wimax framwork jar location -->
<string name="config_wimaxServiceJarLocation"></string>
<!-- Location of the wimax native library locaiton -->
<string name="config_wimaxNativeLibLocation"></string>
<!-- Name of the wimax manager class -->
<string name="config_wimaxManagerClassname"></string>
<!-- Name of the wimax service class -->
<string name="config_wimaxServiceClassname"></string>
<!-- Name of the wimax state tracker clas -->
<string name="config_wimaxStateTrackerClassname"></string>
<!-- Set to true if the RSSI should always display CDMA signal strength
even on EVDO -->
<bool name="config_alwaysUseCdmaRssi">false</bool>
<!-- If this value is true, duplicate Source/Destination port fields
in WDP header of some carriers OMADM wap push are supported.
ex: MSGTYPE-TotalSegments-CurrentSegment
-SourcePortDestPort-SourcePortDestPort-OMADM PDU
If false, not supported. -->
<bool name="config_duplicate_port_omadm_wappush">false</bool>
</resources>
Jump to Line
Something went wrong with that request. Please try again.