Skip to content
camera control via VISCA protocol
C++ Makefile
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
docs
example_ofxVisca
example_ofxVisca_cam
src
.gitignore
README.md

README.md

ofxVisca

Description

  • This openframeworks.cc addon enables remote camera control via RS485 (Visca)
  • Many block cameras use the VISCA protocol. We only tested it on Marshall cameras.
  • Serial commands are send over a USB-RS485 converter to each camera.

System

  • This was tested on macOS 10.12.6 with OF 0.10.1 and Xcode 9.2
  • Should work on other operating systems too.

Used Equipment

  • Marshall Electronics CV345-CS HD 2.5MP 3G-SDI/HDMI Compact Progressive Camera, MFR # CV345-CS

  • Marshall Electronics CV380-CS 4K 8.5MP 6G-SDI & HDMI CS/C-Mount Compact Camera, MFR # CV380-CS

  • Magewell USB Capture SDI Gen 2, MFR # 32070

  • Marshall Electronics USB to RS-485/RS-422 Converter, MFR # CV-USB-RS485

  • SparkFun USB to RS-485 Converter, MFR # BOB-09822

Screenshots

  • Here are screenshots of my project setup:
You can’t perform that action at this time.