Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We鈥檒l occasionally send you account related emails.

Already on GitHub? Sign in to your account

[Library Manager] Please add this lovely library 馃挅 #7799

Closed
4 tasks done
bblanchon opened this issue Jul 19, 2018 · 2 comments
Closed
4 tasks done

[Library Manager] Please add this lovely library 馃挅 #7799

bblanchon opened this issue Jul 19, 2018 · 2 comments
Labels
Component: Board/Lib Manager Boards Manager or Library Manager

Comments

@bblanchon
Copy link
Contributor

bblanchon commented Jul 19, 2018

Hello Arduino team,

I see that you have a long backlog of libraries to add, but I hope that you'll find the time to add this new library of mine:

It should be ready to go:

  • git tag
  • library.properties
  • examples
  • keywords.txt

Thank you very much 馃槉馃槉馃槉

@per1234 per1234 added the Component: Board/Lib Manager Boards Manager or Library Manager label Jul 19, 2018
@cmaglie
Copy link
Member

cmaglie commented Jul 26, 2018

Done, sorry for the delay

@cmaglie cmaglie closed this as completed Jul 26, 2018
@kvonarya
Copy link

This is to indicate TRACE, DUMP and <ArduinoTrace.h> have no value and are of no help troubleshooting Arduino IDE sketches when the first thing that fail is serial monitor displaying texts.
Serial monitor freezes and stops while my program keeps running and functioning as can be seen thru
Arduino UNO I/O.
I do nothing fancy or special with serial monitor, all related to serial in my code is like:
.....
#include "Arduino.h"
#include "SoftwareSerial.h"
.....
SoftwareSerial mySoftwareSerial(10, 11); // RX, TX
.......
void setup() {
mySoftwareSerial.begin(9600);
Serial.begin(9600);
Serial.println();
......
}
//********************** setup ends here ******************************************

//************************************ Main Loop **********************************
void loop() {
.........
Serial.println("write message 1");
.........
Serial.print("write message 2 ");
..........
Serial.println(avariable);
..........
Serial.println("write message 3");
}
So no matter where I put TRACE or DUMP, I see nothing on serial monitor.

@arduino arduino locked as off-topic and limited conversation to collaborators Feb 16, 2020
Sign up for free to subscribe to this conversation on GitHub. Already have an account? Sign in.
Labels
Component: Board/Lib Manager Boards Manager or Library Manager
Projects
None yet
Development

No branches or pull requests

4 participants