Fetching latest commit…
Cannot retrieve the latest commit at this time.
Arduino Uno and Mega 2560 Firmwares for the ATmega8U2 This directory contains the firmwares used on the ATmega8U2 on the Arduino Uno and Arduino Mega 2560. The arduino-usbdfu directory contains the DFU bootloader on the 8U2; the arduino-usbserial directory contains the actual usb to serial firmware. Both should be compiled against LUFA 100807. The two .hex files in this directory combine the dfu and serial firmwares into a single file to burn onto the 8U2. To burn (Uno): avrdude -p at90usb82 -F -P usb -c avrispmkii -U flash:w:UNO-dfu_and_usbserial_combined.hex -U lfuse:w:0xFF:m -U hfuse:w:0xD9:m -U efuse:w:0xF4:m -U lock:w:0x0F:m To burn (Mega 2560): avrdude -p at90usb82 -F -P usb -c avrispmkii -U flash:w:MEGA-dfu_and_usbserial_combined.hex -U lfuse:w:0xFF:m -U hfuse:w:0xD9:m -U efuse:w:0xF4:m -U lock:w:0x0F:m Note on USB Vendor IDs (VID) and Product IDs (PID): The arduino-usbdfu project uses Atmel's VID and MCU-specific PIDs to maintain compatibility with their FLIP software. The source code to the arduino-usbserial project includes Atmel's VID and a PID donated by them to LUFA. This PID is used in LUFA's USBtoSerial project, which forms the basis for arduino-usbserial. According to the LUFA documentation, this VID/PID combination is: "For use in testing of LUFA powered devices during development only, by non-commercial entities. All devices must accept collisions on this VID/PID range (from other in-development LUFA devices) to be resolved by using a unique release number in the Device Descriptor. No devices using this VID/PID combination may be released to the general public." The production version of the arduino-usbserial firmware uses the Arduino VID. This is only for use with official Arduino hardware and should not be used on other products.