Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
branch: master
Fetching contributors…

Cannot retrieve contributors at this time

135 lines (112 sloc) 5.506 kb
//**** ATMEL AVR - A P P L I C A T I O N N O T E ************************
//*
//* Title: AVR068 - STK500 Communication Protocol
//* Filename: command.h
//* Version: 1.0
//* Last updated: 10.01.2005
//*
//* Support E-mail: avr@atmel.com
//*
//**************************************************************************
// *****************[ STK message constants ]***************************
#define MESSAGE_START 0x1B //= ESC = 27 decimal
#define TOKEN 0x0E
// *****************[ STK general command constants ]**************************
#define CMD_SIGN_ON 0x01
#define CMD_SET_PARAMETER 0x02
#define CMD_GET_PARAMETER 0x03
#define CMD_SET_DEVICE_PARAMETERS 0x04
#define CMD_OSCCAL 0x05
#define CMD_LOAD_ADDRESS 0x06
#define CMD_FIRMWARE_UPGRADE 0x07
// *****************[ STK ISP command constants ]******************************
#define CMD_ENTER_PROGMODE_ISP 0x10
#define CMD_LEAVE_PROGMODE_ISP 0x11
#define CMD_CHIP_ERASE_ISP 0x12
#define CMD_PROGRAM_FLASH_ISP 0x13
#define CMD_READ_FLASH_ISP 0x14
#define CMD_PROGRAM_EEPROM_ISP 0x15
#define CMD_READ_EEPROM_ISP 0x16
#define CMD_PROGRAM_FUSE_ISP 0x17
#define CMD_READ_FUSE_ISP 0x18
#define CMD_PROGRAM_LOCK_ISP 0x19
#define CMD_READ_LOCK_ISP 0x1A
#define CMD_READ_SIGNATURE_ISP 0x1B
#define CMD_READ_OSCCAL_ISP 0x1C
#define CMD_SPI_MULTI 0x1D
// *****************[ STK PP command constants ]*******************************
#define CMD_ENTER_PROGMODE_PP 0x20
#define CMD_LEAVE_PROGMODE_PP 0x21
#define CMD_CHIP_ERASE_PP 0x22
#define CMD_PROGRAM_FLASH_PP 0x23
#define CMD_READ_FLASH_PP 0x24
#define CMD_PROGRAM_EEPROM_PP 0x25
#define CMD_READ_EEPROM_PP 0x26
#define CMD_PROGRAM_FUSE_PP 0x27
#define CMD_READ_FUSE_PP 0x28
#define CMD_PROGRAM_LOCK_PP 0x29
#define CMD_READ_LOCK_PP 0x2A
#define CMD_READ_SIGNATURE_PP 0x2B
#define CMD_READ_OSCCAL_PP 0x2C
#define CMD_SET_CONTROL_STACK 0x2D
// *****************[ STK HVSP command constants ]*****************************
#define CMD_ENTER_PROGMODE_HVSP 0x30
#define CMD_LEAVE_PROGMODE_HVSP 0x31
#define CMD_CHIP_ERASE_HVSP 0x32
#define CMD_PROGRAM_FLASH_HVSP 0x33
#define CMD_READ_FLASH_HVSP 0x34
#define CMD_PROGRAM_EEPROM_HVSP 0x35
#define CMD_READ_EEPROM_HVSP 0x36
#define CMD_PROGRAM_FUSE_HVSP 0x37
#define CMD_READ_FUSE_HVSP 0x38
#define CMD_PROGRAM_LOCK_HVSP 0x39
#define CMD_READ_LOCK_HVSP 0x3A
#define CMD_READ_SIGNATURE_HVSP 0x3B
#define CMD_READ_OSCCAL_HVSP 0x3C
// *****************[ STK test command constants ]***************************
#define CMD_ENTER_TESTMODE 0x60
#define CMD_LEAVE_TESTMODE 0x61
#define CMD_CHIP_WRITE 0x62
#define CMD_PROGRAM_FLASH_PARTIAL 0x63
#define CMD_PROGRAM_EEPROM_PARTIAL 0x64
#define CMD_PROGRAM_SIGNATURE_ROW 0x65
#define CMD_READ_FLASH_MARGIN 0x66
#define CMD_READ_EEPROM_MARGIN 0x67
#define CMD_READ_SIGNATURE_ROW_MARGIN 0x68
#define CMD_PROGRAM_TEST_FUSE 0x69
#define CMD_READ_TEST_FUSE 0x6A
#define CMD_PROGRAM_HIDDEN_FUSE_LOW 0x6B
#define CMD_READ_HIDDEN_FUSE_LOW 0x6C
#define CMD_PROGRAM_HIDDEN_FUSE_HIGH 0x6D
#define CMD_READ_HIDDEN_FUSE_HIGH 0x6E
#define CMD_PROGRAM_HIDDEN_FUSE_EXT 0x6F
#define CMD_READ_HIDDEN_FUSE_EXT 0x70
// *****************[ STK status constants ]***************************
// Success
#define STATUS_CMD_OK 0x00
// Warnings
#define STATUS_CMD_TOUT 0x80
#define STATUS_RDY_BSY_TOUT 0x81
#define STATUS_SET_PARAM_MISSING 0x82
// Errors
#define STATUS_CMD_FAILED 0xC0
#define STATUS_CKSUM_ERROR 0xC1
#define STATUS_CMD_UNKNOWN 0xC9
// *****************[ STK parameter constants ]***************************
#define PARAM_BUILD_NUMBER_LOW 0x80
#define PARAM_BUILD_NUMBER_HIGH 0x81
#define PARAM_HW_VER 0x90
#define PARAM_SW_MAJOR 0x91
#define PARAM_SW_MINOR 0x92
#define PARAM_VTARGET 0x94
#define PARAM_VADJUST 0x95
#define PARAM_OSC_PSCALE 0x96
#define PARAM_OSC_CMATCH 0x97
#define PARAM_SCK_DURATION 0x98
#define PARAM_TOPCARD_DETECT 0x9A
#define PARAM_STATUS 0x9C
#define PARAM_DATA 0x9D
#define PARAM_RESET_POLARITY 0x9E
#define PARAM_CONTROLLER_INIT 0x9F
// *****************[ STK answer constants ]***************************
#define ANSWER_CKSUM_ERROR 0xB0
Jump to Line
Something went wrong with that request. Please try again.