Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

PlatformIO is not detecting automatically upload port #1629

Sunrise17 opened this Issue Jan 18, 2018 · 1 comment


None yet
1 participant
Copy link

Sunrise17 commented Jan 18, 2018

PlatformIO is not detecting automatically upload port. With Tasmota's previous versions with same MacBook using Platformio i have uploaded many devices, but now i have started to receive following error below.
When i am using esptool, its successfully uploads pre-compiled version as follows; --port=/dev/cu.usbserial-A50285BI -b 115200 write_flash 0x0 ~/Downloads/sonoff.bin

There is no problem in driver of my FTDI usb device, it is recognised by Platformio, i have build the code and it builds successfully but when i start uploading, i am getting such error. I tried to add "upload_port =/dev/cu.usbserial-A50285BI" in Sonoff environment in platformio.ini file but it did not solve the issue.

ekran resmi 2018-01-18 15 53 19

ekran resmi 2018-01-18 15 51 24


This comment has been minimized.

Copy link

Sunrise17 commented Jan 18, 2018

After i have made following adjustment in platformio.ini, its successfully uploaded.

ekran resmi 2018-01-18 23 08 13

@Sunrise17 Sunrise17 closed this Jan 18, 2018

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.