Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Support for Gosund Sp1-C_V2.3 #4297

Closed
AugustH opened this issue Nov 6, 2018 · 12 comments
Closed

Support for Gosund Sp1-C_V2.3 #4297

AugustH opened this issue Nov 6, 2018 · 12 comments

Comments

@AugustH
Copy link

@AugustH AugustH commented Nov 6, 2018

Have you look for this feature in other issues and in the wiki?
yes

Is your feature request related to a problem? Please describe.
Gosund SP1 has a new version - new layout and new pins, differs from the version shown at https://www.bastelbunker.de/gosund-sp1-mit-tasmota

Describe the solution you'd like
device should work out of the box ;-)

Describe alternatives you've considered
the measurement chip can only configured in the source :-(

Just got a Gosund SP1 (https://www.amazon.de/gp/product/B0777BWS1P) -- there is a new chip layout resulting in new GPIO connections. The board is labeled "SP1-C_V2.3 20180926".

I got it to work with the following config (not sure about the leds, but the powermeter and the relay is working):

{ "Gosund SP1-C_v23",  // https://www.amazon.de/gp/product/B0777BWS1P
 GPIO_LED2_INV,    // GPIO00 Red Led (1 = On, 0 = Off)
 GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
 GPIO_LED1_INV,    // GPIO02 Blue Led (1 = On, 0 = Off)
 GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
 GPIO_HJL_CF,      // GPIO04 BL0937 or HJL-01 CF power
 GPIO_NRG_CF1,     // GPIO05 BL0937 or HJL-01 CF1 current / voltage
 0, 0, 0, 0, 0, 0, // Flash connection
 GPIO_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage)
 GPIO_KEY1,        // GPIO13 Button
 GPIO_REL1,        // GPIO14 Relay (0 = Off, 1 = On)
 0, 0, 0
 },
@ascillato

This comment has been minimized.

Copy link
Contributor

@ascillato ascillato commented Nov 7, 2018

Hi,

Thanks for sharing this information.

Please, add it to the wiki at other devices for letting other people find it and use it.

Thanks

@AugustH

This comment has been minimized.

Copy link
Author

@AugustH AugustH commented Nov 7, 2018

fixed Config (button and leds)

 { "Gosund SP1_v23",  // https://www.amazon.de/gp/product/B0777BWS1P
 0,    
 GPIO_LED1_INV,    // GPIO01 Serial RXD and LED1 (blue) inv
 0,        
 GPIO_KEY1,        // GPIO03 Serial TXD and Button
 GPIO_HJL_CF,      // GPIO04 BL0937 or HJL-01 CF power
 GPIO_NRG_CF1,     // GPIO05 BL0937 or HJL-01 CF1 current / voltage
 0, 0, 0, 0, 0, 0, // Flash connection
 GPIO_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage)
 GPIO_LED2_INV,    // GPIO13 LED2 (red) inv
 GPIO_REL1,        // GPIO14 Relay (0 = Off, 1 = On)
 0, 0, 0
 }
@ascillato2

This comment has been minimized.

Copy link
Collaborator

@ascillato2 ascillato2 commented Nov 7, 2018

Great, thanks a lot. Can you add this information to the wiki under other devices?

Thanks again 👍

@AugustH

This comment has been minimized.

Copy link
Author

@AugustH AugustH commented Nov 8, 2018

arendst added a commit that referenced this issue Nov 8, 2018
Add support for Gosund SP1 v2.3 Power Socket with Energy Monitoring (#4297)
@aritmeester

This comment has been minimized.

Copy link

@aritmeester aritmeester commented Nov 9, 2018

Choosing the Teckin module is also approved working for this board revision. Same applies for #4303

So now we have three possible configuration options for all those clones together:

  1. Gosund SP1_v23
  2. Teckin
  3. BlitzWolf SHP2
@R-Guhr

This comment has been minimized.

Copy link

@R-Guhr R-Guhr commented Nov 27, 2018

Hardware button is not working! Tasmota v6.3.0, BlitzWolf BW-SHP2 v2.3 (Teckin)

@prankousky

This comment has been minimized.

Copy link

@prankousky prankousky commented Nov 28, 2018

Can you please post a photo and label the neccessary pins (GND, VCC, TX, RX, and the one to flash)?

I just bought those on the German amazon Black Friday sale, was looking forward to flash, and now cannot figure out how to. I tried finding the pins myself with a multimeter, but could only get RX and TX, and am not even sure about those (never actually had to try this before because this wiki -and the link you provided- had already done it).

Thanks in advance / vielen Dank 👍

@AugustH

This comment has been minimized.

Copy link
Author

@AugustH AugustH commented Nov 28, 2018

@prankousky

This comment has been minimized.

Copy link

@prankousky prankousky commented Nov 28, 2018

@AugustH awesome, thank you!

@xnfctn

This comment has been minimized.

Copy link

@xnfctn xnfctn commented Nov 28, 2018

see the pictures at https://github.com/arendst/Sonoff-Tasmota/wiki/Gosund-SP1

that worked, thanks!

@gunmetaldjs

This comment has been minimized.

Copy link

@gunmetaldjs gunmetaldjs commented Dec 9, 2018

Anyone got lucky using the hardware button in the BlitzWolf BW-SHP2 v2.3 ?

@HanSolo72

This comment has been minimized.

Copy link

@HanSolo72 HanSolo72 commented Dec 10, 2018

New Hardware revision Gosund SP1-C_V2.4 20181101
But looks like V2.3.
Here are the pictures: https://drive.google.com/drive/folders/1xmTNGbQpoYkIsagzl5wdrWzfieF8snJ5

gemu2015 pushed a commit to gemu2015/Sonoff-Tasmota that referenced this issue Jan 27, 2019
Add support for Gosund SP1 v2.3 Power Socket with Energy Monitoring (arendst#4297)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
9 participants
You can’t perform that action at this time.