Energy monitoring template & PowerOnState

[BostonMikeGetHub]

I installed tasmota 6.5.0 on an AWP04L energy monitoring plug. I then installed the template for this plug from https://blakadder.github.io/templates/awp04l.html

All worked including the energy monitoring. However when power is removed then restored, the relay remains on but the website and the power light indicate off. Pressing the button corrects the state indicated by the light and website.

PowerOnState = 3

Can this be fixed by tasmota or the template?

[blakadder]

That could be a template issue which you will have to debug and correct yourself

[BostonMikeGetHub]

The template works perfectly and does not have any issues as long as power is not lost to the device

The problem is when PowerOnState is set to the defaul of 3, the device is on and it lost power then power returns. It has no problem when PowerOnState is 0. Apparently tasmota is not setting the state of the light to the same as the relay during the power on.

I will investigate the template but I hope someone with knowage of tasmota will look into what I said above.

@blakadder you appear to be the owner of the templates on GitHub. I tried to put the below note on the template description but I don't have permission. Please put something like the following note on the template page. Thanks.

"Their is an issue when using this template with tasmota 6.5.0. See issue 5594 for additional information."

[ascillato2]

Hi,

I could not reproduce your issue.

Please, could you be so kind on completing the troubleshooting template in order to have more information so as to properly help you? Also, please, add the console output at Tasmota starts. Remember to put the weblog to 4 before that.

Remember to read the Contributing Guideline and Policy. Thanks.

---

Support Information (Guide)

See Wiki for more information.
See Chat for more user experience.
See Community for forum.
See Code of Conduct

[BostonMikeGetHub]

BUG DESCRIPTION

I installed tasmota 6.5.0 on an AWP04L energy monitoring plug. I then installed the template for this plug from https://blakadder.github.io/templates/awp04l.html

{"NAME":"AWP04L","GPIO":[57,255,255,131,255,134,0,0,21,17,132,56,255],"FLAG":0,"BASE":18}

All worked including the energy monitoring. However when power is removed then restored from/to the device, the relay remains on (supplying power to the load) but the website and the power light indicate off. Pressing the button corrects the state indicated by the light and website.

REQUESTED INFORMATION

• Read the Contributing Guide and Policy and the Code of Conduct

• Searched the problem in issues (https://github.com/arendst/Sonoff-Tasmota/issues)

• Searched the problem in the wiki (https://github.com/arendst/Sonoff-Tasmota/wiki/Troubleshooting)

• Searched the problem in the forum (https://groups.google.com/d/forum/sonoffusers)

• Searched the problem in the chat (https://discord.gg/Ks2Kzd4)

• Device used (i.e. Sonoff Basic) : An AWP04L power monitoring plug from the Amazon website given on the https://www.amazon.com/Smart-Outlet-Compatible-Alexa-Google/dp/B07LGSBFNJ

• Tasmota binary firmware version number used : 6.5.0 pre-complided "6.5.0(release-basic)"

• [x ] Development IDE - Compiler / Upload tools used :
  OTA update from tasmota, sonoff-minimal.bin

• Provide the output of command status 0 :

STATUS 0 OUTPUT HERE:
Status 0
23:12:01 SRC: WebConsole from 192.168.1.203
23:12:01 RSL: Received Topic /Status, Data Size 1, Data 0
23:12:01 RSL: Group 0, Index 1, Command STATUS, Data 0
23:12:01 MQT: stat/PMPlug-6/STATUS = {"Status":{"Module":0,"FriendlyName":["PMPlug-6"],"Topic":"PMPlug-6","ButtonTopic":"0","Power":0,"PowerOnState":3,"LedState":1,"SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":1}}
23:12:01 MQT: stat/PMPlug-6/STATUS1 = {"StatusPRM":{"Baudrate":115200,"GroupTopic":"sonoffs","OtaUrl":"http://thehackbox.org/tasmota/release/sonoff-basic.bin","RestartReason":"Power on","Uptime":"0T00:01:55","StartupUTC":"2019-04-13T03:10:06","Sleep":50,"CfgHolder":4617,"BootCount":17,"SaveCount":84,"SaveAddress":"F8000"}}
23:12:01 MQT: stat/PMPlug-6/STATUS2 = {"StatusFWR":{"Version":"6.5.0(release-basic)","BuildDateTime":"2019-03-19T12:25:14","Boot":4,"Core":"2_3_0","SDK":"1.5.3(aec24ac9)"}}
23:12:01 MQT: stat/PMPlug-6/STATUS3 = {"StatusLOG":{"SerialLog":0,"WebLog":4,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["UAPAC01",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008029","280500000100000000000000000000000000","00000008"]}}
23:12:01 MQT: stat/PMPlug-6/STATUS4 = {"StatusMEM":{"ProgramSize":432,"Free":568,"Heap":17,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1440A1","FlashMode":3,"Features":["00000809","0F082380","000483A0","21021706","000001C0"]}}
23:12:01 MQT: stat/PMPlug-6/STATUS5 = {"StatusNET":{"Hostname":"PMPlug-6-8146","IPAddress":"192.168.1.66","Gateway":"192.168.1.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.1.1","Mac":"5C:CF:7F:6C:1F:D2","Webserver":2,"WifiConfig":4}}
23:12:01 MQT: stat/PMPlug-6/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.1.232","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_6C1FD2","MqttUser":"DVES_USER","MqttCount":1,"MAX_PACKET_SIZE":1000,"KEEPALIVE":15}}
23:12:01 MQT: stat/PMPlug-6/STATUS7 = {"StatusTIM":{"UTC":"Sat Apr 13 03:12:01 2019","Local":"Fri Apr 12 23:12:01 2019","StartDST":"Sun Mar 10 02:00:00 2019","EndDST":"Sun Nov 03 02:00:00 2019","Timezone":99,"Sunrise":"06:08","Sunset":"19:21"}}
23:12:01 MQT: stat/PMPlug-6/STATUS9 = {"StatusPTH":{"PowerDelta":80,"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}}
23:12:01 MQT: stat/PMPlug-6/STATUS10 = {"StatusSNS":{"Time":"2019-04-12T23:12:01","ENERGY":{"TotalStartTime":"2019-04-03T20:07:17","Total":1.284,"Yesterday":1.187,"Today":0.016,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}}
23:12:01 MQT: stat/PMPlug-6/STATUS11 = {"StatusSTS":{"Time":"2019-04-12T23:12:01","Uptime":"0T00:01:55","Vcc":3.138,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"POWER":"OFF","Wifi":{"AP":1,"SSId":"UAPAC01","BSSId":"80:2A:A8:51:E3:F4","Channel":11,"RSSI":88,"LinkCount":1,"Downtime":"0T00:00:03"}}}
23:12:10 WIF: Checking connection...
23:12:10 WIF: Connected

• Provide the output of console when you experience your issue if apply :

(Please use weblog 4 for more debug information)

CONSOLE OUTPUT HERE:

00:00:00 CFG: Loaded from flash at FA, Count 82
00:00:00 SRC: Restart
00:00:00 Project sonoff PMPlug-6 Version 6.5.0(release-basic)-2_3_0
00:00:00 CFG: Saved to flash at F9, Count 83, Bytes 3584
00:00:00 WIF: Checking connection...
00:00:00 WIF: Attempting connection...
00:00:00 WIF: Patch issue 2186
00:00:00 WIF: Connecting to AP1 UAPAC01 in mode 11N as PMPlug-6-8146...
00:00:01 WIF: Checking connection...
00:00:01 WIF: Attempting connection...
00:00:02 WIF: Checking connection...
00:00:02 WIF: Attempting connection...
00:00:03 WIF: Checking connection...
00:00:03 WIF: Connected
00:00:03 HTP: Web server active on PMPlug-6-8146 with IP address 192.168.1.66
00:00:03 APP: (UTC) Sat Apr 13 03:10:09 2019, (DST) Sun Mar 10 02:00:00 2019, (STD) Sun Nov 03 02:00:00 2019
23:10:10 HTP: Console
23:10:10 MQT: Attempting connection...
23:10:11 MQT: Connected
23:10:11 MQT: tele/PMPlug-6/LWT = Online (retained)
23:10:11 MQT: cmnd/PMPlug-6/POWER = 
23:10:11 MQT: Subscribe to cmnd/PMPlug-6/#
23:10:11 MQT: Subscribe to cmnd/sonoffs/#
23:10:11 MQT: Subscribe to cmnd/DVES_6C1FD2_fb/#
23:10:11 MQT: tele/PMPlug-6/INFO1 = {"Module":"AWP04L","Version":"6.5.0(release-basic)","FallbackTopic":"cmnd/DVES_6C1FD2_fb/","GroupTopic":"sonoffs"}
23:10:11 MQT: tele/PMPlug-6/INFO2 = {"WebServerMode":"Admin","Hostname":"PMPlug-6-8146","IPAddress":"192.168.1.66"}
23:10:11 MQT: tele/PMPlug-6/INFO3 = {"RestartReason":"Power on"}
23:10:11 MQT: stat/PMPlug-6/RESULT = {"POWER":"OFF"}
23:10:11 MQT: stat/PMPlug-6/POWER = OFF (retained)
23:10:16 APP: Boot Count 17
23:10:17 CFG: Saved to flash at F8, Count 84, Bytes 3584
23:10:20 MQT: tele/PMPlug-6/STATE = {"Time":"2019-04-12T23:10:19","Uptime":"0T00:00:13","Vcc":3.138,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":22,"POWER":"OFF","Wifi":{"AP":1,"SSId":"UAPAC01","BSSId":"80:2A:A8:51:E3:F4","Channel":11,"RSSI":92,"LinkCount":1,"Downtime":"0T00:00:03"}}
23:10:20 MQT: tele/PMPlug-6/SENSOR = {"Time":"2019-04-12T23:10:20","ENERGY":{"TotalStartTime":"2019-04-03T20:07:17","Total":1.270,"Yesterday":1.187,"Today":0.002,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
23:10:30 WIF: Checking connection...
23:10:30 WIF: Connected

TO REPRODUCE

Steps to reproduce the behavior:
One everything is installed:

1. Connect the device to AC power.
2. Connect a load to the device like a space heater.
3. Press the button on the device to supply power to the load.
4. Remove power from the device. (AWP04L plug)
5. Reapply power to the device. (AWP04L plug)

The load had power after step 5 as it should. However the device indicates otherwise.

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.
Screen shot with OFF is with the issue (device power removed then restored, the load had power but the device does not indicate this.
Screen shot with ON is normal condition.

ADDITIONAL CONTEXT

Add any other context about the problem here.
the output of command status 0 is after I had the issue. I removed then restored power to the device.

[ascillato2]

Hi,

Thanks for completing the template and sharing the requested information. Very appreciated.

After the device boots, if you refresh the web page, it still shows OFF while the relay is ON?

[BostonMikeGetHub]

Thank you for looking into this.

Yes, it still shows OFF while the relay is ON after I refresh the web page.

Pressing the device button or TOGGLE on the web page puts the device's light and web page indicating ON state while the relay remain that.

Basically the device always indicate OFF when it powers up regardless of its state when the device lost power.

[ascillato2]

Let's try a test.

Please, could you go to extra configuration menu and disable mqtt?

Then please try again to toggle to ON, remove power and power it again.

[BostonMikeGetHub]

Samething. The relay is on but the device light and website indicates off.

Below is console after I reapply power.
I did a status 0 at the end.

00:00:00 CFG: Loaded from flash at FB, Count 145
00:00:00 SRC: Restart
00:00:00 Project sonoff PMPlug-6 Version 6.5.0(release-basic)-2_3_0
00:00:00 CFG: Saved to flash at FA, Count 146, Bytes 3584
00:00:00 WIF: Checking connection...
00:00:00 WIF: Attempting connection...
00:00:00 WIF: Patch issue 2186
00:00:00 WIF: Connecting to AP1 UAPAC01 in mode 11N as PMPlug-6-8146...
00:00:01 WIF: Checking connection...
00:00:01 WIF: Attempting connection...
00:00:02 WIF: Checking connection...
00:00:02 WIF: Attempting connection...
00:00:03 WIF: Checking connection...
00:00:03 WIF: Connected
00:00:03 HTP: Web server active on PMPlug-6-8146 with IP address 192.168.1.66
00:00:03 RSL: INFO1 = {"Module":"AWP04L","Version":"6.5.0(release-basic)","FallbackTopic":"cmnd/DVES_6C1FD2_fb/","GroupTopic":"sonoffs"}
00:00:03 RSL: INFO2 = {"WebServerMode":"Admin","Hostname":"PMPlug-6-8146","IPAddress":"192.168.1.66"}
00:00:03 RSL: INFO3 = {"RestartReason":"Power on"}
00:00:03 RSL: RESULT = {"POWER":"OFF"}
00:00:03 RSL: POWER = OFF
00:00:03 APP: (UTC) Sun Apr 14 18:43:21 2019, (DST) Sun Mar 10 02:00:00 2019, (STD) Sun Nov 03 02:00:00 2019
14:43:22 HTP: Main Menu
14:43:28 APP: Boot Count 34
14:43:28 CFG: Saved to flash at F9, Count 147, Bytes 3584
14:43:30 RSL: STATE = {"Time":"2019-04-14T14:43:30","Uptime":"0T00:00:12","Vcc":3.137,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"POWER":"OFF","Wifi":{"AP":1,"SSId":"UAPAC01","BSSId":"80:2A:A8:51:E3:F4","Channel":11,"RSSI":100,"LinkCount":1,"Downtime":"0T00:00:03"}}
14:43:30 RSL: SENSOR = {"Time":"2019-04-14T14:43:30","ENERGY":{"TotalStartTime":"2019-04-03T20:07:17","Total":1.361,"Yesterday":0.000,"Today":0.010,"Period":2,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
14:43:41 WIF: Checking connection...
14:43:41 WIF: Connected
14:43:43 HTP: Console
14:43:53 CMD: Status 0
14:43:53 SRC: WebConsole from 192.168.1.203
14:43:53 RSL: Received Topic /Status, Data Size 1, Data 0
14:43:53 RSL: Group 0, Index 1, Command STATUS, Data 0
14:43:53 RSL: STATUS = {"Status":{"Module":0,"FriendlyName":["PMPlug-6"],"Topic":"PMPlug-6","ButtonTopic":"0","Power":0,"PowerOnState":3,"LedState":1,"SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":1}}
14:43:53 RSL: STATUS1 = {"StatusPRM":{"Baudrate":115200,"GroupTopic":"sonoffs","OtaUrl":"http://thehackbox.org/tasmota/release/sonoff-basic.bin","RestartReason":"Power on","Uptime":"0T00:00:35","StartupUTC":"2019-04-14T18:43:18","Sleep":50,"CfgHolder":4617,"BootCount":34,"SaveCount":147,"SaveAddress":"F9000"}}
14:43:53 RSL: STATUS2 = {"StatusFWR":{"Version":"6.5.0(release-basic)","BuildDateTime":"2019-03-19T12:25:14","Boot":4,"Core":"2_3_0","SDK":"1.5.3(aec24ac9)"}}
14:43:53 RSL: STATUS3 = {"StatusLOG":{"SerialLog":0,"WebLog":4,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["UAPAC01",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008021","280500000100000000000000000000000000","00000008"]}}
14:43:53 RSL: STATUS4 = {"StatusMEM":{"ProgramSize":432,"Free":568,"Heap":17,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1440A1","FlashMode":3,"Features":["00000809","0F082380","000483A0","21021706","000001C0"]}}
14:43:53 RSL: STATUS5 = {"StatusNET":{"Hostname":"PMPlug-6-8146","IPAddress":"192.168.1.66","Gateway":"192.168.1.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.1.1","Mac":"5C:CF:7F:6C:1F:D2","Webserver":2,"WifiConfig":4}}
14:43:53 RSL: STATUS7 = {"StatusTIM":{"UTC":"Sun Apr 14 18:43:53 2019","Local":"Sun Apr 14 14:43:53 2019","StartDST":"Sun Mar 10 02:00:00 2019","EndDST":"Sun Nov 03 02:00:00 2019","Timezone":99,"Sunrise":"06:05","Sunset":"19:23"}}
14:43:53 RSL: STATUS9 = {"StatusPTH":{"PowerDelta":80,"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}}
14:43:53 RSL: STATUS10 = {"StatusSNS":{"Time":"2019-04-14T14:43:53","ENERGY":{"TotalStartTime":"2019-04-03T20:07:17","Total":1.362,"Yesterday":0.000,"Today":0.011,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}}
14:43:53 RSL: STATUS11 = {"StatusSTS":{"Time":"2019-04-14T14:43:53","Uptime":"0T00:00:35","Vcc":3.136,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"POWER":"OFF","Wifi":{"AP":1,"SSId":"UAPAC01","BSSId":"80:2A:A8:51:E3:F4","Channel":11,"RSSI":84,"LinkCount":1,"Downtime":"0T00:00:03"}}}
14:44:01 WIF: Checking connection...
14:44:01 WIF: Connected

[BostonMikeGetHub]

I am able to reproduce bug #5663

1. PowerOnState = 0.
2. Power on the device by pressing the button.
3. Restart the device by pressing Restart on its web page.

After restart, the relay, and light are on (should be off). Power monitoring is also active.

The above is regardless of mqtt being enabled or not.

However, with PowerOnState = 0, the device now operates correctly when I remove power then restore power to the device.

[BostonMikeGetHub]

I believe issues #5594 and #5663 are related. Issue #5594 (this issue) occurs when PowerOnState = 3. Issue #5663 occurs when PowerOnState = 0.

[BostonMikeGetHub]

I will be happy to test both error conditions when a possible solution is found.