Skip to content
Permalink
Browse files

Try to fix OPi Zero Wi-Fi and red led

Partially based on vendor fex: http://pastebin.com/480BYtj3
  • Loading branch information
ThomasKaiser committed Nov 8, 2016
1 parent 5fdb28b commit 10fd0c9eabdf69fbe2a91869c778cb12c7f6771e
Showing with 10 additions and 11 deletions.
  1. +10 −11 config/fex/orangepizero.fex
@@ -1,6 +1,6 @@
[product]
version = "100"
machine = "orangepi-one"
machine = "orangepi-zero"

[platform]
debug_mode = 1
@@ -22,7 +22,7 @@ fel_key_min = 2
logical_start = 40960
sprite_work_delay = 500
sprite_err_delay = 200
sprite_gpio0 = port:PA15<1><default><default><default>
sprite_gpio0 = port:PA17<1><default><default><default>
next_work = 3

[box_start_os]
@@ -37,7 +37,7 @@ led_state = 0
[boot_init_gpio]
used = 1
gpio0 = port:PL10<1><default><default><1>
gpio1 = port:PG11<1><default><default><1>
gpio1 = port:PA17<1><default><default><1>

[recovery_para]
used = 1
@@ -222,8 +222,8 @@ gpio_pin_2 = port:PA10<1><default><default><0>
leds_used = 1
green_led = port:PL10<1><default><default><1>
green_led_active_low = 0
blue_led = port:PA10<1><default><default><0>
blue_led_active_low = 0
red_led = port:PA17<1><default><default><0>
red_led_active_low = 0

[ths_para]
ths_used = 1
@@ -306,7 +306,7 @@ output_full = 1
hdmi_mode_check = 1

[disp_init]
disp_init_enable = 0
disp_init_enable = 1
disp_mode = 1
screen0_output_type = 2
screen0_output_mode = 11
@@ -412,8 +412,8 @@ vip_dev1_flash_mode =
vip_dev1_af_pwdn =

[tvout_para]
tvout_used =
tvout_channel_num =
tvout_used = 1
tvout_channel_num = 1
tv_en =

[tvin_para]
@@ -547,8 +547,7 @@ luns = 3
serial_unique = 0

[module_para]
module_num = 7
module_power0 = "vcc-wifi-33"
module_power0 = port:PA20<1><default><default><0>
module_power0_vol = 0
module_power1 =
module_power1_vol =
@@ -557,7 +556,7 @@ module_power2_vol =
module_power3 =
module_power3_vol =
chip_en =
lpo_use_apclk =
lpo_use_apclk = "losc_out"

[wifi_para]
wifi_used = 1

1 comment on commit 10fd0c9

@ThomasKaiser

This comment has been minimized.

Copy link
Member Author

ThomasKaiser commented on 10fd0c9 Nov 9, 2016

module_power0_vol = 1 should also be needed. TBC.

Please sign in to comment.
You can’t perform that action at this time.